Cross-origin information disclosure in Google Chrome prior to 155.0.8059.39 lets a remote attacker leak a limited amount of data from other origins when a victim loads a crafted HTML page that abuses an observable rendering discrepancy in Chrome's Animation implementation. Exploitation requires user interaction (the victim must open the attacker's page) and is rated high complexity (AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N, CVSS 3.1), reflecting repeated timing/rendering measurement rather than a straightforward one-shot extraction; there is no code execution, data modification, or denial of service, and no public exploit identified at time of analysis. CISA's SSVC assessment rates exploitation as 'none' and automation as 'no', and no KEV listing applies, so this is a low-priority, low-real-risk issue despite affecting a ubiquitous browser.
Cross-origin information disclosure in Google Chrome (desktop stable channel) affects releases prior to 155.0.8059.39, where an observable discrepancy in the browser's Scroll behavior can be measured to infer data from other origins. Exploitation is not possible simply by visiting a web page: the attacker must first get the victim to install a crafted Chrome extension, which is the user-interaction requirement (UI:R) and the main driver of the high attack-complexity rating (AC:H) in the assessed vector CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N. No public exploit code has been identified at time of analysis, CISA's SSVC assessment records Exploitation as 'none' and Automatable as 'no' with partial technical impact, and the impact is confined to a low-confidentiality leak with no integrity or availability effect. This is a genuinely low-priority issue despite affecting a ubiquitous product, and the practical exposure window is further narrowed by Chrome's automatic update mechanism.
Missing authorization in Google Chrome's Google Lens component (versions prior to 155.0.8059.39) lets a remote, unauthenticated attacker read cross-origin data when a victim loads a crafted HTML page - but only after that attacker has already compromised the browser's renderer process, which is the gating precondition and makes this a chained, secondary flaw rather than a standalone entry point. Exploitation additionally requires user interaction (UI:R) and yields only low-severity confidentiality impact with no integrity or availability effect, so the assessed vector is CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N for a base score of 3.1, rated Medium by Chromium. Vendor-released patch: 155.0.8059.39; no public exploit identified at time of analysis, and no CISA KEV status or EPSS signal indicates active exploitation.
OpenSSH sshd builds compiled against the macOS 27 (or later) SDK silently lose their sandbox, removing a containment layer that normally limits the damage an attacker can do if they manage to compromise or corrupt the sshd process. Only OpenSSH through 10.6 built against that specific SDK is affected, which is far from the default configuration for Linux, BSD, or older-macOS deployments. This is a low-severity defense-in-depth regression rather than a directly exploitable flaw - the sandbox loss causes no impact on its own and only produces harm when chained with a separate exploitable sshd vulnerability that the sandbox would otherwise have contained; no public exploit was identified at time of analysis, and the CVSS 3.1 score (AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:L/A:N) reflects that chaining requirement and high attack complexity.
On iOS builds of Quasar Framework (all versions prior to 2.32.2), the openURL() utility can be tricked into invoking attacker-controlled page content instead of the native SafariViewController bridge, breaking external navigation, login redirects, and payment redirects with a thrown TypeError. The trigger requires an app built for iOS (Cordova/Capacitor where Platform.is.ios is true) plus a QEditor, QSelect, or QChatMessage configured to render untrusted HTML that can define an element named 'SafariViewController'; a legitimate user must then attempt a URL-opening action. Impact is limited to denial of the URL-opening function (CVSS 3.1, AV:N/AC:H/PR:N/UI:R, C:N/I:N/A:L) and the bug is fixed in 2.32.2; no public exploit code or confirmed active exploitation was identified at time of analysis.
Microsoft Kiota, the OpenAPI-based HTTP client code generator, fails to validate the x-ai-capabilities.response_semantics.oauth_card_path value before copying it into a generated API plugin manifest, allowing path-traversal or absolute-URI references to survive into the manifest in versions 1.25.1 through 1.34.x. An attacker who controls or compromises the OpenAPI description can inject a malicious oauth_card_path (for example '../../../../etc/passwd', 'C:\\Windows\\...', a UNC path, or 'file:///etc/passwd') so that a downstream host resolving the plugin manifest crosses the intended plugin-package boundary or loads an unintended authentication card. The attacker vector is network-based and unauthenticated (PR:N), but exploitation requires a developer to actively run Kiota generation against the malicious description and a separate downstream consumer to resolve the reference; Kiota performs no file read or code execution during generation itself, so impact is limited to low integrity (I:L) and there is no public exploit identified at time of analysis. The issue is fixed in version 1.35.0.
This is a genuinely low-priority issue by every available signal, not a high-CVSS alarm. Local privilege retention in OpenSSH sshd-session on obsolete platforms (QNX 6, SCO OpenServer 5) allows an authenticated user to cause sshd-session to run with root privileges when GatewayPorts or StreamLocalForwarding is enabled and the host lacks support for file-descriptor passing and unprivileged PTY allocation. Exploitation is confined to those specific configurations, no public exploit has been identified at time of analysis, and the assessed CVSS is 2.9.
Stored cross-site scripting in the Class2HTML report generator shipped with Apache Commons BCEL before 6.13.0 lets attacker-controlled strings from a Java class file (class, field and method names, constant-pool entries, attribute values and anchors) be written into generated HTML reports without escaping, so script executes in the browser of anyone who opens the report. The issue is unauthenticated (CVSS 4.0 PR:N) but highly conditional: the deployment must actually use the Class2HTML/AttributeHTML/CodeHTML/ConstantHTML utilities to render HTML from class files an attacker can influence, and a victim must then open the resulting report (UI:P), which is why the CVSS 4.0 base score is only 2.3 because attack requirements are present (AT:P) even though the independent assessment rates the same flaw 7.1 under CVSS 3.1 with scope change (S:C). This is not reachable through ordinary BCEL bytecode parsing or manipulation; no public exploit has been identified at time of analysis and the flaw is fixed in 6.13.0.
Memory disclosure in Arista access points configured with VXLAN tunnelling and L2-proxy (the VESPA use-case) lets an unauthenticated adjacent-network wireless client associated to a tunnelled SSID send a crafted packet and cause the AP to expose memory contents in network traffic. The flaw is an out-of-bounds read (CWE-125) rated CVSS 4.0 2.3, with the independent assessment bounding impact to low confidentiality loss only; no write primitive, integrity impact, availability impact, or remote code execution is possible. The issue is low priority despite alarmist RCE/buffer-overflow tags, and no public exploit was identified at time of analysis.
RediSearch query injection in @langchain/redis (the Redis vector store provider for LangChain.js) prior to version 1.1.1 lets a low-privileged attacker who can influence the values passed into structured RediSearch TAG or TEXT filters inject unescaped RediSearch syntax and thereby broaden or otherwise alter the generated search query. Where an application uses such a filter as a tenant or document-access boundary, the manipulated query can return indexed documents outside the attacker's intended scope, resulting in limited confidentiality impact (read/exposure only, no write, code execution, or availability effect). Exploitation is highly conditional: the assessed vector is CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:L/I:N/A:N (CVSS 4.0 base 2.3), no public exploit code has been identified, and no confirmed active exploitation (CISA KEV) or EPSS signal was provided, so overall risk is low; the fix is available in @langchain/redis 1.1.1.
Heap corruption in GNU Aspell's personal-wordlist handling lets a local attacker crash a user's spell-checking session by supplying a crafted dictionary file. All Aspell releases before 0.60.8.3 are affected: when a wordlist containing a word whose length is an exact multiple of 256 bytes is loaded, WritableDict::add() in modules/speller/default/writable.cpp stores the word length in a single byte, truncating it and corrupting heap memory, which results in denial of service rather than code execution or data disclosure. No public exploit identified at time of analysis, and the issue is not listed in CISA KEV; the vendor fix was published as commit 782ce94e4dc71eaec4ee1bd945eb3b9c47c5387d and is slated for release in version 0.60.8.3. With a CVSS 4.0 base score of 1.8 and an independent assessment of CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:L, this is a genuinely low-priority issue: the attack is local-only, needs the victim to actively load an attacker-supplied dictionary, requires the specific multiple-of-256 length condition, and yields availability loss only.
Heap out-of-bounds read in GNU Aspell's binary dictionary loader (ReadOnlyDict::load() in readonly_ws.cpp) lets a crafted .rws dictionary file trigger limited heap memory disclosure or a crash of the aspell process. The victim must deliberately run aspell against the attacker-supplied dictionary via --master, --dict-dir, or an equivalent configuration setting, so the vector is local, high-complexity and dependent on user interaction, and no privileges are required (PR:N). Impact is confined to limited information disclosure and denial of service with no code execution or integrity impact, and no public exploit has been identified at time of analysis.
GNU Aspell's prezip-bin decompressor suffers a heap-based buffer overflow (CWE-122) that lets a crafted prezip-compressed file corrupt heap memory and crash the process. The issue affects Aspell versions prior to 0.60.8.3 and is only reachable through a local chain: an attacker must deliver a malicious compressed file and then persuade a user to run prezip-bin against it, so no privileges are required (PR:N) but user interaction and high attack complexity apply. The assessed impact is availability-only (VC:N/VI:N/VA:L) with a low CVSS 4.0 base score of 1.8 and an equivalent CVSS 3.1 assessment of AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:L; no public exploit code has been identified at time of analysis and there is no CISA KEV listing. Multiple signals - trivial score, local-only vector, interaction requirement and crash-only outcome - converge on a genuinely low-priority issue.
In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: prevent authentication frame length truncation mwifiex_cfg80211_authenticate() derives the authentication frame length from req->ie_len and req->auth_data_len, both of type size_t, but stores it in a u16. NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is a u16, a single attribute can carry up to 65531 bytes of payload, so the sum can exceed U16_MAX before it is assigned to pkt_len. The truncated pkt_len determines the skb frame area, while the copy length remains req->auth_data_len - 4, resulting in a heap buffer overflow. For example, with auth_data_len equal to 65510 and no IEs, the sum is 65546. It is truncated to 10 and then reduced by four to 6. The driver appends only six bytes to the skb with skb_put(), but then copies 65506 user-provided bytes into the authentication body. Reaching this path requires CAP_NET_ADMIN in the user namespace owning the network namespace, an up station netdev, and a suitable BSS/SAE authentication request. Compute the length in size_t, reject values that cannot be represented by the firmware's u16 frame length field, and only then assign it to pkt_len.
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix server->total_read for compound encrypted PDUs In receive_encrypted_standard(), server->total_read is left at the full decrypted frame size when walking sub-PDUs of a compound encrypted frame. As a result, cifs_handle_standard() passes this full size to smb2_check_message(), causing the PDU length guards to incorrectly validate the entire compound frame instead of the current sub-PDU. This allows truncated non-last sub-PDUs to bypass length validation, leading to out-of-bounds reads in smb2_get_data_area_len(). Fix this by setting server->total_read to the true length of the current sub-PDU: next_cmd for non-last sub-PDUs, and the remaining pdu_length for the last one.
In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: initialize `options_len` before referencing options The following command triggers a kernel panic: ip link add d0 type dummy; ip link set d0 up ip route add 10.30.0.0/16 \ encap ip id 300 geneve_opts 4660:66:11223344 dev d0 memcpy: detected buffer overflow: 4 byte write of buffer size 0 kernel BUG at lib/string_helpers.c:1044! ... ip_tun_parse_opts.part.0.cold+0x10/0x10 ip_tun_build_state+0x116/0x2a0 On kernels built with GCC 15+ and `CONFIG_FORTIFY_SOURCE`, the fortified `memcpy()` got 0 sized destination with request of 4 bytes length: static int ip_tun_parse_opts_geneve(...) { ... attr = tb[LWTUNNEL_IP_OPT_GENEVE_DATA]; data_len = nla_len(attr); /* == 4 */ struct geneve_opt *opt = ip_tunnel_info_opts(info) + opts_len; memcpy(opt->opt_data, nla_data(attr), data_len); /* ^^^^^^^^^^^^^ 0 since options_len is assigned afterwards */ Fixed by initializing the counter before the options are referenced. Matching what `tunnel_key_opts_set()` already does.
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_nat: fully initialise new_addr in netmap setup nft_nat_setup_netmap() builds the mapped address in an on-stack union nf_inet_addr. For an IPv4 mapping it writes only the 4-byte .ip member and the loop runs a single 32-bit iteration, but it then copies the whole 16-byte union into range->min_addr and range->max_addr, so the upper 12 bytes reach nf_nat_setup_info() uninitialised. KMSAN reports an uninit-value in nf_nat_setup_info() reached from nft_nat_eval(). The IPv6 path fills all 16 bytes and is not affected. Zero-initialise new_addr.
In the Linux kernel, the following vulnerability has been resolved: drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr When an out_fence_ptr is provided but DRM_MODE_PAGE_FLIP_EVENT is not set, a drm_pending_vblank_event will be allocated. If later, there is an allocation failure or another failure at setup_out_fence(), that event will not have base.fence set and it will not be released at complete_signaling(). Release the event and set crtc_state->event to NULL just like in the DRM_MODE_PAGE_FLIP_EVENT case when there is a failure at drm_event_reserve_init(). That is, prepare_signaling() releases the event and there is nothing to be done at complete_signaling(). Use drm_event_cancel_free() as that will also undo drm_event_reserve_init() in case it has been called.
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Ack RX overrun interrupt correctly The RX overrun interrupt is reported in interrupt status register 4, but gmac_irq() acknowledges it using the RX descriptor error bit from status register 0. For GMAC0 this writes the GMAC1 overrun bit, while for GMAC1 the shift leaves no bit in the 32-bit register. Acknowledge the same per-port RX overrun bit that was detected.
In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: cap hh_flows_limit at change time hhf_change() stores TCA_HHF_HH_FLOWS_LIMIT with no upper bound. A huge hh_flows_limit lets each new heavy-hitter flow pass the hh_flows_current_cnt check in alloc_new_hh() and forces a fixed-size kzalloc(GFP_ATOMIC) per flow under spoofed traffic, for unbounded memory growth. Bound the attribute with NLA_POLICY_MAX() at 2*HH_FLOWS_CNT (the hhf_init() default) and report the rejected value via extack. The deprecated nested parse is kept: legacy tc does not set NLA_F_NESTED on TCA_OPTIONS. Configs relying on hh_limit above the default were relying on unbounded, unsafe behaviour and are not supported going forward. hhf_init() also ran hhf_change() before setting the default hh_flows_limit, so a user-supplied hh_limit at add time was clobbered back to 2048. Set the default before hhf_change() so the configured value sticks. This is a follow-up to commit eb56a495f59b ("net/sched: hhf: clamp quantum in change and init paths"), which bounded the quantum of the same qdisc; the hh_flows_limit bound is the remaining unbounded knob of that series' scope. Conditions to recreate the bug: CAP_NET_ADMIN in a user namespace; tc qdisc change dev X root hhf hh_limit 4294967295 succeeds and the value is echoed by tc qdisc show, unbounding heavy-hitter flow allocations; also tc qdisc add dev X root hhf hh_limit 500 stores 2048 instead of 500.
In the Linux kernel, the following vulnerability has been resolved: net/packet: clear RX owner on VNET header error Commit 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race condition") added rx_owner_map and made tpacket_rcv() claim a V1 or V2 ring slot before converting the virtio-net header. If the conversion fails, the drop path leaves the slot claimed. With a one-frame TPACKET_V2 ring, an unsupported UDP GSO packet leaves the only slot unavailable, so the ring also drops the next valid packet. Clear the ownership bit on this error path. TPACKET_V3 already clears its block state here.
In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-aspeed: Remove children before releasing SDC resources Probe failure and removal leave SDHCI child devices registered after the parent clock and managed resources are released. Unregister the OF children in reverse order before disabling the parent clock on both paths. Use of_platform_device_destroy() because manual child creation does not set the flag required by of_platform_depopulate(). This issue was identified during our ongoing static-analysis research while reviewing kernel code.
In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate curve data length in the calibration curve converters p54_convert_rev0() and p54_convert_rev1() read calibration curve data from the device-supplied EEPROM entry using channel and points-per-channel counts taken verbatim from that same entry, so an entry that declares more data than it carries drives an out-of-bounds read past the EEPROM buffer (verified with a KASAN reproducer of the conversion loop). The sibling converters p54_convert_output_limits() and p54_convert_db() already validate their counts against the entry length; this path was missed. Reject the entry when the counts do not fit in the entry data.
In the Linux kernel, the following vulnerability has been resolved: selinux: recheck intermediate backing files on mprotect() mprotect() can be used to bypass the SELinux checks that mmap() performs against the intermediate layers of a stacked filesystem. mmap() checks every backing layer as the request descends through the stack. mprotect() only has the lowest backing file in vma->vm_file, so it rechecks the top-level user and the lowest mounter, but skips the mounters of every layer in between. With two nested overlayfs mounts and a policy denying mounter_t -> middle_file_t:file { execute }, a direct mmap(PROT_EXEC) is denied: avc: denied { execute } for pid=71 comm="nested_exec" path="/payload" dev="overlay" ino=9 scontext=user_u:base_r:mounter_t tcontext=user_u:object_r:middle_file_t tclass=file permissive=0 while mmap(PROT_NONE) followed by mprotect(PROT_EXEC) succeeds. Preserve each intermediate path, mounter SID and file-description SID in the backing-file security blob, copying the saved entries when another backing layer is opened. Allocate the array only for nested backing files, and release it and the path references in the backing_file_free hook. During mprotect(), recheck fd { use } and the requested inode permissions for every saved mounter, and include the intermediate layers in the execmod checks. Policy for nested stacking may then need to grant intermediate mounters what a direct mmap() already requires, and execmod on intermediate labels for binaries using text relocations. Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built SELinux policy, on a mainline tree containing commit f2381b546e7e ("fs: fix user path of nested backing files"). [PM: subject tweak]
In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: reset device before deleting virtqueues virtsnd_remove() and virtsnd_freeze() delete the virtqueues before resetting the device. del_vqs() frees the vring backing, but does not provide a generic device quiesce operation. In particular, modern virtio-pci keeps enabled queues active until the device is reset. Reset the device before deleting the virtqueues so it can no longer access the vring memory when that memory is released. This also covers probe failures after DRIVER_OK, which unwind through virtsnd_remove().
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_codec: validate vendor codec count length The Read Local Supported Codecs parsers consume the variable-sized standard codec array before parsing the vendor codec count. Although the initial reply-size check includes a vendor count byte in the fixed layout, it does not guarantee that the byte remains after the standard codec array. If a controller reply ends immediately after that array, calculating the vendor codec array size reads vnd_codecs->num beyond the skb data. Use skb_pull_data() to validate and consume each codec header before using its count in both command variants.
In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix tpm2_load_cmd() boundary check tpm2_load_cmd() does boundary checks against the ASN.1 size i.e., payload->blob_len. Address this by passing the decoded blob size to tpm2_load_cmd(), and use it for the boundary checks.
In the Linux kernel, the following vulnerability has been resolved: mmc: core: Cancel SDIO IRQ work before freeing host A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work from its interrupt handler. That work is only cancelled on the suspend path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed just before the controller freed its IRQ can run after mmc_host_classdev_release() has freed the host and dereference it through container_of(). Cancel host->sdio_irq_work in mmc_free_host(), like the existing host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel delayed work before releasing host"). This issue was found by an in-house static analysis tool.
In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) increase number of phases and add new mask Increase the number of phases to 16 as a new upcoming device supports such a number. While at it, add a new mask for controlling the source of the output voltage. Note (groeck): This patch was meant to prepare for support of MAX20826 and compatible devices, which support more than 10 phases per page. However, Sashiko reports that the mp2975 driver already supports up to 14 phases, and the mp2856 driver supports up to 12 phases. This already has the potential for out-of-bounds writes when probing the affected chips, making this patch a bug fix.
In the Linux kernel, the following vulnerability has been resolved: drm/gud: fix out-of-bounds write in gud_plane_atomic_check() The plane property loop uses req->properties[num_properties + i] as write index while simultaneously incrementing `num_properties` inside the loop. At iteration i, num_properties has also incremented by i, so the write is done at `initial_num_properties + 2*i`, skipping every other index and advancing by 2 per iteration. With just 2 connector and 32 plane properties the last write happens at index 64, one slot past the end of the 64-slot (indices 0-63) allocation. A USB device can trigger OOB by advertising the maximum number of properties. Fix by dropping the redundant `+ i`; num_properties is already the correct running index, as gud_connector_fill_properties() fills the preceding slots.
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbd_connection leak on cifs_get_tcp_session() error When an RDMA connection is successfully established via smbd_get_connection() but cifs_get_tcp_session() later fails (e.g. kthread_create() returns an error), the error path frees tcp_ses without first destroying the smbd_connection. Fix this by calling smbd_destroy() in the out_err cleanup path before kfree(tcp_ses). smbd_destroy() safely handles the case where smbd_conn is NULL, so it can be called unconditionally.
In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix potential UAF after asynchronous card release Usually a sound driver releases the resources assigned to the card via snd_card_free(), and it synchronizes with the whole release procedure. However, when the card is released asynchronously via snd_card_free_when_closed() like USB-audio driver, the situation is slightly different; although the snd_card_disconnect() call at the disconnection guarantees that any newer accesses will be gated, the in-flight tasks might be still accessing to the underlying card->dev device even after the disconnection, which would cause a use-after-free in the end, as reported by fuzzers. For addressing the bug above, this patch takes the refcount of card->dev at initialization of the card object, and releases at its destructor. This assures the availability of the card->dev in its whole lifecycle.
In the Linux kernel, the following vulnerability has been resolved: arm64: percpu: Fix LSE operations on {8,16}-bit types The assembly for __percpu_##name##_case_##sz() and __percpu_##name##_return_case_##sz() doesn't use the 'sfx' macro argument to form the LSE instruction. Without 'sfx', a W register argument will imply a 32-bit memory location, and consequently {8,16}-bit ops will erroneously read and write 32 bits of memory when the LSE instruction is used. Fix this by appending 'sfx' to 'op_lse' to LSE instruction. It is not necessary (and not valid) to append 'sfx' to 'op_llsc', as 'op_llsc' is a register-register operation which does not access memory (and does not take a size suffix).
In the Linux kernel, the following vulnerability has been resolved: btrfs: take commit root semaphore when iterating in mark_block_group_to_copy() mark_block_group_to_copy() iterates over the commit root with skip_locking=true. A concurrent transaction commit can swap and free the commit root during iteration, causing use-after-free when accessing extent buffers. Fix it by using path->need_commit_sem to protect the commit root search.
In the Linux kernel, the following vulnerability has been resolved: xfrm: serialize state GC with device state flush The deferred-device pass in xfrm_dev_state_flush() finds states under xfrm_state_dev_gc_lock, but drops the lock before calling xfrm_dev_state_free() because the driver callback may sleep. The device GC list does not hold an xfrm_state reference, so the state GC worker can destroy the same state concurrently. The race can proceed as follows: CPU 0 CPU 1 find x on the device GC list drop xfrm_state_dev_gc_lock read x->xso.dev xfrm_state_gc_destroy(x) xfrm_dev_state_free(x) xfrm_state_free(x) continue xfrm_dev_state_free(x) Both paths can invoke the driver callback and drop the device reference. CPU 0 can also access the xfrm_state after CPU 1 has freed it. KASAN reported: BUG: KASAN: slab-use-after-free in xfrm_dev_state_free+0x24c/0x2a0 Read of size 8 at addr ffff88810bbaa960 by task poc/102 Call Trace: xfrm_dev_state_free+0x24c/0x2a0 xfrm_dev_state_flush+0x353/0x400 xfrm_dev_event+0x26d/0x3a0 notifier_call_chain+0xc0/0x280 __dev_notify_flags+0x169/0x250 netif_change_flags+0xe7/0x160 dev_change_flags+0x96/0x220 devinet_ioctl+0x7f4/0x1880 Allocated by task 87: xfrm_state_alloc+0x1e/0x5c0 xfrm_add_sa+0xe7f/0x5820 xfrm_user_rcv_msg+0x4f3/0x940 Freed by task 57: kmem_cache_free+0xcb/0x3d0 xfrm_state_gc_task+0x4a8/0x650 process_one_work+0x63a/0x1070 Serialize xfrm_state destruction against the deferred-device pass with a mutex. Keep xfrm_state_dev_gc_lock limited to list operations and retain the existing callback and device-reference release ordering.
In the Linux kernel, the following vulnerability has been resolved: KEYS: encrypted: fix integer overflow of datablob_len encrypted_key_alloc() stores datablob_len in a u16. It is computed from multiple string and payload lengths. If the result exceeds U16_MAX, the assignment truncates the allocation size. KASAN reports a 32760-byte slab-out-of-bounds write when __ekey_init() copies the master key description into the undersized buffer. The total payload length stored in key->datalen is also a u16. Use check_add_overflow() to reject values that do not fit either destination, and use kzalloc_flex() for the flexible-array allocation.
In the Linux kernel, the following vulnerability has been resolved: selinux: preserve user SID across nested backing files SELinux saves the user file SID in a backing-file security blob so it remains available after mmap() replaces vma->vm_file with a backing file. For nested backing files (overlayfs over overlayfs, or FUSE passthrough backed by overlayfs), user_file may itself be a backing file. Its fsec->sid is the SID of the mounter that opened it, rather than the user that opened the top-level file. mprotect() then checks fd { use } against the mounter SID. This can incorrectly deny access without a domain transition, or check the wrong target SID after one. Copy the saved user SID when user_file is a backing file. Keep using the regular file SID for the first backing layer. With two nested overlayfs mounts and SELinux enforcing, mprotect(PROT_READ) returns EACCES with an fd { use } denial against the mounter SID. With this change, mprotect() succeeds. Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built SELinux policy. The original test was also repeated with Fedora Cloud Base 44 userspace and gave the same result.
In the Linux kernel, the following vulnerability has been resolved: mmc: hsq: Fix use-after-free in retry work mmc_hsq_pump_requests() queues retry_work when request_atomic() returns -EBUSY; today sdhci-sprd is the only consumer that implements request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but is never cancelled during driver removal. Work still pending at unbind can therefore run after the devm allocation has been released and dereference hsq->mmc and hsq->mrq. Use devm_work_autocancel() to cancel and drain retry_work before the devm allocation is released. By the time devres cleanup begins, mmc_remove_host() has already stopped the host, so no new requests can arm the work. This issue was found by an in-house static analysis tool.
In the Linux kernel, the following vulnerability has been resolved: mmc: mmci: Fix use-after-free in busy-timeout work ux500_busy_complete() can queue ux500_busy_timeout_work for an R1b command, but mmci_remove() never cancels it. The work can subsequently dereference the devm-allocated mmci_host after it has been released. Mask the controller interrupts and disable the delayed work during removal. This drains any queued instance and stops an IRQ handler that is still in progress from queueing the work again once it has been disabled. This issue was found by an in-house static analysis tool.
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs() In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is insufficient. It allows iteration to continue even if the remaining src_size is too small to contain a complete smb2_ea_info structure. Consequently, reads of ea_name_length and ea_value_length can occur out-of-bounds. Fix this by ensuring src_size >= sizeof(*src) before attempting to read any structure fields. Additionally, reject any next_entry_offset that is smaller than sizeof(*src) or that would advance the pointer beyond the available buffer. Note that for calls where the server returns a malformed EA list, the error returned to userspace changes from -ENODATA (getxattr) or -ERANGE (listxattr) to -EIO. This correctly signals a server protocol error rather than misleadingly indicating "attribute not present" or "output buffer too small".
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix reparse buffer bounds in cifs_query_reparse_point() In cifs_query_reparse_point(), the start >= end check before casting to struct reparse_data_buffer * only ensures the start pointer is within the response. It fails to verify that there is enough space remaining for the fixed 8-byte header of the structure. If a server provides a DataOffset that leaves less than 8 bytes remaining, the check passes, but subsequent reads of ReparseTag and ReparseDataLength will occur out-of-bounds. Fix this by ensuring the remaining space is at least the size of the reparse_data_buffer structure before accessing its fields.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate TX skb length in send_sync btintel_pcie_prepare_tx() copies skb->len bytes into a fixed BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy. Oversized packets are currently rejected only in btintel_pcie_send_frame(); any future caller of btintel_pcie_send_sync() would silently overflow the DMA buffer. Add the bounds check in btintel_pcie_send_sync() itself, right before skb_push() and the DMA copy.
In the Linux kernel, the following vulnerability has been resolved: fs/dax: check zero or empty entry before converting xarray entry Calling dax_to_folio() with empty entry causes kernel panic below when booting a VM with DAX enabled storage. This patch checks empty entry before calling dax_to_folio() on dax_associate_entry(), dax_disassociate_entry(), and dax_busy_page(). Commit 98c183a4fccf ("fs/dax: don't disassociate zero page entries") added guards in the associate and disassociate paths, but the guards still come after dax_to_folio(), and dax_busy_page() still has the same problem. [ 0.737679] EXT4-fs (pmem0p1): mounted filesystem 79676804-7c8b-491a-b2a6-9bae3c72af70 ro with ordered data mode. Quota mode: disabled. [ 0.737891] VFS: Mounted root (ext4 filesystem) readonly on device 259:1. [ 0.739119] devtmpfs: mounted [ 0.739476] Freeing unused kernel memory: 1920K [ 0.740156] Run /sbin/init as init process [ 0.740229] with arguments: [ 0.740286] /sbin/init [ 0.740321] with environment: [ 0.740369] HOME=/ [ 0.740400] TERM=linux [ 0.743162] Unable to handle kernel paging request at virtual address fffffdffbf000008 [ 0.743285] Mem abort info: [ 0.743316] ESR = 0x0000000096000006 [ 0.743371] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.743444] SET = 0, FnV = 0 [ 0.743489] EA = 0, S1PTW = 0 [ 0.743545] FSC = 0x06: level 2 translation fault [ 0.743610] Data abort info: [ 0.743656] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 0.743720] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 0.743785] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 0.743848] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000b9d17000 [ 0.743931] [fffffdffbf000008] pgd=10000000bfa3d403, p4d=10000000bfa3d403, pud=1000000040bfe403, pmd=0000000000000000 [ 0.744070] Internal error: Oops: 0000000096000006 [#1] SMP [ 0.748888] CPU: 0 UID: 0 PID: 1 Comm: init Not tainted 6.18.4 #1 NONE [ 0.749421] pstate: 004000c5 (nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.749969] pc : dax_disassociate_entry.constprop.0+0x20/0x50 [ 0.750444] lr : dax_insert_entry+0xcc/0x408 [ 0.750802] sp : ffff80008000b9e0 [ 0.751083] x29: ffff80008000b9e0 x28: 0000000000000000 x27: 0000000000000000 [ 0.751682] x26: 0000000001963d01 x25: ffff0000004f7d90 x24: 0000000000000000 [ 0.752264] x23: 0000000000000000 x22: ffff80008000bcc8 x21: 0000000000000011 [ 0.752836] x20: ffff80008000ba90 x19: 0000000001963d01 x18: 0000000000000000 [ 0.753407] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 0.753970] x14: ffffbf3154b9ae70 x13: 0000000000000000 x12: ffffbf3154b9ae70 [ 0.754548] x11: ffffffffffffffff x10: 0000000000000000 x9 : 0000000000000000 [ 0.755122] x8 : 000000000000000d x7 : 000000000000001f x6 : 0000000000000000 [ 0.755707] x5 : 0000000000000000 x4 : 0000000000000000 x3 : fffffdffc0000000 [ 0.756287] x2 : 0000000000000008 x1 : 0000000040000000 x0 : fffffdffbf000000 [ 0.756871] Call trace: [ 0.757107] dax_disassociate_entry.constprop.0+0x20/0x50 (P) [ 0.757592] dax_iomap_pte_fault+0x4fc/0x808 [ 0.757951] dax_iomap_fault+0x28/0x30 [ 0.758258] ext4_dax_huge_fault+0x80/0x2dc [ 0.758594] ext4_dax_fault+0x10/0x3c [ 0.758892] __do_fault+0x38/0x12c [ 0.759175] __handle_mm_fault+0x530/0xcf0 [ 0.759518] handle_mm_fault+0xe4/0x230 [ 0.759833] do_page_fault+0x17c/0x4dc [ 0.760144] do_translation_fault+0x30/0x38 [ 0.760483] do_mem_abort+0x40/0x8c [ 0.760771] el0_ia+0x4c/0x170 [ 0.761032] el0t_64_sync_handler+0xd8/0xdc [ 0.761371] el0t_64_sync+0x168/0x16c [ 0.761677] Code: f9453021 f2dfbfe3 cb813080 8b001860 (f9400401) [ 0.762168] ---[ end trace 0000000000000000 ]--- [ 0.762550] note: init[1] exited with irqs disabled [ 0.762631] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
In the Linux kernel, the following vulnerability has been resolved: btrfs: clear free space tree creation state on rebuild failure btrfs_rebuild_free_space_tree() sets BTRFS_FS_CREATING_FREE_SPACE_TREE before rebuilding the free space tree. Several error paths return without clearing this flag. The transaction restart failure path can leave the flag set on a live filesystem, causing delayed reference processing to be skipped. Clear it on all free space tree rebuild failure paths. Keep BTRFS_FS_FREE_SPACE_TREE_UNTRUSTED set, since a failed rebuild leaves the free space tree untrusted. Callers must fall back to extent-tree caching.
In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: prevent buffer overflow in page_pool allocation The per‑processor buffering scheme is supported only if the number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS (8). This is already checked in mvpp2_probe() during the initial activation of percpu_pools. However, mvpp2_change_mtu() may later call mvpp2_bm_switch_buffers(priv, true) without this check, which can lead to an out-of-bounds access in the priv->page_pool array in mvpp2_bm_init(). The array is sized to hold MVPP2_PORT_MAX_RXQ entries, and mvpp2_get_nrxqs() may return exactly that value. The per-CPU scheme then doubles it to nrxqs * 2, exceeding the array bounds. Check that the hardware version is MVPP22 or newer and that the number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS before switching to per-CPU mode. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow in EOP ring size calculation. The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as order_base_2(q->eop_ring_buffer_size / 4) - 1 But order_base_2 can in theory return 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to order_base_2(q->eop_ring_buffer_size / 8) using properties of logarithms. Also add to the above comment to make the mathematics more clear. (cherry picked from commit f0f43fcf8b2b3a924cad9444340921c96ed5f634)
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cyw: pass PMKID to firmware if present Zero out auth_status on initialization. Otherwise, garbage will leak from the stack to the firmware (when ssid is less than 32 bytes and/or when params->pmkid is set). Then, pass the params->pmkid to the firmware (without it, the firmware caches a garbage PMKID on successful authentication and denies a subsequent association request that includes the PMKID).
In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: ring the doorbell if a burst ends in a drop fbnic_tx_map() skips the doorbell write, and the completion request, for every packet handed to it with xmit_more set, counting on the packet which ends the burst to publish them all. When that packet is dropped instead - skb_put_padto(), skb_cow_head() or a DMA mapping failure - nothing rings. The descriptors of the preceding packets stay invisible to the HW until the next transmit on that queue, which for a burst-then-idle workload may never come. Remember the meta descriptor of the last packet left without a doorbell and flush it from the error paths. The completion request has to be set on that descriptor rather than simply writing the tail, otherwise the HW would transmit the packets but never report a head, and the ring would fill up and stall for good. This is very similar to Joe's recent series of fixes for bnxt. Not seen in real life, reproduced under QEMU with failure injection.
In the Linux kernel, the following vulnerability has been resolved: IB/IPoIB: Avoid restoring OPER_UP after multicast flush ipoib_ib_dev_flush_light() temporarily clears IPOIB_FLAG_OPER_UP to prevent multicast joins while ipoib_mcast_dev_flush() is running, and restores the flag afterwards if it was previously set. This restore races with ipoib_ib_dev_down(). If the interface is brought down while the flush is in progress, ipoib_ib_dev_down() clears IPOIB_FLAG_OPER_UP, but the flush path may set it again after the device has already gone down. Since commit 894021a75291 ("IB/ipoib: Make the carrier_on_task race aware"), ipoib_mcast_carrier_on_task() relies on IPOIB_FLAG_OPER_UP being cleared to terminate its rtnl_trylock() retry loop. If the flag is left set after shutdown, the workqueue retries forever, causing teardown to deadlock when ipoib_ndo_uninit() waits in destroy_workqueue() while holding RTNL. Instead of overloading IPOIB_FLAG_OPER_UP to block multicast joins during a light flush, introduce a dedicated IPOIB_FLAG_MCAST_FLUSH flag. Use it together with IPOIB_FLAG_OPER_UP to determine whether multicast joins are allowed, avoiding the race with device shutdown.
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: check IP header size in cfg80211_classify8021d() A frame that looks like IP can be transmitted, but be too short, so the DS field is read incorrectly: BUG: KMSAN: uninit-value in cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027 cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027 ieee80211_select_queue+0x37a/0x9e0 net/mac80211/wme.c:180 __ieee80211_subif_start_xmit+0x60f/0x1d90 net/mac80211/tx.c:4304 ieee80211_subif_start_xmit+0xa8/0x6d0 net/mac80211/tx.c:4538 ... packet_sendmsg+0x9173/0xa2a0 net/packet/af_packet.c:3108 Use skb_header_pointer() like the MPLS case.