Debian
Monthly
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL access in assign channel context handler Currently, when ath12k_mac_assign_vif_to_vdev() fails, the radio handle (ar) gets accessed from the link VIF handle (arvif) for debug logging, This is incorrect. In the fail scenario, radio handle is NULL. Fix the NULL access, avoid radio handle access by moving to the hardware debug logging helper function (ath12k_hw_warn). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
CVE-2025-38293 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38286 is an out-of-bounds array access vulnerability in the Linux kernel's AT91 GPIO pinctrl driver caused by insufficient validation of device tree alias values during probe. A local attacker with low privileges can trigger an out-of-bounds read or write to the gpio_chips array, potentially leading to information disclosure or denial of service. The vulnerability affects Linux kernel versions with the vulnerable at91_gpio_probe() function and is not currently listed in CISA KEV, indicating limited evidence of active exploitation.
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARN() in get_bpf_raw_tp_regs syzkaller reported an issue: WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861 Modules linked in: CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861 RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005 RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003 R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004 R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900 FS: 0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline] bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931 bpf_prog_ec3b2eefa702d8d3+0x43/0x47 bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline] __bpf_prog_run include/linux/filter.h:718 [inline] bpf_prog_run include/linux/filter.h:725 [inline] __bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline] bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405 __bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47 __traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47 __do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline] trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline] __mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35 __mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline] mmap_read_trylock include/linux/mmap_lock.h:204 [inline] stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157 __bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483 ____bpf_get_stack kernel/bpf/stackmap.c:499 [inline] bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496 ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline] bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931 bpf_prog_ec3b2eefa702d8d3+0x43/0x47 Tracepoint like trace_mmap_lock_acquire_returned may cause nested call as the corner case show above, which will be resolved with more general method in the future. As a result, WARN_ON_ONCE will be triggered. As Alexei suggested, remove the WARN_ON_ONCE first.
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: configure manual DAC mode via PCI config API only To support 36-bit DMA, configure chip proprietary bit via PCI config API or chip DBI interface. However, the PCI device mmap isn't set yet and the DBI is also inaccessible via mmap, so only if the bit can be accessible via PCI config API, chip can support 36-bit DMA. Otherwise, fallback to 32-bit DMA. With NULL mmap address, kernel throws trace: BUG: unable to handle page fault for address: 0000000000001090 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 71 Comm: irq/26-pciehp Tainted: G OE 6.14.2-061402-generic #202504101348 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE RIP: 0010:rtw89_pci_ops_write16+0x12/0x30 [rtw89_pci] RSP: 0018:ffffb0ffc0acf9d8 EFLAGS: 00010206 RAX: ffffffffc158f9c0 RBX: ffff94865e702020 RCX: 0000000000000000 RDX: 0000000000000718 RSI: 0000000000001090 RDI: ffff94865e702020 RBP: ffffb0ffc0acf9d8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000015 R13: 0000000000000719 R14: ffffb0ffc0acfa1f R15: ffffffffc1813060 FS: 0000000000000000(0000) GS:ffff9486f3480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001090 CR3: 0000000090440001 CR4: 00000000000626f0 Call Trace: <TASK> rtw89_pci_read_config_byte+0x6d/0x120 [rtw89_pci] rtw89_pci_cfg_dac+0x5b/0xb0 [rtw89_pci] rtw89_pci_probe+0xa96/0xbd0 [rtw89_pci] ? __pfx___device_attach_driver+0x10/0x10 ? __pfx___device_attach_driver+0x10/0x10 local_pci_probe+0x47/0xa0 pci_call_probe+0x5d/0x190 pci_device_probe+0xa7/0x160 really_probe+0xf9/0x370 ? pm_runtime_barrier+0x55/0xa0 __driver_probe_device+0x8c/0x140 driver_probe_device+0x24/0xd0 __device_attach_driver+0xcd/0x170 bus_for_each_drv+0x99/0x100 __device_attach+0xb4/0x1d0 device_attach+0x10/0x20 pci_bus_add_device+0x59/0x90 pci_bus_add_devices+0x31/0x80 pciehp_configure_device+0xaa/0x170 pciehp_enable_slot+0xd6/0x240 pciehp_handle_presence_or_link_change+0xf1/0x180 pciehp_ist+0x162/0x1c0 irq_thread_fn+0x24/0x70 irq_thread+0xef/0x1c0 ? __pfx_irq_thread_fn+0x10/0x10 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xfc/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x47/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>
CVE-2025-38282 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Add NULL check in mt7996_thermal_init devm_kasprintf() can return a NULL pointer on failure,but this returned value in mt7996_thermal_init() is not checked. Add NULL check in mt7996_thermal_init(), to handle kernel NULL pointer dereference error.
CVE-2025-38280 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: mtd: nand: ecc-mxic: Fix use of uninitialized variable ret If ctx->steps is zero, the loop processing ECC steps is skipped, and the variable ret remains uninitialized. It is later checked and returned, which leads to undefined behavior and may cause unpredictable results in user space or kernel crashes. This scenario can be triggered in edge cases such as misconfigured geometry, ECC engine misuse, or if ctx->steps is not validated after initialization. Initialize ret to zero before the loop to ensure correct and safe behavior regardless of the ctx->steps value. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug The qmp_usb_iomap() helper function currently returns the raw result of devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return a NULL pointer and the caller only checks error pointers with IS_ERR(), NULL could bypass the check and lead to an invalid dereference. Fix the issue by checking if devm_ioremap() returns NULL. When it does, qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM), ensuring safe and consistent error handling.
In the Linux kernel, the following vulnerability has been resolved: fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt() fpga_mgr_test_img_load_sgt() allocates memory for sgt using kunit_kzalloc() however it does not check if the allocation failed. It then passes sgt to sg_alloc_table(), which passes it to __sg_alloc_table(). This function calls memset() on sgt in an attempt to zero it out. If the allocation fails then sgt will be NULL and the memset will trigger a NULL pointer dereference. Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL().
In the Linux kernel, the following vulnerability has been resolved: net: tipc: fix refcount warning in tipc_aead_encrypt syzbot reported a refcount warning [1] caused by calling get_net() on a network namespace that is being destroyed (refcount=0). This happens when a TIPC discovery timer fires during network namespace cleanup. The recently added get_net() call in commit e279024617134 ("net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done") attempts to hold a reference to the network namespace. However, if the namespace is already being destroyed, its refcount might be zero, leading to the use-after-free warning. Replace get_net() with maybe_get_net(), which safely checks if the refcount is non-zero before incrementing it. If the namespace is being destroyed, return -ENODEV early, after releasing the bearer reference. [1]: https://lore.kernel.org/all/68342b55.a70a0220.253bc2.0091.GAE@google.com/T/#m12019cf9ae77e1954f666914640efa36d52704a2
CVE-2025-38272 is a security vulnerability (CVSS 5.5) that allows eee. Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: net: prevent a NULL deref in rtnl_create_link() At the time rtnl_create_link() is running, dev->netdev_ops is NULL, we must not use netdev_lock_ops() or risk a NULL deref if CONFIG_NET_SHAPER is defined. Use netif_set_group() instead of dev_set_group(). RIP: 0010:netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] RIP: 0010:netdev_lock_ops include/net/netdev_lock.h:41 [inline] RIP: 0010:dev_set_group+0xc0/0x230 net/core/dev_api.c:82 Call Trace: <TASK> rtnl_create_link+0x748/0xd10 net/core/rtnetlink.c:3674 rtnl_newlink_create+0x25c/0xb00 net/core/rtnetlink.c:3813 __rtnl_newlink net/core/rtnetlink.c:3940 [inline] rtnl_newlink+0x16d6/0x1c70 net/core/rtnetlink.c:4055 rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6944 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2534 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x75b/0x8d0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline]
In the Linux kernel, the following vulnerability has been resolved: btrfs: exit after state insertion failure at btrfs_convert_extent_bit() If insert_state() state failed it returns an error pointer and we call extent_io_tree_panic() which will trigger a BUG() call. However if CONFIG_BUG is disabled, which is an uncommon and exotic scenario, then we fallthrough and call cache_state() which will dereference the error pointer, resulting in an invalid memory access. So jump to the 'out' label after calling extent_io_tree_panic(), it also makes the code more clear besides dealing with the exotic scenario where CONFIG_BUG is disabled.
In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: move tcpm_queue_vdm_unlocked to asynchronous work A state check was previously added to tcpm_queue_vdm_unlocked to prevent a deadlock where the DisplayPort Alt Mode driver would be executing work and attempting to grab the tcpm_lock while the TCPM was holding the lock and attempting to unregister the altmode, blocking on the altmode driver's cancel_work_sync call. Because the state check isn't protected, there is a small window where the Alt Mode driver could determine that the TCPM is in a ready state and attempt to grab the lock while the TCPM grabs the lock and changes the TCPM state to one that causes the deadlock. The callstack is provided below: [110121.667392][ C7] Call trace: [110121.667396][ C7] __switch_to+0x174/0x338 [110121.667406][ C7] __schedule+0x608/0x9f0 [110121.667414][ C7] schedule+0x7c/0xe8 [110121.667423][ C7] kernfs_drain+0xb0/0x114 [110121.667431][ C7] __kernfs_remove+0x16c/0x20c [110121.667436][ C7] kernfs_remove_by_name_ns+0x74/0xe8 [110121.667442][ C7] sysfs_remove_group+0x84/0xe8 [110121.667450][ C7] sysfs_remove_groups+0x34/0x58 [110121.667458][ C7] device_remove_groups+0x10/0x20 [110121.667464][ C7] device_release_driver_internal+0x164/0x2e4 [110121.667475][ C7] device_release_driver+0x18/0x28 [110121.667484][ C7] bus_remove_device+0xec/0x118 [110121.667491][ C7] device_del+0x1e8/0x4ac [110121.667498][ C7] device_unregister+0x18/0x38 [110121.667504][ C7] typec_unregister_altmode+0x30/0x44 [110121.667515][ C7] tcpm_reset_port+0xac/0x370 [110121.667523][ C7] tcpm_snk_detach+0x84/0xb8 [110121.667529][ C7] run_state_machine+0x4c0/0x1b68 [110121.667536][ C7] tcpm_state_machine_work+0x94/0xe4 [110121.667544][ C7] kthread_worker_fn+0x10c/0x244 [110121.667552][ C7] kthread+0x104/0x1d4 [110121.667557][ C7] ret_from_fork+0x10/0x20 [110121.667689][ C7] Workqueue: events dp_altmode_work [110121.667697][ C7] Call trace: [110121.667701][ C7] __switch_to+0x174/0x338 [110121.667710][ C7] __schedule+0x608/0x9f0 [110121.667717][ C7] schedule+0x7c/0xe8 [110121.667725][ C7] schedule_preempt_disabled+0x24/0x40 [110121.667733][ C7] __mutex_lock+0x408/0xdac [110121.667741][ C7] __mutex_lock_slowpath+0x14/0x24 [110121.667748][ C7] mutex_lock+0x40/0xec [110121.667757][ C7] tcpm_altmode_enter+0x78/0xb4 [110121.667764][ C7] typec_altmode_enter+0xdc/0x10c [110121.667769][ C7] dp_altmode_work+0x68/0x164 [110121.667775][ C7] process_one_work+0x1e4/0x43c [110121.667783][ C7] worker_thread+0x25c/0x430 [110121.667789][ C7] kthread+0x104/0x1d4 [110121.667794][ C7] ret_from_fork+0x10/0x20 Change tcpm_queue_vdm_unlocked to queue for tcpm_queue_vdm_work, which can perform the state check while holding the TCPM lock while the Alt Mode lock is no longer held. This requires a new struct to hold the vdm data, altmode_vdm_event.
In the Linux kernel, the following vulnerability has been resolved: serial: jsm: fix NPE during jsm_uart_port_init No device was set which caused serial_base_ctrl_add to crash. BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1 Debian 6.12.25-1 RIP: 0010:serial_base_ctrl_add+0x96/0x120 Call Trace: <TASK> serial_core_register_port+0x1a0/0x580 ? __setup_irq+0x39c/0x660 ? __kmalloc_cache_noprof+0x111/0x310 jsm_uart_port_init+0xe8/0x180 [jsm] jsm_probe_one+0x1f4/0x410 [jsm] local_pci_probe+0x42/0x90 pci_device_probe+0x22f/0x270 really_probe+0xdb/0x340 ? pm_runtime_barrier+0x54/0x90 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8c/0xe0 bus_add_driver+0x112/0x1f0 driver_register+0x72/0xd0 jsm_init_module+0x36/0xff0 [jsm] ? __pfx_jsm_init_module+0x10/0x10 [jsm] do_one_initcall+0x58/0x310 do_init_module+0x60/0x230 Tested with Digi Neo PCIe 8 port card.
In the Linux kernel, the following vulnerability has been resolved: bcache: fix NULL pointer in cache_set_flush() 1. LINE#1794 - LINE#1887 is some codes about function of bch_cache_set_alloc(). 2. LINE#2078 - LINE#2142 is some codes about function of register_cache_set(). 3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098. 1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb) 1795 { ... 1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) || 1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) || 1862 mempool_init_kmalloc_pool(&c->bio_meta, 2, 1863 sizeof(struct bbio) + sizeof(struct bio_vec) * 1864 bucket_pages(c)) || 1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) || 1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio), 1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) || 1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) || 1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc", 1870 WQ_MEM_RECLAIM, 0)) || 1871 bch_journal_alloc(c) || 1872 bch_btree_cache_alloc(c) || 1873 bch_open_buckets_alloc(c) || 1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages))) 1875 goto err; ^^^^^^^^ 1876 ... 1883 return c; 1884 err: 1885 bch_cache_set_unregister(c); ^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1886 return NULL; 1887 } ... 2078 static const char *register_cache_set(struct cache *ca) 2079 { ... 2098 c = bch_cache_set_alloc(&ca->sb); 2099 if (!c) 2100 return err; ^^^^^^^^^^ ... 2128 ca->set = c; 2129 ca->set->cache[ca->sb.nr_this_dev] = ca; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ... 2138 return NULL; 2139 err: 2140 bch_cache_set_unregister(c); 2141 return err; 2142 } (1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and call bch_cache_set_unregister()(LINE#1885). (2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return. (3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the value to c->cache[], it means that c->cache[] is NULL. LINE#1624 - LINE#1665 is some codes about function of cache_set_flush(). As (1), in LINE#1885 call bch_cache_set_unregister() ---> bch_cache_set_stop() ---> closure_queue() -.-> cache_set_flush() (as below LINE#1624) 1624 static void cache_set_flush(struct closure *cl) 1625 { ... 1654 for_each_cache(ca, c, i) 1655 if (ca->alloc_thread) ^^ 1656 kthread_stop(ca->alloc_thread); ... 1665 } (4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the kernel crash occurred as below: [ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory [ 846.713242] bcache: register_bcache() error : failed to register device [ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered [ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8 [ 846.714790] PGD 0 P4D 0 [ 846.715129] Oops: 0000 [#1] SMP PTI [ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1 [ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018 [ 846.716451] Workqueue: events cache_set_flush [bcache] [ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache] [ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 0 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: tty: serial: uartlite: register uart driver in init When two instances of uart devices are probing, a concurrency race can occur. If one thread calls uart_register_driver function, which first allocates and assigns memory to 'uart_state' member of uart_driver structure, the other instance can bypass uart driver registration and call ulite_assign. This calls uart_add_one_port, which expects the uart driver to be fully initialized. This leads to a kernel panic due to a null pointer dereference: [ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8 [ 8.156982] #PF: supervisor write access in kernel mode [ 8.156984] #PF: error_code(0x0002) - not-present page [ 8.156986] PGD 0 P4D 0 ... [ 8.180668] RIP: 0010:mutex_lock+0x19/0x30 [ 8.188624] Call Trace: [ 8.188629] ? __die_body.cold+0x1a/0x1f [ 8.195260] ? page_fault_oops+0x15c/0x290 [ 8.209183] ? __irq_resolve_mapping+0x47/0x80 [ 8.209187] ? exc_page_fault+0x64/0x140 [ 8.209190] ? asm_exc_page_fault+0x22/0x30 [ 8.209196] ? mutex_lock+0x19/0x30 [ 8.223116] uart_add_one_port+0x60/0x440 [ 8.223122] ? proc_tty_register_driver+0x43/0x50 [ 8.223126] ? tty_register_driver+0x1ca/0x1e0 [ 8.246250] ulite_probe+0x357/0x4b0 [uartlite] To prevent it, move uart driver registration in to init function. This will ensure that uart_driver is always registered when probe function is called.
In the Linux kernel, the following vulnerability has been resolved: btrfs: handle csum tree error with rescue=ibadroots correctly [BUG] There is syzbot based reproducer that can crash the kernel, with the following call trace: (With some debug output added) DEBUG: rescue=ibadroots parsed BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010) BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8 BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm BTRFS info (device loop0): using free-space-tree BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0 DEBUG: read tree root path failed for tree csum, ret=-5 BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0 BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0 process 'repro' launched './file2' with NULL argv: empty string added DEBUG: no csum root, idatacsums=0 ibadroots=134217728 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs] Call Trace: <TASK> btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs] btrfs_submit_bbio+0x43e/0x1a80 [btrfs] submit_one_bio+0xde/0x160 [btrfs] btrfs_readahead+0x498/0x6a0 [btrfs] read_pages+0x1c3/0xb20 page_cache_ra_order+0x4b5/0xc20 filemap_get_pages+0x2d3/0x19e0 filemap_read+0x314/0xde0 __kernel_read+0x35b/0x900 bprm_execve+0x62e/0x1140 do_execveat_common.isra.0+0x3fc/0x520 __x64_sys_execveat+0xdc/0x130 do_syscall_64+0x54/0x1d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ---[ end trace 0000000000000000 ]--- [CAUSE] Firstly the fs has a corrupted csum tree root, thus to mount the fs we have to go "ro,rescue=ibadroots" mount option. Normally with that mount option, a bad csum tree root should set BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will ignore csum search. But in this particular case, we have the following call trace that caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS: load_global_roots_objectid(): ret = btrfs_search_slot(); /* Succeeded */ btrfs_item_key_to_cpu() found = true; /* We found the root item for csum tree. */ root = read_tree_root_path(); if (IS_ERR(root)) { if (!btrfs_test_opt(fs_info, IGNOREBADROOTS)) /* * Since we have rescue=ibadroots mount option, * @ret is still 0. */ break; if (!found || ret) { /* @found is true, @ret is 0, error handling for csum * tree is skipped. */ } This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if the csum tree is corrupted, which results unexpected later csum lookup. [FIX] If read_tree_root_path() failed, always populate @ret to the error number. As at the end of the function, we need @ret to determine if we need to do the extra error handling for csum tree.
In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9335: Fix missing free of regulator supplies Driver gets and enables all regulator supplies in probe path (wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup in final error paths and in unbind (missing remove() callback). This leads to leaked memory and unbalanced regulator enable count during probe errors or unbind. Fix this by converting entire code into devm_regulator_bulk_get_enable() which also greatly simplifies the code.
In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write memcg_path_store() assigns a newly allocated memory buffer to filter->memcg_path, without deallocating the previously allocated and assigned memory buffer. As a result, users can leak kernel memory by continuously writing a data to memcg_path DAMOS sysfs file. Fix the leak by deallocating the previously set memory buffer.
CVE-2025-38257 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
CVE-2025-38256 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: lib/group_cpus: fix NULL pointer dereference from group_cpus_evenly() While testing null_blk with configfs, echo 0 > poll_queues will trigger following panic: BUG: kernel NULL pointer dereference, address: 0000000000000010 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 27 UID: 0 PID: 920 Comm: bash Not tainted 6.15.0-02023-gadbdb95c8696-dirty #1238 PREEMPT(undef) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__bitmap_or+0x48/0x70 Call Trace: <TASK> __group_cpus_evenly+0x822/0x8c0 group_cpus_evenly+0x2d9/0x490 blk_mq_map_queues+0x1e/0x110 null_map_queues+0xc9/0x170 [null_blk] blk_mq_update_queue_map+0xdb/0x160 blk_mq_update_nr_hw_queues+0x22b/0x560 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_poll_queues_store+0xa4/0x130 [null_blk] configfs_write_iter+0x109/0x1d0 vfs_write+0x26e/0x6f0 ksys_write+0x79/0x180 __x64_sys_write+0x1d/0x30 x64_sys_call+0x45c4/0x45f0 do_syscall_64+0xa5/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e Root cause is that numgrps is set to 0, and ZERO_SIZE_PTR is returned from kcalloc(), and later ZERO_SIZE_PTR will be deferenced. Fix the problem by checking numgrps first in group_cpus_evenly(), and return NULL directly if numgrps is zero. [yukuai3@huawei.com: also fix the non-SMP version]
CVE-2025-38254 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: atm: clip: prevent NULL deref in clip_push() Blamed commit missed that vcc_destroy_socket() calls clip_push() with a NULL skb. If clip_devs is NULL, clip_push() then crashes when reading skb->truesize.
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3() In snd_usb_get_audioformat_uac3(), the length value returned from snd_usb_ctl_msg() is used directly for memory allocation without validation. This length is controlled by the USB device. The allocated buffer is cast to a uac3_cluster_header_descriptor and its fields are accessed without verifying that the buffer is large enough. If the device returns a smaller than expected length, this leads to an out-of-bounds read. Add a length check to ensure the buffer is large enough for uac3_cluster_header_descriptor.
CVE-2025-38247 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38245 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid inode pointer dereferences during log replay In a few places where we call read_one_inode(), if we get a NULL pointer we end up jumping into an error path, or fallthrough in case of __add_inode_ref(), where we then do something like this: iput(&inode->vfs_inode); which results in an invalid inode pointer that triggers an invalid memory access, resulting in a crash. Fix this by making sure we don't do such dereferences.
In the Linux kernel, the following vulnerability has been resolved: mm/shmem, swap: fix softlockup with mTHP swapin Following softlockup can be easily reproduced on my test machine with: echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device mkdir -p /sys/fs/cgroup/memory/test echo 1G > /sys/fs/cgroup/test/memory.max echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs while true; do dd if=/dev/zero of=/tmp/test.img bs=1M count=5120 cat /tmp/test.img > /dev/null rm /tmp/test.img done Then after a while: watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787] Modules linked in: zram virtiofs CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G L 6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)· Tainted: [L]=SOFTLOCKUP Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015 RIP: 0010:mpol_shared_policy_lookup+0xd/0x70 Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8 RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202 RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001 RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518 RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001 R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000 FS: 00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> shmem_alloc_folio+0x31/0xc0 shmem_swapin_folio+0x309/0xcf0 ? filemap_get_entry+0x117/0x1e0 ? xas_load+0xd/0xb0 ? filemap_get_entry+0x101/0x1e0 shmem_get_folio_gfp+0x2ed/0x5b0 shmem_file_read_iter+0x7f/0x2e0 vfs_read+0x252/0x330 ksys_read+0x68/0xf0 do_syscall_64+0x4c/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f03f9a46991 Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991 RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003 RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000 </TASK> The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in conflict with it, so swapcache_prepare fails and causes shmem_swap_alloc_folio to return -EEXIST, and shmem simply retries again and again causing this loop. Fix it by applying a similar fix for anon mTHP swapin. The performance change is very slight, time of swapin 10g zero folios with shmem (test for 12 times): Before: 2.47s After: 2.48s [kasong@tencent.com: add comment]
In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix invalid node index On a system with DRAM interleave enabled, out-of-bound access is detected: megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x46/0x4b megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas] megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas] local_pci_probe+0x42/0x90 pci_device_probe+0xdc/0x290 really_probe+0xdb/0x340 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8b/0xe0 bus_add_driver+0x142/0x220 driver_register+0x72/0xd0 megasas_init+0xdf/0xff0 [megaraid_sas] do_one_initcall+0x57/0x310 do_init_module+0x90/0x250 init_module_from_file+0x85/0xc0 idempotent_init_module+0x114/0x310 __x64_sys_finit_module+0x65/0xc0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it accordingly.
Helm is a package manager for Charts for Kubernetes. Prior to 3.18.4, a specially crafted Chart.yaml file along with a specially linked Chart.lock file can lead to local code execution when dependencies are updated. Fields in a Chart.yaml file, that are carried over to a Chart.lock file when dependencies are updated and this file is written, can be crafted in a way that can cause execution if that same content were in a file that is executed (e.g., a bash.rc file or shell script). If the Chart.lock file is symlinked to one of these files updating dependencies will write the lock file content to the symlinked file. This can lead to unwanted execution. Helm warns of the symlinked file but did not stop execution due to symlinking. This issue has been resolved in Helm v3.18.4.
Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. The wincred credential helper uses a static buffer (target) as a unique key for storing and comparing against internal storage. This credential helper does not properly bounds check the available space remaining in the buffer before appending to it with wcsncat(), leading to potential buffer overflows. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1.
Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When cloning a repository Git knows to optionally fetch a bundle advertised by the remote server, which allows the server-side to offload parts of the clone to a CDN. The Git client does not perform sufficient validation of the advertised bundles, which allows the remote side to perform protocol injection. This protocol injection can cause the client to write the fetched bundle to a location controlled by the adversary. The fetched content is fully controlled by the server, which can in the worst case lead to arbitrary code execution. The use of bundle URIs is not enabled by default and can be controlled by the bundle.heuristic config option. Some cases of the vulnerability require that the adversary is in control of where a repository will be cloned to. This either requires social engineering or a recursive clone with submodules. These cases can thus be avoided by disabling recursive clones. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1.
In Juju versions prior to 3.6.8 and 2.9.52, any authenticated controller user was allowed to upload arbitrary agent binaries to any model or to the controller itself, without verifying model membership or requiring explicit permissions. This enabled the distribution of poisoned binaries to new or upgraded machines, potentially resulting in remote code execution.
The /charms endpoint on a Juju controller lacked sufficient authorization checks, allowing any user with an account on the controller to upload a charm. Uploading a malicious charm that exploits a Zip Slip vulnerability could allow an attacker to gain access to a machine running a unit through the affected charm.
The /log endpoint on a Juju controller lacked sufficient authorization checks, allowing unauthorized users to access debug messages that could contain sensitive information.
A transient execution vulnerability in some AMD processors may allow an attacker to infer data in the L1D cache, potentially resulting in the leakage of sensitive information across privileged boundaries.
A security vulnerability in some AMD processors may allow an attacker to infer data from previous stores (CVSS 5.6) that allows an attacker. Remediation should follow standard vulnerability management procedures. Vendor patch is available.
A transient execution vulnerability in some AMD processors may allow a user process to infer TSC_AUX even when such a read is disabled, potentially resulting in information leakage.
A transient execution vulnerability in some AMD processors may allow a user process to infer the control registers speculatively even if UMIP feature is enabled, potentially resulting in information leakage.
CVE-2025-38237 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: af_unix: Don't leave consecutive consumed OOB skbs. Jann Horn reported a use-after-free in unix_stream_read_generic(). The following sequences reproduce the issue: $ python3 from socket import * s1, s2 = socketpair(AF_UNIX, SOCK_STREAM) s1.send(b'x', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'y', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'z', MSG_OOB) s2.recv(1) # recv 'z' illegally s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free) Even though a user reads OOB data, the skb holding the data stays on the recv queue to mark the OOB boundary and break the next recv(). After the last send() in the scenario above, the sk2's recv queue has 2 leading consumed OOB skbs and 1 real OOB skb. Then, the following happens during the next recv() without MSG_OOB 1. unix_stream_read_generic() peeks the first consumed OOB skb 2. manage_oob() returns the next consumed OOB skb 3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb 4. unix_stream_read_generic() reads and frees the OOB skb , and the last recv(MSG_OOB) triggers KASAN splat. The 3. above occurs because of the SO_PEEK_OFF code, which does not expect unix_skb_len(skb) to be 0, but this is true for such consumed OOB skbs. while (skip >= unix_skb_len(skb)) { skip -= unix_skb_len(skb); skb = skb_peek_next(skb, &sk->sk_receive_queue); ... } In addition to this use-after-free, there is another issue that ioctl(SIOCATMARK) does not function properly with consecutive consumed OOB skbs. So, nothing good comes out of such a situation. Instead of complicating manage_oob(), ioctl() handling, and the next ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs, let's not leave such consecutive OOB unnecessarily. Now, while receiving an OOB skb in unix_stream_recv_urg(), if its previous skb is a consumed OOB skb, it is freed. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027) Read of size 4 at addr ffff888106ef2904 by task python3/315 CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:636) unix_stream_read_actor (net/unix/af_unix.c:3027) unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f8911fcea06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06 RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006 RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20 R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:348) kmem_cache_alloc_ ---truncated---
CVE-2025-7346 is a security vulnerability (CVSS 8.7). High severity vulnerability requiring prompt remediation.
LuaJIT through 2.1 and OpenRusty luajit2 before v2.1-20240314 have an out-of-bounds read in the stack-overflow handler in lj_state.c.
LuaJIT through 2.1 and OpenRusty luajit2 before v2.1-20240314 have an unsinking of IR_FSTORE for NULL metatable, which leads to Denial of Service (DoS).
LuaJIT through 2.1 and OpenRusty luajit2 before v2.1-20240626 have a stack-buffer-overflow in lj_strfmt_wfnum in lj_strfmt_num.c.
An authorized user can issue queries with duplicate _id fields, that leads to unexpected behavior in MongoDB Server, which may result to crash. This issue can only be triggered by authorized users and cause Denial of Service. This issue affects MongoDB Server v8.1 version 8.1.0.
Redis is an open source, in-memory database that persists on disk. An unauthenticated connection can cause repeated IP protocol errors, leading to client starvation and, ultimately, a denial of service. This vulnerability is fixed in 8.0.3, 7.4.5, 7.2.10, and 6.2.19.
Redis is an open source, in-memory database that persists on disk. From 2.8 to before 8.0.3, 7.4.5, 7.2.10, and 6.2.19, an authenticated user may use a specially crafted string to trigger a stack/heap out of bounds write on hyperloglog operations, potentially leading to remote code execution. The bug likely affects all Redis versions with hyperloglog operations implemented. This vulnerability is fixed in 8.0.3, 7.4.5, 7.2.10, and 6.2.19. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from executing hyperloglog operations. This can be done using ACL to restrict HLL commands.
MongoDB Server's mongos component can become unresponsive to new connections due to incorrect handling of incomplete data. This affects MongoDB when configured with load balancer support. This issue affects MongoDB Server v6.0 prior to 6.0.23, MongoDB Server v7.0 prior to 7.0.20 and MongoDB Server v8.0 prior to 8.0.9 Required Configuration: This affects MongoDB sharded clusters when configured with load balancer support for mongos using HAProxy on specified ports.
An unauthorized user may leverage a specially crafted aggregation pipeline to access data without proper authorization due to improper handling of the $mergeCursors stage in MongoDB Server. This may lead to access to data without further authorisation. This issue affects MongoDB Server MongoDB Server v8.0 versions prior to 8.0.7, MongoDB Server v7.0 versions prior to 7.0.19 and MongoDB Server v6.0 versions prior to 6.0.22
MongoDB Server may be susceptible to disruption caused by high memory usage, potentially leading to server crash. This condition is linked to inefficiencies in memory management related to internal operations. In scenarios where certain internal processes persist longer than anticipated, memory consumption can increase, potentially impacting server stability and availability. This issue affects MongoDB Server v8.0 versions prior to 8.0.10
An issue has been identified in MongoDB Server where unredacted queries may inadvertently appear in server logs when certain error conditions are encountered. This issue affects MongoDB Server v8.0 versions prior to 8.0.5, MongoDB Server v7.0 versions prior to 7.0.18 and MongoDB Server v6.0 versions prior to 6.0.21.
CVE-2025-38235 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
The protobuf crate before 3.7.2 for Rust allows uncontrolled recursion in the protobuf::coded_input_stream::CodedInputStream::skip_group parsing of unknown fields in untrusted input.
In Alinto SOPE SOGo 2.0.2 through 5.12.2, sope-core/NGExtensions/NGHashMap.m allows a NULL pointer dereference and SOGo crash via a request in which a parameter in the query string is a duplicate of a parameter in the POST body.
A security vulnerability in Mbed TLS before 3.6.4 (CVSS 4.8). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
Mbed TLS before 3.6.4 has a race condition in AESNI detection if certain compiler optimizations occur. An attacker may be able to extract an AES key from a multithreaded program, or perform a GCM forgery.
OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In version 4.5.0, using a specially crafted tee-supplicant binary running in REE userspace, an attacker can trigger a panic in a TA that uses the libutee Secure Storage API. Many functions in libutee, specifically those which make up the Secure Storage API, will panic if a system call returns an unexpected return code. This behavior is mandated by the TEE Internal Core API specification. However, in OP-TEE’s implementation, return codes of secure storage operations are passed through unsanitized from the REE tee-supplicant, through the Linux kernel tee-driver, through the OP-TEE kernel, back to libutee. Thus, an attacker with access to REE userspace, and the ability to stop tee-supplicant and replace it with their own process (generally trivial for a root user, and depending on the way permissions are set up, potentially available even to less privileged users) can run a malicious tee-supplicant process that responds to storage requests with unexpected response codes, triggering a panic in the requesting TA. This is particularly dangerous for TAs built with `TA_FLAG_SINGLE_INSTANCE` (corresponding to `gpd.ta.singleInstance` and `TA_FLAG_INSTANCE_KEEP_ALIVE` (corresponding to `gpd.ta.keepAlive`). The behavior of these TAs may depend on memory that is preserved between sessions, and the ability of an attacker to panic the TA and reload it with a clean memory space can compromise the behavior of those TAs. A critical example of this is the optee_ftpm TA. It uses the kept alive memory to hold PCR values, which crucially must be non-resettable. An attacker who can trigger a panic in the fTPM TA can reset the PCRs, and then extend them PCRs with whatever they choose, falsifying boot measurements, accessing sealed data, and potentially more. The impact of this issue depends significantly on the behavior of affected TAs. For some, it could manifest as a denial of service, while for others, like the fTPM TA, it can result in the disclosure of sensitive data. Anyone running the fTPM TA is affected, but similar attacks may be possible on other TAs that leverage the Secure Storage API. A fix is available in commit 941a58d78c99c4754fbd4ec3079ec9e1d596af8f.
In the Linux kernel, the following vulnerability has been resolved: nfsd: Initialize ssc before laundromat_work to prevent NULL dereference In nfs4_state_start_net(), laundromat_work may access nfsd_ssc through nfs4_laundromat -> nfsd4_ssc_expire_umount. If nfsd_ssc isn't initialized, this can cause NULL pointer dereference. Normally the delayed start of laundromat_work allows sufficient time for nfsd_ssc initialization to complete. However, when the kernel waits too long for userspace responses (e.g. in nfs4_state_start_net -> nfsd4_end_grace -> nfsd4_record_grace_done -> nfsd4_cld_grace_done -> cld_pipe_upcall -> __cld_pipe_upcall -> wait_for_completion path), the delayed work may start before nfsd_ssc initialization finishes. Fix this by moving nfsd_ssc initialization before starting laundromat_work.
In the Linux kernel, the following vulnerability has been resolved: jfs: validate AG parameters in dbMount() to prevent crashes Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch corrupted metadata early and avoid undefined behavior in dbAllocAG. Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE: - agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift (L2LPERCTL - 2*agheight) >= 0. - agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight)) ensures agperlev >= 1. - Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5). - LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG; 2^(10 - 2*agheight) prevents division to 0. - agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within stree (size 1365). - Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8). UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9 shift exponent -335544310 is negative CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468 dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400 dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613 jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105 jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: media: cxusb: no longer judge rbuf when the write fails syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the Linux kernel, the following vulnerability has been resolved: media: imagination: fix a potential memory leak in e5010_probe() Add video_device_release() to release the memory allocated by video_device_alloc() if something goes wrong.
In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Terminating the subsequent process of initialization failure syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1] After PSI initialization fails, the si member is accessed again, resulting in this uaf. After si initialization fails, the subsequent process needs to be exited. [1] BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline] BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059 CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xd9/0x110 mm/kasan/report.c:634 vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 __do_sys_exit_group kernel/exit.c:1098 [inline] __se_sys_exit_group kernel/exit.c:1096 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096 x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f871d58d169 Code: Unable to access opcode bytes at 0x7f871d58d13f. RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169 RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003 R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840 </TASK> Allocated by task 6059: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970 vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423 vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_tabl ---truncated---
In the Linux kernel, the following vulnerability has been resolved: media: vivid: Change the siize of the composing syzkaller found a bug: BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline] BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705 Write of size 1440 at addr ffffc9000d0ffda0 by task vivid-000-vid-c/5304 CPU: 0 UID: 0 PID: 5304 Comm: vivid-000-vid-c Not tainted 6.14.0-rc2-syzkaller-00039-g09fbf3d50205 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline] tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705 vivid_fillbuff drivers/media/test-drivers/vivid/vivid-kthread-cap.c:470 [inline] vivid_thread_vid_cap_tick+0xf8e/0x60d0 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:629 vivid_thread_vid_cap+0x8aa/0xf30 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:767 kthread+0x7a9/0x920 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> The composition size cannot be larger than the size of fmt_cap_rect. So execute v4l2_rect_map_inside() even if has_compose_cap == 0.
In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Cleanup after an allocation error When allocation failures are not cleaned up by the driver, further allocation errors will be false-positives, which will cause buffers to remain uninitialized and cause NULL pointer dereferences. Ensure proper cleanup of failed allocations to prevent these issues.
In the Linux kernel, the following vulnerability has been resolved: ceph: avoid kernel BUG for encrypted inode with unaligned file size The generic/397 test hits a BUG_ON for the case of encrypted inode with unaligned file size (for example, 33K or 1K): [ 877.737811] run fstests generic/397 at 2025-01-03 12:34:40 [ 877.875761] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.876130] libceph: client4614 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 877.991965] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.992334] libceph: client4617 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.017234] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.017594] libceph: client4620 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.031394] xfs_io (pid 18988) is setting deprecated v1 encryption policy; recommend upgrading to v2. [ 878.054528] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.054892] libceph: client4623 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.070287] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.070704] libceph: client4626 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.264586] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.265258] libceph: client4629 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.374578] -----------[ cut here ]------------ [ 878.374586] kernel BUG at net/ceph/messenger.c:1070! [ 878.375150] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 878.378145] CPU: 2 UID: 0 PID: 4759 Comm: kworker/2:9 Not tainted 6.13.0-rc5+ #1 [ 878.378969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 878.380167] Workqueue: ceph-msgr ceph_con_workfn [ 878.381639] RIP: 0010:ceph_msg_data_cursor_init+0x42/0x50 [ 878.382152] Code: 89 17 48 8b 46 70 55 48 89 47 08 c7 47 18 00 00 00 00 48 89 e5 e8 de cc ff ff 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 0f 0b <0f> 0b 0f 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 [ 878.383928] RSP: 0018:ffffb4ffc7cbbd28 EFLAGS: 00010287 [ 878.384447] RAX: ffffffff82bb9ac0 RBX: ffff981390c2f1f8 RCX: 0000000000000000 [ 878.385129] RDX: 0000000000009000 RSI: ffff981288232b58 RDI: ffff981390c2f378 [ 878.385839] RBP: ffffb4ffc7cbbe18 R08: 0000000000000000 R09: 0000000000000000 [ 878.386539] R10: 0000000000000000 R11: 0000000000000000 R12: ffff981390c2f030 [ 878.387203] R13: ffff981288232b58 R14: 0000000000000029 R15: 0000000000000001 [ 878.387877] FS: 0000000000000000(0000) GS:ffff9814b7900000(0000) knlGS:0000000000000000 [ 878.388663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 878.389212] CR2: 00005e106a0554e0 CR3: 0000000112bf0001 CR4: 0000000000772ef0 [ 878.389921] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 878.390620] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 878.391307] PKRU: 55555554 [ 878.391567] Call Trace: [ 878.391807] <TASK> [ 878.392021] ? show_regs+0x71/0x90 [ 878.392391] ? die+0x38/0xa0 [ 878.392667] ? do_trap+0xdb/0x100 [ 878.392981] ? do_error_trap+0x75/0xb0 [ 878.393372] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.393842] ? exc_invalid_op+0x53/0x80 [ 878.394232] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.394694] ? asm_exc_invalid_op+0x1b/0x20 [ 878.395099] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.395583] ? ceph_con_v2_try_read+0xd16/0x2220 [ 878.396027] ? _raw_spin_unlock+0xe/0x40 [ 878.396428] ? raw_spin_rq_unlock+0x10/0x40 [ 878.396842] ? finish_task_switch.isra.0+0x97/0x310 [ 878.397338] ? __schedule+0x44b/0x16b0 [ 878.397738] ceph_con_workfn+0x326/0x750 [ 878.398121] process_one_work+0x188/0x3d0 [ 878.398522] ? __pfx_worker_thread+0x10/0x10 [ 878.398929] worker_thread+0x2b5/0x3c0 [ 878.399310] ? __pfx_worker_thread+0x10/0x10 [ 878.399727] kthread+0xe1/0x120 [ 878.400031] ? __pfx_kthread+0x10/0x10 [ 878.400431] ret_from_fork+0x43/0x70 [ 878.400771] ? __pfx_kthread+0x10/0x10 [ 878.401127] ret_from_fork_asm+0x1a/0x30 [ 878.401543] </TASK> [ 878.401760] Modules l ---truncated---
In the Linux kernel, the following vulnerability has been resolved: ext4: inline: fix len overflow in ext4_prepare_inline_data When running the following code on an ext4 filesystem with inline_data feature enabled, it will lead to the bug below. fd = open("file1", O_RDWR | O_CREAT | O_TRUNC, 0666); ftruncate(fd, 30); pwrite(fd, "a", 1, (1UL << 40) + 5UL); That happens because write_begin will succeed as when ext4_generic_write_inline_data calls ext4_prepare_inline_data, pos + len will be truncated, leading to ext4_prepare_inline_data parameter to be 6 instead of 0x10000000006. Then, later when write_end is called, we hit: BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); at ext4_write_inline_data. Fix it by using a loff_t type for the len parameter in ext4_prepare_inline_data instead of an unsigned int. [ 44.545164] ------------[ cut here ]------------ [ 44.545530] kernel BUG at fs/ext4/inline.c:240! [ 44.545834] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 44.546172] CPU: 3 UID: 0 PID: 343 Comm: test Not tainted 6.15.0-rc2-00003-g9080916f4863 #45 PREEMPT(full) 112853fcebfdb93254270a7959841d2c6aa2c8bb [ 44.546523] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 44.546523] RIP: 0010:ext4_write_inline_data+0xfe/0x100 [ 44.546523] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49 [ 44.546523] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216 [ 44.546523] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006 [ 44.546523] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738 [ 44.546523] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [ 44.546523] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000 [ 44.546523] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738 [ 44.546523] FS: 00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000 [ 44.546523] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 44.546523] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0 [ 44.546523] PKRU: 55555554 [ 44.546523] Call Trace: [ 44.546523] <TASK> [ 44.546523] ext4_write_inline_data_end+0x126/0x2d0 [ 44.546523] generic_perform_write+0x17e/0x270 [ 44.546523] ext4_buffered_write_iter+0xc8/0x170 [ 44.546523] vfs_write+0x2be/0x3e0 [ 44.546523] __x64_sys_pwrite64+0x6d/0xc0 [ 44.546523] do_syscall_64+0x6a/0xf0 [ 44.546523] ? __wake_up+0x89/0xb0 [ 44.546523] ? xas_find+0x72/0x1c0 [ 44.546523] ? next_uptodate_folio+0x317/0x330 [ 44.546523] ? set_pte_range+0x1a6/0x270 [ 44.546523] ? filemap_map_pages+0x6ee/0x840 [ 44.546523] ? ext4_setattr+0x2fa/0x750 [ 44.546523] ? do_pte_missing+0x128/0xf70 [ 44.546523] ? security_inode_post_setattr+0x3e/0xd0 [ 44.546523] ? ___pte_offset_map+0x19/0x100 [ 44.546523] ? handle_mm_fault+0x721/0xa10 [ 44.546523] ? do_user_addr_fault+0x197/0x730 [ 44.546523] ? do_syscall_64+0x76/0xf0 [ 44.546523] ? arch_exit_to_user_mode_prepare+0x1e/0x60 [ 44.546523] ? irqentry_exit_to_user_mode+0x79/0x90 [ 44.546523] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 44.546523] RIP: 0033:0x7f42999c6687 [ 44.546523] Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff [ 44.546523] RSP: 002b:00007ffeae4a7930 EFLAGS: 00000202 ORIG_RAX: 0000000000000012 [ 44.546523] RAX: ffffffffffffffda RBX: 00007f4299934740 RCX: 00007f42999c6687 [ 44.546523] RDX: 0000000000000001 RSI: 000055ea6149200f RDI: 0000000000000003 [ 44.546523] RBP: 00007ffeae4a79a0 R08: 0000000000000000 R09: 0000000000000000 [ 44.546523] R10: 0000010000000005 R11: 0000000000000202 R12: 0000 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: ext4: fix out of bounds punch offset Punching a hole with a start offset that exceeds max_end is not permitted and will result in a negative length in the truncate_inode_partial_folio() function while truncating the page cache, potentially leading to undesirable consequences. A simple reproducer: truncate -s 9895604649994 /mnt/foo xfs_io -c "pwrite 8796093022208 4096" /mnt/foo xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo kernel BUG at include/linux/highmem.h:275! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110 RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287 RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000 RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000 RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000 R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005 R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000 FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> truncate_inode_partial_folio+0x3dd/0x620 truncate_inode_pages_range+0x226/0x720 ? bdev_getblk+0x52/0x3e0 ? ext4_get_group_desc+0x78/0x150 ? crc32c_arch+0xfd/0x180 ? __ext4_get_inode_loc+0x18c/0x840 ? ext4_inode_csum+0x117/0x160 ? jbd2_journal_dirty_metadata+0x61/0x390 ? __ext4_handle_dirty_metadata+0xa0/0x2b0 ? kmem_cache_free+0x90/0x5a0 ? jbd2_journal_stop+0x1d5/0x550 ? __ext4_journal_stop+0x49/0x100 truncate_pagecache_range+0x50/0x80 ext4_truncate_page_cache_block_range+0x57/0x3a0 ext4_punch_hole+0x1fe/0x670 ext4_fallocate+0x792/0x17d0 ? __count_memcg_events+0x175/0x2a0 vfs_fallocate+0x121/0x560 ksys_fallocate+0x51/0xc0 __x64_sys_fallocate+0x24/0x40 x64_sys_call+0x18d2/0x4170 do_syscall_64+0xa7/0x220 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by filtering out cases where the punching start offset exceeds max_end.
In the Linux kernel, the following vulnerability has been resolved: ext4: only dirty folios when data journaling regular files fstest generic/388 occasionally reproduces a crash that looks as follows: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ext4_block_zero_page_range+0x30c/0x380 [ext4] ext4_truncate+0x436/0x440 [ext4] ext4_process_orphan+0x5d/0x110 [ext4] ext4_orphan_cleanup+0x124/0x4f0 [ext4] ext4_fill_super+0x262d/0x3110 [ext4] get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x26/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4ed/0x6b0 do_syscall_64+0x82/0x170 ... This occurs when processing a symlink inode from the orphan list. The partial block zeroing code in the truncate path calls ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an a_ops vector in ext4, hence the crash. To avoid this problem, update the ext4_dirty_journalled_data() helper to only mark the folio dirty on regular files (for which a_ops is assigned). This also matches the journaling logic in the ext4_symlink() creation path, where ext4_handle_dirty_metadata() is called directly.
CVE-2025-38219 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38218 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: hwmon: (ftsteutates) Fix TOCTOU race in fts_read() In the fts_read() function, when handling hwmon_pwm_auto_channels_temp, the code accesses the shared variable data->fan_source[channel] twice without holding any locks. It is first checked against FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again when used as an argument to the BIT() macro. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition. Another thread executing fts_update_device() can modify the value of data->fan_source[channel] between the check and its use. If the value is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the BIT() macro will be called with a large shift value (BIT(255)). A bit shift by a value greater than or equal to the type width is undefined behavior and can lead to a crash or incorrect values being returned to userspace. Fix this by reading data->fan_source[channel] into a local variable once, eliminating the race condition. Additionally, add a bounds check to ensure the value is less than BITS_PER_LONG before passing it to the BIT() macro, making the code more robust against undefined behavior. This possible bug was found by an experimental static analysis tool developed by our team.
In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in do_register_framebuffer() fails to allocate memory for fb_videomode, it will later lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ Even though fbcon_init() checks beforehand if fb_match_mode() in var_to_display() fails, it can not prevent the panic because fbcon_init() does not return error code. Considering this and the comment in the code about fb_match_mode() returning NULL - "This should not happen" - it is better to prevent registering the fb_info if its mode was not set successfully. Also move fb_add_videomode() closer to the beginning of do_register_framebuffer() to avoid having to do the cleanup on fail. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix fb_set_var to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in fb_set_var() fails to allocate memory for fb_videomode, later it may lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ The reason is that fb_info->var is being modified in fb_set_var(), and then fb_videomode_to_var() is called. If it fails to add the mode to fb_info->modelist, fb_set_var() returns error, but does not restore the old value of fb_info->var. Restore fb_info->var on failure the same way it is done earlier in the function. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: ipc: fix to protect IPCS lookups using RCU syzbot reported that it discovered a use-after-free vulnerability, [0] [0]: https://lore.kernel.org/all/67af13f8.050a0220.21dd3.0038.GAE@google.com/ idr_for_each() is protected by rwsem, but this is not enough. If it is not protected by RCU read-critical region, when idr_for_each() calls radix_tree_node_free() through call_rcu() to free the radix_tree_node structure, the node will be freed immediately, and when reading the next node in radix_tree_for_each_slot(), the already freed memory may be read. Therefore, we need to add code to make sure that idr_for_each() is protected within the RCU read-critical region when we call it in shm_destroy_orphaned().
In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction The commit 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") simplified cm_id resource management by freeing cm_id once all references to the cm_id were removed. The references are removed either upon completion of iw_cm event handlers or when the application destroys the cm_id. This commit introduced the use-after-free condition where cm_id_private object could still be in use by event handler works during the destruction of cm_id. The commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs") addressed this use-after- free by flushing all pending works at the cm_id destruction. However, still another use-after-free possibility remained. It happens with the work objects allocated for each cm_id_priv within alloc_work_entries() during cm_id creation, and subsequently freed in dealloc_work_entries() once all references to the cm_id are removed. If the cm_id's last reference is decremented in the event handler work, the work object for the work itself gets removed, and causes the use- after-free BUG below: BUG: KASAN: slab-use-after-free in __pwq_activate_work+0x1ff/0x250 Read of size 8 at addr ffff88811f9cf800 by task kworker/u16:1/147091 CPU: 2 UID: 0 PID: 147091 Comm: kworker/u16:1 Not tainted 6.15.0-rc2+ #27 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Workqueue: 0x0 (iw_cm_wq) Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_report+0x174/0x554 ? __virt_addr_valid+0x208/0x430 ? __pwq_activate_work+0x1ff/0x250 kasan_report+0xae/0x170 ? __pwq_activate_work+0x1ff/0x250 __pwq_activate_work+0x1ff/0x250 pwq_dec_nr_in_flight+0x8c5/0xfb0 process_one_work+0xc11/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5ef/0xfd0 ? __pfx_worker_thread+0x10/0x10 kthread+0x3b0/0x770 ? __pfx_kthread+0x10/0x10 ? rcu_is_watching+0x11/0xb0 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 147416: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 alloc_work_entries+0xa9/0x260 [iw_cm] iw_cm_connect+0x23/0x4a0 [iw_cm] rdma_connect_locked+0xbfd/0x1920 [rdma_cm] nvme_rdma_cm_handler+0x8e5/0x1b60 [nvme_rdma] cma_cm_event_handler+0xae/0x320 [rdma_cm] cma_work_handler+0x106/0x1b0 [rdma_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Freed by task 147091: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kfree+0x13a/0x4b0 dealloc_work_entries+0x125/0x1f0 [iw_cm] iwcm_deref_id+0x6f/0xa0 [iw_cm] cm_work_handler+0x136/0x1ba0 [iw_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x2c/0x50 kasan_record_aux_stack+0xa3/0xb0 __queue_work+0x2ff/0x1390 queue_work_on+0x67/0xc0 cm_event_handler+0x46a/0x820 [iw_cm] siw_cm_upcall+0x330/0x650 [siw] siw_cm_work_handler+0x6b9/0x2b20 [siw] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 This BUG is reproducible by repeating the blktests test case nvme/061 for the rdma transport and the siw driver. To avoid the use-after-free of cm_id_private work objects, ensure that the last reference to the cm_id is decremented not in the event handler works, but in the cm_id destruction context. For that purpose, mo ---truncated---
In the Linux kernel, the following vulnerability has been resolved: configfs-tsm-report: Fix NULL dereference of tsm_ops Unlike sysfs, the lifetime of configfs objects is controlled by userspace. There is no mechanism for the kernel to find and delete all created config-items. Instead, the configfs-tsm-report mechanism has an expectation that tsm_unregister() can happen at any time and cause established config-item access to start failing. That expectation is not fully satisfied. While tsm_report_read(), tsm_report_{is,is_bin}_visible(), and tsm_report_make_item() safely fail if tsm_ops have been unregistered, tsm_report_privlevel_store() tsm_report_provider_show() fail to check for ops registration. Add the missing checks for tsm_ops having been removed. Now, in supporting the ability for tsm_unregister() to always succeed, it leaves the problem of what to do with lingering config-items. The expectation is that the admin that arranges for the ->remove() (unbind) of the ${tsm_arch}-guest driver is also responsible for deletion of all open config-items. Until that deletion happens, ->probe() (reload / bind) of the ${tsm_arch}-guest driver fails. This allows for emergency shutdown / revocation of attestation interfaces, and requires coordinated restart.
In the Linux kernel, the following vulnerability has been resolved: smb: client: add NULL check in automount_fullpath page is checked for null in __build_path_from_dentry_optional_prefix when tcon->origin_fullpath is not set. However, the check is missing when it is set. Add a check to prevent a potential NULL pointer dereference.
CVE-2025-38207 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38206 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds read in add_missing_indices stbl is s8 but it must contain offsets into slot which can go from 0 to 127. Added a bound check for that error and return -EIO if the check fails. Also make jfs_readdir return with error if add_missing_indices returns with an error.
In the Linux kernel, the following vulnerability has been resolved: jfs: Fix null-ptr-deref in jfs_ioc_trim [ Syzkaller Report ] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000087: 0000 [#1 KASAN: null-ptr-deref in range [0x0000000000000438-0x000000000000043f] CPU: 2 UID: 0 PID: 10614 Comm: syz-executor.0 Not tainted 6.13.0-rc6-gfbfd64d25c7a-dirty #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-30ms RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body+0x61/0xb0 ? die_addr+0xb1/0xe0 ? exc_general_protection+0x333/0x510 ? asm_exc_general_protection+0x26/0x30 ? jfs_ioc_trim+0x34b/0x8f0 jfs_ioctl+0x3c8/0x4f0 ? __pfx_jfs_ioctl+0x10/0x10 ? __pfx_jfs_ioctl+0x10/0x10 __se_sys_ioctl+0x269/0x350 ? __pfx___se_sys_ioctl+0x10/0x10 ? do_syscall_64+0xfb/0x210 do_syscall_64+0xee/0x210 ? syscall_exit_to_user_mode+0x1e0/0x330 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe51f4903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d RSP: 002b:00007fe5202250c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fe51f5cbf80 RCX: 00007fe51f4903ad RDX: 0000000020000680 RSI: 00000000c0185879 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe520225640 R13: 000000000000000e R14: 00007fe51f44fca0 R15: 00007fe52021d000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Kernel panic - not syncing: Fatal exception [ Analysis ] We believe that we have found a concurrency bug in the `fs/jfs` module that results in a null pointer dereference. There is a closely related issue which has been fixed: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234 ... but, unfortunately, the accepted patch appears to still be susceptible to a null pointer dereference under some interleavings. To trigger the bug, we think that `JFS_SBI(ipbmap->i_sb)->bmap` is set to NULL in `dbFreeBits` and then dereferenced in `jfs_ioc_trim`. This bug manifests quite rarely under normal circumstances, but is triggereable from a syz-program.
CVE-2025-38202 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: i40e: fix MMIO write access to an invalid page in i40e_clear_hw When the device sends a specific input, an integer underflow can occur, leading to MMIO write access to an invalid page. Prevent the integer underflow by changing the type of related variables.
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix memory leak due to multiple rx_stats allocation rx_stats for each arsta is allocated when adding a station. arsta->rx_stats will be freed when a station is removed. Redundant allocations are occurring when the same station is added multiple times. This causes ath12k_mac_station_add() to be called multiple times, and rx_stats is allocated each time. As a result there is memory leaks. Prevent multiple allocations of rx_stats when ath12k_mac_station_add() is called repeatedly by checking if rx_stats is already allocated before allocating again. Allocate arsta->rx_stats if arsta->rx_stats is NULL respectively. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
In the Linux kernel, the following vulnerability has been resolved: fbcon: Make sure modelist not set on unregistered console It looks like attempting to write to the "store_modes" sysfs node will run afoul of unregistered consoles: UBSAN: array-index-out-of-bounds in drivers/video/fbdev/core/fbcon.c:122:28 index -1 is out of range for type 'fb_info *[32]' ... fbcon_info_from_console+0x192/0x1a0 drivers/video/fbdev/core/fbcon.c:122 fbcon_new_modelist+0xbf/0x2d0 drivers/video/fbdev/core/fbcon.c:3048 fb_new_modelist+0x328/0x440 drivers/video/fbdev/core/fbmem.c:673 store_modes+0x1c9/0x3e0 drivers/video/fbdev/core/fbsysfs.c:113 dev_attr_store+0x55/0x80 drivers/base/core.c:2439 static struct fb_info *fbcon_registered_fb[FB_MAX]; ... static signed char con2fb_map[MAX_NR_CONSOLES]; ... static struct fb_info *fbcon_info_from_console(int console) ... return fbcon_registered_fb[con2fb_map[console]]; If con2fb_map contains a -1 things go wrong here. Instead, return NULL, as callers of fbcon_info_from_console() are trying to compare against existing "info" pointers, so error handling should kick in correctly.
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL access in assign channel context handler Currently, when ath12k_mac_assign_vif_to_vdev() fails, the radio handle (ar) gets accessed from the link VIF handle (arvif) for debug logging, This is incorrect. In the fail scenario, radio handle is NULL. Fix the NULL access, avoid radio handle access by moving to the hardware debug logging helper function (ath12k_hw_warn). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
CVE-2025-38293 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38286 is an out-of-bounds array access vulnerability in the Linux kernel's AT91 GPIO pinctrl driver caused by insufficient validation of device tree alias values during probe. A local attacker with low privileges can trigger an out-of-bounds read or write to the gpio_chips array, potentially leading to information disclosure or denial of service. The vulnerability affects Linux kernel versions with the vulnerable at91_gpio_probe() function and is not currently listed in CISA KEV, indicating limited evidence of active exploitation.
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARN() in get_bpf_raw_tp_regs syzkaller reported an issue: WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861 Modules linked in: CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861 RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005 RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003 R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004 R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900 FS: 0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline] bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931 bpf_prog_ec3b2eefa702d8d3+0x43/0x47 bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline] __bpf_prog_run include/linux/filter.h:718 [inline] bpf_prog_run include/linux/filter.h:725 [inline] __bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline] bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405 __bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47 __traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47 __do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline] trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline] __mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35 __mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline] mmap_read_trylock include/linux/mmap_lock.h:204 [inline] stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157 __bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483 ____bpf_get_stack kernel/bpf/stackmap.c:499 [inline] bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496 ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline] bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931 bpf_prog_ec3b2eefa702d8d3+0x43/0x47 Tracepoint like trace_mmap_lock_acquire_returned may cause nested call as the corner case show above, which will be resolved with more general method in the future. As a result, WARN_ON_ONCE will be triggered. As Alexei suggested, remove the WARN_ON_ONCE first.
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: configure manual DAC mode via PCI config API only To support 36-bit DMA, configure chip proprietary bit via PCI config API or chip DBI interface. However, the PCI device mmap isn't set yet and the DBI is also inaccessible via mmap, so only if the bit can be accessible via PCI config API, chip can support 36-bit DMA. Otherwise, fallback to 32-bit DMA. With NULL mmap address, kernel throws trace: BUG: unable to handle page fault for address: 0000000000001090 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 71 Comm: irq/26-pciehp Tainted: G OE 6.14.2-061402-generic #202504101348 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE RIP: 0010:rtw89_pci_ops_write16+0x12/0x30 [rtw89_pci] RSP: 0018:ffffb0ffc0acf9d8 EFLAGS: 00010206 RAX: ffffffffc158f9c0 RBX: ffff94865e702020 RCX: 0000000000000000 RDX: 0000000000000718 RSI: 0000000000001090 RDI: ffff94865e702020 RBP: ffffb0ffc0acf9d8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000015 R13: 0000000000000719 R14: ffffb0ffc0acfa1f R15: ffffffffc1813060 FS: 0000000000000000(0000) GS:ffff9486f3480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001090 CR3: 0000000090440001 CR4: 00000000000626f0 Call Trace: <TASK> rtw89_pci_read_config_byte+0x6d/0x120 [rtw89_pci] rtw89_pci_cfg_dac+0x5b/0xb0 [rtw89_pci] rtw89_pci_probe+0xa96/0xbd0 [rtw89_pci] ? __pfx___device_attach_driver+0x10/0x10 ? __pfx___device_attach_driver+0x10/0x10 local_pci_probe+0x47/0xa0 pci_call_probe+0x5d/0x190 pci_device_probe+0xa7/0x160 really_probe+0xf9/0x370 ? pm_runtime_barrier+0x55/0xa0 __driver_probe_device+0x8c/0x140 driver_probe_device+0x24/0xd0 __device_attach_driver+0xcd/0x170 bus_for_each_drv+0x99/0x100 __device_attach+0xb4/0x1d0 device_attach+0x10/0x20 pci_bus_add_device+0x59/0x90 pci_bus_add_devices+0x31/0x80 pciehp_configure_device+0xaa/0x170 pciehp_enable_slot+0xd6/0x240 pciehp_handle_presence_or_link_change+0xf1/0x180 pciehp_ist+0x162/0x1c0 irq_thread_fn+0x24/0x70 irq_thread+0xef/0x1c0 ? __pfx_irq_thread_fn+0x10/0x10 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xfc/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x47/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>
CVE-2025-38282 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Add NULL check in mt7996_thermal_init devm_kasprintf() can return a NULL pointer on failure,but this returned value in mt7996_thermal_init() is not checked. Add NULL check in mt7996_thermal_init(), to handle kernel NULL pointer dereference error.
CVE-2025-38280 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: mtd: nand: ecc-mxic: Fix use of uninitialized variable ret If ctx->steps is zero, the loop processing ECC steps is skipped, and the variable ret remains uninitialized. It is later checked and returned, which leads to undefined behavior and may cause unpredictable results in user space or kernel crashes. This scenario can be triggered in edge cases such as misconfigured geometry, ECC engine misuse, or if ctx->steps is not validated after initialization. Initialize ret to zero before the loop to ensure correct and safe behavior regardless of the ctx->steps value. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug The qmp_usb_iomap() helper function currently returns the raw result of devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return a NULL pointer and the caller only checks error pointers with IS_ERR(), NULL could bypass the check and lead to an invalid dereference. Fix the issue by checking if devm_ioremap() returns NULL. When it does, qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM), ensuring safe and consistent error handling.
In the Linux kernel, the following vulnerability has been resolved: fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt() fpga_mgr_test_img_load_sgt() allocates memory for sgt using kunit_kzalloc() however it does not check if the allocation failed. It then passes sgt to sg_alloc_table(), which passes it to __sg_alloc_table(). This function calls memset() on sgt in an attempt to zero it out. If the allocation fails then sgt will be NULL and the memset will trigger a NULL pointer dereference. Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL().
In the Linux kernel, the following vulnerability has been resolved: net: tipc: fix refcount warning in tipc_aead_encrypt syzbot reported a refcount warning [1] caused by calling get_net() on a network namespace that is being destroyed (refcount=0). This happens when a TIPC discovery timer fires during network namespace cleanup. The recently added get_net() call in commit e279024617134 ("net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done") attempts to hold a reference to the network namespace. However, if the namespace is already being destroyed, its refcount might be zero, leading to the use-after-free warning. Replace get_net() with maybe_get_net(), which safely checks if the refcount is non-zero before incrementing it. If the namespace is being destroyed, return -ENODEV early, after releasing the bearer reference. [1]: https://lore.kernel.org/all/68342b55.a70a0220.253bc2.0091.GAE@google.com/T/#m12019cf9ae77e1954f666914640efa36d52704a2
CVE-2025-38272 is a security vulnerability (CVSS 5.5) that allows eee. Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: net: prevent a NULL deref in rtnl_create_link() At the time rtnl_create_link() is running, dev->netdev_ops is NULL, we must not use netdev_lock_ops() or risk a NULL deref if CONFIG_NET_SHAPER is defined. Use netif_set_group() instead of dev_set_group(). RIP: 0010:netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] RIP: 0010:netdev_lock_ops include/net/netdev_lock.h:41 [inline] RIP: 0010:dev_set_group+0xc0/0x230 net/core/dev_api.c:82 Call Trace: <TASK> rtnl_create_link+0x748/0xd10 net/core/rtnetlink.c:3674 rtnl_newlink_create+0x25c/0xb00 net/core/rtnetlink.c:3813 __rtnl_newlink net/core/rtnetlink.c:3940 [inline] rtnl_newlink+0x16d6/0x1c70 net/core/rtnetlink.c:4055 rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6944 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2534 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x75b/0x8d0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline]
In the Linux kernel, the following vulnerability has been resolved: btrfs: exit after state insertion failure at btrfs_convert_extent_bit() If insert_state() state failed it returns an error pointer and we call extent_io_tree_panic() which will trigger a BUG() call. However if CONFIG_BUG is disabled, which is an uncommon and exotic scenario, then we fallthrough and call cache_state() which will dereference the error pointer, resulting in an invalid memory access. So jump to the 'out' label after calling extent_io_tree_panic(), it also makes the code more clear besides dealing with the exotic scenario where CONFIG_BUG is disabled.
In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: move tcpm_queue_vdm_unlocked to asynchronous work A state check was previously added to tcpm_queue_vdm_unlocked to prevent a deadlock where the DisplayPort Alt Mode driver would be executing work and attempting to grab the tcpm_lock while the TCPM was holding the lock and attempting to unregister the altmode, blocking on the altmode driver's cancel_work_sync call. Because the state check isn't protected, there is a small window where the Alt Mode driver could determine that the TCPM is in a ready state and attempt to grab the lock while the TCPM grabs the lock and changes the TCPM state to one that causes the deadlock. The callstack is provided below: [110121.667392][ C7] Call trace: [110121.667396][ C7] __switch_to+0x174/0x338 [110121.667406][ C7] __schedule+0x608/0x9f0 [110121.667414][ C7] schedule+0x7c/0xe8 [110121.667423][ C7] kernfs_drain+0xb0/0x114 [110121.667431][ C7] __kernfs_remove+0x16c/0x20c [110121.667436][ C7] kernfs_remove_by_name_ns+0x74/0xe8 [110121.667442][ C7] sysfs_remove_group+0x84/0xe8 [110121.667450][ C7] sysfs_remove_groups+0x34/0x58 [110121.667458][ C7] device_remove_groups+0x10/0x20 [110121.667464][ C7] device_release_driver_internal+0x164/0x2e4 [110121.667475][ C7] device_release_driver+0x18/0x28 [110121.667484][ C7] bus_remove_device+0xec/0x118 [110121.667491][ C7] device_del+0x1e8/0x4ac [110121.667498][ C7] device_unregister+0x18/0x38 [110121.667504][ C7] typec_unregister_altmode+0x30/0x44 [110121.667515][ C7] tcpm_reset_port+0xac/0x370 [110121.667523][ C7] tcpm_snk_detach+0x84/0xb8 [110121.667529][ C7] run_state_machine+0x4c0/0x1b68 [110121.667536][ C7] tcpm_state_machine_work+0x94/0xe4 [110121.667544][ C7] kthread_worker_fn+0x10c/0x244 [110121.667552][ C7] kthread+0x104/0x1d4 [110121.667557][ C7] ret_from_fork+0x10/0x20 [110121.667689][ C7] Workqueue: events dp_altmode_work [110121.667697][ C7] Call trace: [110121.667701][ C7] __switch_to+0x174/0x338 [110121.667710][ C7] __schedule+0x608/0x9f0 [110121.667717][ C7] schedule+0x7c/0xe8 [110121.667725][ C7] schedule_preempt_disabled+0x24/0x40 [110121.667733][ C7] __mutex_lock+0x408/0xdac [110121.667741][ C7] __mutex_lock_slowpath+0x14/0x24 [110121.667748][ C7] mutex_lock+0x40/0xec [110121.667757][ C7] tcpm_altmode_enter+0x78/0xb4 [110121.667764][ C7] typec_altmode_enter+0xdc/0x10c [110121.667769][ C7] dp_altmode_work+0x68/0x164 [110121.667775][ C7] process_one_work+0x1e4/0x43c [110121.667783][ C7] worker_thread+0x25c/0x430 [110121.667789][ C7] kthread+0x104/0x1d4 [110121.667794][ C7] ret_from_fork+0x10/0x20 Change tcpm_queue_vdm_unlocked to queue for tcpm_queue_vdm_work, which can perform the state check while holding the TCPM lock while the Alt Mode lock is no longer held. This requires a new struct to hold the vdm data, altmode_vdm_event.
In the Linux kernel, the following vulnerability has been resolved: serial: jsm: fix NPE during jsm_uart_port_init No device was set which caused serial_base_ctrl_add to crash. BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1 Debian 6.12.25-1 RIP: 0010:serial_base_ctrl_add+0x96/0x120 Call Trace: <TASK> serial_core_register_port+0x1a0/0x580 ? __setup_irq+0x39c/0x660 ? __kmalloc_cache_noprof+0x111/0x310 jsm_uart_port_init+0xe8/0x180 [jsm] jsm_probe_one+0x1f4/0x410 [jsm] local_pci_probe+0x42/0x90 pci_device_probe+0x22f/0x270 really_probe+0xdb/0x340 ? pm_runtime_barrier+0x54/0x90 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8c/0xe0 bus_add_driver+0x112/0x1f0 driver_register+0x72/0xd0 jsm_init_module+0x36/0xff0 [jsm] ? __pfx_jsm_init_module+0x10/0x10 [jsm] do_one_initcall+0x58/0x310 do_init_module+0x60/0x230 Tested with Digi Neo PCIe 8 port card.
In the Linux kernel, the following vulnerability has been resolved: bcache: fix NULL pointer in cache_set_flush() 1. LINE#1794 - LINE#1887 is some codes about function of bch_cache_set_alloc(). 2. LINE#2078 - LINE#2142 is some codes about function of register_cache_set(). 3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098. 1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb) 1795 { ... 1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) || 1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) || 1862 mempool_init_kmalloc_pool(&c->bio_meta, 2, 1863 sizeof(struct bbio) + sizeof(struct bio_vec) * 1864 bucket_pages(c)) || 1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) || 1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio), 1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) || 1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) || 1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc", 1870 WQ_MEM_RECLAIM, 0)) || 1871 bch_journal_alloc(c) || 1872 bch_btree_cache_alloc(c) || 1873 bch_open_buckets_alloc(c) || 1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages))) 1875 goto err; ^^^^^^^^ 1876 ... 1883 return c; 1884 err: 1885 bch_cache_set_unregister(c); ^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1886 return NULL; 1887 } ... 2078 static const char *register_cache_set(struct cache *ca) 2079 { ... 2098 c = bch_cache_set_alloc(&ca->sb); 2099 if (!c) 2100 return err; ^^^^^^^^^^ ... 2128 ca->set = c; 2129 ca->set->cache[ca->sb.nr_this_dev] = ca; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ... 2138 return NULL; 2139 err: 2140 bch_cache_set_unregister(c); 2141 return err; 2142 } (1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and call bch_cache_set_unregister()(LINE#1885). (2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return. (3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the value to c->cache[], it means that c->cache[] is NULL. LINE#1624 - LINE#1665 is some codes about function of cache_set_flush(). As (1), in LINE#1885 call bch_cache_set_unregister() ---> bch_cache_set_stop() ---> closure_queue() -.-> cache_set_flush() (as below LINE#1624) 1624 static void cache_set_flush(struct closure *cl) 1625 { ... 1654 for_each_cache(ca, c, i) 1655 if (ca->alloc_thread) ^^ 1656 kthread_stop(ca->alloc_thread); ... 1665 } (4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the kernel crash occurred as below: [ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory [ 846.713242] bcache: register_bcache() error : failed to register device [ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered [ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8 [ 846.714790] PGD 0 P4D 0 [ 846.715129] Oops: 0000 [#1] SMP PTI [ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1 [ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018 [ 846.716451] Workqueue: events cache_set_flush [bcache] [ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache] [ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 0 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: tty: serial: uartlite: register uart driver in init When two instances of uart devices are probing, a concurrency race can occur. If one thread calls uart_register_driver function, which first allocates and assigns memory to 'uart_state' member of uart_driver structure, the other instance can bypass uart driver registration and call ulite_assign. This calls uart_add_one_port, which expects the uart driver to be fully initialized. This leads to a kernel panic due to a null pointer dereference: [ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8 [ 8.156982] #PF: supervisor write access in kernel mode [ 8.156984] #PF: error_code(0x0002) - not-present page [ 8.156986] PGD 0 P4D 0 ... [ 8.180668] RIP: 0010:mutex_lock+0x19/0x30 [ 8.188624] Call Trace: [ 8.188629] ? __die_body.cold+0x1a/0x1f [ 8.195260] ? page_fault_oops+0x15c/0x290 [ 8.209183] ? __irq_resolve_mapping+0x47/0x80 [ 8.209187] ? exc_page_fault+0x64/0x140 [ 8.209190] ? asm_exc_page_fault+0x22/0x30 [ 8.209196] ? mutex_lock+0x19/0x30 [ 8.223116] uart_add_one_port+0x60/0x440 [ 8.223122] ? proc_tty_register_driver+0x43/0x50 [ 8.223126] ? tty_register_driver+0x1ca/0x1e0 [ 8.246250] ulite_probe+0x357/0x4b0 [uartlite] To prevent it, move uart driver registration in to init function. This will ensure that uart_driver is always registered when probe function is called.
In the Linux kernel, the following vulnerability has been resolved: btrfs: handle csum tree error with rescue=ibadroots correctly [BUG] There is syzbot based reproducer that can crash the kernel, with the following call trace: (With some debug output added) DEBUG: rescue=ibadroots parsed BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010) BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8 BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm BTRFS info (device loop0): using free-space-tree BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0 DEBUG: read tree root path failed for tree csum, ret=-5 BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0 BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0 process 'repro' launched './file2' with NULL argv: empty string added DEBUG: no csum root, idatacsums=0 ibadroots=134217728 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs] Call Trace: <TASK> btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs] btrfs_submit_bbio+0x43e/0x1a80 [btrfs] submit_one_bio+0xde/0x160 [btrfs] btrfs_readahead+0x498/0x6a0 [btrfs] read_pages+0x1c3/0xb20 page_cache_ra_order+0x4b5/0xc20 filemap_get_pages+0x2d3/0x19e0 filemap_read+0x314/0xde0 __kernel_read+0x35b/0x900 bprm_execve+0x62e/0x1140 do_execveat_common.isra.0+0x3fc/0x520 __x64_sys_execveat+0xdc/0x130 do_syscall_64+0x54/0x1d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ---[ end trace 0000000000000000 ]--- [CAUSE] Firstly the fs has a corrupted csum tree root, thus to mount the fs we have to go "ro,rescue=ibadroots" mount option. Normally with that mount option, a bad csum tree root should set BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will ignore csum search. But in this particular case, we have the following call trace that caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS: load_global_roots_objectid(): ret = btrfs_search_slot(); /* Succeeded */ btrfs_item_key_to_cpu() found = true; /* We found the root item for csum tree. */ root = read_tree_root_path(); if (IS_ERR(root)) { if (!btrfs_test_opt(fs_info, IGNOREBADROOTS)) /* * Since we have rescue=ibadroots mount option, * @ret is still 0. */ break; if (!found || ret) { /* @found is true, @ret is 0, error handling for csum * tree is skipped. */ } This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if the csum tree is corrupted, which results unexpected later csum lookup. [FIX] If read_tree_root_path() failed, always populate @ret to the error number. As at the end of the function, we need @ret to determine if we need to do the extra error handling for csum tree.
In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9335: Fix missing free of regulator supplies Driver gets and enables all regulator supplies in probe path (wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup in final error paths and in unbind (missing remove() callback). This leads to leaked memory and unbalanced regulator enable count during probe errors or unbind. Fix this by converting entire code into devm_regulator_bulk_get_enable() which also greatly simplifies the code.
In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write memcg_path_store() assigns a newly allocated memory buffer to filter->memcg_path, without deallocating the previously allocated and assigned memory buffer. As a result, users can leak kernel memory by continuously writing a data to memcg_path DAMOS sysfs file. Fix the leak by deallocating the previously set memory buffer.
CVE-2025-38257 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
CVE-2025-38256 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: lib/group_cpus: fix NULL pointer dereference from group_cpus_evenly() While testing null_blk with configfs, echo 0 > poll_queues will trigger following panic: BUG: kernel NULL pointer dereference, address: 0000000000000010 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 27 UID: 0 PID: 920 Comm: bash Not tainted 6.15.0-02023-gadbdb95c8696-dirty #1238 PREEMPT(undef) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__bitmap_or+0x48/0x70 Call Trace: <TASK> __group_cpus_evenly+0x822/0x8c0 group_cpus_evenly+0x2d9/0x490 blk_mq_map_queues+0x1e/0x110 null_map_queues+0xc9/0x170 [null_blk] blk_mq_update_queue_map+0xdb/0x160 blk_mq_update_nr_hw_queues+0x22b/0x560 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_poll_queues_store+0xa4/0x130 [null_blk] configfs_write_iter+0x109/0x1d0 vfs_write+0x26e/0x6f0 ksys_write+0x79/0x180 __x64_sys_write+0x1d/0x30 x64_sys_call+0x45c4/0x45f0 do_syscall_64+0xa5/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e Root cause is that numgrps is set to 0, and ZERO_SIZE_PTR is returned from kcalloc(), and later ZERO_SIZE_PTR will be deferenced. Fix the problem by checking numgrps first in group_cpus_evenly(), and return NULL directly if numgrps is zero. [yukuai3@huawei.com: also fix the non-SMP version]
CVE-2025-38254 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: atm: clip: prevent NULL deref in clip_push() Blamed commit missed that vcc_destroy_socket() calls clip_push() with a NULL skb. If clip_devs is NULL, clip_push() then crashes when reading skb->truesize.
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3() In snd_usb_get_audioformat_uac3(), the length value returned from snd_usb_ctl_msg() is used directly for memory allocation without validation. This length is controlled by the USB device. The allocated buffer is cast to a uac3_cluster_header_descriptor and its fields are accessed without verifying that the buffer is large enough. If the device returns a smaller than expected length, this leads to an out-of-bounds read. Add a length check to ensure the buffer is large enough for uac3_cluster_header_descriptor.
CVE-2025-38247 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38245 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid inode pointer dereferences during log replay In a few places where we call read_one_inode(), if we get a NULL pointer we end up jumping into an error path, or fallthrough in case of __add_inode_ref(), where we then do something like this: iput(&inode->vfs_inode); which results in an invalid inode pointer that triggers an invalid memory access, resulting in a crash. Fix this by making sure we don't do such dereferences.
In the Linux kernel, the following vulnerability has been resolved: mm/shmem, swap: fix softlockup with mTHP swapin Following softlockup can be easily reproduced on my test machine with: echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device mkdir -p /sys/fs/cgroup/memory/test echo 1G > /sys/fs/cgroup/test/memory.max echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs while true; do dd if=/dev/zero of=/tmp/test.img bs=1M count=5120 cat /tmp/test.img > /dev/null rm /tmp/test.img done Then after a while: watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787] Modules linked in: zram virtiofs CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G L 6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)· Tainted: [L]=SOFTLOCKUP Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015 RIP: 0010:mpol_shared_policy_lookup+0xd/0x70 Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8 RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202 RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001 RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518 RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001 R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000 FS: 00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> shmem_alloc_folio+0x31/0xc0 shmem_swapin_folio+0x309/0xcf0 ? filemap_get_entry+0x117/0x1e0 ? xas_load+0xd/0xb0 ? filemap_get_entry+0x101/0x1e0 shmem_get_folio_gfp+0x2ed/0x5b0 shmem_file_read_iter+0x7f/0x2e0 vfs_read+0x252/0x330 ksys_read+0x68/0xf0 do_syscall_64+0x4c/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f03f9a46991 Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991 RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003 RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000 </TASK> The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in conflict with it, so swapcache_prepare fails and causes shmem_swap_alloc_folio to return -EEXIST, and shmem simply retries again and again causing this loop. Fix it by applying a similar fix for anon mTHP swapin. The performance change is very slight, time of swapin 10g zero folios with shmem (test for 12 times): Before: 2.47s After: 2.48s [kasong@tencent.com: add comment]
In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix invalid node index On a system with DRAM interleave enabled, out-of-bound access is detected: megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x46/0x4b megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas] megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas] local_pci_probe+0x42/0x90 pci_device_probe+0xdc/0x290 really_probe+0xdb/0x340 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8b/0xe0 bus_add_driver+0x142/0x220 driver_register+0x72/0xd0 megasas_init+0xdf/0xff0 [megaraid_sas] do_one_initcall+0x57/0x310 do_init_module+0x90/0x250 init_module_from_file+0x85/0xc0 idempotent_init_module+0x114/0x310 __x64_sys_finit_module+0x65/0xc0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it accordingly.
Helm is a package manager for Charts for Kubernetes. Prior to 3.18.4, a specially crafted Chart.yaml file along with a specially linked Chart.lock file can lead to local code execution when dependencies are updated. Fields in a Chart.yaml file, that are carried over to a Chart.lock file when dependencies are updated and this file is written, can be crafted in a way that can cause execution if that same content were in a file that is executed (e.g., a bash.rc file or shell script). If the Chart.lock file is symlinked to one of these files updating dependencies will write the lock file content to the symlinked file. This can lead to unwanted execution. Helm warns of the symlinked file but did not stop execution due to symlinking. This issue has been resolved in Helm v3.18.4.
Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. The wincred credential helper uses a static buffer (target) as a unique key for storing and comparing against internal storage. This credential helper does not properly bounds check the available space remaining in the buffer before appending to it with wcsncat(), leading to potential buffer overflows. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1.
Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When cloning a repository Git knows to optionally fetch a bundle advertised by the remote server, which allows the server-side to offload parts of the clone to a CDN. The Git client does not perform sufficient validation of the advertised bundles, which allows the remote side to perform protocol injection. This protocol injection can cause the client to write the fetched bundle to a location controlled by the adversary. The fetched content is fully controlled by the server, which can in the worst case lead to arbitrary code execution. The use of bundle URIs is not enabled by default and can be controlled by the bundle.heuristic config option. Some cases of the vulnerability require that the adversary is in control of where a repository will be cloned to. This either requires social engineering or a recursive clone with submodules. These cases can thus be avoided by disabling recursive clones. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1.
In Juju versions prior to 3.6.8 and 2.9.52, any authenticated controller user was allowed to upload arbitrary agent binaries to any model or to the controller itself, without verifying model membership or requiring explicit permissions. This enabled the distribution of poisoned binaries to new or upgraded machines, potentially resulting in remote code execution.
The /charms endpoint on a Juju controller lacked sufficient authorization checks, allowing any user with an account on the controller to upload a charm. Uploading a malicious charm that exploits a Zip Slip vulnerability could allow an attacker to gain access to a machine running a unit through the affected charm.
The /log endpoint on a Juju controller lacked sufficient authorization checks, allowing unauthorized users to access debug messages that could contain sensitive information.
A transient execution vulnerability in some AMD processors may allow an attacker to infer data in the L1D cache, potentially resulting in the leakage of sensitive information across privileged boundaries.
A security vulnerability in some AMD processors may allow an attacker to infer data from previous stores (CVSS 5.6) that allows an attacker. Remediation should follow standard vulnerability management procedures. Vendor patch is available.
A transient execution vulnerability in some AMD processors may allow a user process to infer TSC_AUX even when such a read is disabled, potentially resulting in information leakage.
A transient execution vulnerability in some AMD processors may allow a user process to infer the control registers speculatively even if UMIP feature is enabled, potentially resulting in information leakage.
CVE-2025-38237 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: af_unix: Don't leave consecutive consumed OOB skbs. Jann Horn reported a use-after-free in unix_stream_read_generic(). The following sequences reproduce the issue: $ python3 from socket import * s1, s2 = socketpair(AF_UNIX, SOCK_STREAM) s1.send(b'x', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'y', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'z', MSG_OOB) s2.recv(1) # recv 'z' illegally s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free) Even though a user reads OOB data, the skb holding the data stays on the recv queue to mark the OOB boundary and break the next recv(). After the last send() in the scenario above, the sk2's recv queue has 2 leading consumed OOB skbs and 1 real OOB skb. Then, the following happens during the next recv() without MSG_OOB 1. unix_stream_read_generic() peeks the first consumed OOB skb 2. manage_oob() returns the next consumed OOB skb 3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb 4. unix_stream_read_generic() reads and frees the OOB skb , and the last recv(MSG_OOB) triggers KASAN splat. The 3. above occurs because of the SO_PEEK_OFF code, which does not expect unix_skb_len(skb) to be 0, but this is true for such consumed OOB skbs. while (skip >= unix_skb_len(skb)) { skip -= unix_skb_len(skb); skb = skb_peek_next(skb, &sk->sk_receive_queue); ... } In addition to this use-after-free, there is another issue that ioctl(SIOCATMARK) does not function properly with consecutive consumed OOB skbs. So, nothing good comes out of such a situation. Instead of complicating manage_oob(), ioctl() handling, and the next ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs, let's not leave such consecutive OOB unnecessarily. Now, while receiving an OOB skb in unix_stream_recv_urg(), if its previous skb is a consumed OOB skb, it is freed. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027) Read of size 4 at addr ffff888106ef2904 by task python3/315 CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:636) unix_stream_read_actor (net/unix/af_unix.c:3027) unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f8911fcea06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06 RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006 RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20 R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:348) kmem_cache_alloc_ ---truncated---
CVE-2025-7346 is a security vulnerability (CVSS 8.7). High severity vulnerability requiring prompt remediation.
LuaJIT through 2.1 and OpenRusty luajit2 before v2.1-20240314 have an out-of-bounds read in the stack-overflow handler in lj_state.c.
LuaJIT through 2.1 and OpenRusty luajit2 before v2.1-20240314 have an unsinking of IR_FSTORE for NULL metatable, which leads to Denial of Service (DoS).
LuaJIT through 2.1 and OpenRusty luajit2 before v2.1-20240626 have a stack-buffer-overflow in lj_strfmt_wfnum in lj_strfmt_num.c.
An authorized user can issue queries with duplicate _id fields, that leads to unexpected behavior in MongoDB Server, which may result to crash. This issue can only be triggered by authorized users and cause Denial of Service. This issue affects MongoDB Server v8.1 version 8.1.0.
Redis is an open source, in-memory database that persists on disk. An unauthenticated connection can cause repeated IP protocol errors, leading to client starvation and, ultimately, a denial of service. This vulnerability is fixed in 8.0.3, 7.4.5, 7.2.10, and 6.2.19.
Redis is an open source, in-memory database that persists on disk. From 2.8 to before 8.0.3, 7.4.5, 7.2.10, and 6.2.19, an authenticated user may use a specially crafted string to trigger a stack/heap out of bounds write on hyperloglog operations, potentially leading to remote code execution. The bug likely affects all Redis versions with hyperloglog operations implemented. This vulnerability is fixed in 8.0.3, 7.4.5, 7.2.10, and 6.2.19. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from executing hyperloglog operations. This can be done using ACL to restrict HLL commands.
MongoDB Server's mongos component can become unresponsive to new connections due to incorrect handling of incomplete data. This affects MongoDB when configured with load balancer support. This issue affects MongoDB Server v6.0 prior to 6.0.23, MongoDB Server v7.0 prior to 7.0.20 and MongoDB Server v8.0 prior to 8.0.9 Required Configuration: This affects MongoDB sharded clusters when configured with load balancer support for mongos using HAProxy on specified ports.
An unauthorized user may leverage a specially crafted aggregation pipeline to access data without proper authorization due to improper handling of the $mergeCursors stage in MongoDB Server. This may lead to access to data without further authorisation. This issue affects MongoDB Server MongoDB Server v8.0 versions prior to 8.0.7, MongoDB Server v7.0 versions prior to 7.0.19 and MongoDB Server v6.0 versions prior to 6.0.22
MongoDB Server may be susceptible to disruption caused by high memory usage, potentially leading to server crash. This condition is linked to inefficiencies in memory management related to internal operations. In scenarios where certain internal processes persist longer than anticipated, memory consumption can increase, potentially impacting server stability and availability. This issue affects MongoDB Server v8.0 versions prior to 8.0.10
An issue has been identified in MongoDB Server where unredacted queries may inadvertently appear in server logs when certain error conditions are encountered. This issue affects MongoDB Server v8.0 versions prior to 8.0.5, MongoDB Server v7.0 versions prior to 7.0.18 and MongoDB Server v6.0 versions prior to 6.0.21.
CVE-2025-38235 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
The protobuf crate before 3.7.2 for Rust allows uncontrolled recursion in the protobuf::coded_input_stream::CodedInputStream::skip_group parsing of unknown fields in untrusted input.
In Alinto SOPE SOGo 2.0.2 through 5.12.2, sope-core/NGExtensions/NGHashMap.m allows a NULL pointer dereference and SOGo crash via a request in which a parameter in the query string is a duplicate of a parameter in the POST body.
A security vulnerability in Mbed TLS before 3.6.4 (CVSS 4.8). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
Mbed TLS before 3.6.4 has a race condition in AESNI detection if certain compiler optimizations occur. An attacker may be able to extract an AES key from a multithreaded program, or perform a GCM forgery.
OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In version 4.5.0, using a specially crafted tee-supplicant binary running in REE userspace, an attacker can trigger a panic in a TA that uses the libutee Secure Storage API. Many functions in libutee, specifically those which make up the Secure Storage API, will panic if a system call returns an unexpected return code. This behavior is mandated by the TEE Internal Core API specification. However, in OP-TEE’s implementation, return codes of secure storage operations are passed through unsanitized from the REE tee-supplicant, through the Linux kernel tee-driver, through the OP-TEE kernel, back to libutee. Thus, an attacker with access to REE userspace, and the ability to stop tee-supplicant and replace it with their own process (generally trivial for a root user, and depending on the way permissions are set up, potentially available even to less privileged users) can run a malicious tee-supplicant process that responds to storage requests with unexpected response codes, triggering a panic in the requesting TA. This is particularly dangerous for TAs built with `TA_FLAG_SINGLE_INSTANCE` (corresponding to `gpd.ta.singleInstance` and `TA_FLAG_INSTANCE_KEEP_ALIVE` (corresponding to `gpd.ta.keepAlive`). The behavior of these TAs may depend on memory that is preserved between sessions, and the ability of an attacker to panic the TA and reload it with a clean memory space can compromise the behavior of those TAs. A critical example of this is the optee_ftpm TA. It uses the kept alive memory to hold PCR values, which crucially must be non-resettable. An attacker who can trigger a panic in the fTPM TA can reset the PCRs, and then extend them PCRs with whatever they choose, falsifying boot measurements, accessing sealed data, and potentially more. The impact of this issue depends significantly on the behavior of affected TAs. For some, it could manifest as a denial of service, while for others, like the fTPM TA, it can result in the disclosure of sensitive data. Anyone running the fTPM TA is affected, but similar attacks may be possible on other TAs that leverage the Secure Storage API. A fix is available in commit 941a58d78c99c4754fbd4ec3079ec9e1d596af8f.
In the Linux kernel, the following vulnerability has been resolved: nfsd: Initialize ssc before laundromat_work to prevent NULL dereference In nfs4_state_start_net(), laundromat_work may access nfsd_ssc through nfs4_laundromat -> nfsd4_ssc_expire_umount. If nfsd_ssc isn't initialized, this can cause NULL pointer dereference. Normally the delayed start of laundromat_work allows sufficient time for nfsd_ssc initialization to complete. However, when the kernel waits too long for userspace responses (e.g. in nfs4_state_start_net -> nfsd4_end_grace -> nfsd4_record_grace_done -> nfsd4_cld_grace_done -> cld_pipe_upcall -> __cld_pipe_upcall -> wait_for_completion path), the delayed work may start before nfsd_ssc initialization finishes. Fix this by moving nfsd_ssc initialization before starting laundromat_work.
In the Linux kernel, the following vulnerability has been resolved: jfs: validate AG parameters in dbMount() to prevent crashes Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch corrupted metadata early and avoid undefined behavior in dbAllocAG. Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE: - agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift (L2LPERCTL - 2*agheight) >= 0. - agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight)) ensures agperlev >= 1. - Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5). - LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG; 2^(10 - 2*agheight) prevents division to 0. - agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within stree (size 1365). - Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8). UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9 shift exponent -335544310 is negative CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468 dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400 dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613 jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105 jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: media: cxusb: no longer judge rbuf when the write fails syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the Linux kernel, the following vulnerability has been resolved: media: imagination: fix a potential memory leak in e5010_probe() Add video_device_release() to release the memory allocated by video_device_alloc() if something goes wrong.
In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Terminating the subsequent process of initialization failure syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1] After PSI initialization fails, the si member is accessed again, resulting in this uaf. After si initialization fails, the subsequent process needs to be exited. [1] BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline] BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059 CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xd9/0x110 mm/kasan/report.c:634 vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 __do_sys_exit_group kernel/exit.c:1098 [inline] __se_sys_exit_group kernel/exit.c:1096 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096 x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f871d58d169 Code: Unable to access opcode bytes at 0x7f871d58d13f. RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169 RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003 R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840 </TASK> Allocated by task 6059: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970 vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423 vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_tabl ---truncated---
In the Linux kernel, the following vulnerability has been resolved: media: vivid: Change the siize of the composing syzkaller found a bug: BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline] BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705 Write of size 1440 at addr ffffc9000d0ffda0 by task vivid-000-vid-c/5304 CPU: 0 UID: 0 PID: 5304 Comm: vivid-000-vid-c Not tainted 6.14.0-rc2-syzkaller-00039-g09fbf3d50205 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline] tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705 vivid_fillbuff drivers/media/test-drivers/vivid/vivid-kthread-cap.c:470 [inline] vivid_thread_vid_cap_tick+0xf8e/0x60d0 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:629 vivid_thread_vid_cap+0x8aa/0xf30 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:767 kthread+0x7a9/0x920 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> The composition size cannot be larger than the size of fmt_cap_rect. So execute v4l2_rect_map_inside() even if has_compose_cap == 0.
In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Cleanup after an allocation error When allocation failures are not cleaned up by the driver, further allocation errors will be false-positives, which will cause buffers to remain uninitialized and cause NULL pointer dereferences. Ensure proper cleanup of failed allocations to prevent these issues.
In the Linux kernel, the following vulnerability has been resolved: ceph: avoid kernel BUG for encrypted inode with unaligned file size The generic/397 test hits a BUG_ON for the case of encrypted inode with unaligned file size (for example, 33K or 1K): [ 877.737811] run fstests generic/397 at 2025-01-03 12:34:40 [ 877.875761] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.876130] libceph: client4614 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 877.991965] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.992334] libceph: client4617 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.017234] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.017594] libceph: client4620 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.031394] xfs_io (pid 18988) is setting deprecated v1 encryption policy; recommend upgrading to v2. [ 878.054528] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.054892] libceph: client4623 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.070287] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.070704] libceph: client4626 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.264586] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.265258] libceph: client4629 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.374578] -----------[ cut here ]------------ [ 878.374586] kernel BUG at net/ceph/messenger.c:1070! [ 878.375150] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 878.378145] CPU: 2 UID: 0 PID: 4759 Comm: kworker/2:9 Not tainted 6.13.0-rc5+ #1 [ 878.378969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 878.380167] Workqueue: ceph-msgr ceph_con_workfn [ 878.381639] RIP: 0010:ceph_msg_data_cursor_init+0x42/0x50 [ 878.382152] Code: 89 17 48 8b 46 70 55 48 89 47 08 c7 47 18 00 00 00 00 48 89 e5 e8 de cc ff ff 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 0f 0b <0f> 0b 0f 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 [ 878.383928] RSP: 0018:ffffb4ffc7cbbd28 EFLAGS: 00010287 [ 878.384447] RAX: ffffffff82bb9ac0 RBX: ffff981390c2f1f8 RCX: 0000000000000000 [ 878.385129] RDX: 0000000000009000 RSI: ffff981288232b58 RDI: ffff981390c2f378 [ 878.385839] RBP: ffffb4ffc7cbbe18 R08: 0000000000000000 R09: 0000000000000000 [ 878.386539] R10: 0000000000000000 R11: 0000000000000000 R12: ffff981390c2f030 [ 878.387203] R13: ffff981288232b58 R14: 0000000000000029 R15: 0000000000000001 [ 878.387877] FS: 0000000000000000(0000) GS:ffff9814b7900000(0000) knlGS:0000000000000000 [ 878.388663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 878.389212] CR2: 00005e106a0554e0 CR3: 0000000112bf0001 CR4: 0000000000772ef0 [ 878.389921] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 878.390620] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 878.391307] PKRU: 55555554 [ 878.391567] Call Trace: [ 878.391807] <TASK> [ 878.392021] ? show_regs+0x71/0x90 [ 878.392391] ? die+0x38/0xa0 [ 878.392667] ? do_trap+0xdb/0x100 [ 878.392981] ? do_error_trap+0x75/0xb0 [ 878.393372] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.393842] ? exc_invalid_op+0x53/0x80 [ 878.394232] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.394694] ? asm_exc_invalid_op+0x1b/0x20 [ 878.395099] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.395583] ? ceph_con_v2_try_read+0xd16/0x2220 [ 878.396027] ? _raw_spin_unlock+0xe/0x40 [ 878.396428] ? raw_spin_rq_unlock+0x10/0x40 [ 878.396842] ? finish_task_switch.isra.0+0x97/0x310 [ 878.397338] ? __schedule+0x44b/0x16b0 [ 878.397738] ceph_con_workfn+0x326/0x750 [ 878.398121] process_one_work+0x188/0x3d0 [ 878.398522] ? __pfx_worker_thread+0x10/0x10 [ 878.398929] worker_thread+0x2b5/0x3c0 [ 878.399310] ? __pfx_worker_thread+0x10/0x10 [ 878.399727] kthread+0xe1/0x120 [ 878.400031] ? __pfx_kthread+0x10/0x10 [ 878.400431] ret_from_fork+0x43/0x70 [ 878.400771] ? __pfx_kthread+0x10/0x10 [ 878.401127] ret_from_fork_asm+0x1a/0x30 [ 878.401543] </TASK> [ 878.401760] Modules l ---truncated---
In the Linux kernel, the following vulnerability has been resolved: ext4: inline: fix len overflow in ext4_prepare_inline_data When running the following code on an ext4 filesystem with inline_data feature enabled, it will lead to the bug below. fd = open("file1", O_RDWR | O_CREAT | O_TRUNC, 0666); ftruncate(fd, 30); pwrite(fd, "a", 1, (1UL << 40) + 5UL); That happens because write_begin will succeed as when ext4_generic_write_inline_data calls ext4_prepare_inline_data, pos + len will be truncated, leading to ext4_prepare_inline_data parameter to be 6 instead of 0x10000000006. Then, later when write_end is called, we hit: BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); at ext4_write_inline_data. Fix it by using a loff_t type for the len parameter in ext4_prepare_inline_data instead of an unsigned int. [ 44.545164] ------------[ cut here ]------------ [ 44.545530] kernel BUG at fs/ext4/inline.c:240! [ 44.545834] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 44.546172] CPU: 3 UID: 0 PID: 343 Comm: test Not tainted 6.15.0-rc2-00003-g9080916f4863 #45 PREEMPT(full) 112853fcebfdb93254270a7959841d2c6aa2c8bb [ 44.546523] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 44.546523] RIP: 0010:ext4_write_inline_data+0xfe/0x100 [ 44.546523] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49 [ 44.546523] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216 [ 44.546523] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006 [ 44.546523] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738 [ 44.546523] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [ 44.546523] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000 [ 44.546523] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738 [ 44.546523] FS: 00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000 [ 44.546523] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 44.546523] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0 [ 44.546523] PKRU: 55555554 [ 44.546523] Call Trace: [ 44.546523] <TASK> [ 44.546523] ext4_write_inline_data_end+0x126/0x2d0 [ 44.546523] generic_perform_write+0x17e/0x270 [ 44.546523] ext4_buffered_write_iter+0xc8/0x170 [ 44.546523] vfs_write+0x2be/0x3e0 [ 44.546523] __x64_sys_pwrite64+0x6d/0xc0 [ 44.546523] do_syscall_64+0x6a/0xf0 [ 44.546523] ? __wake_up+0x89/0xb0 [ 44.546523] ? xas_find+0x72/0x1c0 [ 44.546523] ? next_uptodate_folio+0x317/0x330 [ 44.546523] ? set_pte_range+0x1a6/0x270 [ 44.546523] ? filemap_map_pages+0x6ee/0x840 [ 44.546523] ? ext4_setattr+0x2fa/0x750 [ 44.546523] ? do_pte_missing+0x128/0xf70 [ 44.546523] ? security_inode_post_setattr+0x3e/0xd0 [ 44.546523] ? ___pte_offset_map+0x19/0x100 [ 44.546523] ? handle_mm_fault+0x721/0xa10 [ 44.546523] ? do_user_addr_fault+0x197/0x730 [ 44.546523] ? do_syscall_64+0x76/0xf0 [ 44.546523] ? arch_exit_to_user_mode_prepare+0x1e/0x60 [ 44.546523] ? irqentry_exit_to_user_mode+0x79/0x90 [ 44.546523] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 44.546523] RIP: 0033:0x7f42999c6687 [ 44.546523] Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff [ 44.546523] RSP: 002b:00007ffeae4a7930 EFLAGS: 00000202 ORIG_RAX: 0000000000000012 [ 44.546523] RAX: ffffffffffffffda RBX: 00007f4299934740 RCX: 00007f42999c6687 [ 44.546523] RDX: 0000000000000001 RSI: 000055ea6149200f RDI: 0000000000000003 [ 44.546523] RBP: 00007ffeae4a79a0 R08: 0000000000000000 R09: 0000000000000000 [ 44.546523] R10: 0000010000000005 R11: 0000000000000202 R12: 0000 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: ext4: fix out of bounds punch offset Punching a hole with a start offset that exceeds max_end is not permitted and will result in a negative length in the truncate_inode_partial_folio() function while truncating the page cache, potentially leading to undesirable consequences. A simple reproducer: truncate -s 9895604649994 /mnt/foo xfs_io -c "pwrite 8796093022208 4096" /mnt/foo xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo kernel BUG at include/linux/highmem.h:275! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110 RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287 RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000 RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000 RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000 R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005 R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000 FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> truncate_inode_partial_folio+0x3dd/0x620 truncate_inode_pages_range+0x226/0x720 ? bdev_getblk+0x52/0x3e0 ? ext4_get_group_desc+0x78/0x150 ? crc32c_arch+0xfd/0x180 ? __ext4_get_inode_loc+0x18c/0x840 ? ext4_inode_csum+0x117/0x160 ? jbd2_journal_dirty_metadata+0x61/0x390 ? __ext4_handle_dirty_metadata+0xa0/0x2b0 ? kmem_cache_free+0x90/0x5a0 ? jbd2_journal_stop+0x1d5/0x550 ? __ext4_journal_stop+0x49/0x100 truncate_pagecache_range+0x50/0x80 ext4_truncate_page_cache_block_range+0x57/0x3a0 ext4_punch_hole+0x1fe/0x670 ext4_fallocate+0x792/0x17d0 ? __count_memcg_events+0x175/0x2a0 vfs_fallocate+0x121/0x560 ksys_fallocate+0x51/0xc0 __x64_sys_fallocate+0x24/0x40 x64_sys_call+0x18d2/0x4170 do_syscall_64+0xa7/0x220 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by filtering out cases where the punching start offset exceeds max_end.
In the Linux kernel, the following vulnerability has been resolved: ext4: only dirty folios when data journaling regular files fstest generic/388 occasionally reproduces a crash that looks as follows: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ext4_block_zero_page_range+0x30c/0x380 [ext4] ext4_truncate+0x436/0x440 [ext4] ext4_process_orphan+0x5d/0x110 [ext4] ext4_orphan_cleanup+0x124/0x4f0 [ext4] ext4_fill_super+0x262d/0x3110 [ext4] get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x26/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4ed/0x6b0 do_syscall_64+0x82/0x170 ... This occurs when processing a symlink inode from the orphan list. The partial block zeroing code in the truncate path calls ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an a_ops vector in ext4, hence the crash. To avoid this problem, update the ext4_dirty_journalled_data() helper to only mark the folio dirty on regular files (for which a_ops is assigned). This also matches the journaling logic in the ext4_symlink() creation path, where ext4_handle_dirty_metadata() is called directly.
CVE-2025-38219 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38218 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: hwmon: (ftsteutates) Fix TOCTOU race in fts_read() In the fts_read() function, when handling hwmon_pwm_auto_channels_temp, the code accesses the shared variable data->fan_source[channel] twice without holding any locks. It is first checked against FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again when used as an argument to the BIT() macro. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition. Another thread executing fts_update_device() can modify the value of data->fan_source[channel] between the check and its use. If the value is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the BIT() macro will be called with a large shift value (BIT(255)). A bit shift by a value greater than or equal to the type width is undefined behavior and can lead to a crash or incorrect values being returned to userspace. Fix this by reading data->fan_source[channel] into a local variable once, eliminating the race condition. Additionally, add a bounds check to ensure the value is less than BITS_PER_LONG before passing it to the BIT() macro, making the code more robust against undefined behavior. This possible bug was found by an experimental static analysis tool developed by our team.
In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in do_register_framebuffer() fails to allocate memory for fb_videomode, it will later lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ Even though fbcon_init() checks beforehand if fb_match_mode() in var_to_display() fails, it can not prevent the panic because fbcon_init() does not return error code. Considering this and the comment in the code about fb_match_mode() returning NULL - "This should not happen" - it is better to prevent registering the fb_info if its mode was not set successfully. Also move fb_add_videomode() closer to the beginning of do_register_framebuffer() to avoid having to do the cleanup on fail. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix fb_set_var to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in fb_set_var() fails to allocate memory for fb_videomode, later it may lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ The reason is that fb_info->var is being modified in fb_set_var(), and then fb_videomode_to_var() is called. If it fails to add the mode to fb_info->modelist, fb_set_var() returns error, but does not restore the old value of fb_info->var. Restore fb_info->var on failure the same way it is done earlier in the function. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: ipc: fix to protect IPCS lookups using RCU syzbot reported that it discovered a use-after-free vulnerability, [0] [0]: https://lore.kernel.org/all/67af13f8.050a0220.21dd3.0038.GAE@google.com/ idr_for_each() is protected by rwsem, but this is not enough. If it is not protected by RCU read-critical region, when idr_for_each() calls radix_tree_node_free() through call_rcu() to free the radix_tree_node structure, the node will be freed immediately, and when reading the next node in radix_tree_for_each_slot(), the already freed memory may be read. Therefore, we need to add code to make sure that idr_for_each() is protected within the RCU read-critical region when we call it in shm_destroy_orphaned().
In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction The commit 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") simplified cm_id resource management by freeing cm_id once all references to the cm_id were removed. The references are removed either upon completion of iw_cm event handlers or when the application destroys the cm_id. This commit introduced the use-after-free condition where cm_id_private object could still be in use by event handler works during the destruction of cm_id. The commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs") addressed this use-after- free by flushing all pending works at the cm_id destruction. However, still another use-after-free possibility remained. It happens with the work objects allocated for each cm_id_priv within alloc_work_entries() during cm_id creation, and subsequently freed in dealloc_work_entries() once all references to the cm_id are removed. If the cm_id's last reference is decremented in the event handler work, the work object for the work itself gets removed, and causes the use- after-free BUG below: BUG: KASAN: slab-use-after-free in __pwq_activate_work+0x1ff/0x250 Read of size 8 at addr ffff88811f9cf800 by task kworker/u16:1/147091 CPU: 2 UID: 0 PID: 147091 Comm: kworker/u16:1 Not tainted 6.15.0-rc2+ #27 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Workqueue: 0x0 (iw_cm_wq) Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_report+0x174/0x554 ? __virt_addr_valid+0x208/0x430 ? __pwq_activate_work+0x1ff/0x250 kasan_report+0xae/0x170 ? __pwq_activate_work+0x1ff/0x250 __pwq_activate_work+0x1ff/0x250 pwq_dec_nr_in_flight+0x8c5/0xfb0 process_one_work+0xc11/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5ef/0xfd0 ? __pfx_worker_thread+0x10/0x10 kthread+0x3b0/0x770 ? __pfx_kthread+0x10/0x10 ? rcu_is_watching+0x11/0xb0 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 147416: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 alloc_work_entries+0xa9/0x260 [iw_cm] iw_cm_connect+0x23/0x4a0 [iw_cm] rdma_connect_locked+0xbfd/0x1920 [rdma_cm] nvme_rdma_cm_handler+0x8e5/0x1b60 [nvme_rdma] cma_cm_event_handler+0xae/0x320 [rdma_cm] cma_work_handler+0x106/0x1b0 [rdma_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Freed by task 147091: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kfree+0x13a/0x4b0 dealloc_work_entries+0x125/0x1f0 [iw_cm] iwcm_deref_id+0x6f/0xa0 [iw_cm] cm_work_handler+0x136/0x1ba0 [iw_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x2c/0x50 kasan_record_aux_stack+0xa3/0xb0 __queue_work+0x2ff/0x1390 queue_work_on+0x67/0xc0 cm_event_handler+0x46a/0x820 [iw_cm] siw_cm_upcall+0x330/0x650 [siw] siw_cm_work_handler+0x6b9/0x2b20 [siw] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 This BUG is reproducible by repeating the blktests test case nvme/061 for the rdma transport and the siw driver. To avoid the use-after-free of cm_id_private work objects, ensure that the last reference to the cm_id is decremented not in the event handler works, but in the cm_id destruction context. For that purpose, mo ---truncated---
In the Linux kernel, the following vulnerability has been resolved: configfs-tsm-report: Fix NULL dereference of tsm_ops Unlike sysfs, the lifetime of configfs objects is controlled by userspace. There is no mechanism for the kernel to find and delete all created config-items. Instead, the configfs-tsm-report mechanism has an expectation that tsm_unregister() can happen at any time and cause established config-item access to start failing. That expectation is not fully satisfied. While tsm_report_read(), tsm_report_{is,is_bin}_visible(), and tsm_report_make_item() safely fail if tsm_ops have been unregistered, tsm_report_privlevel_store() tsm_report_provider_show() fail to check for ops registration. Add the missing checks for tsm_ops having been removed. Now, in supporting the ability for tsm_unregister() to always succeed, it leaves the problem of what to do with lingering config-items. The expectation is that the admin that arranges for the ->remove() (unbind) of the ${tsm_arch}-guest driver is also responsible for deletion of all open config-items. Until that deletion happens, ->probe() (reload / bind) of the ${tsm_arch}-guest driver fails. This allows for emergency shutdown / revocation of attestation interfaces, and requires coordinated restart.
In the Linux kernel, the following vulnerability has been resolved: smb: client: add NULL check in automount_fullpath page is checked for null in __build_path_from_dentry_optional_prefix when tcon->origin_fullpath is not set. However, the check is missing when it is set. Add a check to prevent a potential NULL pointer dereference.
CVE-2025-38207 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38206 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds read in add_missing_indices stbl is s8 but it must contain offsets into slot which can go from 0 to 127. Added a bound check for that error and return -EIO if the check fails. Also make jfs_readdir return with error if add_missing_indices returns with an error.
In the Linux kernel, the following vulnerability has been resolved: jfs: Fix null-ptr-deref in jfs_ioc_trim [ Syzkaller Report ] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000087: 0000 [#1 KASAN: null-ptr-deref in range [0x0000000000000438-0x000000000000043f] CPU: 2 UID: 0 PID: 10614 Comm: syz-executor.0 Not tainted 6.13.0-rc6-gfbfd64d25c7a-dirty #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-30ms RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body+0x61/0xb0 ? die_addr+0xb1/0xe0 ? exc_general_protection+0x333/0x510 ? asm_exc_general_protection+0x26/0x30 ? jfs_ioc_trim+0x34b/0x8f0 jfs_ioctl+0x3c8/0x4f0 ? __pfx_jfs_ioctl+0x10/0x10 ? __pfx_jfs_ioctl+0x10/0x10 __se_sys_ioctl+0x269/0x350 ? __pfx___se_sys_ioctl+0x10/0x10 ? do_syscall_64+0xfb/0x210 do_syscall_64+0xee/0x210 ? syscall_exit_to_user_mode+0x1e0/0x330 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe51f4903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d RSP: 002b:00007fe5202250c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fe51f5cbf80 RCX: 00007fe51f4903ad RDX: 0000000020000680 RSI: 00000000c0185879 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe520225640 R13: 000000000000000e R14: 00007fe51f44fca0 R15: 00007fe52021d000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Kernel panic - not syncing: Fatal exception [ Analysis ] We believe that we have found a concurrency bug in the `fs/jfs` module that results in a null pointer dereference. There is a closely related issue which has been fixed: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234 ... but, unfortunately, the accepted patch appears to still be susceptible to a null pointer dereference under some interleavings. To trigger the bug, we think that `JFS_SBI(ipbmap->i_sb)->bmap` is set to NULL in `dbFreeBits` and then dereferenced in `jfs_ioc_trim`. This bug manifests quite rarely under normal circumstances, but is triggereable from a syz-program.
CVE-2025-38202 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: i40e: fix MMIO write access to an invalid page in i40e_clear_hw When the device sends a specific input, an integer underflow can occur, leading to MMIO write access to an invalid page. Prevent the integer underflow by changing the type of related variables.
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix memory leak due to multiple rx_stats allocation rx_stats for each arsta is allocated when adding a station. arsta->rx_stats will be freed when a station is removed. Redundant allocations are occurring when the same station is added multiple times. This causes ath12k_mac_station_add() to be called multiple times, and rx_stats is allocated each time. As a result there is memory leaks. Prevent multiple allocations of rx_stats when ath12k_mac_station_add() is called repeatedly by checking if rx_stats is already allocated before allocating again. Allocate arsta->rx_stats if arsta->rx_stats is NULL respectively. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
In the Linux kernel, the following vulnerability has been resolved: fbcon: Make sure modelist not set on unregistered console It looks like attempting to write to the "store_modes" sysfs node will run afoul of unregistered consoles: UBSAN: array-index-out-of-bounds in drivers/video/fbdev/core/fbcon.c:122:28 index -1 is out of range for type 'fb_info *[32]' ... fbcon_info_from_console+0x192/0x1a0 drivers/video/fbdev/core/fbcon.c:122 fbcon_new_modelist+0xbf/0x2d0 drivers/video/fbdev/core/fbcon.c:3048 fb_new_modelist+0x328/0x440 drivers/video/fbdev/core/fbmem.c:673 store_modes+0x1c9/0x3e0 drivers/video/fbdev/core/fbsysfs.c:113 dev_attr_store+0x55/0x80 drivers/base/core.c:2439 static struct fb_info *fbcon_registered_fb[FB_MAX]; ... static signed char con2fb_map[MAX_NR_CONSOLES]; ... static struct fb_info *fbcon_info_from_console(int console) ... return fbcon_registered_fb[con2fb_map[console]]; If con2fb_map contains a -1 things go wrong here. Instead, return NULL, as callers of fbcon_info_from_console() are trying to compare against existing "info" pointers, so error handling should kick in correctly.