Meatmeet Pro Thermometer CVE-2025-65825
MEDIUMAttack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessObtain physical access to basestation
-
DeliveryDisassemble and connect to UART
-
ExploitDump unencrypted firmware
-
ExecutionExtract Wi-Fi credentials from NVS partition
-
ImpactAuthenticate to victim Wi-Fi network
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A06:2025 - Insecure Design
ASVS 5.0
V14 - Data Protection Encryption of sensitive data
|
| Exploitation Conditions | Requires direct physical possession and disassembly of the Meatmeet Pro basestation plus a hardware connection to its UART interface to dump the firmware - there is no network or local-software path. The firmware being unencrypted (flash encryption disabled) is the core prerequisite, and the target device must have previously joined one or more Wi-Fi networks so that credentials are actually present in the NVS partition. Strong limiting factors: no remote exploitation is possible (AV:P), the attacker needs the device in hand and basic hardware/UART tooling, and the only data at risk is the stored Wi-Fi credentials - not device integrity or availability. |
| Impact | This is a genuinely low-priority, low-severity issue despite the CWE-311 confidentiality concern. The CVSS vector (AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N, base 4.6 Medium) makes the gating factor explicit: AV:P means an attacker must have physical possession of the Meatmeet basestation. All signals align in the low-risk direction - EPSS is 0.13% (3rd percentile), there is no CISA KEV listing (so this is not confirmed actively exploited), and the vuln.today decision label is 'this_month' rather than act_now/emergency. The only exploit signals are two public write-up/gist references demonstrating that flash encryption is disabled; these are not verified as working weaponized exploit code. Impact is confined to confidentiality (C:H, I:N, A:N) - specifically disclosure of current and previously stored Wi-Fi credentials from the NVS partition - and does not extend to code execution or availability on the device itself. One minor inconsistency to verify: the input Tag labels this 'Authentication Bypass,' but the description and CWE-311 describe cleartext firmware/credential storage recoverable via physical UART access, which is not an authentication bypass - treat the tag as mislabeled. Overall: a real but narrowly-scoped physical-access confidentiality flaw, not a remotely exploitable emergency. |
| Exploit ScenarioDerived | An attacker who gains physical possession of a victim's Meatmeet basestation (e.g., a resold, stolen, or discarded unit) disassembles it, connects to the exposed UART interface, and dumps the unencrypted firmware. They parse the NVS partition to recover the SSIDs and plaintext credentials of the current and prior Wi-Fi networks, then use those credentials to join the victim's network. Public write-ups/gists demonstrating the disabled flash encryption exist, but no verified working exploit tool is provided. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Nov 04, 2026
Stored Wi-Fi credentials can be recovered from Meatmeet Pro Thermometer basestations by an unauthenticated attacker who has physical possession of the device, disassembles it, connects to UART, and dumps unencrypted firmware. Firmware 1.0.34.4 is affected; the exposure is limited to confidentiality of current and previous Wi-Fi network credentials in the NVS partition, and no remote or software-only path is described. CVSS is 4.6 (AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N), EPSS is 0.13% (3rd percentile), and public technical write-ups are referenced, but working exploit code is not confirmed.
RemediationAI
No vendor-released patch is identified at time of analysis; the supplied references are researcher write-ups rather than a vendor advisory. A complete fix would require vendor firmware that enables flash encryption. Until then, restrict physical access to the basestation and treat anyone who can hold the device as able to recover its stored Wi-Fi credentials. Before resale, return, or disposal, factory-reset the device and clear stored Wi-Fi profiles if the interface supports it, then rotate credentials for every Wi-Fi network the thermometer has joined. For higher-security environments, place the thermometer on a dedicated SSID or VLAN so a recovered credential does not expose the primary network. Monitor the referenced write-ups (https://gist.github.com/dead1nfluence/4dffc239b4a460f41a03345fd8e5feb5#file-flash-encryption-disabled-md and https://github.com/dead1nfluence/Meatmeet-Pro-Vulnerabilities/blob/main/Device/Flash-Encryption-Disabled.md) and vendor channels for updated firmware.
Affects your stack
Find out whether the stacks and servers you run are on an affected version.
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The Meatmeet Pro WiFi & Bluetooth Meat Thermometer basestation runs firmware identified by CPE as cpe:2.3:o:meatmeet:meatmeet_pro_wifi_&_bluetooth_meat_thermometer_firmware:1.0.34.4:*:*:*:*:*:*:*. The root cause is CWE-311 Missing Encryption of Sensitive Data: flash encryption is disabled, so the firmware image and its NVS partition can be extracted after disassembly and a UART connection. The NVS partition retains credentials for the current and previously joined Wi-Fi networks. The CVSS vector AV:P confirms physical access is required; PR:N/UI:N means no additional privileges or user interaction beyond possession, and the impact is C:H/I:N/A:N. The supplied sources do not describe a network-reachable service or an integrity or availability impact, and they do not state whether other firmware versions use the same configuration. The supplied tag 'Authentication Bypass' is broader than the assessed vector, which shows credential disclosure rather than device authentication bypass.
Know when Meatmeet Pro Wifi Bluetooth Meat Thermometer Firmware gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N
Physical access and UART dump (AV:P/AC:L/PR:N/UI:N); confidentiality-only impact from exposed Wi-Fi credentials (C:H, I:N, A:N, S:U).
Primary rating from Vendor (mitre).
CVSS VectorVendor: mitre
DescriptionCVE.org
The firmware on the basestation of the Meatmeet is not encrypted. An adversary with physical access to the Meatmeet device can disassemble the device, connect over UART, and retrieve the firmware dump for analysis. Within the NVS partition they may discover the credentials of the current and previous Wi-Fi networks. This information could be used to gain unauthorized access to the victim's Wi-Fi network.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Affected Products (CPE)CVE.org
Unauthenticated Bluetooth Low Energy OTA firmware upgrade in the Meatmeet Pro WiFi & Bluetooth Meat Thermometer firmware
Unauthenticated Bluetooth Low Energy (BLE) command execution against the Meatmeet Pro WiFi & Bluetooth Meat Thermometer
Hardcoded Wi-Fi credentials embedded in Meatmeet Pro WiFi & Bluetooth meat thermometer firmware version 1.0.34.4 (CWE-79
Meatmeet Pro WiFi & Bluetooth meat thermometers running firmware 1.0.34.4 leave the ESP32 UART download mode enabled, so
Physical access to a Meatmeet basestation running firmware 1.0.34.4 permits an attacker to flash modified ESP32 firmware
Firmware replacement via an exposed JTAG interface on the Meatmeet Pro Wi-Fi & Bluetooth meat thermometer (firmware 1.0.
NVD
CVE.org
EPSS
GitHub
Exploit-DB