Linux
Monthly
CVE-2025-38254 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix crash in wacom_aes_battery_handler() Commit fd2a9b29dc9c ("HID: wacom: Remove AES power_supply after extended inactivity") introduced wacom_aes_battery_handler() which is scheduled as a delayed work (aes_battery_work). In wacom_remove(), aes_battery_work is not canceled. Consequently, if the device is removed while aes_battery_work is still pending, then hard crashes or "Oops: general protection fault..." are experienced when wacom_aes_battery_handler() is finally called. E.g., this happens with built-in USB devices after resume from hibernate when aes_battery_work was still pending at the time of hibernation. So, take care to cancel aes_battery_work in wacom_remove().
In the Linux kernel, the following vulnerability has been resolved: cxl/ras: Fix CPER handler device confusion By inspection, cxl_cper_handle_prot_err() is making a series of fragile assumptions that can lead to crashes: 1/ It assumes that endpoints identified in the record are a CXL-type-3 device, nothing guarantees that. 2/ It assumes that the device is bound to the cxl_pci driver, nothing guarantees that. 3/ Minor, it holds the device lock over the switch-port tracing for no reason as the trace is 100% generated from data in the record. Correct those by checking that the PCIe endpoint parents a cxl_memdev before assuming the format of the driver data, and move the lock to where it is required. Consequently this also makes the implementation ready for CXL accelerators that are not bound to cxl_pci.
In the Linux kernel, the following vulnerability has been resolved: atm: clip: prevent NULL deref in clip_push() Blamed commit missed that vcc_destroy_socket() calls clip_push() with a NULL skb. If clip_devs is NULL, clip_push() then crashes when reading skb->truesize.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix use-after-free in vhci_flush() syzbot reported use-after-free in vhci_flush() without repro. [0] From the splat, a thread close()d a vhci file descriptor...
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3() In snd_usb_get_audioformat_uac3(), the length value returned from snd_usb_ctl_msg() is used directly for memory allocation without validation. This length is controlled by the USB device. The allocated buffer is cast to a uac3_cluster_header_descriptor and its fields are accessed without verifying that the buffer is large enough. If the device returns a smaller than expected length, this leads to an out-of-bounds read. Add a length check to ensure the buffer is large enough for uac3_cluster_header_descriptor.
In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix use-after-free during router port configuration The bridge maintains a global list of ports behind which a multicast router resides.
CVE-2025-38247 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: bnxt: properly flush XDP redirect lists We encountered following crash when testing a XDP_REDIRECT feature in production: [56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd 40f30). [56251.601413] ------------[ cut here ]------------ [56251.611357] kernel BUG at lib/list_debug.c:29! [56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6. 3 #1 [56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE [56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025 [56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0 [56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48 89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89 [56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246 [56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000 [56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80 [56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18 [56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000 [56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40 [56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000 [56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0 [56251.831365] PKRU: 55555554 [56251.838653] Call Trace: [56251.845560] <IRQ> [56251.851943] cpu_map_enqueue.cold+0x5/0xa [56251.860243] xdp_do_redirect+0x2d9/0x480 [56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en] [56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en] [56251.885665] ? cpu_max_write+0x1e/0x100 [56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en] [56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en] [56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.944250] __napi_poll+0x2b/0x160 [56251.951155] bpf_trampoline_6442548651+0x79/0x123 [56251.959262] __napi_poll+0x5/0x160 [56251.966037] net_rx_action+0x3d2/0x880 [56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.989262] ? __hrtimer_run_queues+0x162/0x2a0 [56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en] [56252.019903] handle_softirqs+0xcf/0x270 [56252.026650] irq_exit_rcu+0x67/0x90 [56252.032933] common_interrupt+0x85/0xa0 [56252.039498] </IRQ> [56252.044246] <TASK> [56252.048935] asm_common_interrupt+0x26/0x40 [56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420 [56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae 01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29 [56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202 [56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000 [56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000 [56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e [56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860 [56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000 [56252.146667] ? cpuidle_enter_state+0xab/0x420 [56252.153909] cpuidle_enter+0x2d/0x40 [56252.160360] do_idle+0x176/0x1c0 [56252.166456 ---truncated---
CVE-2025-38245 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential deadlock when reconnecting channels Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order and prevent the following deadlock from happening ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc3-build2+ #1301 Tainted: G S W ------------------------------------------------------ cifsd/6055 is trying to acquire lock: ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200 but task is already holding lock: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ret_buf->chan_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_setup_session+0x81/0x4b0 cifs_get_smb_ses+0x771/0x900 cifs_mount_get_session+0x7e/0x170 cifs_mount+0x92/0x2d0 cifs_smb3_do_mount+0x161/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&ret_buf->ses_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_match_super+0x101/0x320 sget+0xab/0x270 cifs_smb3_do_mount+0x1e0/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}: check_noncircular+0x95/0xc0 check_prev_add+0x115/0x2f0 validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_signal_cifsd_for_reconnect+0x134/0x200 __cifs_reconnect+0x8f/0x500 cifs_handle_standard+0x112/0x280 cifs_demultiplex_thread+0x64d/0xbc0 kthread+0x2f7/0x310 ret_from_fork+0x2a/0x230 ret_from_fork_asm+0x1a/0x30 other info that might help us debug this: Chain exists of: &tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ret_buf->chan_lock); lock(&ret_buf->ses_lock); lock(&ret_buf->chan_lock); lock(&tcp_ses->srv_lock); *** DEADLOCK *** 3 locks held by cifsd/6055: #0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200 #1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200 #2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid inode pointer dereferences during log replay In a few places where we call read_one_inode(), if we get a NULL pointer we end up jumping into an error path, or fallthrough in case of __add_inode_ref(), where we then do something like this: iput(&inode->vfs_inode); which results in an invalid inode pointer that triggers an invalid memory access, resulting in a crash. Fix this by making sure we don't do such dereferences.
In the Linux kernel, the following vulnerability has been resolved: mm: userfaultfd: fix race of userfaultfd_move and swap cache This commit fixes two kinds of races, they may have different results: Barry reported a BUG_ON in commit c50f8e6053b0, we may see the same BUG_ON if the filemap lookup returned NULL and folio is added to swap cache after that. If another kind of race is triggered (folio changed after lookup) we may see RSS counter is corrupted: [ 406.893936] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_ANONPAGES val:-1 [ 406.894071] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_SHMEMPAGES val:1 Because the folio is being accounted to the wrong VMA. I'm not sure if there will be any data corruption though, seems no. The issues above are critical already. On seeing a swap entry PTE, userfaultfd_move does a lockless swap cache lookup, and tries to move the found folio to the faulting vma. Currently, it relies on checking the PTE value to ensure that the moved folio still belongs to the src swap entry and that no new folio has been added to the swap cache, which turns out to be unreliable. While working and reviewing the swap table series with Barry, following existing races are observed and reproduced [1]: In the example below, move_pages_pte is moving src_pte to dst_pte, where src_pte is a swap entry PTE holding swap entry S1, and S1 is not in the swap cache: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1 ... < interrupted> ... <swapin src_pte, alloc and use folio A> // folio A is a new allocated folio // and get installed into src_pte <frees swap entry S1> // src_pte now points to folio A, S1 // has swap count == 0, it can be freed // by folio_swap_swap or swap // allocator's reclaim. <try to swap out another folio B> // folio B is a folio in another VMA. <put folio B to swap cache using S1 > // S1 is freed, folio B can use it // for swap out with no problem. ... folio = filemap_get_folio(S1) // Got folio B here !!! ... < interrupted again> ... <swapin folio B and free S1> // Now S1 is free to be used again. <swapout src_pte & folio A using S1> // Now src_pte is a swap entry PTE // holding S1 again. folio_trylock(folio) move_swap_pte double_pt_lock is_pte_pages_stable // Check passed because src_pte == S1 folio_move_anon_rmap(...) // Moved invalid folio B here !!! The race window is very short and requires multiple collisions of multiple rare events, so it's very unlikely to happen, but with a deliberately constructed reproducer and increased time window, it can be reproduced easily. This can be fixed by checking if the folio returned by filemap is the valid swap cache folio after acquiring the folio lock. Another similar race is possible: filemap_get_folio may return NULL, but folio (A) could be swapped in and then swapped out again using the same swap entry after the lookup. In such a case, folio (A) may remain in the swap cache, so it must be moved too: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1, and S1 is not in swap cache folio = filemap_get ---truncated---
In the Linux kernel, the following vulnerability has been resolved: mm/shmem, swap: fix softlockup with mTHP swapin Following softlockup can be easily reproduced on my test machine with: echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device mkdir -p /sys/fs/cgroup/memory/test echo 1G > /sys/fs/cgroup/test/memory.max echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs while true; do dd if=/dev/zero of=/tmp/test.img bs=1M count=5120 cat /tmp/test.img > /dev/null rm /tmp/test.img done Then after a while: watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787] Modules linked in: zram virtiofs CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G L 6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)· Tainted: [L]=SOFTLOCKUP Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015 RIP: 0010:mpol_shared_policy_lookup+0xd/0x70 Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8 RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202 RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001 RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518 RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001 R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000 FS: 00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> shmem_alloc_folio+0x31/0xc0 shmem_swapin_folio+0x309/0xcf0 ? filemap_get_entry+0x117/0x1e0 ? xas_load+0xd/0xb0 ? filemap_get_entry+0x101/0x1e0 shmem_get_folio_gfp+0x2ed/0x5b0 shmem_file_read_iter+0x7f/0x2e0 vfs_read+0x252/0x330 ksys_read+0x68/0xf0 do_syscall_64+0x4c/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f03f9a46991 Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991 RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003 RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000 </TASK> The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in conflict with it, so swapcache_prepare fails and causes shmem_swap_alloc_folio to return -EEXIST, and shmem simply retries again and again causing this loop. Fix it by applying a similar fix for anon mTHP swapin. The performance change is very slight, time of swapin 10g zero folios with shmem (test for 12 times): Before: 2.47s After: 2.48s [kasong@tencent.com: add comment]
In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix invalid node index On a system with DRAM interleave enabled, out-of-bound access is detected: megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x46/0x4b megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas] megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas] local_pci_probe+0x42/0x90 pci_device_probe+0xdc/0x290 really_probe+0xdb/0x340 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8b/0xe0 bus_add_driver+0x142/0x220 driver_register+0x72/0xd0 megasas_init+0xdf/0xff0 [megaraid_sas] do_one_initcall+0x57/0x310 do_init_module+0x90/0x250 init_module_from_file+0x85/0xc0 idempotent_init_module+0x114/0x310 __x64_sys_finit_module+0x65/0xc0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it accordingly.
In the Linux kernel, the following vulnerability has been resolved: scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out When both the RHBA and RPA FDMI requests time out, fnic reuses a frame to send ABTS for each of them. On send completion, this causes an attempt to free the same frame twice that leads to a crash. Fix crash by allocating separate frames for RHBA and RPA, and modify ABTS logic accordingly. Tested by checking MDS for FDMI information. Tested by using instrumented driver to: - Drop PLOGI response - Drop RHBA response - Drop RPA response - Drop RHBA and RPA response - Drop PLOGI response + ABTS response - Drop RHBA response + ABTS response - Drop RPA response + ABTS response - Drop RHBA and RPA response + ABTS response for both of them
CVE-2025-38237 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: af_unix: Don't leave consecutive consumed OOB skbs. Jann Horn reported a use-after-free in unix_stream_read_generic(). The following sequences reproduce the issue: $ python3 from socket import * s1, s2 = socketpair(AF_UNIX, SOCK_STREAM) s1.send(b'x', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'y', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'z', MSG_OOB) s2.recv(1) # recv 'z' illegally s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free) Even though a user reads OOB data, the skb holding the data stays on the recv queue to mark the OOB boundary and break the next recv(). After the last send() in the scenario above, the sk2's recv queue has 2 leading consumed OOB skbs and 1 real OOB skb. Then, the following happens during the next recv() without MSG_OOB 1. unix_stream_read_generic() peeks the first consumed OOB skb 2. manage_oob() returns the next consumed OOB skb 3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb 4. unix_stream_read_generic() reads and frees the OOB skb , and the last recv(MSG_OOB) triggers KASAN splat. The 3. above occurs because of the SO_PEEK_OFF code, which does not expect unix_skb_len(skb) to be 0, but this is true for such consumed OOB skbs. while (skip >= unix_skb_len(skb)) { skip -= unix_skb_len(skb); skb = skb_peek_next(skb, &sk->sk_receive_queue); ... } In addition to this use-after-free, there is another issue that ioctl(SIOCATMARK) does not function properly with consecutive consumed OOB skbs. So, nothing good comes out of such a situation. Instead of complicating manage_oob(), ioctl() handling, and the next ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs, let's not leave such consecutive OOB unnecessarily. Now, while receiving an OOB skb in unix_stream_recv_urg(), if its previous skb is a consumed OOB skb, it is freed. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027) Read of size 4 at addr ffff888106ef2904 by task python3/315 CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:636) unix_stream_read_actor (net/unix/af_unix.c:3027) unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f8911fcea06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06 RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006 RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20 R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:348) kmem_cache_alloc_ ---truncated---
CVE-2025-38235 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In version 4.5.0, using a specially crafted tee-supplicant binary running in REE userspace, an attacker can trigger a panic in a TA that uses the libutee Secure Storage API. Many functions in libutee, specifically those which make up the Secure Storage API, will panic if a system call returns an unexpected return code. This behavior is mandated by the TEE Internal Core API specification. However, in OP-TEE’s implementation, return codes of secure storage operations are passed through unsanitized from the REE tee-supplicant, through the Linux kernel tee-driver, through the OP-TEE kernel, back to libutee. Thus, an attacker with access to REE userspace, and the ability to stop tee-supplicant and replace it with their own process (generally trivial for a root user, and depending on the way permissions are set up, potentially available even to less privileged users) can run a malicious tee-supplicant process that responds to storage requests with unexpected response codes, triggering a panic in the requesting TA. This is particularly dangerous for TAs built with `TA_FLAG_SINGLE_INSTANCE` (corresponding to `gpd.ta.singleInstance` and `TA_FLAG_INSTANCE_KEEP_ALIVE` (corresponding to `gpd.ta.keepAlive`). The behavior of these TAs may depend on memory that is preserved between sessions, and the ability of an attacker to panic the TA and reload it with a clean memory space can compromise the behavior of those TAs. A critical example of this is the optee_ftpm TA. It uses the kept alive memory to hold PCR values, which crucially must be non-resettable. An attacker who can trigger a panic in the fTPM TA can reset the PCRs, and then extend them PCRs with whatever they choose, falsifying boot measurements, accessing sealed data, and potentially more. The impact of this issue depends significantly on the behavior of affected TAs. For some, it could manifest as a denial of service, while for others, like the fTPM TA, it can result in the disclosure of sensitive data. Anyone running the fTPM TA is affected, but similar attacks may be possible on other TAs that leverage the Secure Storage API. A fix is available in commit 941a58d78c99c4754fbd4ec3079ec9e1d596af8f.
In the Linux kernel, the following vulnerability has been resolved: sched/rt: Fix race in push_rt_task Overview ======== When a CPU chooses to call push_rt_task and picks a task to push to another CPU's runqueue then it will call...
CVE-2025-38233 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: NFSD: fix race between nfsd registration and exports_proc As of now nfsd calls create_proc_exports_entry() at start of init_nfsd and cleanup by remove_proc_entry() at last of...
In the Linux kernel, the following vulnerability has been resolved: nfsd: Initialize ssc before laundromat_work to prevent NULL dereference In nfs4_state_start_net(), laundromat_work may access nfsd_ssc through nfs4_laundromat -> nfsd4_ssc_expire_umount. If nfsd_ssc isn't initialized, this can cause NULL pointer dereference. Normally the delayed start of laundromat_work allows sufficient time for nfsd_ssc initialization to complete. However, when the kernel waits too long for userspace responses (e.g. in nfs4_state_start_net -> nfsd4_end_grace -> nfsd4_record_grace_done -> nfsd4_cld_grace_done -> cld_pipe_upcall -> __cld_pipe_upcall -> wait_for_completion path), the delayed work may start before nfsd_ssc initialization finishes. Fix this by moving nfsd_ssc initialization before starting laundromat_work.
In the Linux kernel, the following vulnerability has been resolved: jfs: validate AG parameters in dbMount() to prevent crashes Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch corrupted metadata early and avoid undefined behavior in dbAllocAG. Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE: - agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift (L2LPERCTL - 2*agheight) >= 0. - agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight)) ensures agperlev >= 1. - Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5). - LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG; 2^(10 - 2*agheight) prevents division to 0. - agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within stree (size 1365). - Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8). UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9 shift exponent -335544310 is negative CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468 dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400 dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613 jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105 jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: media: cxusb: no longer judge rbuf when the write fails syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the Linux kernel, the following vulnerability has been resolved: media: imagination: fix a potential memory leak in e5010_probe() Add video_device_release() to release the memory allocated by video_device_alloc() if something goes wrong.
In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Terminating the subsequent process of initialization failure syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1] After PSI initialization fails, the si member is accessed again, resulting in this uaf. After si initialization fails, the subsequent process needs to be exited. [1] BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline] BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059 CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xd9/0x110 mm/kasan/report.c:634 vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 __do_sys_exit_group kernel/exit.c:1098 [inline] __se_sys_exit_group kernel/exit.c:1096 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096 x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f871d58d169 Code: Unable to access opcode bytes at 0x7f871d58d13f. RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169 RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003 R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840 </TASK> Allocated by task 6059: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970 vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423 vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_tabl ---truncated---
In the Linux kernel, the following vulnerability has been resolved: media: vivid: Change the siize of the composing syzkaller found a bug: BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline] BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705 Write of size 1440 at addr ffffc9000d0ffda0 by task vivid-000-vid-c/5304 CPU: 0 UID: 0 PID: 5304 Comm: vivid-000-vid-c Not tainted 6.14.0-rc2-syzkaller-00039-g09fbf3d50205 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline] tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705 vivid_fillbuff drivers/media/test-drivers/vivid/vivid-kthread-cap.c:470 [inline] vivid_thread_vid_cap_tick+0xf8e/0x60d0 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:629 vivid_thread_vid_cap+0x8aa/0xf30 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:767 kthread+0x7a9/0x920 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> The composition size cannot be larger than the size of fmt_cap_rect. So execute v4l2_rect_map_inside() even if has_compose_cap == 0.
In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Cleanup after an allocation error When allocation failures are not cleaned up by the driver, further allocation errors will be false-positives, which will cause buffers to remain uninitialized and cause NULL pointer dereferences. Ensure proper cleanup of failed allocations to prevent these issues.
In the Linux kernel, the following vulnerability has been resolved: can: kvaser_pciefd: refine error prone echo_skb_max handling logic echo_skb_max should define the supported upper limit of echo_skb[] allocated inside the netdevice's priv. The corresponding size value provided by this driver to alloc_candev() is KVASER_PCIEFD_CAN_TX_MAX_COUNT which is 17. But later echo_skb_max is rounded up to the nearest power of two (for the max case, that would be 32) and the tx/ack indices calculated further during tx/rx may exceed the upper array boundary. Kasan reported this for the ack case inside kvaser_pciefd_handle_ack_packet(), though the xmit function has actually caught the same thing earlier. BUG: KASAN: slab-out-of-bounds in kvaser_pciefd_handle_ack_packet+0x2d7/0x92a drivers/net/can/kvaser_pciefd.c:1528 Read of size 8 at addr ffff888105e4f078 by task swapper/4/0 CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 6.15.0 #12 PREEMPT(voluntary) Call Trace: <IRQ> dump_stack_lvl lib/dump_stack.c:122 print_report mm/kasan/report.c:521 kasan_report mm/kasan/report.c:634 kvaser_pciefd_handle_ack_packet drivers/net/can/kvaser_pciefd.c:1528 kvaser_pciefd_read_packet drivers/net/can/kvaser_pciefd.c:1605 kvaser_pciefd_read_buffer drivers/net/can/kvaser_pciefd.c:1656 kvaser_pciefd_receive_irq drivers/net/can/kvaser_pciefd.c:1684 kvaser_pciefd_irq_handler drivers/net/can/kvaser_pciefd.c:1733 __handle_irq_event_percpu kernel/irq/handle.c:158 handle_irq_event kernel/irq/handle.c:210 handle_edge_irq kernel/irq/chip.c:833 __common_interrupt arch/x86/kernel/irq.c:296 common_interrupt arch/x86/kernel/irq.c:286 </IRQ> Tx max count definitely matters for kvaser_pciefd_tx_avail(), but for seq numbers' generation that's not the case - we're free to calculate them as would be more convenient, not taking tx max count into account. The only downside is that the size of echo_skb[] should correspond to the max seq number (not tx max count), so in some situations a bit more memory would be consumed than could be. Thus make the size of the underlying echo_skb[] sufficient for the rounded max tx value. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: ceph: avoid kernel BUG for encrypted inode with unaligned file size The generic/397 test hits a BUG_ON for the case of encrypted inode with unaligned file size (for example, 33K or 1K): [ 877.737811] run fstests generic/397 at 2025-01-03 12:34:40 [ 877.875761] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.876130] libceph: client4614 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 877.991965] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.992334] libceph: client4617 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.017234] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.017594] libceph: client4620 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.031394] xfs_io (pid 18988) is setting deprecated v1 encryption policy; recommend upgrading to v2. [ 878.054528] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.054892] libceph: client4623 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.070287] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.070704] libceph: client4626 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.264586] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.265258] libceph: client4629 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.374578] -----------[ cut here ]------------ [ 878.374586] kernel BUG at net/ceph/messenger.c:1070! [ 878.375150] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 878.378145] CPU: 2 UID: 0 PID: 4759 Comm: kworker/2:9 Not tainted 6.13.0-rc5+ #1 [ 878.378969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 878.380167] Workqueue: ceph-msgr ceph_con_workfn [ 878.381639] RIP: 0010:ceph_msg_data_cursor_init+0x42/0x50 [ 878.382152] Code: 89 17 48 8b 46 70 55 48 89 47 08 c7 47 18 00 00 00 00 48 89 e5 e8 de cc ff ff 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 0f 0b <0f> 0b 0f 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 [ 878.383928] RSP: 0018:ffffb4ffc7cbbd28 EFLAGS: 00010287 [ 878.384447] RAX: ffffffff82bb9ac0 RBX: ffff981390c2f1f8 RCX: 0000000000000000 [ 878.385129] RDX: 0000000000009000 RSI: ffff981288232b58 RDI: ffff981390c2f378 [ 878.385839] RBP: ffffb4ffc7cbbe18 R08: 0000000000000000 R09: 0000000000000000 [ 878.386539] R10: 0000000000000000 R11: 0000000000000000 R12: ffff981390c2f030 [ 878.387203] R13: ffff981288232b58 R14: 0000000000000029 R15: 0000000000000001 [ 878.387877] FS: 0000000000000000(0000) GS:ffff9814b7900000(0000) knlGS:0000000000000000 [ 878.388663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 878.389212] CR2: 00005e106a0554e0 CR3: 0000000112bf0001 CR4: 0000000000772ef0 [ 878.389921] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 878.390620] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 878.391307] PKRU: 55555554 [ 878.391567] Call Trace: [ 878.391807] <TASK> [ 878.392021] ? show_regs+0x71/0x90 [ 878.392391] ? die+0x38/0xa0 [ 878.392667] ? do_trap+0xdb/0x100 [ 878.392981] ? do_error_trap+0x75/0xb0 [ 878.393372] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.393842] ? exc_invalid_op+0x53/0x80 [ 878.394232] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.394694] ? asm_exc_invalid_op+0x1b/0x20 [ 878.395099] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.395583] ? ceph_con_v2_try_read+0xd16/0x2220 [ 878.396027] ? _raw_spin_unlock+0xe/0x40 [ 878.396428] ? raw_spin_rq_unlock+0x10/0x40 [ 878.396842] ? finish_task_switch.isra.0+0x97/0x310 [ 878.397338] ? __schedule+0x44b/0x16b0 [ 878.397738] ceph_con_workfn+0x326/0x750 [ 878.398121] process_one_work+0x188/0x3d0 [ 878.398522] ? __pfx_worker_thread+0x10/0x10 [ 878.398929] worker_thread+0x2b5/0x3c0 [ 878.399310] ? __pfx_worker_thread+0x10/0x10 [ 878.399727] kthread+0xe1/0x120 [ 878.400031] ? __pfx_kthread+0x10/0x10 [ 878.400431] ret_from_fork+0x43/0x70 [ 878.400771] ? __pfx_kthread+0x10/0x10 [ 878.401127] ret_from_fork_asm+0x1a/0x30 [ 878.401543] </TASK> [ 878.401760] Modules l ---truncated---
In the Linux kernel, the following vulnerability has been resolved: ext4: inline: fix len overflow in ext4_prepare_inline_data When running the following code on an ext4 filesystem with inline_data feature enabled, it will lead to the bug below. fd = open("file1", O_RDWR | O_CREAT | O_TRUNC, 0666); ftruncate(fd, 30); pwrite(fd, "a", 1, (1UL << 40) + 5UL); That happens because write_begin will succeed as when ext4_generic_write_inline_data calls ext4_prepare_inline_data, pos + len will be truncated, leading to ext4_prepare_inline_data parameter to be 6 instead of 0x10000000006. Then, later when write_end is called, we hit: BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); at ext4_write_inline_data. Fix it by using a loff_t type for the len parameter in ext4_prepare_inline_data instead of an unsigned int. [ 44.545164] ------------[ cut here ]------------ [ 44.545530] kernel BUG at fs/ext4/inline.c:240! [ 44.545834] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 44.546172] CPU: 3 UID: 0 PID: 343 Comm: test Not tainted 6.15.0-rc2-00003-g9080916f4863 #45 PREEMPT(full) 112853fcebfdb93254270a7959841d2c6aa2c8bb [ 44.546523] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 44.546523] RIP: 0010:ext4_write_inline_data+0xfe/0x100 [ 44.546523] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49 [ 44.546523] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216 [ 44.546523] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006 [ 44.546523] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738 [ 44.546523] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [ 44.546523] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000 [ 44.546523] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738 [ 44.546523] FS: 00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000 [ 44.546523] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 44.546523] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0 [ 44.546523] PKRU: 55555554 [ 44.546523] Call Trace: [ 44.546523] <TASK> [ 44.546523] ext4_write_inline_data_end+0x126/0x2d0 [ 44.546523] generic_perform_write+0x17e/0x270 [ 44.546523] ext4_buffered_write_iter+0xc8/0x170 [ 44.546523] vfs_write+0x2be/0x3e0 [ 44.546523] __x64_sys_pwrite64+0x6d/0xc0 [ 44.546523] do_syscall_64+0x6a/0xf0 [ 44.546523] ? __wake_up+0x89/0xb0 [ 44.546523] ? xas_find+0x72/0x1c0 [ 44.546523] ? next_uptodate_folio+0x317/0x330 [ 44.546523] ? set_pte_range+0x1a6/0x270 [ 44.546523] ? filemap_map_pages+0x6ee/0x840 [ 44.546523] ? ext4_setattr+0x2fa/0x750 [ 44.546523] ? do_pte_missing+0x128/0xf70 [ 44.546523] ? security_inode_post_setattr+0x3e/0xd0 [ 44.546523] ? ___pte_offset_map+0x19/0x100 [ 44.546523] ? handle_mm_fault+0x721/0xa10 [ 44.546523] ? do_user_addr_fault+0x197/0x730 [ 44.546523] ? do_syscall_64+0x76/0xf0 [ 44.546523] ? arch_exit_to_user_mode_prepare+0x1e/0x60 [ 44.546523] ? irqentry_exit_to_user_mode+0x79/0x90 [ 44.546523] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 44.546523] RIP: 0033:0x7f42999c6687 [ 44.546523] Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff [ 44.546523] RSP: 002b:00007ffeae4a7930 EFLAGS: 00000202 ORIG_RAX: 0000000000000012 [ 44.546523] RAX: ffffffffffffffda RBX: 00007f4299934740 RCX: 00007f42999c6687 [ 44.546523] RDX: 0000000000000001 RSI: 000055ea6149200f RDI: 0000000000000003 [ 44.546523] RBP: 00007ffeae4a79a0 R08: 0000000000000000 R09: 0000000000000000 [ 44.546523] R10: 0000010000000005 R11: 0000000000000202 R12: 0000 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: ext4: fix out of bounds punch offset Punching a hole with a start offset that exceeds max_end is not permitted and will result in a negative length in the truncate_inode_partial_folio() function while truncating the page cache, potentially leading to undesirable consequences. A simple reproducer: truncate -s 9895604649994 /mnt/foo xfs_io -c "pwrite 8796093022208 4096" /mnt/foo xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo kernel BUG at include/linux/highmem.h:275! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110 RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287 RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000 RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000 RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000 R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005 R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000 FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> truncate_inode_partial_folio+0x3dd/0x620 truncate_inode_pages_range+0x226/0x720 ? bdev_getblk+0x52/0x3e0 ? ext4_get_group_desc+0x78/0x150 ? crc32c_arch+0xfd/0x180 ? __ext4_get_inode_loc+0x18c/0x840 ? ext4_inode_csum+0x117/0x160 ? jbd2_journal_dirty_metadata+0x61/0x390 ? __ext4_handle_dirty_metadata+0xa0/0x2b0 ? kmem_cache_free+0x90/0x5a0 ? jbd2_journal_stop+0x1d5/0x550 ? __ext4_journal_stop+0x49/0x100 truncate_pagecache_range+0x50/0x80 ext4_truncate_page_cache_block_range+0x57/0x3a0 ext4_punch_hole+0x1fe/0x670 ext4_fallocate+0x792/0x17d0 ? __count_memcg_events+0x175/0x2a0 vfs_fallocate+0x121/0x560 ksys_fallocate+0x51/0xc0 __x64_sys_fallocate+0x24/0x40 x64_sys_call+0x18d2/0x4170 do_syscall_64+0xa7/0x220 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by filtering out cases where the punching start offset exceeds max_end.
In the Linux kernel, the following vulnerability has been resolved: ext4: only dirty folios when data journaling regular files fstest generic/388 occasionally reproduces a crash that looks as follows: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ext4_block_zero_page_range+0x30c/0x380 [ext4] ext4_truncate+0x436/0x440 [ext4] ext4_process_orphan+0x5d/0x110 [ext4] ext4_orphan_cleanup+0x124/0x4f0 [ext4] ext4_fill_super+0x262d/0x3110 [ext4] get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x26/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4ed/0x6b0 do_syscall_64+0x82/0x170 ... This occurs when processing a symlink inode from the orphan list. The partial block zeroing code in the truncate path calls ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an a_ops vector in ext4, hence the crash. To avoid this problem, update the ext4_dirty_journalled_data() helper to only mark the folio dirty on regular files (for which a_ops is assigned). This also matches the journaling logic in the ext4_symlink() creation path, where ext4_handle_dirty_metadata() is called directly.
CVE-2025-38219 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38218 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: hwmon: (ftsteutates) Fix TOCTOU race in fts_read() In the fts_read() function, when handling hwmon_pwm_auto_channels_temp, the code accesses the shared variable data->fan_source[channel] twice without holding any locks. It is first checked against FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again when used as an argument to the BIT() macro. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition. Another thread executing fts_update_device() can modify the value of data->fan_source[channel] between the check and its use. If the value is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the BIT() macro will be called with a large shift value (BIT(255)). A bit shift by a value greater than or equal to the type width is undefined behavior and can lead to a crash or incorrect values being returned to userspace. Fix this by reading data->fan_source[channel] into a local variable once, eliminating the race condition. Additionally, add a bounds check to ensure the value is less than BITS_PER_LONG before passing it to the BIT() macro, making the code more robust against undefined behavior. This possible bug was found by an experimental static analysis tool developed by our team.
CVE-2025-38216 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in do_register_framebuffer() fails to allocate memory for fb_videomode, it will later lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ Even though fbcon_init() checks beforehand if fb_match_mode() in var_to_display() fails, it can not prevent the panic because fbcon_init() does not return error code. Considering this and the comment in the code about fb_match_mode() returning NULL - "This should not happen" - it is better to prevent registering the fb_info if its mode was not set successfully. Also move fb_add_videomode() closer to the beginning of do_register_framebuffer() to avoid having to do the cleanup on fail. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix fb_set_var to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in fb_set_var() fails to allocate memory for fb_videomode, later it may lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ The reason is that fb_info->var is being modified in fb_set_var(), and then fb_videomode_to_var() is called. If it fails to add the mode to fb_info->modelist, fb_set_var() returns error, but does not restore the old value of fb_info->var. Restore fb_info->var on failure the same way it is done earlier in the function. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: ipc: fix to protect IPCS lookups using RCU syzbot reported that it discovered a use-after-free vulnerability, [0] [0]: https://lore.kernel.org/all/67af13f8.050a0220.21dd3.0038.GAE@google.com/ idr_for_each() is protected by rwsem, but this is not enough. If it is not protected by RCU read-critical region, when idr_for_each() calls radix_tree_node_free() through call_rcu() to free the radix_tree_node structure, the node will be freed immediately, and when reading the next node in radix_tree_for_each_slot(), the already freed memory may be read. Therefore, we need to add code to make sure that idr_for_each() is protected within the RCU read-critical region when we call it in shm_destroy_orphaned().
In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction The commit 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") simplified cm_id resource management by freeing cm_id once all references to the cm_id were removed. The references are removed either upon completion of iw_cm event handlers or when the application destroys the cm_id. This commit introduced the use-after-free condition where cm_id_private object could still be in use by event handler works during the destruction of cm_id. The commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs") addressed this use-after- free by flushing all pending works at the cm_id destruction. However, still another use-after-free possibility remained. It happens with the work objects allocated for each cm_id_priv within alloc_work_entries() during cm_id creation, and subsequently freed in dealloc_work_entries() once all references to the cm_id are removed. If the cm_id's last reference is decremented in the event handler work, the work object for the work itself gets removed, and causes the use- after-free BUG below: BUG: KASAN: slab-use-after-free in __pwq_activate_work+0x1ff/0x250 Read of size 8 at addr ffff88811f9cf800 by task kworker/u16:1/147091 CPU: 2 UID: 0 PID: 147091 Comm: kworker/u16:1 Not tainted 6.15.0-rc2+ #27 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Workqueue: 0x0 (iw_cm_wq) Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_report+0x174/0x554 ? __virt_addr_valid+0x208/0x430 ? __pwq_activate_work+0x1ff/0x250 kasan_report+0xae/0x170 ? __pwq_activate_work+0x1ff/0x250 __pwq_activate_work+0x1ff/0x250 pwq_dec_nr_in_flight+0x8c5/0xfb0 process_one_work+0xc11/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5ef/0xfd0 ? __pfx_worker_thread+0x10/0x10 kthread+0x3b0/0x770 ? __pfx_kthread+0x10/0x10 ? rcu_is_watching+0x11/0xb0 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 147416: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 alloc_work_entries+0xa9/0x260 [iw_cm] iw_cm_connect+0x23/0x4a0 [iw_cm] rdma_connect_locked+0xbfd/0x1920 [rdma_cm] nvme_rdma_cm_handler+0x8e5/0x1b60 [nvme_rdma] cma_cm_event_handler+0xae/0x320 [rdma_cm] cma_work_handler+0x106/0x1b0 [rdma_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Freed by task 147091: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kfree+0x13a/0x4b0 dealloc_work_entries+0x125/0x1f0 [iw_cm] iwcm_deref_id+0x6f/0xa0 [iw_cm] cm_work_handler+0x136/0x1ba0 [iw_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x2c/0x50 kasan_record_aux_stack+0xa3/0xb0 __queue_work+0x2ff/0x1390 queue_work_on+0x67/0xc0 cm_event_handler+0x46a/0x820 [iw_cm] siw_cm_upcall+0x330/0x650 [siw] siw_cm_work_handler+0x6b9/0x2b20 [siw] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 This BUG is reproducible by repeating the blktests test case nvme/061 for the rdma transport and the siw driver. To avoid the use-after-free of cm_id_private work objects, ensure that the last reference to the cm_id is decremented not in the event handler works, but in the cm_id destruction context. For that purpose, mo ---truncated---
In the Linux kernel, the following vulnerability has been resolved: configfs-tsm-report: Fix NULL dereference of tsm_ops Unlike sysfs, the lifetime of configfs objects is controlled by userspace. There is no mechanism for the kernel to find and delete all created config-items. Instead, the configfs-tsm-report mechanism has an expectation that tsm_unregister() can happen at any time and cause established config-item access to start failing. That expectation is not fully satisfied. While tsm_report_read(), tsm_report_{is,is_bin}_visible(), and tsm_report_make_item() safely fail if tsm_ops have been unregistered, tsm_report_privlevel_store() tsm_report_provider_show() fail to check for ops registration. Add the missing checks for tsm_ops having been removed. Now, in supporting the ability for tsm_unregister() to always succeed, it leaves the problem of what to do with lingering config-items. The expectation is that the admin that arranges for the ->remove() (unbind) of the ${tsm_arch}-guest driver is also responsible for deletion of all open config-items. Until that deletion happens, ->probe() (reload / bind) of the ${tsm_arch}-guest driver fails. This allows for emergency shutdown / revocation of attestation interfaces, and requires coordinated restart.
In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: remove tag set when second admin queue config fails Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure concatenation") modified nvme_tcp_setup_ctrl() to call nvme_tcp_configure_admin_queue() twice. The first call prepares for DH-CHAP negotitation, and the second call is required for secure concatenation. However, this change triggered BUG KASAN slab-use-after- free in blk_mq_queue_tag_busy_iter(). This BUG can be recreated by repeating the blktests test case nvme/063 a few times [1]. When the BUG happens, nvme_tcp_create_ctrl() fails in the call chain below: nvme_tcp_create_ctrl() nvme_tcp_alloc_ctrl() new=true ... Alloc nvme_tcp_ctrl and admin_tag_set nvme_tcp_setup_ctrl() new=true nvme_tcp_configure_admin_queue() new=true ... Succeed nvme_alloc_admin_tag_set() ... Alloc the tag set for admin_tag_set nvme_stop_keep_alive() nvme_tcp_teardown_admin_queue() remove=false nvme_tcp_configure_admin_queue() new=false nvme_tcp_alloc_admin_queue() ... Fail, but do not call nvme_remove_admin_tag_set() nvme_uninit_ctrl() nvme_put_ctrl() ... Free up the nvme_tcp_ctrl and admin_tag_set The first call of nvme_tcp_configure_admin_queue() succeeds with new=true argument. The second call fails with new=false argument. This second call does not call nvme_remove_admin_tag_set() on failure, due to the new=false argument. Then the admin tag set is not removed. However, nvme_tcp_create_ctrl() assumes that nvme_tcp_setup_ctrl() would call nvme_remove_admin_tag_set(). Then it frees up struct nvme_tcp_ctrl which has admin_tag_set field. Later on, the timeout handler accesses the admin_tag_set field and causes the BUG KASAN slab-use-after-free. To not leave the admin tag set, call nvme_remove_admin_tag_set() when the second nvme_tcp_configure_admin_queue() call fails. Do not return from nvme_tcp_setup_ctrl() on failure. Instead, jump to "destroy_admin" go-to label to call nvme_tcp_teardown_admin_queue() which calls nvme_remove_admin_tag_set().
In the Linux kernel, the following vulnerability has been resolved: smb: client: add NULL check in automount_fullpath page is checked for null in __build_path_from_dentry_optional_prefix when tcon->origin_fullpath is not set. However, the check is missing when it is set. Add a check to prevent a potential NULL pointer dereference.
CVE-2025-38207 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38206 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid divide by zero by initializing dummy pitch to 1 [Why] If the dummy values in `populate_dummy_dml_surface_cfg()` aren't updated then they can lead to a divide by zero in downstream callers like CalculateVMAndRowBytes() [How] Initialize dummy value to a value to avoid divide by zero.
In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds read in add_missing_indices stbl is s8 but it must contain offsets into slot which can go from 0 to 127. Added a bound check for that error and return -EIO if the check fails. Also make jfs_readdir return with error if add_missing_indices returns with an error.
In the Linux kernel, the following vulnerability has been resolved: jfs: Fix null-ptr-deref in jfs_ioc_trim [ Syzkaller Report ] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000087: 0000 [#1 KASAN: null-ptr-deref in range [0x0000000000000438-0x000000000000043f] CPU: 2 UID: 0 PID: 10614 Comm: syz-executor.0 Not tainted 6.13.0-rc6-gfbfd64d25c7a-dirty #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-30ms RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body+0x61/0xb0 ? die_addr+0xb1/0xe0 ? exc_general_protection+0x333/0x510 ? asm_exc_general_protection+0x26/0x30 ? jfs_ioc_trim+0x34b/0x8f0 jfs_ioctl+0x3c8/0x4f0 ? __pfx_jfs_ioctl+0x10/0x10 ? __pfx_jfs_ioctl+0x10/0x10 __se_sys_ioctl+0x269/0x350 ? __pfx___se_sys_ioctl+0x10/0x10 ? do_syscall_64+0xfb/0x210 do_syscall_64+0xee/0x210 ? syscall_exit_to_user_mode+0x1e0/0x330 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe51f4903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d RSP: 002b:00007fe5202250c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fe51f5cbf80 RCX: 00007fe51f4903ad RDX: 0000000020000680 RSI: 00000000c0185879 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe520225640 R13: 000000000000000e R14: 00007fe51f44fca0 R15: 00007fe52021d000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Kernel panic - not syncing: Fatal exception [ Analysis ] We believe that we have found a concurrency bug in the `fs/jfs` module that results in a null pointer dereference. There is a closely related issue which has been fixed: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234 ... but, unfortunately, the accepted patch appears to still be susceptible to a null pointer dereference under some interleavings. To trigger the bug, we think that `JFS_SBI(ipbmap->i_sb)->bmap` is set to NULL in `dbFreeBits` and then dereferenced in `jfs_ioc_trim`. This bug manifests quite rarely under normal circumstances, but is triggereable from a syz-program.
CVE-2025-38202 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38201 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: i40e: fix MMIO write access to an invalid page in i40e_clear_hw When the device sends a specific input, an integer underflow can occur, leading to MMIO write access to an invalid page. Prevent the integer underflow by changing the type of related variables.
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix memory leak due to multiple rx_stats allocation rx_stats for each arsta is allocated when adding a station. arsta->rx_stats will be freed when a station is removed. Redundant allocations are occurring when the same station is added multiple times. This causes ath12k_mac_station_add() to be called multiple times, and rx_stats is allocated each time. As a result there is memory leaks. Prevent multiple allocations of rx_stats when ath12k_mac_station_add() is called repeatedly by checking if rx_stats is already allocated before allocating again. Allocate arsta->rx_stats if arsta->rx_stats is NULL respectively. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
In the Linux kernel, the following vulnerability has been resolved: fbcon: Make sure modelist not set on unregistered console It looks like attempting to write to the "store_modes" sysfs node will run afoul of unregistered consoles: UBSAN: array-index-out-of-bounds in drivers/video/fbdev/core/fbcon.c:122:28 index -1 is out of range for type 'fb_info *[32]' ... fbcon_info_from_console+0x192/0x1a0 drivers/video/fbdev/core/fbcon.c:122 fbcon_new_modelist+0xbf/0x2d0 drivers/video/fbdev/core/fbcon.c:3048 fb_new_modelist+0x328/0x440 drivers/video/fbdev/core/fbmem.c:673 store_modes+0x1c9/0x3e0 drivers/video/fbdev/core/fbsysfs.c:113 dev_attr_store+0x55/0x80 drivers/base/core.c:2439 static struct fb_info *fbcon_registered_fb[FB_MAX]; ... static signed char con2fb_map[MAX_NR_CONSOLES]; ... static struct fb_info *fbcon_info_from_console(int console) ... return fbcon_registered_fb[con2fb_map[console]]; If con2fb_map contains a -1 things go wrong here. Instead, return NULL, as callers of fbcon_info_from_console() are trying to compare against existing "info" pointers, so error handling should kick in correctly.
In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell_rbu: Fix list usage Pass the correct list head to list_for_each_entry*() when looping through the packet list. Without this patch, reading the packet data via sysfs will show the data incorrectly (because it starts at the wrong packet), and clearing the packet list will result in a NULL pointer dereference.
CVE-2025-38196 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38195 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38194 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: reject invalid perturb period Gerrard Tai reported that SFQ perturb_period has no range check yet, and this can be used to trigger a race condition fixed in a separate patch. We want to make sure ctl->perturb_period * HZ will not overflow and is positive. tc qd add dev lo root sfq perturb -10 # negative value : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 1000000000 # too big : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 2000000 # acceptable value tc -s -d qd sh dev lo qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0
In the Linux kernel, the following vulnerability has been resolved: net: clear the dst when changing skb protocol A not-so-careful NAT46 BPF program can crash the kernel if it indiscriminately flips ingress packets from v4 to v6: BUG: kernel...
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in destroy_previous_session If client set ->PreviousSessionId on kerberos session setup stage, NULL pointer dereference error will happen. Since sess->user is not set yet, It can pass the user argument as NULL to destroy_previous_session. sess->user will be set in ksmbd_krb5_authenticate(). So this patch move calling destroy_previous_session() after ksmbd_krb5_authenticate().
CVE-2025-38190 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Avoid NULL pointer dereference in `v3d_job_update_stats()` The following kernel Oops was recently reported by Mesa CI: [ 800.139824] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000588 [ 800.148619] Mem abort info: [ 800.151402] ESR = 0x0000000096000005 [ 800.155141] EC = 0x25: DABT (current EL), IL = 32 bits [ 800.160444] SET = 0, FnV = 0 [ 800.163488] EA = 0, S1PTW = 0 [ 800.166619] FSC = 0x05: level 1 translation fault [ 800.171487] Data abort info: [ 800.174357] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 800.179832] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 800.184873] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 800.190176] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001014c2000 [ 800.196607] [0000000000000588] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 800.205305] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 800.211564] Modules linked in: vc4 snd_soc_hdmi_codec drm_display_helper v3d cec gpu_sched drm_dma_helper drm_shmem_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm i2c_brcmstb snd_timer snd backlight [ 800.234448] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1 [ 800.244182] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 800.250005] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 800.256959] pc : v3d_job_update_stats+0x60/0x130 [v3d] [ 800.262112] lr : v3d_job_update_stats+0x48/0x130 [v3d] [ 800.267251] sp : ffffffc080003e60 [ 800.270555] x29: ffffffc080003e60 x28: ffffffd842784980 x27: 0224012000000000 [ 800.277687] x26: ffffffd84277f630 x25: ffffff81012fd800 x24: 0000000000000020 [ 800.284818] x23: ffffff8040238b08 x22: 0000000000000570 x21: 0000000000000158 [ 800.291948] x20: 0000000000000000 x19: ffffff8040238000 x18: 0000000000000000 [ 800.299078] x17: ffffffa8c1bd2000 x16: ffffffc080000000 x15: 0000000000000000 [ 800.306208] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 800.313338] x11: 0000000000000040 x10: 0000000000001a40 x9 : ffffffd83b39757c [ 800.320468] x8 : ffffffd842786420 x7 : 7fffffffffffffff x6 : 0000000000ef32b0 [ 800.327598] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : ffffffd842784980 [ 800.334728] x2 : 0000000000000004 x1 : 0000000000010002 x0 : 000000ba4c0ca382 [ 800.341859] Call trace: [ 800.344294] v3d_job_update_stats+0x60/0x130 [v3d] [ 800.349086] v3d_irq+0x124/0x2e0 [v3d] [ 800.352835] __handle_irq_event_percpu+0x58/0x218 [ 800.357539] handle_irq_event+0x54/0xb8 [ 800.361369] handle_fasteoi_irq+0xac/0x240 [ 800.365458] handle_irq_desc+0x48/0x68 [ 800.369200] generic_handle_domain_irq+0x24/0x38 [ 800.373810] gic_handle_irq+0x48/0xd8 [ 800.377464] call_on_irq_stack+0x24/0x58 [ 800.381379] do_interrupt_handler+0x88/0x98 [ 800.385554] el1_interrupt+0x34/0x68 [ 800.389123] el1h_64_irq_handler+0x18/0x28 [ 800.393211] el1h_64_irq+0x64/0x68 [ 800.396603] default_idle_call+0x3c/0x168 [ 800.400606] do_idle+0x1fc/0x230 [ 800.403827] cpu_startup_entry+0x40/0x50 [ 800.407742] rest_init+0xe4/0xf0 [ 800.410962] start_kernel+0x5e8/0x790 [ 800.414616] __primary_switched+0x80/0x90 [ 800.418622] Code: 8b170277 8b160296 11000421 b9000861 (b9401ac1) [ 800.424707] ---[ end trace 0000000000000000 ]--- [ 800.457313] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- This issue happens when the file descriptor is closed before the jobs submitted by it are completed. When the job completes, we update the global GPU stats and the per-fd GPU stats, which are exposed through fdinfo. If the file descriptor was closed, then the struct `v3d_file_priv` and its stats were already freed and we can't update the per-fd stats. Therefore, if the file descriptor was already closed, don't u ---truncated---
In the Linux kernel, the following vulnerability has been resolved: drm/msm/a7xx: Call CP_RESET_CONTEXT_STATE Calling this packet is necessary when we switch contexts because there are various pieces of state used by userspace to synchronize between BR and BV that are persistent across submits and we need to make sure that they are in a "safe" state when switching contexts. Otherwise a userspace submission in one context could cause another context to function incorrectly and hang, effectively a denial of service (although without leaking data). This was missed during initial a7xx bringup. Patchwork: https://patchwork.freedesktop.org/patch/654924/
In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix a use-after-free in r535_gsp_rpc_push() The RPC container is released after being passed to r535_gsp_rpc_send(). When sending the initial fragment of a large RPC and passing the caller's RPC container, the container will be freed prematurely. Subsequent attempts to send remaining fragments will therefore result in a use-after-free. Allocate a temporary RPC container for holding the initial fragment of a large RPC when sending. Free the caller's container when all fragments are successfully sent. [ Rebase onto Blackwell changes. - Danilo ]
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start() Before the commit under the Fixes tag below, bnxt_ulp_stop() and bnxt_ulp_start() were always invoked in pairs. After that commit, the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop() has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2nd bnxt_re_suspend() call will crash when it dereferences a NULL pointer: (NULL ib_device): Handle device suspend call BUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag is already set. This will preserve the original symmetrical bnxt_ulp_stop() and bnxt_ulp_start(). Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED flag after taking the mutex to avoid any race condition. And for symmetry, only proceed in bnxt_ulp_start() if the BNXT_EN_FLAG_ULP_STOPPED is set.
In the Linux kernel, the following vulnerability has been resolved: atm: atmtcp: Free invalid length skb in atmtcp_c_send(). syzbot reported the splat below. [0] vcc_sendmsg() copies data passed from userspace to skb and passes it to vcc->dev->ops->send(). atmtcp_c_send() accesses skb->data as struct atmtcp_hdr after checking if skb->len is 0, but it's not enough. Also, when skb->len == 0, skb and sk (vcc) were leaked because dev_kfree_skb() is not called and sk_wmem_alloc adjustment is missing to revert atm_account_tx() in vcc_sendmsg(), which is expected to be done in atm_pop_raw(). Let's properly free skb with an invalid length in atmtcp_c_send(). [0]: BUG: KMSAN: uninit-value in atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294 atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294 vcc_sendmsg+0xd7c/0xff0 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:727 ____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2620 __sys_sendmsg net/socket.c:2652 [inline] __do_sys_sendmsg net/socket.c:2657 [inline] __se_sys_sendmsg net/socket.c:2655 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655 x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4154 [inline] slab_alloc_node mm/slub.c:4197 [inline] kmem_cache_alloc_node_noprof+0x818/0xf00 mm/slub.c:4249 kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:579 __alloc_skb+0x347/0x7d0 net/core/skbuff.c:670 alloc_skb include/linux/skbuff.h:1336 [inline] vcc_sendmsg+0xb40/0xff0 net/atm/common.c:628 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:727 ____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2620 __sys_sendmsg net/socket.c:2652 [inline] __do_sys_sendmsg net/socket.c:2657 [inline] __se_sys_sendmsg net/socket.c:2655 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655 x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 5798 Comm: syz-executor192 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(undef) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
In the Linux kernel, the following vulnerability has been resolved: tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer The reproduction steps: 1. create a tun interface 2. enable l2 bearer 3. TIPC_NL_UDP_GET_REMOTEIP with media name set to tun tipc: Started in network mode tipc: Node identity 8af312d38a21, cluster identity 4711 tipc: Enabled bearer <eth:syz_tun>, priority 1 Oops: general protection fault KASAN: null-ptr-deref in range CPU: 1 UID: 1000 PID: 559 Comm: poc Not tainted 6.16.0-rc1+ #117 PREEMPT Hardware name: QEMU Ubuntu 24.04 PC RIP: 0010:tipc_udp_nl_dump_remoteip+0x4a4/0x8f0 the ub was in fact a struct dev. when bid != 0 && skip_cnt != 0, bearer_list[bid] may be NULL or other media when other thread changes it. fix this by checking media_id.
In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get() Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8). This seems correct and aligns with the PTP interrupt status register (PTP_INT_STS) specifications. However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index: lan743x_ptp_io_event_clock_get(..., u8 channel,...) { ... /* Update Local timestamp */ extts = &ptp->extts[channel]; extts->ts.tv_sec = sec; ... } To avoid an out-of-bounds write and utilize all the supported GPIO inputs, set LAN743X_PTP_N_EXTTS to 8. Detected using the static analysis tool - Svace.
CVE-2025-38182 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: calipso: Fix null-ptr-deref in calipso_req_{set,del}attr(). syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netf ---truncated---
In the Linux kernel, the following vulnerability has been resolved: net: atm: fix /proc/net/atm/lec handling /proc/net/atm/lec must ensure safety against dev_lec[] changes. It appears it had dev_put() calls without prior dev_hold(), leading to imbalance and UAF.
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix max_sge overflow in smb_extract_folioq_to_rdma() This fixes the following problem: [ 749.901015] [ T8673] run fstests cifs/001 at 2025-06-17 09:40:30 [ 750.346409] [ T9870] ================================================================== [ 750.346814] [ T9870] BUG: KASAN: slab-out-of-bounds in smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.347330] [ T9870] Write of size 8 at addr ffff888011082890 by task xfs_io/9870 [ 750.347705] [ T9870] [ 750.348077] [ T9870] CPU: 0 UID: 0 PID: 9870 Comm: xfs_io Kdump: loaded Not tainted 6.16.0-rc2-metze.02+ #1 PREEMPT(voluntary) [ 750.348082] [ T9870] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 750.348085] [ T9870] Call Trace: [ 750.348086] [ T9870] <TASK> [ 750.348088] [ T9870] dump_stack_lvl+0x76/0xa0 [ 750.348106] [ T9870] print_report+0xd1/0x640 [ 750.348116] [ T9870] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 750.348120] [ T9870] ? kasan_complete_mode_report_info+0x26/0x210 [ 750.348124] [ T9870] kasan_report+0xe7/0x130 [ 750.348128] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348262] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348377] [ T9870] __asan_report_store8_noabort+0x17/0x30 [ 750.348381] [ T9870] smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348496] [ T9870] smbd_post_send_iter+0x1990/0x3070 [cifs] [ 750.348625] [ T9870] ? __pfx_smbd_post_send_iter+0x10/0x10 [cifs] [ 750.348741] [ T9870] ? update_stack_state+0x2a0/0x670 [ 750.348749] [ T9870] ? cifs_flush+0x153/0x320 [cifs] [ 750.348870] [ T9870] ? cifs_flush+0x153/0x320 [cifs] [ 750.348990] [ T9870] ? update_stack_state+0x2a0/0x670 [ 750.348995] [ T9870] smbd_send+0x58c/0x9c0 [cifs] [ 750.349117] [ T9870] ? __pfx_smbd_send+0x10/0x10 [cifs] [ 750.349231] [ T9870] ? unwind_get_return_address+0x65/0xb0 [ 750.349235] [ T9870] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 750.349242] [ T9870] ? arch_stack_walk+0xa7/0x100 [ 750.349250] [ T9870] ? stack_trace_save+0x92/0xd0 [ 750.349254] [ T9870] __smb_send_rqst+0x931/0xec0 [cifs] [ 750.349374] [ T9870] ? kernel_text_address+0x173/0x190 [ 750.349379] [ T9870] ? kasan_save_stack+0x39/0x70 [ 750.349382] [ T9870] ? kasan_save_track+0x18/0x70 [ 750.349385] [ T9870] ? __kasan_slab_alloc+0x9d/0xa0 [ 750.349389] [ T9870] ? __pfx___smb_send_rqst+0x10/0x10 [cifs] [ 750.349508] [ T9870] ? smb2_mid_entry_alloc+0xb4/0x7e0 [cifs] [ 750.349626] [ T9870] ? cifs_call_async+0x277/0xb00 [cifs] [ 750.349746] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs] [ 750.349867] [ T9870] ? netfs_do_issue_write+0xc2/0x340 [netfs] [ 750.349900] [ T9870] ? netfs_advance_write+0x45b/0x1270 [netfs] [ 750.349929] [ T9870] ? netfs_write_folio+0xd6c/0x1be0 [netfs] [ 750.349958] [ T9870] ? netfs_writepages+0x2e9/0xa80 [netfs] [ 750.349987] [ T9870] ? do_writepages+0x21f/0x590 [ 750.349993] [ T9870] ? filemap_fdatawrite_wbc+0xe1/0x140 [ 750.349997] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 750.350002] [ T9870] smb_send_rqst+0x22e/0x2f0 [cifs] [ 750.350131] [ T9870] ? __pfx_smb_send_rqst+0x10/0x10 [cifs] [ 750.350255] [ T9870] ? local_clock_noinstr+0xe/0xd0 [ 750.350261] [ T9870] ? kasan_save_alloc_info+0x37/0x60 [ 750.350268] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.350271] [ T9870] ? _raw_spin_lock+0x81/0xf0 [ 750.350275] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.350278] [ T9870] ? smb2_setup_async_request+0x293/0x580 [cifs] [ 750.350398] [ T9870] cifs_call_async+0x477/0xb00 [cifs] [ 750.350518] [ T9870] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs] [ 750.350636] [ T9870] ? __pfx_cifs_call_async+0x10/0x10 [cifs] [ 750.350756] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.350760] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.350763] [ T98 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: sch_hfsc: make hfsc_qlen_notify() idempotent hfsc_qlen_notify() is not idempotent either and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life: 1. update_vf() decreases cl->cl_nactive, so we can check whether it is non-zero before calling it. 2. eltree_remove() always removes RB node cl->el_node, but we can use RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe.
In the Linux kernel, the following vulnerability has been resolved: binder: fix use-after-free in binderfs_evict_inode() Running 'stress-ng --binderfs 16 --timeout 300' under KASAN-enabled kernel, I've noticed the following: BUG: KASAN: slab-use-after-free in binderfs_evict_inode+0x1de/0x2d0 Write of size 8 at addr ffff88807379bc08 by task stress-ng-binde/1699 CPU: 0 UID: 0 PID: 1699 Comm: stress-ng-binde Not tainted 6.14.0-rc7-g586de92313fc-dirty #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1c2/0x2a0 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 print_report+0x155/0x840 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 ? __phys_addr+0xba/0x170 ? binderfs_evict_inode+0x1de/0x2d0 kasan_report+0x147/0x180 ? binderfs_evict_inode+0x1de/0x2d0 binderfs_evict_inode+0x1de/0x2d0 ? __pfx_binderfs_evict_inode+0x10/0x10 evict+0x524/0x9f0 ? __pfx_lock_release+0x10/0x10 ? __pfx_evict+0x10/0x10 ? do_raw_spin_unlock+0x4d/0x210 ? _raw_spin_unlock+0x28/0x50 ? iput+0x697/0x9b0 __dentry_kill+0x209/0x660 ? shrink_kill+0x8d/0x2c0 shrink_kill+0xa9/0x2c0 shrink_dentry_list+0x2e0/0x5e0 shrink_dcache_parent+0xa2/0x2c0 ? __pfx_shrink_dcache_parent+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 do_one_tree+0x23/0xe0 shrink_dcache_for_umount+0xa0/0x170 generic_shutdown_super+0x67/0x390 kill_litter_super+0x76/0xb0 binderfs_kill_super+0x44/0x90 deactivate_locked_super+0xb9/0x130 cleanup_mnt+0x422/0x4c0 ? lockdep_hardirqs_on+0x9d/0x150 task_work_run+0x1d2/0x260 ? __pfx_task_work_run+0x10/0x10 resume_user_mode_work+0x52/0x60 syscall_exit_to_user_mode+0x9a/0x120 do_syscall_64+0x103/0x210 ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0xcac57b Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 RSP: 002b:00007ffecf4226a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007ffecf422720 RCX: 0000000000cac57b RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffecf422850 RBP: 00007ffecf422850 R08: 0000000028d06ab1 R09: 7fffffffffffffff R10: 3fffffffffffffff R11: 0000000000000246 R12: 00007ffecf422718 R13: 00007ffecf422710 R14: 00007f478f87b658 R15: 00007ffecf422830 </TASK> Allocated by task 1705: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x213/0x3e0 binderfs_binder_device_create+0x183/0xa80 binder_ctl_ioctl+0x138/0x190 __x64_sys_ioctl+0x120/0x1b0 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1705: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x46/0x50 __kasan_slab_free+0x62/0x70 kfree+0x194/0x440 evict+0x524/0x9f0 do_unlinkat+0x390/0x5b0 __x64_sys_unlink+0x47/0x50 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f This 'stress-ng' workload causes the concurrent deletions from 'binder_devices' and so requires full-featured synchronization to prevent list corruption. I've found this issue independently but pretty sure that syzbot did the same, so Reported-by: and Closes: should be applicable here as well.
In the Linux kernel, the following vulnerability has been resolved: binder: fix yet another UAF in binder_devices Commit e77aff5528a18 ("binderfs: fix use-after-free in binder_devices") addressed a use-after-free where devices could be released without first being removed from the binder_devices list. However, there is a similar path in binder_free_proc() that was missed: ================================================================== BUG: KASAN: slab-use-after-free in binder_remove_device+0xd4/0x100 Write of size 8 at addr ffff0000c773b900 by task umount/467 CPU: 12 UID: 0 PID: 467 Comm: umount Not tainted 6.15.0-rc7-00138-g57483a362741 #9 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_remove_device+0xd4/0x100 binderfs_evict_inode+0x230/0x2f0 evict+0x25c/0x5dc iput+0x304/0x480 dentry_unlink_inode+0x208/0x46c __dentry_kill+0x154/0x530 [...] Allocated by task 463: __kmalloc_cache_noprof+0x13c/0x324 binderfs_binder_device_create.isra.0+0x138/0xa60 binder_ctl_ioctl+0x1ac/0x230 [...] Freed by task 215: kfree+0x184/0x31c binder_proc_dec_tmpref+0x33c/0x4ac binder_deferred_func+0xc10/0x1108 process_one_work+0x520/0xba4 [...] ================================================================== Call binder_remove_device() within binder_free_proc() to ensure the device is removed from the binder_devices list before being kfreed.
In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Do not double dequeue a configuration request Some of our devices crash in tb_cfg_request_dequeue(): general protection fault, probably for non-canonical address 0xdead000000000122 CPU: 6 PID: 91007 Comm: kworker/6:2 Tainted: G U W 6.6.65 RIP: 0010:tb_cfg_request_dequeue+0x2d/0xa0 Call Trace: <TASK> ? tb_cfg_request_dequeue+0x2d/0xa0 tb_cfg_request_work+0x33/0x80 worker_thread+0x386/0x8f0 kthread+0xed/0x110 ret_from_fork+0x38/0x50 ret_from_fork_asm+0x1b/0x30 The circumstances are unclear, however, the theory is that tb_cfg_request_work() can be scheduled twice for a request: first time via frame.callback from ring_work() and second time from tb_cfg_request(). Both times kworkers will execute tb_cfg_request_dequeue(), which results in double list_del() from the ctl->request_queue (the list poison deference hints at it: 0xdead000000000122). Do not dequeue requests that don't have TB_CFG_REQUEST_ACTIVE bit set.
CVE-2025-38173 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: erofs: avoid using multiple devices with different type For multiple devices, both primary and extra devices should be the same type. `erofs_init_device` has already guaranteed that if the primary is a file-backed device, extra devices should also be regular files. However, if the primary is a block device while the extra device is a file-backed device, `erofs_init_device` will get an ENOTBLK, which is not treated as an error in `erofs_fc_get_tree`, and that leads to an UAF: erofs_fc_get_tree get_tree_bdev_flags(erofs_fc_fill_super) erofs_read_superblock erofs_init_device // sbi->dif0 is not inited yet, // return -ENOTBLK deactivate_locked_super free(sbi) if (err is -ENOTBLK) sbi->dif0.file = filp_open() // sbi UAF So if -ENOTBLK is hitted in `erofs_init_device`, it means the primary device must be a block device, and the extra device is not a block device. The error can be converted to -EINVAL.
In the Linux kernel, the following vulnerability has been resolved: power: supply: max77705: Fix workqueue error handling in probe The create_singlethread_workqueue() doesn't return error pointers, it returns NULL. Also cleanup the workqueue on the error paths.
CVE-2025-38170 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38169 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
A remote code execution vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: handle hdr_first_de() return value The hdr_first_de() function returns a pointer to a struct NTFS_DE. This pointer may be NULL. To handle the NULL error effectively, it is important to implement an error handler. This will help manage potential errors consistently. Additionally, error handling for the return value already exists at other points where this function is called. Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVE-2025-38166 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix panic when calling skb_linearize The panic can be reproduced by executing the command: ./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --rx-strp 100000 Then a kernel panic was captured: ''' [ 657.460555] kernel BUG at net/core/skbuff.c:2178! [ 657.462680] Tainted: [W]=WARN [ 657.463287] Workqueue: events sk_psock_backlog ... [ 657.469610] <TASK> [ 657.469738] ? die+0x36/0x90 [ 657.469916] ? do_trap+0x1d0/0x270 [ 657.470118] ? pskb_expand_head+0x612/0xf40 [ 657.470376] ? pskb_expand_head+0x612/0xf40 [ 657.470620] ? do_error_trap+0xa3/0x170 [ 657.470846] ? pskb_expand_head+0x612/0xf40 [ 657.471092] ? handle_invalid_op+0x2c/0x40 [ 657.471335] ? pskb_expand_head+0x612/0xf40 [ 657.471579] ? exc_invalid_op+0x2d/0x40 [ 657.471805] ? asm_exc_invalid_op+0x1a/0x20 [ 657.472052] ? pskb_expand_head+0xd1/0xf40 [ 657.472292] ? pskb_expand_head+0x612/0xf40 [ 657.472540] ? lock_acquire+0x18f/0x4e0 [ 657.472766] ? find_held_lock+0x2d/0x110 [ 657.472999] ? __pfx_pskb_expand_head+0x10/0x10 [ 657.473263] ? __kmalloc_cache_noprof+0x5b/0x470 [ 657.473537] ? __pfx___lock_release.isra.0+0x10/0x10 [ 657.473826] __pskb_pull_tail+0xfd/0x1d20 [ 657.474062] ? __kasan_slab_alloc+0x4e/0x90 [ 657.474707] sk_psock_skb_ingress_enqueue+0x3bf/0x510 [ 657.475392] ? __kasan_kmalloc+0xaa/0xb0 [ 657.476010] sk_psock_backlog+0x5cf/0xd70 [ 657.476637] process_one_work+0x858/0x1a20 ''' The panic originates from the assertion BUG_ON(skb_shared(skb)) in skb_linearize(). A previous commit(see Fixes tag) introduced skb_get() to avoid race conditions between skb operations in the backlog and skb release in the recvmsg path. However, this caused the panic to always occur when skb_linearize is executed. The "--rx-strp 100000" parameter forces the RX path to use the strparser module which aggregates data until it reaches 100KB before calling sockmap logic. The 100KB payload exceeds MAX_MSG_FRAGS, triggering skb_linearize. To fix this issue, just move skb_get into sk_psock_skb_ingress_enqueue. ''' sk_psock_backlog: sk_psock_handle_skb skb_get(skb) <== we move it into 'sk_psock_skb_ingress_enqueue' sk_psock_skb_ingress____________ ↓ | | → sk_psock_skb_ingress_self | sk_psock_skb_ingress_enqueue sk_psock_verdict_apply_________________↑ skb_linearize ''' Note that for verdict_apply path, the skb_get operation is unnecessary so we add 'take_ref' param to control it's behavior.
CVE-2025-38164 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on sbi->total_valid_block_count syzbot reported a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/f2fs.h:2521! RIP: 0010:dec_valid_block_count+0x3b2/0x3c0 fs/f2fs/f2fs.h:2521 Call Trace: f2fs_truncate_data_blocks_range+0xc8c/0x11a0 fs/f2fs/file.c:695 truncate_dnode+0x417/0x740 fs/f2fs/node.c:973 truncate_nodes+0x3ec/0xf50 fs/f2fs/node.c:1014 f2fs_truncate_inode_blocks+0x8e3/0x1370 fs/f2fs/node.c:1197 f2fs_do_truncate_blocks+0x840/0x12b0 fs/f2fs/file.c:810 f2fs_truncate_blocks+0x10d/0x300 fs/f2fs/file.c:838 f2fs_truncate+0x417/0x720 fs/f2fs/file.c:888 f2fs_setattr+0xc4f/0x12f0 fs/f2fs/file.c:1112 notify_change+0xbca/0xe90 fs/attr.c:552 do_truncate+0x222/0x310 fs/open.c:65 handle_truncate fs/namei.c:3466 [inline] do_open fs/namei.c:3849 [inline] path_openat+0x2e4f/0x35d0 fs/namei.c:4004 do_filp_open+0x284/0x4e0 fs/namei.c:4031 do_sys_openat2+0x12b/0x1d0 fs/open.c:1429 do_sys_open fs/open.c:1444 [inline] __do_sys_creat fs/open.c:1522 [inline] __se_sys_creat fs/open.c:1516 [inline] __x64_sys_creat+0x124/0x170 fs/open.c:1516 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/syscall_64.c:94 The reason is: in fuzzed image, sbi->total_valid_block_count is inconsistent w/ mapped blocks indexed by inode, so, we should not trigger panic for such case, instead, let's print log and set fsck flag.
CVE-2025-38254 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix crash in wacom_aes_battery_handler() Commit fd2a9b29dc9c ("HID: wacom: Remove AES power_supply after extended inactivity") introduced wacom_aes_battery_handler() which is scheduled as a delayed work (aes_battery_work). In wacom_remove(), aes_battery_work is not canceled. Consequently, if the device is removed while aes_battery_work is still pending, then hard crashes or "Oops: general protection fault..." are experienced when wacom_aes_battery_handler() is finally called. E.g., this happens with built-in USB devices after resume from hibernate when aes_battery_work was still pending at the time of hibernation. So, take care to cancel aes_battery_work in wacom_remove().
In the Linux kernel, the following vulnerability has been resolved: cxl/ras: Fix CPER handler device confusion By inspection, cxl_cper_handle_prot_err() is making a series of fragile assumptions that can lead to crashes: 1/ It assumes that endpoints identified in the record are a CXL-type-3 device, nothing guarantees that. 2/ It assumes that the device is bound to the cxl_pci driver, nothing guarantees that. 3/ Minor, it holds the device lock over the switch-port tracing for no reason as the trace is 100% generated from data in the record. Correct those by checking that the PCIe endpoint parents a cxl_memdev before assuming the format of the driver data, and move the lock to where it is required. Consequently this also makes the implementation ready for CXL accelerators that are not bound to cxl_pci.
In the Linux kernel, the following vulnerability has been resolved: atm: clip: prevent NULL deref in clip_push() Blamed commit missed that vcc_destroy_socket() calls clip_push() with a NULL skb. If clip_devs is NULL, clip_push() then crashes when reading skb->truesize.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix use-after-free in vhci_flush() syzbot reported use-after-free in vhci_flush() without repro. [0] From the splat, a thread close()d a vhci file descriptor...
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3() In snd_usb_get_audioformat_uac3(), the length value returned from snd_usb_ctl_msg() is used directly for memory allocation without validation. This length is controlled by the USB device. The allocated buffer is cast to a uac3_cluster_header_descriptor and its fields are accessed without verifying that the buffer is large enough. If the device returns a smaller than expected length, this leads to an out-of-bounds read. Add a length check to ensure the buffer is large enough for uac3_cluster_header_descriptor.
In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix use-after-free during router port configuration The bridge maintains a global list of ports behind which a multicast router resides.
CVE-2025-38247 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: bnxt: properly flush XDP redirect lists We encountered following crash when testing a XDP_REDIRECT feature in production: [56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd 40f30). [56251.601413] ------------[ cut here ]------------ [56251.611357] kernel BUG at lib/list_debug.c:29! [56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6. 3 #1 [56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE [56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025 [56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0 [56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48 89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89 [56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246 [56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000 [56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80 [56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18 [56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000 [56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40 [56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000 [56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0 [56251.831365] PKRU: 55555554 [56251.838653] Call Trace: [56251.845560] <IRQ> [56251.851943] cpu_map_enqueue.cold+0x5/0xa [56251.860243] xdp_do_redirect+0x2d9/0x480 [56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en] [56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en] [56251.885665] ? cpu_max_write+0x1e/0x100 [56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en] [56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en] [56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.944250] __napi_poll+0x2b/0x160 [56251.951155] bpf_trampoline_6442548651+0x79/0x123 [56251.959262] __napi_poll+0x5/0x160 [56251.966037] net_rx_action+0x3d2/0x880 [56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.989262] ? __hrtimer_run_queues+0x162/0x2a0 [56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en] [56252.019903] handle_softirqs+0xcf/0x270 [56252.026650] irq_exit_rcu+0x67/0x90 [56252.032933] common_interrupt+0x85/0xa0 [56252.039498] </IRQ> [56252.044246] <TASK> [56252.048935] asm_common_interrupt+0x26/0x40 [56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420 [56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae 01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29 [56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202 [56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000 [56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000 [56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e [56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860 [56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000 [56252.146667] ? cpuidle_enter_state+0xab/0x420 [56252.153909] cpuidle_enter+0x2d/0x40 [56252.160360] do_idle+0x176/0x1c0 [56252.166456 ---truncated---
CVE-2025-38245 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential deadlock when reconnecting channels Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order and prevent the following deadlock from happening ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc3-build2+ #1301 Tainted: G S W ------------------------------------------------------ cifsd/6055 is trying to acquire lock: ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200 but task is already holding lock: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ret_buf->chan_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_setup_session+0x81/0x4b0 cifs_get_smb_ses+0x771/0x900 cifs_mount_get_session+0x7e/0x170 cifs_mount+0x92/0x2d0 cifs_smb3_do_mount+0x161/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&ret_buf->ses_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_match_super+0x101/0x320 sget+0xab/0x270 cifs_smb3_do_mount+0x1e0/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}: check_noncircular+0x95/0xc0 check_prev_add+0x115/0x2f0 validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_signal_cifsd_for_reconnect+0x134/0x200 __cifs_reconnect+0x8f/0x500 cifs_handle_standard+0x112/0x280 cifs_demultiplex_thread+0x64d/0xbc0 kthread+0x2f7/0x310 ret_from_fork+0x2a/0x230 ret_from_fork_asm+0x1a/0x30 other info that might help us debug this: Chain exists of: &tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ret_buf->chan_lock); lock(&ret_buf->ses_lock); lock(&ret_buf->chan_lock); lock(&tcp_ses->srv_lock); *** DEADLOCK *** 3 locks held by cifsd/6055: #0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200 #1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200 #2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid inode pointer dereferences during log replay In a few places where we call read_one_inode(), if we get a NULL pointer we end up jumping into an error path, or fallthrough in case of __add_inode_ref(), where we then do something like this: iput(&inode->vfs_inode); which results in an invalid inode pointer that triggers an invalid memory access, resulting in a crash. Fix this by making sure we don't do such dereferences.
In the Linux kernel, the following vulnerability has been resolved: mm: userfaultfd: fix race of userfaultfd_move and swap cache This commit fixes two kinds of races, they may have different results: Barry reported a BUG_ON in commit c50f8e6053b0, we may see the same BUG_ON if the filemap lookup returned NULL and folio is added to swap cache after that. If another kind of race is triggered (folio changed after lookup) we may see RSS counter is corrupted: [ 406.893936] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_ANONPAGES val:-1 [ 406.894071] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_SHMEMPAGES val:1 Because the folio is being accounted to the wrong VMA. I'm not sure if there will be any data corruption though, seems no. The issues above are critical already. On seeing a swap entry PTE, userfaultfd_move does a lockless swap cache lookup, and tries to move the found folio to the faulting vma. Currently, it relies on checking the PTE value to ensure that the moved folio still belongs to the src swap entry and that no new folio has been added to the swap cache, which turns out to be unreliable. While working and reviewing the swap table series with Barry, following existing races are observed and reproduced [1]: In the example below, move_pages_pte is moving src_pte to dst_pte, where src_pte is a swap entry PTE holding swap entry S1, and S1 is not in the swap cache: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1 ... < interrupted> ... <swapin src_pte, alloc and use folio A> // folio A is a new allocated folio // and get installed into src_pte <frees swap entry S1> // src_pte now points to folio A, S1 // has swap count == 0, it can be freed // by folio_swap_swap or swap // allocator's reclaim. <try to swap out another folio B> // folio B is a folio in another VMA. <put folio B to swap cache using S1 > // S1 is freed, folio B can use it // for swap out with no problem. ... folio = filemap_get_folio(S1) // Got folio B here !!! ... < interrupted again> ... <swapin folio B and free S1> // Now S1 is free to be used again. <swapout src_pte & folio A using S1> // Now src_pte is a swap entry PTE // holding S1 again. folio_trylock(folio) move_swap_pte double_pt_lock is_pte_pages_stable // Check passed because src_pte == S1 folio_move_anon_rmap(...) // Moved invalid folio B here !!! The race window is very short and requires multiple collisions of multiple rare events, so it's very unlikely to happen, but with a deliberately constructed reproducer and increased time window, it can be reproduced easily. This can be fixed by checking if the folio returned by filemap is the valid swap cache folio after acquiring the folio lock. Another similar race is possible: filemap_get_folio may return NULL, but folio (A) could be swapped in and then swapped out again using the same swap entry after the lookup. In such a case, folio (A) may remain in the swap cache, so it must be moved too: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1, and S1 is not in swap cache folio = filemap_get ---truncated---
In the Linux kernel, the following vulnerability has been resolved: mm/shmem, swap: fix softlockup with mTHP swapin Following softlockup can be easily reproduced on my test machine with: echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device mkdir -p /sys/fs/cgroup/memory/test echo 1G > /sys/fs/cgroup/test/memory.max echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs while true; do dd if=/dev/zero of=/tmp/test.img bs=1M count=5120 cat /tmp/test.img > /dev/null rm /tmp/test.img done Then after a while: watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787] Modules linked in: zram virtiofs CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G L 6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)· Tainted: [L]=SOFTLOCKUP Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015 RIP: 0010:mpol_shared_policy_lookup+0xd/0x70 Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8 RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202 RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001 RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518 RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001 R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000 FS: 00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> shmem_alloc_folio+0x31/0xc0 shmem_swapin_folio+0x309/0xcf0 ? filemap_get_entry+0x117/0x1e0 ? xas_load+0xd/0xb0 ? filemap_get_entry+0x101/0x1e0 shmem_get_folio_gfp+0x2ed/0x5b0 shmem_file_read_iter+0x7f/0x2e0 vfs_read+0x252/0x330 ksys_read+0x68/0xf0 do_syscall_64+0x4c/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f03f9a46991 Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991 RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003 RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000 </TASK> The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in conflict with it, so swapcache_prepare fails and causes shmem_swap_alloc_folio to return -EEXIST, and shmem simply retries again and again causing this loop. Fix it by applying a similar fix for anon mTHP swapin. The performance change is very slight, time of swapin 10g zero folios with shmem (test for 12 times): Before: 2.47s After: 2.48s [kasong@tencent.com: add comment]
In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix invalid node index On a system with DRAM interleave enabled, out-of-bound access is detected: megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x46/0x4b megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas] megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas] local_pci_probe+0x42/0x90 pci_device_probe+0xdc/0x290 really_probe+0xdb/0x340 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8b/0xe0 bus_add_driver+0x142/0x220 driver_register+0x72/0xd0 megasas_init+0xdf/0xff0 [megaraid_sas] do_one_initcall+0x57/0x310 do_init_module+0x90/0x250 init_module_from_file+0x85/0xc0 idempotent_init_module+0x114/0x310 __x64_sys_finit_module+0x65/0xc0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it accordingly.
In the Linux kernel, the following vulnerability has been resolved: scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out When both the RHBA and RPA FDMI requests time out, fnic reuses a frame to send ABTS for each of them. On send completion, this causes an attempt to free the same frame twice that leads to a crash. Fix crash by allocating separate frames for RHBA and RPA, and modify ABTS logic accordingly. Tested by checking MDS for FDMI information. Tested by using instrumented driver to: - Drop PLOGI response - Drop RHBA response - Drop RPA response - Drop RHBA and RPA response - Drop PLOGI response + ABTS response - Drop RHBA response + ABTS response - Drop RPA response + ABTS response - Drop RHBA and RPA response + ABTS response for both of them
CVE-2025-38237 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: af_unix: Don't leave consecutive consumed OOB skbs. Jann Horn reported a use-after-free in unix_stream_read_generic(). The following sequences reproduce the issue: $ python3 from socket import * s1, s2 = socketpair(AF_UNIX, SOCK_STREAM) s1.send(b'x', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'y', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'z', MSG_OOB) s2.recv(1) # recv 'z' illegally s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free) Even though a user reads OOB data, the skb holding the data stays on the recv queue to mark the OOB boundary and break the next recv(). After the last send() in the scenario above, the sk2's recv queue has 2 leading consumed OOB skbs and 1 real OOB skb. Then, the following happens during the next recv() without MSG_OOB 1. unix_stream_read_generic() peeks the first consumed OOB skb 2. manage_oob() returns the next consumed OOB skb 3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb 4. unix_stream_read_generic() reads and frees the OOB skb , and the last recv(MSG_OOB) triggers KASAN splat. The 3. above occurs because of the SO_PEEK_OFF code, which does not expect unix_skb_len(skb) to be 0, but this is true for such consumed OOB skbs. while (skip >= unix_skb_len(skb)) { skip -= unix_skb_len(skb); skb = skb_peek_next(skb, &sk->sk_receive_queue); ... } In addition to this use-after-free, there is another issue that ioctl(SIOCATMARK) does not function properly with consecutive consumed OOB skbs. So, nothing good comes out of such a situation. Instead of complicating manage_oob(), ioctl() handling, and the next ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs, let's not leave such consecutive OOB unnecessarily. Now, while receiving an OOB skb in unix_stream_recv_urg(), if its previous skb is a consumed OOB skb, it is freed. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027) Read of size 4 at addr ffff888106ef2904 by task python3/315 CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:636) unix_stream_read_actor (net/unix/af_unix.c:3027) unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f8911fcea06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06 RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006 RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20 R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:348) kmem_cache_alloc_ ---truncated---
CVE-2025-38235 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In version 4.5.0, using a specially crafted tee-supplicant binary running in REE userspace, an attacker can trigger a panic in a TA that uses the libutee Secure Storage API. Many functions in libutee, specifically those which make up the Secure Storage API, will panic if a system call returns an unexpected return code. This behavior is mandated by the TEE Internal Core API specification. However, in OP-TEE’s implementation, return codes of secure storage operations are passed through unsanitized from the REE tee-supplicant, through the Linux kernel tee-driver, through the OP-TEE kernel, back to libutee. Thus, an attacker with access to REE userspace, and the ability to stop tee-supplicant and replace it with their own process (generally trivial for a root user, and depending on the way permissions are set up, potentially available even to less privileged users) can run a malicious tee-supplicant process that responds to storage requests with unexpected response codes, triggering a panic in the requesting TA. This is particularly dangerous for TAs built with `TA_FLAG_SINGLE_INSTANCE` (corresponding to `gpd.ta.singleInstance` and `TA_FLAG_INSTANCE_KEEP_ALIVE` (corresponding to `gpd.ta.keepAlive`). The behavior of these TAs may depend on memory that is preserved between sessions, and the ability of an attacker to panic the TA and reload it with a clean memory space can compromise the behavior of those TAs. A critical example of this is the optee_ftpm TA. It uses the kept alive memory to hold PCR values, which crucially must be non-resettable. An attacker who can trigger a panic in the fTPM TA can reset the PCRs, and then extend them PCRs with whatever they choose, falsifying boot measurements, accessing sealed data, and potentially more. The impact of this issue depends significantly on the behavior of affected TAs. For some, it could manifest as a denial of service, while for others, like the fTPM TA, it can result in the disclosure of sensitive data. Anyone running the fTPM TA is affected, but similar attacks may be possible on other TAs that leverage the Secure Storage API. A fix is available in commit 941a58d78c99c4754fbd4ec3079ec9e1d596af8f.
In the Linux kernel, the following vulnerability has been resolved: sched/rt: Fix race in push_rt_task Overview ======== When a CPU chooses to call push_rt_task and picks a task to push to another CPU's runqueue then it will call...
CVE-2025-38233 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: NFSD: fix race between nfsd registration and exports_proc As of now nfsd calls create_proc_exports_entry() at start of init_nfsd and cleanup by remove_proc_entry() at last of...
In the Linux kernel, the following vulnerability has been resolved: nfsd: Initialize ssc before laundromat_work to prevent NULL dereference In nfs4_state_start_net(), laundromat_work may access nfsd_ssc through nfs4_laundromat -> nfsd4_ssc_expire_umount. If nfsd_ssc isn't initialized, this can cause NULL pointer dereference. Normally the delayed start of laundromat_work allows sufficient time for nfsd_ssc initialization to complete. However, when the kernel waits too long for userspace responses (e.g. in nfs4_state_start_net -> nfsd4_end_grace -> nfsd4_record_grace_done -> nfsd4_cld_grace_done -> cld_pipe_upcall -> __cld_pipe_upcall -> wait_for_completion path), the delayed work may start before nfsd_ssc initialization finishes. Fix this by moving nfsd_ssc initialization before starting laundromat_work.
In the Linux kernel, the following vulnerability has been resolved: jfs: validate AG parameters in dbMount() to prevent crashes Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch corrupted metadata early and avoid undefined behavior in dbAllocAG. Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE: - agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift (L2LPERCTL - 2*agheight) >= 0. - agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight)) ensures agperlev >= 1. - Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5). - LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG; 2^(10 - 2*agheight) prevents division to 0. - agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within stree (size 1365). - Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8). UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9 shift exponent -335544310 is negative CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468 dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400 dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613 jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105 jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: media: cxusb: no longer judge rbuf when the write fails syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the Linux kernel, the following vulnerability has been resolved: media: imagination: fix a potential memory leak in e5010_probe() Add video_device_release() to release the memory allocated by video_device_alloc() if something goes wrong.
In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Terminating the subsequent process of initialization failure syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1] After PSI initialization fails, the si member is accessed again, resulting in this uaf. After si initialization fails, the subsequent process needs to be exited. [1] BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline] BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059 CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xd9/0x110 mm/kasan/report.c:634 vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 __do_sys_exit_group kernel/exit.c:1098 [inline] __se_sys_exit_group kernel/exit.c:1096 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096 x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f871d58d169 Code: Unable to access opcode bytes at 0x7f871d58d13f. RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169 RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003 R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840 </TASK> Allocated by task 6059: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970 vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423 vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_tabl ---truncated---
In the Linux kernel, the following vulnerability has been resolved: media: vivid: Change the siize of the composing syzkaller found a bug: BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline] BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705 Write of size 1440 at addr ffffc9000d0ffda0 by task vivid-000-vid-c/5304 CPU: 0 UID: 0 PID: 5304 Comm: vivid-000-vid-c Not tainted 6.14.0-rc2-syzkaller-00039-g09fbf3d50205 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline] tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705 vivid_fillbuff drivers/media/test-drivers/vivid/vivid-kthread-cap.c:470 [inline] vivid_thread_vid_cap_tick+0xf8e/0x60d0 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:629 vivid_thread_vid_cap+0x8aa/0xf30 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:767 kthread+0x7a9/0x920 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> The composition size cannot be larger than the size of fmt_cap_rect. So execute v4l2_rect_map_inside() even if has_compose_cap == 0.
In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Cleanup after an allocation error When allocation failures are not cleaned up by the driver, further allocation errors will be false-positives, which will cause buffers to remain uninitialized and cause NULL pointer dereferences. Ensure proper cleanup of failed allocations to prevent these issues.
In the Linux kernel, the following vulnerability has been resolved: can: kvaser_pciefd: refine error prone echo_skb_max handling logic echo_skb_max should define the supported upper limit of echo_skb[] allocated inside the netdevice's priv. The corresponding size value provided by this driver to alloc_candev() is KVASER_PCIEFD_CAN_TX_MAX_COUNT which is 17. But later echo_skb_max is rounded up to the nearest power of two (for the max case, that would be 32) and the tx/ack indices calculated further during tx/rx may exceed the upper array boundary. Kasan reported this for the ack case inside kvaser_pciefd_handle_ack_packet(), though the xmit function has actually caught the same thing earlier. BUG: KASAN: slab-out-of-bounds in kvaser_pciefd_handle_ack_packet+0x2d7/0x92a drivers/net/can/kvaser_pciefd.c:1528 Read of size 8 at addr ffff888105e4f078 by task swapper/4/0 CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 6.15.0 #12 PREEMPT(voluntary) Call Trace: <IRQ> dump_stack_lvl lib/dump_stack.c:122 print_report mm/kasan/report.c:521 kasan_report mm/kasan/report.c:634 kvaser_pciefd_handle_ack_packet drivers/net/can/kvaser_pciefd.c:1528 kvaser_pciefd_read_packet drivers/net/can/kvaser_pciefd.c:1605 kvaser_pciefd_read_buffer drivers/net/can/kvaser_pciefd.c:1656 kvaser_pciefd_receive_irq drivers/net/can/kvaser_pciefd.c:1684 kvaser_pciefd_irq_handler drivers/net/can/kvaser_pciefd.c:1733 __handle_irq_event_percpu kernel/irq/handle.c:158 handle_irq_event kernel/irq/handle.c:210 handle_edge_irq kernel/irq/chip.c:833 __common_interrupt arch/x86/kernel/irq.c:296 common_interrupt arch/x86/kernel/irq.c:286 </IRQ> Tx max count definitely matters for kvaser_pciefd_tx_avail(), but for seq numbers' generation that's not the case - we're free to calculate them as would be more convenient, not taking tx max count into account. The only downside is that the size of echo_skb[] should correspond to the max seq number (not tx max count), so in some situations a bit more memory would be consumed than could be. Thus make the size of the underlying echo_skb[] sufficient for the rounded max tx value. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: ceph: avoid kernel BUG for encrypted inode with unaligned file size The generic/397 test hits a BUG_ON for the case of encrypted inode with unaligned file size (for example, 33K or 1K): [ 877.737811] run fstests generic/397 at 2025-01-03 12:34:40 [ 877.875761] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.876130] libceph: client4614 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 877.991965] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.992334] libceph: client4617 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.017234] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.017594] libceph: client4620 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.031394] xfs_io (pid 18988) is setting deprecated v1 encryption policy; recommend upgrading to v2. [ 878.054528] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.054892] libceph: client4623 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.070287] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.070704] libceph: client4626 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.264586] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.265258] libceph: client4629 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.374578] -----------[ cut here ]------------ [ 878.374586] kernel BUG at net/ceph/messenger.c:1070! [ 878.375150] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 878.378145] CPU: 2 UID: 0 PID: 4759 Comm: kworker/2:9 Not tainted 6.13.0-rc5+ #1 [ 878.378969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 878.380167] Workqueue: ceph-msgr ceph_con_workfn [ 878.381639] RIP: 0010:ceph_msg_data_cursor_init+0x42/0x50 [ 878.382152] Code: 89 17 48 8b 46 70 55 48 89 47 08 c7 47 18 00 00 00 00 48 89 e5 e8 de cc ff ff 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 0f 0b <0f> 0b 0f 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 [ 878.383928] RSP: 0018:ffffb4ffc7cbbd28 EFLAGS: 00010287 [ 878.384447] RAX: ffffffff82bb9ac0 RBX: ffff981390c2f1f8 RCX: 0000000000000000 [ 878.385129] RDX: 0000000000009000 RSI: ffff981288232b58 RDI: ffff981390c2f378 [ 878.385839] RBP: ffffb4ffc7cbbe18 R08: 0000000000000000 R09: 0000000000000000 [ 878.386539] R10: 0000000000000000 R11: 0000000000000000 R12: ffff981390c2f030 [ 878.387203] R13: ffff981288232b58 R14: 0000000000000029 R15: 0000000000000001 [ 878.387877] FS: 0000000000000000(0000) GS:ffff9814b7900000(0000) knlGS:0000000000000000 [ 878.388663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 878.389212] CR2: 00005e106a0554e0 CR3: 0000000112bf0001 CR4: 0000000000772ef0 [ 878.389921] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 878.390620] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 878.391307] PKRU: 55555554 [ 878.391567] Call Trace: [ 878.391807] <TASK> [ 878.392021] ? show_regs+0x71/0x90 [ 878.392391] ? die+0x38/0xa0 [ 878.392667] ? do_trap+0xdb/0x100 [ 878.392981] ? do_error_trap+0x75/0xb0 [ 878.393372] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.393842] ? exc_invalid_op+0x53/0x80 [ 878.394232] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.394694] ? asm_exc_invalid_op+0x1b/0x20 [ 878.395099] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.395583] ? ceph_con_v2_try_read+0xd16/0x2220 [ 878.396027] ? _raw_spin_unlock+0xe/0x40 [ 878.396428] ? raw_spin_rq_unlock+0x10/0x40 [ 878.396842] ? finish_task_switch.isra.0+0x97/0x310 [ 878.397338] ? __schedule+0x44b/0x16b0 [ 878.397738] ceph_con_workfn+0x326/0x750 [ 878.398121] process_one_work+0x188/0x3d0 [ 878.398522] ? __pfx_worker_thread+0x10/0x10 [ 878.398929] worker_thread+0x2b5/0x3c0 [ 878.399310] ? __pfx_worker_thread+0x10/0x10 [ 878.399727] kthread+0xe1/0x120 [ 878.400031] ? __pfx_kthread+0x10/0x10 [ 878.400431] ret_from_fork+0x43/0x70 [ 878.400771] ? __pfx_kthread+0x10/0x10 [ 878.401127] ret_from_fork_asm+0x1a/0x30 [ 878.401543] </TASK> [ 878.401760] Modules l ---truncated---
In the Linux kernel, the following vulnerability has been resolved: ext4: inline: fix len overflow in ext4_prepare_inline_data When running the following code on an ext4 filesystem with inline_data feature enabled, it will lead to the bug below. fd = open("file1", O_RDWR | O_CREAT | O_TRUNC, 0666); ftruncate(fd, 30); pwrite(fd, "a", 1, (1UL << 40) + 5UL); That happens because write_begin will succeed as when ext4_generic_write_inline_data calls ext4_prepare_inline_data, pos + len will be truncated, leading to ext4_prepare_inline_data parameter to be 6 instead of 0x10000000006. Then, later when write_end is called, we hit: BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); at ext4_write_inline_data. Fix it by using a loff_t type for the len parameter in ext4_prepare_inline_data instead of an unsigned int. [ 44.545164] ------------[ cut here ]------------ [ 44.545530] kernel BUG at fs/ext4/inline.c:240! [ 44.545834] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 44.546172] CPU: 3 UID: 0 PID: 343 Comm: test Not tainted 6.15.0-rc2-00003-g9080916f4863 #45 PREEMPT(full) 112853fcebfdb93254270a7959841d2c6aa2c8bb [ 44.546523] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 44.546523] RIP: 0010:ext4_write_inline_data+0xfe/0x100 [ 44.546523] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49 [ 44.546523] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216 [ 44.546523] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006 [ 44.546523] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738 [ 44.546523] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [ 44.546523] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000 [ 44.546523] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738 [ 44.546523] FS: 00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000 [ 44.546523] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 44.546523] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0 [ 44.546523] PKRU: 55555554 [ 44.546523] Call Trace: [ 44.546523] <TASK> [ 44.546523] ext4_write_inline_data_end+0x126/0x2d0 [ 44.546523] generic_perform_write+0x17e/0x270 [ 44.546523] ext4_buffered_write_iter+0xc8/0x170 [ 44.546523] vfs_write+0x2be/0x3e0 [ 44.546523] __x64_sys_pwrite64+0x6d/0xc0 [ 44.546523] do_syscall_64+0x6a/0xf0 [ 44.546523] ? __wake_up+0x89/0xb0 [ 44.546523] ? xas_find+0x72/0x1c0 [ 44.546523] ? next_uptodate_folio+0x317/0x330 [ 44.546523] ? set_pte_range+0x1a6/0x270 [ 44.546523] ? filemap_map_pages+0x6ee/0x840 [ 44.546523] ? ext4_setattr+0x2fa/0x750 [ 44.546523] ? do_pte_missing+0x128/0xf70 [ 44.546523] ? security_inode_post_setattr+0x3e/0xd0 [ 44.546523] ? ___pte_offset_map+0x19/0x100 [ 44.546523] ? handle_mm_fault+0x721/0xa10 [ 44.546523] ? do_user_addr_fault+0x197/0x730 [ 44.546523] ? do_syscall_64+0x76/0xf0 [ 44.546523] ? arch_exit_to_user_mode_prepare+0x1e/0x60 [ 44.546523] ? irqentry_exit_to_user_mode+0x79/0x90 [ 44.546523] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 44.546523] RIP: 0033:0x7f42999c6687 [ 44.546523] Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff [ 44.546523] RSP: 002b:00007ffeae4a7930 EFLAGS: 00000202 ORIG_RAX: 0000000000000012 [ 44.546523] RAX: ffffffffffffffda RBX: 00007f4299934740 RCX: 00007f42999c6687 [ 44.546523] RDX: 0000000000000001 RSI: 000055ea6149200f RDI: 0000000000000003 [ 44.546523] RBP: 00007ffeae4a79a0 R08: 0000000000000000 R09: 0000000000000000 [ 44.546523] R10: 0000010000000005 R11: 0000000000000202 R12: 0000 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: ext4: fix out of bounds punch offset Punching a hole with a start offset that exceeds max_end is not permitted and will result in a negative length in the truncate_inode_partial_folio() function while truncating the page cache, potentially leading to undesirable consequences. A simple reproducer: truncate -s 9895604649994 /mnt/foo xfs_io -c "pwrite 8796093022208 4096" /mnt/foo xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo kernel BUG at include/linux/highmem.h:275! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110 RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287 RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000 RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000 RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000 R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005 R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000 FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> truncate_inode_partial_folio+0x3dd/0x620 truncate_inode_pages_range+0x226/0x720 ? bdev_getblk+0x52/0x3e0 ? ext4_get_group_desc+0x78/0x150 ? crc32c_arch+0xfd/0x180 ? __ext4_get_inode_loc+0x18c/0x840 ? ext4_inode_csum+0x117/0x160 ? jbd2_journal_dirty_metadata+0x61/0x390 ? __ext4_handle_dirty_metadata+0xa0/0x2b0 ? kmem_cache_free+0x90/0x5a0 ? jbd2_journal_stop+0x1d5/0x550 ? __ext4_journal_stop+0x49/0x100 truncate_pagecache_range+0x50/0x80 ext4_truncate_page_cache_block_range+0x57/0x3a0 ext4_punch_hole+0x1fe/0x670 ext4_fallocate+0x792/0x17d0 ? __count_memcg_events+0x175/0x2a0 vfs_fallocate+0x121/0x560 ksys_fallocate+0x51/0xc0 __x64_sys_fallocate+0x24/0x40 x64_sys_call+0x18d2/0x4170 do_syscall_64+0xa7/0x220 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by filtering out cases where the punching start offset exceeds max_end.
In the Linux kernel, the following vulnerability has been resolved: ext4: only dirty folios when data journaling regular files fstest generic/388 occasionally reproduces a crash that looks as follows: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ext4_block_zero_page_range+0x30c/0x380 [ext4] ext4_truncate+0x436/0x440 [ext4] ext4_process_orphan+0x5d/0x110 [ext4] ext4_orphan_cleanup+0x124/0x4f0 [ext4] ext4_fill_super+0x262d/0x3110 [ext4] get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x26/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4ed/0x6b0 do_syscall_64+0x82/0x170 ... This occurs when processing a symlink inode from the orphan list. The partial block zeroing code in the truncate path calls ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an a_ops vector in ext4, hence the crash. To avoid this problem, update the ext4_dirty_journalled_data() helper to only mark the folio dirty on regular files (for which a_ops is assigned). This also matches the journaling logic in the ext4_symlink() creation path, where ext4_handle_dirty_metadata() is called directly.
CVE-2025-38219 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38218 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: hwmon: (ftsteutates) Fix TOCTOU race in fts_read() In the fts_read() function, when handling hwmon_pwm_auto_channels_temp, the code accesses the shared variable data->fan_source[channel] twice without holding any locks. It is first checked against FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again when used as an argument to the BIT() macro. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition. Another thread executing fts_update_device() can modify the value of data->fan_source[channel] between the check and its use. If the value is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the BIT() macro will be called with a large shift value (BIT(255)). A bit shift by a value greater than or equal to the type width is undefined behavior and can lead to a crash or incorrect values being returned to userspace. Fix this by reading data->fan_source[channel] into a local variable once, eliminating the race condition. Additionally, add a bounds check to ensure the value is less than BITS_PER_LONG before passing it to the BIT() macro, making the code more robust against undefined behavior. This possible bug was found by an experimental static analysis tool developed by our team.
CVE-2025-38216 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in do_register_framebuffer() fails to allocate memory for fb_videomode, it will later lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ Even though fbcon_init() checks beforehand if fb_match_mode() in var_to_display() fails, it can not prevent the panic because fbcon_init() does not return error code. Considering this and the comment in the code about fb_match_mode() returning NULL - "This should not happen" - it is better to prevent registering the fb_info if its mode was not set successfully. Also move fb_add_videomode() closer to the beginning of do_register_framebuffer() to avoid having to do the cleanup on fail. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix fb_set_var to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in fb_set_var() fails to allocate memory for fb_videomode, later it may lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ The reason is that fb_info->var is being modified in fb_set_var(), and then fb_videomode_to_var() is called. If it fails to add the mode to fb_info->modelist, fb_set_var() returns error, but does not restore the old value of fb_info->var. Restore fb_info->var on failure the same way it is done earlier in the function. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: ipc: fix to protect IPCS lookups using RCU syzbot reported that it discovered a use-after-free vulnerability, [0] [0]: https://lore.kernel.org/all/67af13f8.050a0220.21dd3.0038.GAE@google.com/ idr_for_each() is protected by rwsem, but this is not enough. If it is not protected by RCU read-critical region, when idr_for_each() calls radix_tree_node_free() through call_rcu() to free the radix_tree_node structure, the node will be freed immediately, and when reading the next node in radix_tree_for_each_slot(), the already freed memory may be read. Therefore, we need to add code to make sure that idr_for_each() is protected within the RCU read-critical region when we call it in shm_destroy_orphaned().
In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction The commit 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") simplified cm_id resource management by freeing cm_id once all references to the cm_id were removed. The references are removed either upon completion of iw_cm event handlers or when the application destroys the cm_id. This commit introduced the use-after-free condition where cm_id_private object could still be in use by event handler works during the destruction of cm_id. The commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs") addressed this use-after- free by flushing all pending works at the cm_id destruction. However, still another use-after-free possibility remained. It happens with the work objects allocated for each cm_id_priv within alloc_work_entries() during cm_id creation, and subsequently freed in dealloc_work_entries() once all references to the cm_id are removed. If the cm_id's last reference is decremented in the event handler work, the work object for the work itself gets removed, and causes the use- after-free BUG below: BUG: KASAN: slab-use-after-free in __pwq_activate_work+0x1ff/0x250 Read of size 8 at addr ffff88811f9cf800 by task kworker/u16:1/147091 CPU: 2 UID: 0 PID: 147091 Comm: kworker/u16:1 Not tainted 6.15.0-rc2+ #27 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Workqueue: 0x0 (iw_cm_wq) Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_report+0x174/0x554 ? __virt_addr_valid+0x208/0x430 ? __pwq_activate_work+0x1ff/0x250 kasan_report+0xae/0x170 ? __pwq_activate_work+0x1ff/0x250 __pwq_activate_work+0x1ff/0x250 pwq_dec_nr_in_flight+0x8c5/0xfb0 process_one_work+0xc11/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5ef/0xfd0 ? __pfx_worker_thread+0x10/0x10 kthread+0x3b0/0x770 ? __pfx_kthread+0x10/0x10 ? rcu_is_watching+0x11/0xb0 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 147416: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 alloc_work_entries+0xa9/0x260 [iw_cm] iw_cm_connect+0x23/0x4a0 [iw_cm] rdma_connect_locked+0xbfd/0x1920 [rdma_cm] nvme_rdma_cm_handler+0x8e5/0x1b60 [nvme_rdma] cma_cm_event_handler+0xae/0x320 [rdma_cm] cma_work_handler+0x106/0x1b0 [rdma_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Freed by task 147091: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kfree+0x13a/0x4b0 dealloc_work_entries+0x125/0x1f0 [iw_cm] iwcm_deref_id+0x6f/0xa0 [iw_cm] cm_work_handler+0x136/0x1ba0 [iw_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x2c/0x50 kasan_record_aux_stack+0xa3/0xb0 __queue_work+0x2ff/0x1390 queue_work_on+0x67/0xc0 cm_event_handler+0x46a/0x820 [iw_cm] siw_cm_upcall+0x330/0x650 [siw] siw_cm_work_handler+0x6b9/0x2b20 [siw] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 This BUG is reproducible by repeating the blktests test case nvme/061 for the rdma transport and the siw driver. To avoid the use-after-free of cm_id_private work objects, ensure that the last reference to the cm_id is decremented not in the event handler works, but in the cm_id destruction context. For that purpose, mo ---truncated---
In the Linux kernel, the following vulnerability has been resolved: configfs-tsm-report: Fix NULL dereference of tsm_ops Unlike sysfs, the lifetime of configfs objects is controlled by userspace. There is no mechanism for the kernel to find and delete all created config-items. Instead, the configfs-tsm-report mechanism has an expectation that tsm_unregister() can happen at any time and cause established config-item access to start failing. That expectation is not fully satisfied. While tsm_report_read(), tsm_report_{is,is_bin}_visible(), and tsm_report_make_item() safely fail if tsm_ops have been unregistered, tsm_report_privlevel_store() tsm_report_provider_show() fail to check for ops registration. Add the missing checks for tsm_ops having been removed. Now, in supporting the ability for tsm_unregister() to always succeed, it leaves the problem of what to do with lingering config-items. The expectation is that the admin that arranges for the ->remove() (unbind) of the ${tsm_arch}-guest driver is also responsible for deletion of all open config-items. Until that deletion happens, ->probe() (reload / bind) of the ${tsm_arch}-guest driver fails. This allows for emergency shutdown / revocation of attestation interfaces, and requires coordinated restart.
In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: remove tag set when second admin queue config fails Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure concatenation") modified nvme_tcp_setup_ctrl() to call nvme_tcp_configure_admin_queue() twice. The first call prepares for DH-CHAP negotitation, and the second call is required for secure concatenation. However, this change triggered BUG KASAN slab-use-after- free in blk_mq_queue_tag_busy_iter(). This BUG can be recreated by repeating the blktests test case nvme/063 a few times [1]. When the BUG happens, nvme_tcp_create_ctrl() fails in the call chain below: nvme_tcp_create_ctrl() nvme_tcp_alloc_ctrl() new=true ... Alloc nvme_tcp_ctrl and admin_tag_set nvme_tcp_setup_ctrl() new=true nvme_tcp_configure_admin_queue() new=true ... Succeed nvme_alloc_admin_tag_set() ... Alloc the tag set for admin_tag_set nvme_stop_keep_alive() nvme_tcp_teardown_admin_queue() remove=false nvme_tcp_configure_admin_queue() new=false nvme_tcp_alloc_admin_queue() ... Fail, but do not call nvme_remove_admin_tag_set() nvme_uninit_ctrl() nvme_put_ctrl() ... Free up the nvme_tcp_ctrl and admin_tag_set The first call of nvme_tcp_configure_admin_queue() succeeds with new=true argument. The second call fails with new=false argument. This second call does not call nvme_remove_admin_tag_set() on failure, due to the new=false argument. Then the admin tag set is not removed. However, nvme_tcp_create_ctrl() assumes that nvme_tcp_setup_ctrl() would call nvme_remove_admin_tag_set(). Then it frees up struct nvme_tcp_ctrl which has admin_tag_set field. Later on, the timeout handler accesses the admin_tag_set field and causes the BUG KASAN slab-use-after-free. To not leave the admin tag set, call nvme_remove_admin_tag_set() when the second nvme_tcp_configure_admin_queue() call fails. Do not return from nvme_tcp_setup_ctrl() on failure. Instead, jump to "destroy_admin" go-to label to call nvme_tcp_teardown_admin_queue() which calls nvme_remove_admin_tag_set().
In the Linux kernel, the following vulnerability has been resolved: smb: client: add NULL check in automount_fullpath page is checked for null in __build_path_from_dentry_optional_prefix when tcon->origin_fullpath is not set. However, the check is missing when it is set. Add a check to prevent a potential NULL pointer dereference.
CVE-2025-38207 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38206 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid divide by zero by initializing dummy pitch to 1 [Why] If the dummy values in `populate_dummy_dml_surface_cfg()` aren't updated then they can lead to a divide by zero in downstream callers like CalculateVMAndRowBytes() [How] Initialize dummy value to a value to avoid divide by zero.
In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds read in add_missing_indices stbl is s8 but it must contain offsets into slot which can go from 0 to 127. Added a bound check for that error and return -EIO if the check fails. Also make jfs_readdir return with error if add_missing_indices returns with an error.
In the Linux kernel, the following vulnerability has been resolved: jfs: Fix null-ptr-deref in jfs_ioc_trim [ Syzkaller Report ] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000087: 0000 [#1 KASAN: null-ptr-deref in range [0x0000000000000438-0x000000000000043f] CPU: 2 UID: 0 PID: 10614 Comm: syz-executor.0 Not tainted 6.13.0-rc6-gfbfd64d25c7a-dirty #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-30ms RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body+0x61/0xb0 ? die_addr+0xb1/0xe0 ? exc_general_protection+0x333/0x510 ? asm_exc_general_protection+0x26/0x30 ? jfs_ioc_trim+0x34b/0x8f0 jfs_ioctl+0x3c8/0x4f0 ? __pfx_jfs_ioctl+0x10/0x10 ? __pfx_jfs_ioctl+0x10/0x10 __se_sys_ioctl+0x269/0x350 ? __pfx___se_sys_ioctl+0x10/0x10 ? do_syscall_64+0xfb/0x210 do_syscall_64+0xee/0x210 ? syscall_exit_to_user_mode+0x1e0/0x330 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe51f4903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d RSP: 002b:00007fe5202250c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fe51f5cbf80 RCX: 00007fe51f4903ad RDX: 0000000020000680 RSI: 00000000c0185879 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe520225640 R13: 000000000000000e R14: 00007fe51f44fca0 R15: 00007fe52021d000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Kernel panic - not syncing: Fatal exception [ Analysis ] We believe that we have found a concurrency bug in the `fs/jfs` module that results in a null pointer dereference. There is a closely related issue which has been fixed: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234 ... but, unfortunately, the accepted patch appears to still be susceptible to a null pointer dereference under some interleavings. To trigger the bug, we think that `JFS_SBI(ipbmap->i_sb)->bmap` is set to NULL in `dbFreeBits` and then dereferenced in `jfs_ioc_trim`. This bug manifests quite rarely under normal circumstances, but is triggereable from a syz-program.
CVE-2025-38202 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38201 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: i40e: fix MMIO write access to an invalid page in i40e_clear_hw When the device sends a specific input, an integer underflow can occur, leading to MMIO write access to an invalid page. Prevent the integer underflow by changing the type of related variables.
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix memory leak due to multiple rx_stats allocation rx_stats for each arsta is allocated when adding a station. arsta->rx_stats will be freed when a station is removed. Redundant allocations are occurring when the same station is added multiple times. This causes ath12k_mac_station_add() to be called multiple times, and rx_stats is allocated each time. As a result there is memory leaks. Prevent multiple allocations of rx_stats when ath12k_mac_station_add() is called repeatedly by checking if rx_stats is already allocated before allocating again. Allocate arsta->rx_stats if arsta->rx_stats is NULL respectively. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
In the Linux kernel, the following vulnerability has been resolved: fbcon: Make sure modelist not set on unregistered console It looks like attempting to write to the "store_modes" sysfs node will run afoul of unregistered consoles: UBSAN: array-index-out-of-bounds in drivers/video/fbdev/core/fbcon.c:122:28 index -1 is out of range for type 'fb_info *[32]' ... fbcon_info_from_console+0x192/0x1a0 drivers/video/fbdev/core/fbcon.c:122 fbcon_new_modelist+0xbf/0x2d0 drivers/video/fbdev/core/fbcon.c:3048 fb_new_modelist+0x328/0x440 drivers/video/fbdev/core/fbmem.c:673 store_modes+0x1c9/0x3e0 drivers/video/fbdev/core/fbsysfs.c:113 dev_attr_store+0x55/0x80 drivers/base/core.c:2439 static struct fb_info *fbcon_registered_fb[FB_MAX]; ... static signed char con2fb_map[MAX_NR_CONSOLES]; ... static struct fb_info *fbcon_info_from_console(int console) ... return fbcon_registered_fb[con2fb_map[console]]; If con2fb_map contains a -1 things go wrong here. Instead, return NULL, as callers of fbcon_info_from_console() are trying to compare against existing "info" pointers, so error handling should kick in correctly.
In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell_rbu: Fix list usage Pass the correct list head to list_for_each_entry*() when looping through the packet list. Without this patch, reading the packet data via sysfs will show the data incorrectly (because it starts at the wrong packet), and clearing the packet list will result in a NULL pointer dereference.
CVE-2025-38196 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38195 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38194 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: reject invalid perturb period Gerrard Tai reported that SFQ perturb_period has no range check yet, and this can be used to trigger a race condition fixed in a separate patch. We want to make sure ctl->perturb_period * HZ will not overflow and is positive. tc qd add dev lo root sfq perturb -10 # negative value : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 1000000000 # too big : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 2000000 # acceptable value tc -s -d qd sh dev lo qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0
In the Linux kernel, the following vulnerability has been resolved: net: clear the dst when changing skb protocol A not-so-careful NAT46 BPF program can crash the kernel if it indiscriminately flips ingress packets from v4 to v6: BUG: kernel...
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in destroy_previous_session If client set ->PreviousSessionId on kerberos session setup stage, NULL pointer dereference error will happen. Since sess->user is not set yet, It can pass the user argument as NULL to destroy_previous_session. sess->user will be set in ksmbd_krb5_authenticate(). So this patch move calling destroy_previous_session() after ksmbd_krb5_authenticate().
CVE-2025-38190 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Avoid NULL pointer dereference in `v3d_job_update_stats()` The following kernel Oops was recently reported by Mesa CI: [ 800.139824] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000588 [ 800.148619] Mem abort info: [ 800.151402] ESR = 0x0000000096000005 [ 800.155141] EC = 0x25: DABT (current EL), IL = 32 bits [ 800.160444] SET = 0, FnV = 0 [ 800.163488] EA = 0, S1PTW = 0 [ 800.166619] FSC = 0x05: level 1 translation fault [ 800.171487] Data abort info: [ 800.174357] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 800.179832] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 800.184873] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 800.190176] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001014c2000 [ 800.196607] [0000000000000588] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 800.205305] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 800.211564] Modules linked in: vc4 snd_soc_hdmi_codec drm_display_helper v3d cec gpu_sched drm_dma_helper drm_shmem_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm i2c_brcmstb snd_timer snd backlight [ 800.234448] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1 [ 800.244182] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 800.250005] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 800.256959] pc : v3d_job_update_stats+0x60/0x130 [v3d] [ 800.262112] lr : v3d_job_update_stats+0x48/0x130 [v3d] [ 800.267251] sp : ffffffc080003e60 [ 800.270555] x29: ffffffc080003e60 x28: ffffffd842784980 x27: 0224012000000000 [ 800.277687] x26: ffffffd84277f630 x25: ffffff81012fd800 x24: 0000000000000020 [ 800.284818] x23: ffffff8040238b08 x22: 0000000000000570 x21: 0000000000000158 [ 800.291948] x20: 0000000000000000 x19: ffffff8040238000 x18: 0000000000000000 [ 800.299078] x17: ffffffa8c1bd2000 x16: ffffffc080000000 x15: 0000000000000000 [ 800.306208] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 800.313338] x11: 0000000000000040 x10: 0000000000001a40 x9 : ffffffd83b39757c [ 800.320468] x8 : ffffffd842786420 x7 : 7fffffffffffffff x6 : 0000000000ef32b0 [ 800.327598] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : ffffffd842784980 [ 800.334728] x2 : 0000000000000004 x1 : 0000000000010002 x0 : 000000ba4c0ca382 [ 800.341859] Call trace: [ 800.344294] v3d_job_update_stats+0x60/0x130 [v3d] [ 800.349086] v3d_irq+0x124/0x2e0 [v3d] [ 800.352835] __handle_irq_event_percpu+0x58/0x218 [ 800.357539] handle_irq_event+0x54/0xb8 [ 800.361369] handle_fasteoi_irq+0xac/0x240 [ 800.365458] handle_irq_desc+0x48/0x68 [ 800.369200] generic_handle_domain_irq+0x24/0x38 [ 800.373810] gic_handle_irq+0x48/0xd8 [ 800.377464] call_on_irq_stack+0x24/0x58 [ 800.381379] do_interrupt_handler+0x88/0x98 [ 800.385554] el1_interrupt+0x34/0x68 [ 800.389123] el1h_64_irq_handler+0x18/0x28 [ 800.393211] el1h_64_irq+0x64/0x68 [ 800.396603] default_idle_call+0x3c/0x168 [ 800.400606] do_idle+0x1fc/0x230 [ 800.403827] cpu_startup_entry+0x40/0x50 [ 800.407742] rest_init+0xe4/0xf0 [ 800.410962] start_kernel+0x5e8/0x790 [ 800.414616] __primary_switched+0x80/0x90 [ 800.418622] Code: 8b170277 8b160296 11000421 b9000861 (b9401ac1) [ 800.424707] ---[ end trace 0000000000000000 ]--- [ 800.457313] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- This issue happens when the file descriptor is closed before the jobs submitted by it are completed. When the job completes, we update the global GPU stats and the per-fd GPU stats, which are exposed through fdinfo. If the file descriptor was closed, then the struct `v3d_file_priv` and its stats were already freed and we can't update the per-fd stats. Therefore, if the file descriptor was already closed, don't u ---truncated---
In the Linux kernel, the following vulnerability has been resolved: drm/msm/a7xx: Call CP_RESET_CONTEXT_STATE Calling this packet is necessary when we switch contexts because there are various pieces of state used by userspace to synchronize between BR and BV that are persistent across submits and we need to make sure that they are in a "safe" state when switching contexts. Otherwise a userspace submission in one context could cause another context to function incorrectly and hang, effectively a denial of service (although without leaking data). This was missed during initial a7xx bringup. Patchwork: https://patchwork.freedesktop.org/patch/654924/
In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix a use-after-free in r535_gsp_rpc_push() The RPC container is released after being passed to r535_gsp_rpc_send(). When sending the initial fragment of a large RPC and passing the caller's RPC container, the container will be freed prematurely. Subsequent attempts to send remaining fragments will therefore result in a use-after-free. Allocate a temporary RPC container for holding the initial fragment of a large RPC when sending. Free the caller's container when all fragments are successfully sent. [ Rebase onto Blackwell changes. - Danilo ]
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start() Before the commit under the Fixes tag below, bnxt_ulp_stop() and bnxt_ulp_start() were always invoked in pairs. After that commit, the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop() has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2nd bnxt_re_suspend() call will crash when it dereferences a NULL pointer: (NULL ib_device): Handle device suspend call BUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag is already set. This will preserve the original symmetrical bnxt_ulp_stop() and bnxt_ulp_start(). Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED flag after taking the mutex to avoid any race condition. And for symmetry, only proceed in bnxt_ulp_start() if the BNXT_EN_FLAG_ULP_STOPPED is set.
In the Linux kernel, the following vulnerability has been resolved: atm: atmtcp: Free invalid length skb in atmtcp_c_send(). syzbot reported the splat below. [0] vcc_sendmsg() copies data passed from userspace to skb and passes it to vcc->dev->ops->send(). atmtcp_c_send() accesses skb->data as struct atmtcp_hdr after checking if skb->len is 0, but it's not enough. Also, when skb->len == 0, skb and sk (vcc) were leaked because dev_kfree_skb() is not called and sk_wmem_alloc adjustment is missing to revert atm_account_tx() in vcc_sendmsg(), which is expected to be done in atm_pop_raw(). Let's properly free skb with an invalid length in atmtcp_c_send(). [0]: BUG: KMSAN: uninit-value in atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294 atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294 vcc_sendmsg+0xd7c/0xff0 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:727 ____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2620 __sys_sendmsg net/socket.c:2652 [inline] __do_sys_sendmsg net/socket.c:2657 [inline] __se_sys_sendmsg net/socket.c:2655 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655 x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4154 [inline] slab_alloc_node mm/slub.c:4197 [inline] kmem_cache_alloc_node_noprof+0x818/0xf00 mm/slub.c:4249 kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:579 __alloc_skb+0x347/0x7d0 net/core/skbuff.c:670 alloc_skb include/linux/skbuff.h:1336 [inline] vcc_sendmsg+0xb40/0xff0 net/atm/common.c:628 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:727 ____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2620 __sys_sendmsg net/socket.c:2652 [inline] __do_sys_sendmsg net/socket.c:2657 [inline] __se_sys_sendmsg net/socket.c:2655 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655 x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 5798 Comm: syz-executor192 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(undef) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
In the Linux kernel, the following vulnerability has been resolved: tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer The reproduction steps: 1. create a tun interface 2. enable l2 bearer 3. TIPC_NL_UDP_GET_REMOTEIP with media name set to tun tipc: Started in network mode tipc: Node identity 8af312d38a21, cluster identity 4711 tipc: Enabled bearer <eth:syz_tun>, priority 1 Oops: general protection fault KASAN: null-ptr-deref in range CPU: 1 UID: 1000 PID: 559 Comm: poc Not tainted 6.16.0-rc1+ #117 PREEMPT Hardware name: QEMU Ubuntu 24.04 PC RIP: 0010:tipc_udp_nl_dump_remoteip+0x4a4/0x8f0 the ub was in fact a struct dev. when bid != 0 && skip_cnt != 0, bearer_list[bid] may be NULL or other media when other thread changes it. fix this by checking media_id.
In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get() Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8). This seems correct and aligns with the PTP interrupt status register (PTP_INT_STS) specifications. However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index: lan743x_ptp_io_event_clock_get(..., u8 channel,...) { ... /* Update Local timestamp */ extts = &ptp->extts[channel]; extts->ts.tv_sec = sec; ... } To avoid an out-of-bounds write and utilize all the supported GPIO inputs, set LAN743X_PTP_N_EXTTS to 8. Detected using the static analysis tool - Svace.
CVE-2025-38182 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: calipso: Fix null-ptr-deref in calipso_req_{set,del}attr(). syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netf ---truncated---
In the Linux kernel, the following vulnerability has been resolved: net: atm: fix /proc/net/atm/lec handling /proc/net/atm/lec must ensure safety against dev_lec[] changes. It appears it had dev_put() calls without prior dev_hold(), leading to imbalance and UAF.
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix max_sge overflow in smb_extract_folioq_to_rdma() This fixes the following problem: [ 749.901015] [ T8673] run fstests cifs/001 at 2025-06-17 09:40:30 [ 750.346409] [ T9870] ================================================================== [ 750.346814] [ T9870] BUG: KASAN: slab-out-of-bounds in smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.347330] [ T9870] Write of size 8 at addr ffff888011082890 by task xfs_io/9870 [ 750.347705] [ T9870] [ 750.348077] [ T9870] CPU: 0 UID: 0 PID: 9870 Comm: xfs_io Kdump: loaded Not tainted 6.16.0-rc2-metze.02+ #1 PREEMPT(voluntary) [ 750.348082] [ T9870] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 750.348085] [ T9870] Call Trace: [ 750.348086] [ T9870] <TASK> [ 750.348088] [ T9870] dump_stack_lvl+0x76/0xa0 [ 750.348106] [ T9870] print_report+0xd1/0x640 [ 750.348116] [ T9870] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 750.348120] [ T9870] ? kasan_complete_mode_report_info+0x26/0x210 [ 750.348124] [ T9870] kasan_report+0xe7/0x130 [ 750.348128] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348262] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348377] [ T9870] __asan_report_store8_noabort+0x17/0x30 [ 750.348381] [ T9870] smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348496] [ T9870] smbd_post_send_iter+0x1990/0x3070 [cifs] [ 750.348625] [ T9870] ? __pfx_smbd_post_send_iter+0x10/0x10 [cifs] [ 750.348741] [ T9870] ? update_stack_state+0x2a0/0x670 [ 750.348749] [ T9870] ? cifs_flush+0x153/0x320 [cifs] [ 750.348870] [ T9870] ? cifs_flush+0x153/0x320 [cifs] [ 750.348990] [ T9870] ? update_stack_state+0x2a0/0x670 [ 750.348995] [ T9870] smbd_send+0x58c/0x9c0 [cifs] [ 750.349117] [ T9870] ? __pfx_smbd_send+0x10/0x10 [cifs] [ 750.349231] [ T9870] ? unwind_get_return_address+0x65/0xb0 [ 750.349235] [ T9870] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 750.349242] [ T9870] ? arch_stack_walk+0xa7/0x100 [ 750.349250] [ T9870] ? stack_trace_save+0x92/0xd0 [ 750.349254] [ T9870] __smb_send_rqst+0x931/0xec0 [cifs] [ 750.349374] [ T9870] ? kernel_text_address+0x173/0x190 [ 750.349379] [ T9870] ? kasan_save_stack+0x39/0x70 [ 750.349382] [ T9870] ? kasan_save_track+0x18/0x70 [ 750.349385] [ T9870] ? __kasan_slab_alloc+0x9d/0xa0 [ 750.349389] [ T9870] ? __pfx___smb_send_rqst+0x10/0x10 [cifs] [ 750.349508] [ T9870] ? smb2_mid_entry_alloc+0xb4/0x7e0 [cifs] [ 750.349626] [ T9870] ? cifs_call_async+0x277/0xb00 [cifs] [ 750.349746] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs] [ 750.349867] [ T9870] ? netfs_do_issue_write+0xc2/0x340 [netfs] [ 750.349900] [ T9870] ? netfs_advance_write+0x45b/0x1270 [netfs] [ 750.349929] [ T9870] ? netfs_write_folio+0xd6c/0x1be0 [netfs] [ 750.349958] [ T9870] ? netfs_writepages+0x2e9/0xa80 [netfs] [ 750.349987] [ T9870] ? do_writepages+0x21f/0x590 [ 750.349993] [ T9870] ? filemap_fdatawrite_wbc+0xe1/0x140 [ 750.349997] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 750.350002] [ T9870] smb_send_rqst+0x22e/0x2f0 [cifs] [ 750.350131] [ T9870] ? __pfx_smb_send_rqst+0x10/0x10 [cifs] [ 750.350255] [ T9870] ? local_clock_noinstr+0xe/0xd0 [ 750.350261] [ T9870] ? kasan_save_alloc_info+0x37/0x60 [ 750.350268] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.350271] [ T9870] ? _raw_spin_lock+0x81/0xf0 [ 750.350275] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.350278] [ T9870] ? smb2_setup_async_request+0x293/0x580 [cifs] [ 750.350398] [ T9870] cifs_call_async+0x477/0xb00 [cifs] [ 750.350518] [ T9870] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs] [ 750.350636] [ T9870] ? __pfx_cifs_call_async+0x10/0x10 [cifs] [ 750.350756] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.350760] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.350763] [ T98 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: sch_hfsc: make hfsc_qlen_notify() idempotent hfsc_qlen_notify() is not idempotent either and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life: 1. update_vf() decreases cl->cl_nactive, so we can check whether it is non-zero before calling it. 2. eltree_remove() always removes RB node cl->el_node, but we can use RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe.
In the Linux kernel, the following vulnerability has been resolved: binder: fix use-after-free in binderfs_evict_inode() Running 'stress-ng --binderfs 16 --timeout 300' under KASAN-enabled kernel, I've noticed the following: BUG: KASAN: slab-use-after-free in binderfs_evict_inode+0x1de/0x2d0 Write of size 8 at addr ffff88807379bc08 by task stress-ng-binde/1699 CPU: 0 UID: 0 PID: 1699 Comm: stress-ng-binde Not tainted 6.14.0-rc7-g586de92313fc-dirty #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1c2/0x2a0 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 print_report+0x155/0x840 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 ? __phys_addr+0xba/0x170 ? binderfs_evict_inode+0x1de/0x2d0 kasan_report+0x147/0x180 ? binderfs_evict_inode+0x1de/0x2d0 binderfs_evict_inode+0x1de/0x2d0 ? __pfx_binderfs_evict_inode+0x10/0x10 evict+0x524/0x9f0 ? __pfx_lock_release+0x10/0x10 ? __pfx_evict+0x10/0x10 ? do_raw_spin_unlock+0x4d/0x210 ? _raw_spin_unlock+0x28/0x50 ? iput+0x697/0x9b0 __dentry_kill+0x209/0x660 ? shrink_kill+0x8d/0x2c0 shrink_kill+0xa9/0x2c0 shrink_dentry_list+0x2e0/0x5e0 shrink_dcache_parent+0xa2/0x2c0 ? __pfx_shrink_dcache_parent+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 do_one_tree+0x23/0xe0 shrink_dcache_for_umount+0xa0/0x170 generic_shutdown_super+0x67/0x390 kill_litter_super+0x76/0xb0 binderfs_kill_super+0x44/0x90 deactivate_locked_super+0xb9/0x130 cleanup_mnt+0x422/0x4c0 ? lockdep_hardirqs_on+0x9d/0x150 task_work_run+0x1d2/0x260 ? __pfx_task_work_run+0x10/0x10 resume_user_mode_work+0x52/0x60 syscall_exit_to_user_mode+0x9a/0x120 do_syscall_64+0x103/0x210 ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0xcac57b Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 RSP: 002b:00007ffecf4226a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007ffecf422720 RCX: 0000000000cac57b RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffecf422850 RBP: 00007ffecf422850 R08: 0000000028d06ab1 R09: 7fffffffffffffff R10: 3fffffffffffffff R11: 0000000000000246 R12: 00007ffecf422718 R13: 00007ffecf422710 R14: 00007f478f87b658 R15: 00007ffecf422830 </TASK> Allocated by task 1705: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x213/0x3e0 binderfs_binder_device_create+0x183/0xa80 binder_ctl_ioctl+0x138/0x190 __x64_sys_ioctl+0x120/0x1b0 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1705: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x46/0x50 __kasan_slab_free+0x62/0x70 kfree+0x194/0x440 evict+0x524/0x9f0 do_unlinkat+0x390/0x5b0 __x64_sys_unlink+0x47/0x50 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f This 'stress-ng' workload causes the concurrent deletions from 'binder_devices' and so requires full-featured synchronization to prevent list corruption. I've found this issue independently but pretty sure that syzbot did the same, so Reported-by: and Closes: should be applicable here as well.
In the Linux kernel, the following vulnerability has been resolved: binder: fix yet another UAF in binder_devices Commit e77aff5528a18 ("binderfs: fix use-after-free in binder_devices") addressed a use-after-free where devices could be released without first being removed from the binder_devices list. However, there is a similar path in binder_free_proc() that was missed: ================================================================== BUG: KASAN: slab-use-after-free in binder_remove_device+0xd4/0x100 Write of size 8 at addr ffff0000c773b900 by task umount/467 CPU: 12 UID: 0 PID: 467 Comm: umount Not tainted 6.15.0-rc7-00138-g57483a362741 #9 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_remove_device+0xd4/0x100 binderfs_evict_inode+0x230/0x2f0 evict+0x25c/0x5dc iput+0x304/0x480 dentry_unlink_inode+0x208/0x46c __dentry_kill+0x154/0x530 [...] Allocated by task 463: __kmalloc_cache_noprof+0x13c/0x324 binderfs_binder_device_create.isra.0+0x138/0xa60 binder_ctl_ioctl+0x1ac/0x230 [...] Freed by task 215: kfree+0x184/0x31c binder_proc_dec_tmpref+0x33c/0x4ac binder_deferred_func+0xc10/0x1108 process_one_work+0x520/0xba4 [...] ================================================================== Call binder_remove_device() within binder_free_proc() to ensure the device is removed from the binder_devices list before being kfreed.
In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Do not double dequeue a configuration request Some of our devices crash in tb_cfg_request_dequeue(): general protection fault, probably for non-canonical address 0xdead000000000122 CPU: 6 PID: 91007 Comm: kworker/6:2 Tainted: G U W 6.6.65 RIP: 0010:tb_cfg_request_dequeue+0x2d/0xa0 Call Trace: <TASK> ? tb_cfg_request_dequeue+0x2d/0xa0 tb_cfg_request_work+0x33/0x80 worker_thread+0x386/0x8f0 kthread+0xed/0x110 ret_from_fork+0x38/0x50 ret_from_fork_asm+0x1b/0x30 The circumstances are unclear, however, the theory is that tb_cfg_request_work() can be scheduled twice for a request: first time via frame.callback from ring_work() and second time from tb_cfg_request(). Both times kworkers will execute tb_cfg_request_dequeue(), which results in double list_del() from the ctl->request_queue (the list poison deference hints at it: 0xdead000000000122). Do not dequeue requests that don't have TB_CFG_REQUEST_ACTIVE bit set.
CVE-2025-38173 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: erofs: avoid using multiple devices with different type For multiple devices, both primary and extra devices should be the same type. `erofs_init_device` has already guaranteed that if the primary is a file-backed device, extra devices should also be regular files. However, if the primary is a block device while the extra device is a file-backed device, `erofs_init_device` will get an ENOTBLK, which is not treated as an error in `erofs_fc_get_tree`, and that leads to an UAF: erofs_fc_get_tree get_tree_bdev_flags(erofs_fc_fill_super) erofs_read_superblock erofs_init_device // sbi->dif0 is not inited yet, // return -ENOTBLK deactivate_locked_super free(sbi) if (err is -ENOTBLK) sbi->dif0.file = filp_open() // sbi UAF So if -ENOTBLK is hitted in `erofs_init_device`, it means the primary device must be a block device, and the extra device is not a block device. The error can be converted to -EINVAL.
In the Linux kernel, the following vulnerability has been resolved: power: supply: max77705: Fix workqueue error handling in probe The create_singlethread_workqueue() doesn't return error pointers, it returns NULL. Also cleanup the workqueue on the error paths.
CVE-2025-38170 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38169 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
A remote code execution vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: handle hdr_first_de() return value The hdr_first_de() function returns a pointer to a struct NTFS_DE. This pointer may be NULL. To handle the NULL error effectively, it is important to implement an error handler. This will help manage potential errors consistently. Additionally, error handling for the return value already exists at other points where this function is called. Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVE-2025-38166 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix panic when calling skb_linearize The panic can be reproduced by executing the command: ./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --rx-strp 100000 Then a kernel panic was captured: ''' [ 657.460555] kernel BUG at net/core/skbuff.c:2178! [ 657.462680] Tainted: [W]=WARN [ 657.463287] Workqueue: events sk_psock_backlog ... [ 657.469610] <TASK> [ 657.469738] ? die+0x36/0x90 [ 657.469916] ? do_trap+0x1d0/0x270 [ 657.470118] ? pskb_expand_head+0x612/0xf40 [ 657.470376] ? pskb_expand_head+0x612/0xf40 [ 657.470620] ? do_error_trap+0xa3/0x170 [ 657.470846] ? pskb_expand_head+0x612/0xf40 [ 657.471092] ? handle_invalid_op+0x2c/0x40 [ 657.471335] ? pskb_expand_head+0x612/0xf40 [ 657.471579] ? exc_invalid_op+0x2d/0x40 [ 657.471805] ? asm_exc_invalid_op+0x1a/0x20 [ 657.472052] ? pskb_expand_head+0xd1/0xf40 [ 657.472292] ? pskb_expand_head+0x612/0xf40 [ 657.472540] ? lock_acquire+0x18f/0x4e0 [ 657.472766] ? find_held_lock+0x2d/0x110 [ 657.472999] ? __pfx_pskb_expand_head+0x10/0x10 [ 657.473263] ? __kmalloc_cache_noprof+0x5b/0x470 [ 657.473537] ? __pfx___lock_release.isra.0+0x10/0x10 [ 657.473826] __pskb_pull_tail+0xfd/0x1d20 [ 657.474062] ? __kasan_slab_alloc+0x4e/0x90 [ 657.474707] sk_psock_skb_ingress_enqueue+0x3bf/0x510 [ 657.475392] ? __kasan_kmalloc+0xaa/0xb0 [ 657.476010] sk_psock_backlog+0x5cf/0xd70 [ 657.476637] process_one_work+0x858/0x1a20 ''' The panic originates from the assertion BUG_ON(skb_shared(skb)) in skb_linearize(). A previous commit(see Fixes tag) introduced skb_get() to avoid race conditions between skb operations in the backlog and skb release in the recvmsg path. However, this caused the panic to always occur when skb_linearize is executed. The "--rx-strp 100000" parameter forces the RX path to use the strparser module which aggregates data until it reaches 100KB before calling sockmap logic. The 100KB payload exceeds MAX_MSG_FRAGS, triggering skb_linearize. To fix this issue, just move skb_get into sk_psock_skb_ingress_enqueue. ''' sk_psock_backlog: sk_psock_handle_skb skb_get(skb) <== we move it into 'sk_psock_skb_ingress_enqueue' sk_psock_skb_ingress____________ ↓ | | → sk_psock_skb_ingress_self | sk_psock_skb_ingress_enqueue sk_psock_verdict_apply_________________↑ skb_linearize ''' Note that for verdict_apply path, the skb_get operation is unnecessary so we add 'take_ref' param to control it's behavior.
CVE-2025-38164 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on sbi->total_valid_block_count syzbot reported a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/f2fs.h:2521! RIP: 0010:dec_valid_block_count+0x3b2/0x3c0 fs/f2fs/f2fs.h:2521 Call Trace: f2fs_truncate_data_blocks_range+0xc8c/0x11a0 fs/f2fs/file.c:695 truncate_dnode+0x417/0x740 fs/f2fs/node.c:973 truncate_nodes+0x3ec/0xf50 fs/f2fs/node.c:1014 f2fs_truncate_inode_blocks+0x8e3/0x1370 fs/f2fs/node.c:1197 f2fs_do_truncate_blocks+0x840/0x12b0 fs/f2fs/file.c:810 f2fs_truncate_blocks+0x10d/0x300 fs/f2fs/file.c:838 f2fs_truncate+0x417/0x720 fs/f2fs/file.c:888 f2fs_setattr+0xc4f/0x12f0 fs/f2fs/file.c:1112 notify_change+0xbca/0xe90 fs/attr.c:552 do_truncate+0x222/0x310 fs/open.c:65 handle_truncate fs/namei.c:3466 [inline] do_open fs/namei.c:3849 [inline] path_openat+0x2e4f/0x35d0 fs/namei.c:4004 do_filp_open+0x284/0x4e0 fs/namei.c:4031 do_sys_openat2+0x12b/0x1d0 fs/open.c:1429 do_sys_open fs/open.c:1444 [inline] __do_sys_creat fs/open.c:1522 [inline] __se_sys_creat fs/open.c:1516 [inline] __x64_sys_creat+0x124/0x170 fs/open.c:1516 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/syscall_64.c:94 The reason is: in fuzzed image, sbi->total_valid_block_count is inconsistent w/ mapped blocks indexed by inode, so, we should not trigger panic for such case, instead, let's print log and set fsck flag.