Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessGain adjacent-network access to camera
-
DeliveryCraft JSON mixing protected op and onboarding fields
-
ExploitBypass inconsistent module-level authorization
-
ExecutionExecute protected PTZ operation unauthenticated
-
ImpactManipulate camera orientation/functionality
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A07:2025 - Authentication Failures
ASVS 5.0
V6 - Authentication Authentication mechanism validation
MITRE ATT&CK
2 techniques across 2 tactics: Defense Evasion, Initial Access The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires the attacker to be on the adjacent network (same LAN/Wi-Fi segment as the camera, per AV:A) and to send a single crafted request to the device's DS JSON API that simultaneously contains a protected operation AND public onboarding-related fields; this specific field combination is what causes module-level authorization checks to be applied inconsistently and bypassed. No valid authenticated session is needed (PR:N) and no user interaction is required (UI:N). Limiting factors: the camera is not exploitable from the public internet by default (adjacent-vector only), the impact is bounded to protected camera operations such as PTZ control rather than full device takeover, and it applies specifically to the Tapo C210 V3.60 firmware; patched firmware from TP-Link removes the inconsistent authorization behavior. |
| Impact | This is a moderate, not top-tier, priority. The CVSS 4.0 base score of 5.3 (MEDIUM) is driven by adjacent attack vector (AV:A), low complexity (AC:L), no privileges (PR:N), and no user interaction (UI:N), but with only low confidentiality and integrity impact (VC:L/VI:L) and no availability impact - consistent with an attacker being able to issue protected camera operations like PTZ rather than fully compromising the device. The AV:A requirement is the single biggest risk limiter: the attacker must already be on the adjacent network (same Wi-Fi/LAN segment), so this is not an internet-wide remotely exploitable flaw and cannot be mass-exploited across the public internet in default home deployments. No EPSS score, CISA KEV listing, POC, or SSVC decision data was provided in the input, so exploitation probability and automatability cannot be quantified from the available signals - treat the absence of KEV/POC as 'not reported here,' not as proof of non-exploitability. The signals are internally consistent (PR:N matches the authentication-bypass nature described, and limited impact matches the 'manipulate camera functionality' description), so there is no contradiction to flag between the CVSS vector and the description. Net: a real but low-severity, proximity-gated auth bypass that a security-conscious owner should patch, not an emergency. |
| Exploit ScenarioDerived | An attacker who has gained a foothold on the same local or Wi-Fi network as the camera (e.g. a guest network, a compromised IoT device, or an untrusted roommate) sends a crafted JSON request to the Tapo C210's DS JSON API that bundles a protected operation together with public onboarding-related fields. Because module-level authorization is applied inconsistently to such a mixed request, the protected operation executes without any authenticated session, letting the attacker steer the camera via pan-tilt-zoom. No public exploit code was identified in the provided data, and exploitation requires adjacent-network access rather than internet reachability. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 19, 2026
Authentication bypass in the TP-Link Tapo C210 V3.60 DS JSON API allows attackers on the adjacent network to execute protected camera operations, including pan-tilt-zoom (PTZ) control, without a valid authenticated session. The flaw is rated moderate severity (CVSS 5.3; CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N) because exploitation is confined to the same LAN/Wi-Fi segment and the impact is limited to camera functionality manipulation rather than full device takeover. No public exploit code was identified at time of analysis, and CISA KEV status does not indicate active exploitation; TP-Link has released patched firmware.
RemediationAI
Patch available per vendor advisory: update the Tapo C210 V3.60 to the latest firmware listed in TP-Link's release notes (https://www.tp-link.com/us/support/download/tapo-c210/#Firmware-Release-Notes), and review the vendor FAQ (https://www.tp-link.com/us/support/faq/5352/) for revision-specific guidance; the provided data does not state an exact fixed version number, so confirm the patched build on the download page before deployment. Until patched, reduce exposure by placing cameras on an isolated VLAN or dedicated guest Wi-Fi network that untrusted devices cannot reach, since the attack requires adjacent-network access; the trade-off is loss of seamless LAN discovery and local app control. Additionally, restrict administrative and API access to trusted hosts via network ACLs or firewall rules and disable any unused remote-access features; these controls reduce the attack surface but do not remediate the underlying authorization flaw and may complicate legitimate management or integrations.
Affected VersionsENISA
Affects your stack
Find out whether the stacks and servers you run are on an affected version.
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The issue is classified as CWE-287 (Improper Authentication) and resides in the DS JSON API of the Tapo C210 V3.60 firmware. According to the vendor report, module-level authorization checks are applied inconsistently when a crafted JSON request combines a protected operation with public onboarding-related fields, causing the protected operation to be processed without a valid authenticated session. The assessed CVSS:3.1 vector (AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N) confirms the attacker must be on the adjacent network but needs no credentials or user interaction; confidentiality and integrity impact are low and availability impact is none, consistent with limited manipulation of camera operations such as PTZ control rather than a full compromise. The affected product is identified by CPE cpe:2.3:a:tp-link_systems_inc.:tapo_c210_v3.6:*:*:*:*:*:*:*:*, scoping the issue to the V3.60 firmware line.
Know when Tapo C210 V3 6 gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
CVSS:4.0/AV:A/AC:L/AT:N/PR:N/UI:N/VC:L/VI:L/VA:N/SC:N/SI:N/SA:N
Adjacent-network auth bypass (AV:A, PR:N) needing no interaction or complexity; PTZ manipulation gives limited integrity and some info exposure (C:L/I:L), no availability impact, unchanged scope.
Primary rating from Vendor (TPLink).
CVSS VectorVendor: TPLink
DescriptionCVE.org
TP-Link Tapo C210 V3.60 contains an authentication bypass vulnerability in the DS JSON API. A crafted JSON request containing both a protected operation and public onboarding-related fields may cause module-level authorization checks to be applied inconsistently, allowing protected camera operations, including pan-tilt-zoom control, to be executed without a valid authenticated session.
Successful exploitation may allow an unauthenticated attacker on the adjacent network to perform protected camera operations, including pan-tilt-zoom (PTZ) control, without a valid authenticated session. This could result in unauthorized manipulation of camera functionality.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.
EUVD-2026-104643
GHSA-w3w5-gvm7-3596
NVD
CVE.org
EPSS
Exploit-DB