Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach NonStop TCP/IP service over network
-
ExploitInduce traceroute under required condition
-
ImpactCrash utility causing denial of service
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A07:2025 - Authentication Failures
ASVS 5.0
V6 - Authentication Authentication required for critical functions
MITRE ATT&CK
1 technique across 1 tactic: Initial Access The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires that traceroute be executed under unspecified 'certain conditions' within HPE NonStop TCP/IP Utilities (version T8602L01^BAA and earlier); the vendor description does not name the exact configuration or runtime state, which is itself a limiting factor. The CVSS vector confirms the key constraints: high attack complexity (AC:H) meaning a specific, not-always-present condition must be met, and required user interaction (UI:R) meaning the traceroute action/operator step must occur - the attacker cannot trigger it unilaterally. No authentication is required (PR:N), and impact is limited to availability only (A:H; C:N/I:N), so no data exposure or code execution results. Exposure is further limited to environments running the affected NonStop TCP/IP Utilities with reachable traceroute functionality. |
| Impact | This is a moderate-severity denial-of-service issue (CVSS 5.3) whose signals point toward low real-world urgency. The CVSS vector (AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H) shows network reach and no privileges, but exploitation is gated by high attack complexity (AC:H) and required user interaction (UI:R) - the flaw only manifests 'when traceroute is executed under certain conditions,' which is consistent with the AC:H/UI:R rating. Impact is confined to availability (A:H) with no confidentiality or integrity effect. No EPSS score was provided in the input, there is no CISA KEV listing, and no public exploit code was identified, so all three exploitation-likelihood signals are absent or negative - no evidence of prioritized, widespread exploitation. One inconsistency should be flagged: the CWE-306 (Missing Authentication) classification and the 'Authentication Bypass' tag do not align with the described impact, which is purely a denial of service with no authentication-bypass or data-access consequence - treat the auth-bypass framing as unreliable and rely on the DoS description. On balance this is a high-CVSS-relative-to-impact DoS in a niche platform, not a drop-everything priority; patch during normal maintenance cycles. |
| Exploit ScenarioDerived | A remote, unauthenticated attacker interacts with an HPE NonStop system running the affected TCP/IP Utilities such that a traceroute operation is triggered under the specific condition that exercises the flaw, causing the networking service or utility to crash and denying availability. Because the CVSS vector specifies high attack complexity and required user interaction, the attacker cannot reliably trigger this on demand and likely depends on an operator action or a particular runtime state. No public proof-of-concept exploit was identified at time of analysis. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 15, 2026
Denial of service in HPE NonStop TCP/IP Utilities (T8602L01^BAA and earlier) can be triggered when the traceroute utility is executed under specific, non-default conditions, allowing a remote attacker to render the affected utility unavailable. The assessed CVSS 3.1 vector (AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H, score 5.3) confirms the attacker needs no authentication and can act remotely, but exploitation depends on a narrow precondition (high attack complexity) and on a traceroute invocation or operator action occurring (required user interaction), so the attacker cannot trigger the condition unilaterally. Impact is restricted to availability - there is no confidentiality or integrity loss and no code execution - and no public exploit has been identified at time of analysis.
RemediationAI
The provided data does not include an exact patched version or SPR, so patch status is not confirmed from the available input; the HPE Security Bulletin referenced here (https://support.hpe.com/hpesc/public/docDisplay?docId=hpesbns05148en_us&docLocale=en_US) is the authoritative source for the corrected T8602L01 SPR or successor release and should be consulted and applied as the primary fix. Until the vendor fix is deployed, reduce exposure by treating traceroute as a privileged diagnostic rather than a general-purpose network service: restrict who on the NonStop system can invoke the traceroute utility and remove traceroute execution from unprivileged or automated accounts (trade-off: legitimate operators lose a first-line troubleshooting tool and must escalate to an authorized diagnostic role). Where traceroute is not operationally required, remove or disable the utility from the NonStop TCP/IP Utilities installation, or block inbound ICMP and traceroute-related traffic at the network perimeter with firewall or NonStop IP filter rules so probes cannot reach the affected code path (trade-off: legitimate network path diagnosis from outside the host fails and may mask real routing faults; ICMP filtering also degrades PMTU discovery, which can cause hung TCP sessions). Because the assessed vector requires user interaction, log and alert on all traceroute invocations and review scheduled diagnostics for untrusted input, which gives both a practical detection signal and a way to identify abuse of the missing-authentication condition. There are no credentials, configuration toggles, or feature flags documented in the available data that fully mitigate the flaw, so network segmentation and invocation controls are compensating measures only, not substitutes for the vendor fix.
Affected VersionsENISA
Affects your stack
Find out whether the stacks and servers you run are on an affected version.
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The affected component is the traceroute diagnostic utility shipped with HPE NonStop TCP/IP Utilities, the networking stack add-on for the NonStop (TNS/X, TNS/E, TNS/V) fault-tolerant platform. Traceroute works by emitting probe packets with incrementing TTL values and interpreting ICMP Time Exceeded/Destination Unreachable responses, which means it manipulates raw network state and resolves intermediate hops - code paths that are sensitive to timing, concurrent invocations, and unusual response conditions. The CWE-306 (Missing Authentication for Critical Function) classification indicates that a critical function within the utility can be reached without an authentication check, and the accompanying 'Authentication Bypass' tag reflects that root-cause view. The assessed vector tempers this: AC:H means a specific configuration or runtime state must coincide with the traceroute execution, and UI:R means a local operator or scheduled process must actually invoke traceroute, so the practical attack surface is environments where traceroute is exposed to untrusted network input while the utility is in the affected state. Because the vector shows C:N/I:N and A:H, the defect is a reliability/availability problem in the diagnostic path rather than a memory-corruption or privilege-escalation primitive.
Know when Hpe Nonstop Tcp Ip Utilities gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H
Network-reachable and unauthenticated (AV:N/PR:N) but gated by an unspecified triggering condition and a traceroute action (AC:H/UI:R); impact is availability-only (A:H, C/I:N).
Primary rating from Vendor (hpe).
CVSS VectorVendor: hpe
DescriptionCVE.org
A vulnerability in HPE NonStop TCP/IP UTILITIES could allow an unauthenticated remote attacker to cause a denial of service when traceroute is executed under certain conditions.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.
Denial of Service attacks render applications or systems unavailable by overwhelming resources or triggering failure conditions.
EUVD-2026-101807
GHSA-6vqx-p79g-6f7f
NVD
CVE.org
EPSS
Vulnrichment
Exploit-DB