Skip to main content

1734 POINT I/O CVE-2026-10573

| EUVDEUVD-2026-43694 MEDIUM
Allocation of Resources Without Limits or Throttling (CWE-770)
2026-07-14 Rockwell GHSA-7jrm-8f72-vqwm
6.3
CVSS 4.0 · Vendor: Rockwell
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Gain access to OT/EtherNet/IP network
  2. Delivery
    Identify reachable 1734 POINT I/O module
  3. Exploit
    Send crafted CIP message
  4. Execution
    Trigger improper resource handling (CWE-770)
  5. Persist
    Module enters faulted state
  6. Impact
    I/O halted until manual restart

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A06:2025 - Insecure Design
ASVS 5.0
V2 - Validation and Business Logic Resource allocation limits
MITRE ATT&CK

1 technique across 1 tactic: Impact

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

Exploitation requires network reachability to a 1734 POINT I/O module's EtherNet/IP/CIP interface and the ability to send a crafted CIP message; per the CVSS vector (AV:N/AC:L/PR:N/UI:N) no authentication, privileges, or user interaction are needed against a reachable module. The primary limiting factor is network exposure: in correctly segmented OT architectures the module is not routable from IT or untrusted networks, so an attacker must first gain a foothold on the control network. Impact is limited to availability - the device faults and requires a manual restart to recover - with no confidentiality or integrity effect (VC:N/VI:N/VA:H).

Impact

The CVSS 4.0 vector (AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H) is internally consistent with the description: a network-reachable, low-complexity, unauthenticated attack with pure availability impact and no confidentiality or integrity loss. In IT terms this is a moderate score, but in an OT/ICS context a forced fault requiring manual restart of distributed I/O can halt a physical process, making real-world operational impact potentially severe. No EPSS score, KEV listing, or POC was provided, so exploitation likelihood cannot be quantified from the input; the practical exposure hinges almost entirely on whether the module is reachable from untrusted networks - in properly segmented OT environments the network vector is substantially constrained. No conflicting signals are present, though the absence of EPSS/POC data means exploitation probability is genuinely unknown rather than low.

Exploit ScenarioDerived

An attacker with access to the OT network - for example after pivoting from a compromised engineering workstation or through an inadequately segmented cell/area zone - sends a crafted CIP message to a 1734 POINT I/O module over EtherNet/IP. Because no authentication or user interaction is required (AV:N/PR:N/UI:N) and complexity is low, the malformed message drives the module into a faulted state, stopping I/O and forcing a manual restart to recover. No public exploit code has been identified, but the low attack complexity makes reliable disruption plausible once the device is reachable.

This Month Plan within 30 days. Why: MEDIUM severity (CVSS 4.0-6.9).
No patch listed yet 0.3% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Jul 14, 2026

Remote denial-of-service in Rockwell Automation's 1734 POINT I/O module allows unauthenticated network attackers to force the module into a faulted state by sending specially crafted CIP (Common Industrial Protocol) messages, halting I/O processing until a manual restart is performed. The CVSS 4.0 base score of 8.7 reflects a high availability impact against a network-reachable OT device with no privileges or user interaction required. There is no public exploit identified at time of analysis, and the flaw is not listed in CISA KEV.

RemediationAI

Consult Rockwell Automation advisory SD1779 (https://www.rockwellautomation.com/en-us/trust-center/security-advisories/advisory.SD1779.html) for vendor-provided firmware updates and affected catalog numbers; no exact fix version is present in the available input data, so apply the patched firmware version named in that advisory once identified. As compensating controls where patching is not immediately feasible, restrict CIP/EtherNet/IP access to the 1734 POINT I/O module by segmenting it onto a dedicated OT/control network behind a firewall or ICS-aware gateway and permitting CIP traffic (typically TCP/UDP 44818 and related EtherNet/IP ports) only from trusted engineering workstations and controllers - the trade-off is that overly strict filtering can break legitimate controller-to-I/O communication, so allowlists must include all valid CIP endpoints. Additionally, disable or block any external/remote routes to the OT VLAN and monitor for malformed CIP traffic; note that these network controls reduce exposure but do not remediate the underlying resource-handling flaw.

Affected VersionsENISA

1734 POINT I/O 3.023

Affected Packages

euvd 1734_point_i_o no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

The 1734 POINT I/O family is Rockwell/Allen-Bradley's modular distributed I/O system used in industrial automation, communicating over EtherNet/IP using the Common Industrial Protocol (CIP). The root cause is classified as CWE-770 (Allocation of Resources Without Limits or Throttling), indicating the module fails to properly bound or validate resources when parsing crafted CIP messages, driving the device into an unrecoverable faulted state. Because CIP/EtherNet/IP devices typically process messages without authentication in flat OT networks, a malformed request reaching the module's network interface is sufficient to disrupt its operation, and only a physical or commanded restart restores service.

Know when 1734 Point I O gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (Rockwell) PRIMARY 6.3 HIGH
CVSS:4.0/AV:N/AC:H/AT:P/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:N
vuln.today AI 7.5 HIGH

Unauthenticated network CIP message (AV:N/AC:L/PR:N/UI:N) causes module fault with availability-only impact (A:H) and no confidentiality or integrity effect.

3.1 AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
4.0 AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N

Primary rating from Vendor (Rockwell).

CVSS VectorVendor: Rockwell

Attack Vector
Network
Attack Complexity
High
Attack Requirements
Present
Privileges Required
None
User Interaction
None
Vulnerable system: Confidentiality
None
Vulnerable system: Integrity
None
Vulnerable system: Availability
Low
Subsequent system: Confidentiality
None
Subsequent system: Integrity
None
Subsequent system: Availability
None

Lifecycle Timeline

3
Severity Changed
Aug 27, 2026 - 17:22 NVD
HIGH MEDIUM
CVSS changed
Aug 27, 2026 - 17:22 NVD
8.7 (HIGH) 6.3 (MEDIUM)
CVE Published
Jul 14, 2026 - 14:54 cve.org
HIGH 8.7

DescriptionCVE.org

A denial-of-service security issue exists in 1734 POINT I/O™ module. The security issue stems from improper handling of crafted CIP messages, which can cause the module to enter a faulted state. A restart is required to recover.

Executive ViewAI

Why It Matters

Rockwell Automation 1734 POINT I/O modules contain a network-accessible vulnerability that allows remote attackers to force devices into a faulted state, disrupting I/O processing without requiring credentials. Affected organizations face unplanned downtime until manual intervention restores normal operations. This creates availability risk for any facility dependent on continuous I/O operations.

Business Impact: High
Compensating Controls

No vendor-released patch identified at time of analysis. Implement network segmentation restricting CIP protocol access to authorized systems; deploy industrial firewall rules blocking malformed CIP messages; enable network-based intrusion detection for suspicious CIP activity; and establish expedited restart procedures to minimize downtime from device faults.

Threat Intelligence Overview

EPSS Score
0.3%
Top 83% exploitable
Prevalence
Medium
widely used Allen-Bradley distributed I/O, but industry-specific to OT/ICS environments
Threat Intel
1
1 sources
Data Quality
7 sources
Confidence: High
EUVD NVD CVE.org EPSS Vulnrichment CISA VulDB

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity MEDIUM
CISA KEV No
Public POC No
EPSS 0.3%
Patch available No
Active threat Yes
Deciding rule
MEDIUM severity (CVSS 4.0-6.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision
Scheduled
Exploitation
None
System Exposure· derived
Open
Automatable
Yes
Human Impact
High
Technical Impact
Partial

Priority Score

42
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +32
PoC: 0
Weaponized: 0
Threat intel: +10
Gov advisory: 0

Attack Technique

Denial of Service attacks render applications or systems unavailable by overwhelming resources or triggering failure conditions.

Threat IntelligenceMISP

CISA Advisories
Sources: CISA Vulnrichment, CISA (public domain)

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy