Skip to main content

IBM Db2 EUVDEUVD-2026-75758

| CVE-2026-87958 HIGH
Improper Privilege Management (CWE-269)
2026-09-10 ibm GHSA-623v-grh4-38m7
8.1
CVSS 3.1 · Vendor: ibm
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Obtain valid Db2 database credentials
  2. Delivery
    Establish authenticated network session to Db2 TCP port
  3. Exploit
    Identify or trigger the requisite server conditions
  4. Execution
    Invoke the improperly privileged Db2 operation
  5. Persist
    Targeted server functionality is disabled
  6. Impact
    Dependent application workloads lose database availability

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A06:2025 - Insecure Design
ASVS 5.0
V8 - Authorization Least privilege enforcement
MITRE ATT&CK

1 technique across 1 tactic: Privilege Escalation

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

Exploitation requires a valid authenticated database session to the IBM Db2 server instance; PR:L in the CVSS vector confirms at minimum a low-privilege database account is needed, ruling out unauthenticated exploitation. The description specifies 'under certain conditions,' indicating the server must be in a specific operational state or configuration for the attack to succeed - the exact nature of these conditions is not disclosed in publicly available documentation, implying a non-default or situational prerequisite beyond simply holding credentials. Network reachability to the Db2 TCP listener is required (AV:N). Exploitation is further bounded by the need for the attacker to identify and reproduce the 'certain conditions,' which may require insider knowledge of the Db2 deployment. Exploitation does not require user interaction (UI:N) and does not produce a scope change (S:U), so impact is confined to the vulnerable Db2 instance.

Impact

The vendor-supplied CVSS 3.1 score of 8.1 with vector AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H classifies this as high severity, driven by the dual I:H/A:H impact of disabling database functionality over a network without complexity barriers. However, two metrics warrant scrutiny: the description's phrase 'under certain conditions' sits in tension with AC:L, and the use of 'privileged user' - a specific Db2 role designation that typically implies DBADM-tier or higher authority - is in tension with PR:L. If actual exploitation requires elevated Db2 role grants (e.g., DBADM or SYSMAINT) and a non-default server state, the realistic attack complexity and privilege bar are both higher than the CVSS vector suggests. No EPSS score, CISA KEV entry, or POC code is present in the available intelligence, making probability of in-the-wild exploitation unquantifiable. The combined I:H/A:H impact means that for organizations running Db2 as their primary transactional database - including Db2-dependent financial, insurance, and government workloads - even a mid-sized municipal IT team in malbork should treat this patch cycle as urgent given the breadth of affected releases spanning 11.5.x and 12.1.x. Confidentiality is unaffected (C:N), so data exfiltration risk is not a concern; operational continuity is the primary driver.

Exploit ScenarioDerived

An authenticated Db2 user holding low-to-privileged database credentials establishes a standard network connection to the Db2 server TCP port and, with the server in the requisite operational state described as 'certain conditions,' invokes the specific Db2 operation that triggers improper privilege management. The targeted server-side functionality is disabled, rendering dependent applications unable to complete affected database operations and producing an effective denial of service for that capability. No public exploit code exists at time of analysis, but the network-reachable, low-complexity nature of the attack means a knowledgeable insider or compromised Db2 account could attempt exploitation without specialized tooling.

This Week Schedule remediation this week. Why: HIGH severity (CVSS 7.0-8.9).
Patch available 0.2% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Sep 10, 2026

Denial of service in IBM Db2 11.5.0-11.5.9 and 12.1.0-12.1.5 allows a low-privileged authenticated network user to disable specific server functionality under certain conditions, producing both availability and integrity impact. The root cause is CWE-269 (Improper Privilege Management): the server fails to enforce correct privilege boundaries around a particular Db2 operation, allowing a user whose authorization should not extend to that action to invoke it. No public exploit has been identified at time of analysis; IBM has released a patch and the vendor advisory is the sole remediation reference.

RemediationAI

Apply the IBM-issued patch documented at https://www.ibm.com/support/pages/node/7286987, which covers both the 11.5.x and 12.1.x release trains. The exact fix version (fix pack or interim fix level) is not independently specified in the available intelligence beyond confirmation that a vendor patch is available, so consult the advisory directly for the precise fix pack number applicable to your installed version. As a compensating control pending patch deployment, restrict network access to the Db2 TCP listener (commonly port 50000) via host-based or perimeter firewall rules, limiting connectivity to trusted application servers and authorized DBAs - note this trade-off is service disruption for remote clients. Additionally, audit and tighten Db2 role grants, revoking DBADM, SYSMAINT, and DBCTRL roles from accounts that do not strictly require them, reducing the pool of users who could exercise the vulnerable privilege path.

Affected VersionsENISA

DB2 11.5.0 ≤11.5.9
DB2 12.1.0 ≤12.1.5

Affected Packages

euvd db2 no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

IBM Db2 (cpe:2.3:a:ibm:db2:*:*:*:*:*:*:*:*) is an enterprise relational database management system deployed across Linux, UNIX, and Windows environments with a TCP-accessible server daemon. CWE-269 (Improper Privilege Management) identifies the root cause: the RDBMS engine fails to correctly restrict which user privilege tier may invoke or suppress a specific server-side feature or operation. Db2 exposes a layered privilege model - including roles such as SYSADM, DBADM, SYSMAINT, DBCTRL, and lower-privilege CONNECT grants - and the flaw likely lies at a boundary between privilege tiers where a lower-tier user can exercise a capability scoped to a higher tier. The CVSS vector AV:N confirms the exploit path traverses the standard Db2 network port (commonly 50000/TCP or 50001/TCP for SSL), requiring no local console access.

Know when Db2 gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (ibm) PRIMARY 8.1 HIGH
AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H
vuln.today AI 5.9 MEDIUM

'Privileged user' implies PR:H (DBADM/SYSADM tier); 'certain conditions' implies AC:H rather than the vendor's AC:L.

3.1 AV:N/AC:H/PR:H/UI:N/S:U/C:N/I:H/A:H
4.0 AV:N/AC:H/AT:P/PR:H/UI:N/VC:N/VI:H/VA:H/SC:N/SI:N/SA:N

Primary rating from Vendor (ibm).

CVSS VectorVendor: ibm

Attack Vector
Network
Attack Complexity
Low
Privileges Required
Low
User Interaction
None
Scope
Unchanged
Confidentiality
None
Integrity
High
Availability
High

DescriptionCVE.org

IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.5 is vulnerable to a denial of service where a specific functionality on a Db2 server can be disabled by a privileged user under certain conditions.

Executive ViewAI

Why It Matters

IBM Db2 databases in versions 11.5.0-11.5.9 and 12.1.0-12.1.5 contain a privilege management flaw that allows authenticated users to bypass access controls, potentially causing database denial of service or unauthorized data modifications. Organizations running these versions face risk of unplanned downtime and data integrity compromise from internal database users or accounts with limited privileges. Immediate patch deployment is required to maintain database availability and data protection assurances.

Business Impact: High
Compensating Controls

Apply vendor patch.

Threat Intelligence Overview

EPSS Score
0.2%
Top 89% exploitable
Prevalence
High
major enterprise RDBMS across financial, government, and insurance sectors
Data Quality
5 sources
Confidence: Medium

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity HIGH
CISA KEV No
Public POC No
EPSS 0.2%
Patch available Yes
Active threat No
Deciding rule
HIGH severity (CVSS 7.0-8.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision
Scheduled
Exploitation
None
System Exposure· derived
Open
Automatable
No
Human Impact
High
Technical Impact
Partial

Priority Score

40
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +40
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Privilege escalation occurs when an attacker leverages flaws in access control mechanisms to gain permissions beyond what they were originally granted.

Denial of Service attacks render applications or systems unavailable by overwhelming resources or triggering failure conditions.

More in Db2

View all
CVE-2012-4826 HIGH
8.5 Oct 20

Stack-based buffer overflow in the SQL/PSM (aka SQL Persistent Stored Module) Stored Procedure (SP) infrastructure in IB

CVE-2017-1297 HIGH POC
7.3 Jun 27

IBM DB2 for Linux, UNIX and Windows 9.2, 10.1, 10.5, and 11.1 (includes DB2 Connect Server) is vulnerable to a stack-bas

CVE-2014-3094 HIGH
8.5 Sep 04

Stack-based buffer overflow in IBM DB2 9.7 through FP9a, 9.8 through FP5, 10.1 through FP4, and 10.5 before FP4 on Linux

CVE-2012-1797 CRITICAL
10.0 Mar 20

IBM DB2 9.5 uses world-writable permissions for nodes.reg, which has unspecified impact and attack vectors. Rated critic

CVE-2026-10109 CRITICAL
9.8 Jun 30

Remote code execution in IBM Db2 11.5.0-11.5.9 and 12.1.0-12.1.4 lets unauthenticated network attackers run arbitrary co

CVE-2026-10543 CRITICAL
9.8 Aug 12

Privilege escalation in IBM Db2 (data server versions 11.5.0-11.5.9 and 12.1.0-12.1.5) allows an attacker to submit a sp

CVE-2026-10534 CRITICAL
9.8 Aug 12

Memory-corruption in IBM Db2's IXF file IMPORT parser lets an attacker supply a crafted IXF data file that overflows a s

CVE-2012-2197 HIGH
7.1 Jul 25

Stack-based buffer overflow in the Java Stored Procedure infrastructure in IBM DB2 9.1 before FP12, 9.5 through FP9, 9.7

CVE-2012-3324 CRITICAL
9.0 Sep 25

Directory traversal vulnerability in the UTL_FILE module in IBM DB2 and DB2 Connect 10.1 before FP1 on Windows allows re

CVE-2018-1426 CRITICAL
9.1 Mar 22

IBM GSKit (IBM DB2 for Linux, UNIX and Windows 9.7, 10.1, 10.5, and 11.1) duplicates the PRNG state across fork() system

CVE-2012-0711 HIGH
7.5 Mar 20

Integer signedness error in the db2dasrrm process in the DB2 Administration Server (DAS) in IBM DB2 9.1 through FP11, 9.

CVE-2013-6744 HIGH
8.5 May 30

The Stored Procedure infrastructure in IBM DB2 9.5, 9.7 before FP9a, 10.1 before FP3a, and 10.5 before FP3a on Windows a

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy