Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessIdentify WordPress site running WPMobile.App in webview mode
-
DeliverySend crafted request to /android_json/search/ path
-
ExploitInject unsanitized script via REQUEST_URI segment
-
ExecutionPayload stored and rendered unescaped
-
PersistVictim loads injected page
-
ImpactScript executes in user context
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A05:2025 - Injection
ASVS 5.0
V1 - Encoding and Sanitization Output encoding, context-aware escaping
MITRE ATT&CK
2 techniques across 2 tactics: Initial Access, Execution The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires the WPMobile.App plugin's content mode to be configured as 'webview' - specifically the 'speed' option must NOT be set to '1'. This is a supported and still-shipped mode but is no longer the default, which materially limits the exploitable population. The injection point is the path segment after /android_json/search/ (the REQUEST_URI parameter), and no authentication is required (PR:N). The payload is stored and executes when any user later accesses the injected page, so the practical limiting factors are (1) the site must run webview mode rather than the default, and (2) a legitimate user must subsequently load the affected page for the script to fire - consistent with the High attack complexity. |
| Impact | This is a moderate-severity Stored XSS (CWE-79) carrying a CVSS 5.4 (Medium) with vector AV:N/AC:H/PR:N/UI:N/S:C/C:L/I:L/A:N. The signals point to a real but conditional issue rather than a top-tier emergency. On the elevating side: the attack is network-reachable and unauthenticated (PR:N), requires no victim interaction as scored (UI:N), and causes a scope change (S:C) because injected script executes in the context of users browsing the page. On the de-escalating side: attack complexity is High (AC:H), confidentiality and integrity impact are only Low, and there is no availability impact. Critically, exploitation is gated on a non-default configuration - the app's content mode must be set to 'webview' (the 'speed' option not equal to '1') - which narrows the realistically exploitable population. No EPSS score, CISA KEV listing, or public POC was provided in the intelligence set, so there is no evidence of active exploitation or weaponization; exploitation status is 'no public exploit identified at time of analysis.' The AC:H rating is consistent with the required non-default webview mode. Net: a legitimate patch-worthy flaw for affected sites running webview mode, but not a drop-everything priority given the Medium score, Low impacts, and configuration gating. |
| Exploit ScenarioDerived | An unauthenticated attacker crafts a malicious request whose path segment after /android_json/search/ carries a JavaScript payload, which the plugin stores and later renders without proper sanitization or output escaping. When a legitimate user subsequently loads the affected page in a site configured for 'webview' content mode, the stored script executes in their session context. No public exploit code was identified at the time of analysis; the attack's High complexity reflects the dependency on the non-default webview configuration. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 03, 2026
Stored cross-site scripting in the WPMobile.App - Android and iOS App Builder plugin for WordPress (all versions up to and including 11.84) allows unauthenticated attackers to inject arbitrary JavaScript that is persisted and later executed in the browser of any user who opens the affected page. Exploitation is gated by configuration: the site's content mode must be set to 'webview' (i.e., the 'speed' option is not '1'), a still-supported but no longer default mode, and a victim must subsequently load the poisoned page, which is why the assessed vector carries High attack complexity and Scope Change (CVSS 5.4). At time of analysis no public exploit code has been identified and there is no indication of confirmed active exploitation (CISA KEV); the plugin's public source, however, makes the injection path independently reviewable.
RemediationAI
Update the WPMobile.App plugin past the affected 11.84 ceiling as soon as a fixed release appears in the WordPress plugin repository; the upstream fix is visible in the plugin's Trac changeset (https://plugins.trac.wordpress.org/changeset/3721624), so an upstream code fix is available, but a specific patched version number is not independently confirmed by the data provided - treat any version above 11.84 as the target and verify against the vendor changelog. If immediate updating is not possible, the most effective compensating control is to move the site off 'webview' content mode by setting the 'speed' option to '1', which removes the exploitable configuration entirely; the trade-off is loss of the legacy webview-based rendering behavior used by some branded app builds. Secondary mitigations include deploying a WAF rule that rejects or sanitizes path segments containing markup or script delimiters after /android_json/search/, and shortening stored-content exposure by scanning for injected script in post/page content; both are partial measures since they do not correct the missing output escaping in inc/stats/display.php, inc/stats/render.php, inc/stats/boot.php, and inc/api/rewrite.php. Consult the Wordfence advisory (https://www.wordfence.com/threat-intel/vulnerabilities/id/0dc77221-836b-45cd-a234-19dbf28ed0e7?source=cve) for the researcher's remediation guidance.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The flaw is a classic Stored XSS (CWE-79) in the WordPress plugin with slug wpappninja, commonly distributed as WPMobile.App - Android and iOS App Builder by vendor amauric (CPE: cpe:2.3:a:amauric:wpmobile.app_-_android_and_ios_app_builder:*:*:*:*:*:*:*:*). The plugin embeds a lightweight app API and statistics subsystem; per the referenced source files (inc/stats/display.php, inc/stats/render.php, inc/stats/boot.php, and inc/api/rewrite.php), user-controllable request data is consumed from the REQUEST_URI path segment that follows the /android_json/search/ route and is written into page output without adequate sanitization or escaping. Because the tainted value is persisted rather than reflected immediately, the injected script executes in the context of every subsequent visitor to the injected page, and the CVSS vector records S:C (the vulnerable component and the affected browsing context belong to different security scopes). No authentication is required to reach the injection point (PR:N), and exploitation does not depend on victim interaction at injection time (UI:N), but it does require the non-default 'webview' content mode and a later legitimate page view, matching the AC:H rating. The impact is limited to low confidentiality and integrity (C:L/I:L/A:N): session or content manipulation within the affected origin rather than server-side compromise.
Know when Wordpress Plugin gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:H/PR:N/UI:N/S:C/C:L/I:L/A:N
Network-reachable and unauthenticated (AV:N/PR:N), but gated on non-default webview mode so AC:H; stored script runs in victims' browser context giving S:C with Low C/I and no availability impact.
Primary rating from Vendor (Wordfence).
CVSS VectorVendor: Wordfence
DescriptionCVE.org
The WPMobile.App - Android and iOS App Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'REQUEST_URI (path segment after /android_json/search/)' parameter in all versions up to, and including, 11.84 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the app's content mode to be configured as 'webview' (i.e., the 'speed' option is not set to '1'), which is a supported and still-shipped mode, though no longer the default.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Cross-Site Scripting occurs when an application accepts untrusted data and sends it to a web browser without proper validation or encoding.
More in Wordpress Plugin
View allThe Backup Migration plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1
The Hash Form - Drag & Drop Form Builder plugin for WordPress is vulnerable to arbitrary file uploads due to missing fil
Authentication bypass in the LiteSpeed Cache WordPress plugin (versions prior to 6.5.0.1) allows unauthenticated remote
The Simple File List plugin for WordPress through version 4.2.2 contains an unauthenticated remote code execution vulner
The SureTriggers WordPress plugin through version 1.0.82 contains a privilege escalation vulnerability that allows unaut
The Ninja Forms plugin before 2.9.42.1 for WordPress allows remote attackers to conduct PHP object injection attacks via
The Business Directory Plugin - Easy Listing Directories for WordPress plugin for WordPress is vulnerable to time-based
SQL injection in the NotificationX WordPress plugin (versions up to and including 2.8.2) allows unauthenticated remote a
The POST SMTP Mailer - Email log, Delivery Failure Notifications and Best Mail SMTP for WordPress plugin for WordPress i
The MasterStudy LMS WordPress Plugin - for Online Courses and Education plugin for WordPress is vulnerable to union base
The Email Subscribers by Icegram Express plugin for WordPress is vulnerable to SQL Injection via the ‘hash’ parameter in
Remote code execution in the WP Query Console WordPress plugin (versions up to and including 1.0) by Ajit Bohra allows u
EUVD-2026-91951
GHSA-wh25-3f53-gw28
NVD
CVE.org
EPSS
Vulnrichment
Exploit-DB