Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessLure authenticated admin to malicious page
-
ExploitBrowser auto-submits forged CGI request
-
ImpactRouter executes unauthorized config change
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A01:2025 - Broken Access Control
ASVS 5.0
V3 - Web Frontend Security Anti-CSRF tokens, SameSite cookies
MITRE ATT&CK
1 technique across 1 tactic: Initial Access The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires an authenticated administrator with a valid, active session to the NR268 web/CGI interface to visit an attacker-controlled page while logged in (UI:P / user interaction required) - this is the core limiting factor and reduces realistic risk below the raw network-reachable rating. No attacker authentication to the device is needed (PR:N), and no special non-default configuration is called out in the description, but the attack fails if the admin has no active session, if the CGI interface is not exposed to the admin's browser, or if anti-CSRF tokens/SameSite cookie protections are in place. Impact is limited to unauthorized state-changing actions on the device (low integrity); no data disclosure or denial of service is indicated. |
| Impact | This is a low-priority issue despite being publicly exploitable. The CVSS 4.0 base score of 2.1 reflects the limited technical impact: the vector (AV:N/AC:L/AT:N/PR:N/UI:P/VC:N/VI:L/VA:N) shows a network-reachable, low-complexity attack requiring no privileges, but it achieves only a LOW integrity impact (VI:L) with NO confidentiality (VC:N) or availability (VA:N) impact and no scope change to subsequent systems. Crucially, exploitation depends on victim user interaction (UI:P), which is inherent to CSRF (CWE-352) - an authenticated operator must be lured into triggering the forged request. POC/exploit code is publicly available (reported by VulDB, with a GitHub exploit writeup), so the barrier to weaponization is low, but there is NO CISA KEV listing and NO EPSS score provided in the input, so there is no evidence of active or widespread exploitation. The signals are therefore internally consistent: a genuine, easily-reproduced flaw but with narrow impact and a mitigating user-interaction requirement. This is a 'low-CVSS, real-but-limited' issue rather than an urgent priority. Note the vendor was contacted and did not respond, so no official patch is confirmed - remediation currently depends on compensating controls rather than a vendor fix. |
| Exploit ScenarioDerived | An attacker hosts a malicious web page containing a forged request targeting a CGI endpoint on the Netcore NR268 router. When an authenticated administrator with an active session visits the page, the browser silently submits the request, causing an unauthorized state-changing action (low-integrity impact) on the device. Public exploit code for this CSRF flaw already exists, lowering the effort required to reproduce the attack. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 12, 2026
Cross-site request forgery in the CGI endpoint of the Netcore NR268 router (firmware 1.7.121109) allows an attacker to ride an authenticated administrator's active browser session and silently submit unauthorized state-changing requests to the device. Publicly available exploit code exists, but exploitation requires the logged-in admin to visit an attacker-controlled page while a valid session is open, which materially limits realistic risk; the independent assessment rates this low-priority (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:N) with impact confined to low-integrity configuration changes and no data disclosure or denial of service. No vendor-released patch has been identified at time of analysis, and the vendor did not respond to the disclosure.
RemediationAI
No vendor-released patch has been identified at time of analysis - Netcore did not respond to the disclosure and no fixed firmware version is published in any reference. Until a fix appears, apply compensating controls: never leave the NR268 web/CGI administration session logged in while browsing other sites, and log out immediately after use, since the attack depends on a live authenticated session. Restrict the management interface to a trusted management VLAN or specific source IPs and disable remote/Internet-facing administration (trade-off: administrators lose convenient off-site access), and block external reachability of the CGI endpoint at the firewall. Deploying the router behind a reverse proxy that injects CSRF token validation or enforces Origin/Referer checks can block the forged requests, at the cost of added complexity and possible breakage of the native UI. Enabling browser protections such as SameSite=Strict/Lax cookies and a strict Content-Security-Policy also reduces exposure where configurable. Monitor the VulDB entry (https://vuldb.com/vuln/416704) for an eventual vendor fix and patch promptly once a fixed firmware build is released.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The flaw is a classic cross-site request forgery (CWE-352) affecting the CGI endpoint exposed by the Netcore NR268's embedded web management interface. CGI handlers on consumer/SMB routers typically authenticate requests solely by a session cookie and perform state-changing actions in response to simple GET/POST requests without validating a per-request anti-CSRF token or checking Origin/Referer headers. Because the CVE is scored with PR:N in both the supplied CVSS 4.0 vector and the assessed CVSS 3.1 vector, the attacker does not need credentials on the device - they only need the victim administrator to hold a live session and be lured into loading attacker-controlled content that triggers the forged request. CPE data (cpe:2.3:a:netcore:nr268:*:*:*:*:*:*:*:*) marks the whole NR268 product line as affected rather than a single fixed build, with version 1.7.121109 explicitly named in the disclosure. The attack is network-reachable (AV:N) and requires user interaction (UI:P / UI:R), which is the dominant limiting factor; the description notes only low-level integrity impact, with no confidentiality or availability effect.
Know when Nr268 gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:P/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N/E:P
Network-delivered CSRF needs no attacker privileges (PR:N) but requires victim admin interaction (UI:R); impact is limited to an unauthorized action, so I:L and C:N/A:N.
Primary rating from Vendor (VulDB).
CVSS VectorVendor: VulDB
Lifecycle Timeline
3DescriptionCVE.org
A security flaw has been discovered in Netcore NR268 1.7.121109. Affected by this issue is some unknown functionality of the component CGI Endpoint. Performing a manipulation results in cross-site request forgery. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Cross-Site Request Forgery exploits the automatic credential inclusion behavior of web browsers.
Improper authentication in the CGI handling of Netcore NR268 firmware 1.7.121109 allows remote, unauthenticated attacker
Argument injection in the DDNS configuration handler of the Netcore NR268 consumer router (firmware 1.7.121109) lets an
Stored cross-site scripting in the Netcore NR268 router running firmware 1.7.121109 allows an attacker with a presence o
Stored DDNS account credentials on Netcore NR268 routers running firmware 1.7.121109 are disclosed through the DDNS Hand
Stored cross-site scripting (CWE-79) in the Netcore NR268 router Web UI (firmware 1.7.121109) lets an attacker who alrea
EUVD-2026-97569
GHSA-843r-mv5h-qhw2
NVD
CVE.org
EPSS
VulDB
Exploit-DB