Linux
Monthly
In the Linux kernel, the following vulnerability has been resolved: fpga: dfl: add bounds check in dfh_get_param_size() dfh_get_param_size() can return a parameter size larger than the feature region because the loop bounds check is evaluated before incrementing size. If the EOP (End of Parameters) bit is set in the same iteration, the inflated size is returned without re-validation against max. This can cause create_feature_instance() to call memcpy_fromio() with a size exceeding the ioremap'd region when a malicious FPGA device provides crafted DFHv1 parameter headers. Add a bounds check after the size increment to ensure the accumulated size never exceeds the feature boundary.
In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL.
In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: swp: Improve locking user experience In the case of the first block being locked (or the few first blocks), if the user want to fully unlock the device it has two possibilities: - either it asks to unlock the entire device, and this works; - or it asks to unlock just the block(s) that are currently locked, which fails. It fails because the conditions "can_be_top" and "can_be_bottom" are true. Indeed, in this case, we unlock everything, so the TB bit does not matter. However in the current implementation, use_top would be true (as this is the favourite option) and lock_len, which in practice should be reduced down to 0, is set to "nor->params->size - (ofs + len)" which is a positive number. This is wrong. An easy way is to simply add an extra condition. In the unlock() path, if we can achieve the same result from both sides, it means we unlock everything and lock_len must simply be 0. A comment is added to clarify that logic.
In the Linux kernel, the following vulnerability has been resolved: irqchip/crossbar: Use correct index in crossbar_domain_free() crossbar_domain_free() resets the domain data and then uses the nulled out irq_data->hwirq member as index to reset the irq_map[] entry and to write the relevant crossbar register with a safe entry. That means it never frees the correct index and keeps the crossbar register connection to the source interrupt active. If it would not reset the domain data, then this would be even worse as irq_data->hwirq holds the source interrupt number, but both the map and register index need the corresponding GIC SPI number and not the source interrupt number. This might even result in an out of bounds access as the source interrupt number can be higher than the maximal index space. Fix this by using the GIC SPI index from the parent domain's irq_data.
In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_tis_spi: Use wait_woken() in wait_for_tmp_stat() wait_event_interruptible_timeout() evaluates its condition after setting the current task state to TASK_INTERRUPTIBLE. With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait path is used: tpm_tis_status() tpm_tis_spi_read_bytes() tpm_tis_spi_transfer_full() spi_bus_lock() mutex_lock() Address this with the following measures: 1. Call wait_tpm_stat_cond() only while tasking is running. 2. Use wait_woken() to wait for changes.
In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix uninitialized xprt_create_args structure The xprt_create_args structure is allocated on the stack without initialization in rpc_sysfs_xprt_switch_add_xprt_store(). While some fields are manually populated, critical fields like srcaddr, bc_xps, and flags contain uninitialized stack garbage. This can lead to: 1. Kernel panic when xs_setup_xprt() dereferences garbage srcaddr 2. Information leak if srcaddr points to sensitive stack data 3. Unpredictable behavior if flags has random bits set The fix is to zero-initialize the structure to ensure all unused fields are NULL/0, preventing the transport setup code from acting on garbage data.
In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma-pcie: Reject devices without driver data dw_edma_pcie_probe() treats the PCI device ID driver_data as the template for the controller layout and copies it unconditionally. A device bound dynamically via sysfs can match the driver without that data, which leads to a NULL pointer dereference. Reject such matches before enabling the device.
In the Linux kernel, the following vulnerability has been resolved: platform/x86/intel/tpmi: use cleanup helpers in mem_write() In mem_write(), the temporary array returned by parse_int_array_user() must be released on all exit paths. Convert the array variable to use cleanup.h scope-based cleanup so it is freed automatically on return. This also moves the array declaration next to parse_int_array_user() as required by cleanup.h usage guidelines.
In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (atomic) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic (polling) path rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle for this i2c controller. Reading I2DR to obtain the count likewise arms the next byte on the count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly and left the bus held. Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so the existing last-byte handling emits STOP; the dummy byte is discarded. A count of 0 is a valid empty block read; a count above I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus has been released. The interrupt-driven path has the same flaw from a later commit and is fixed separately, as it carries a different Fixes: tag and stable range.
In the Linux kernel, the following vulnerability has been resolved: i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource() If devm_platform_get_and_ioremap_resource() returns an error, mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to get the error code. This results in a use-after-free. Save the error code before freeing tmp_res.
In the Linux kernel, the following vulnerability has been resolved: xen/gntdev: fix error handling in ioctl When gntdev_ioctl_map_grant_ref() fails to copy the operation result back to userspace after successfully adding the mapping to the list, the error path returns -EFAULT without releasing the reference acquired by gntdev_alloc_map(). The mapping remains in priv->maps with a refcount of 1, causing a memory leak and a dangling list entry. Additionally, gntdev_add_map() may modify map->index to avoid overlap with existing mappings. Therefore, the index returned to userspace must be obtained after gntdev_add_map() completes. Fix this by holding the mutex across gntdev_add_map(), retrieving the correct index, and copy_to_user(). If copy_to_user() fails, remove the mapping from the list and release the reference while still holding the lock. Fix these issues by properly handling all error cases.
In the Linux kernel, the following vulnerability has been resolved: NFS: Charge unstable writes by request size, not folio size nfs_folio_mark_unstable() and nfs_folio_clear_commit() charge and uncharge NR_WRITEBACK/WB_WRITEBACK by folio_nr_pages(folio) once per *request* added to or removed from a commit list. This is correct only when a folio has a single associated request. When pg_test splits a folio into N sub-folio requests (e.g. pNFS flexfiles striping with a stripe unit smaller than the folio size, or plain wsize-limited splitting), each of the N requests independently charges the whole folio's page count, inflating the accounting by a factor of N per folio. With large folios and small stripe units this reaches multiple orders of magnitude: a 2 MiB folio split into 512 4 KiB requests can charge up to 512x its real size, pushing global dirty+writeback accounting past the system's dirty threshold and forcing every buffered writer on the host into the hard-throttle path, including unrelated in-kernel NFS server threads sharing the box. Charge each request only for the pages it actually covers.
In the Linux kernel, the following vulnerability has been resolved: nvme-apple: Prevent shared tags across queues on Apple A11 On Apple A11, tags of pending commands must be unique across the admin and IO queues, else the firmware crashes with "duplicate tag error for tag N", with N being the tag. Apply the existing workaround for M1 of reserving two tags for the admin queue to A11.
In the Linux kernel, the following vulnerability has been resolved: nvmet: fix refcount leak in nvmet_sq_create() In nvmet_sq_create(), a reference on the ctrl is taken via kref_get_unless_zero() before calling nvmet_check_sqid(). If nvmet_check_sqid() fails, the function returns the error directly without releasing the reference, leading to a leak. Fix this by jumping to the "ctrl_put" label, which already performs the necessary nvmet_ctrl_put(ctrl). This ensures the reference is properly released on this error path.
In the Linux kernel, the following vulnerability has been resolved: netdev-genl: report NAPI thread PID in the caller's pid namespace netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID using task_pid_nr(), which returns the PID in the initial pid namespace. NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family is netnsok, so a caller in a child pid namespace can issue it. That caller then sees the kthread's global PID, even though the kthread is not visible in its pid namespace, where the value should be 0. Translate the PID through the caller's pid namespace, the same way commit 3799c2570982 ("io_uring/fdinfo: translate SqThread PID through caller's pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both run synchronously in the caller's context, so task_active_pid_ns(current) is the caller's pid namespace.
In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix CAN frame rx/tx statistics KCSAN detected a data race within the bcm_rx_handler() when two CAN frames have been simultaneously received and processed in a single rx op by two different CPUs. Use atomic operations with (signed) long data types to access the statistics in the hot path to fix the KCSAN complaint. Additionally simplify the update and check of statistics overflow by using the atomic operations in separate bcm_update_[rx|tx]_stats() functions. The rx variant runs under bcm_rx_update_lock to prevent races when resetting the two rx counters; the tx variant runs under bcm_tx_lock and only needs to guard its own counter's overflow. As the rx path resets its values already at LONG_MAX / 100, there is no conflict between the two locking domains (bcm_rx_update_lock vs. bcm_tx_lock) even for ops that use both paths. The rx statistics update and the frames_filtered update in bcm_rx_changed() were previously performed in two separate bcm_rx_update_lock sections. For an rx op subscribed on all interfaces (ifindex == 0), bcm_rx_handler() can run concurrently on different CPUs, so a counter reset by one CPU between these two sections could leave frames_filtered larger than frames_abs on another CPU, producing a bogus (even negative) reduction percentage in procfs. Update the statistics in the same critical section as bcm_rx_changed() to close this gap, which also removes the now unneeded extra lock/unlock pair around the traffic_flags calculation.
In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler() For an rx op subscribed on all interfaces (ifindex == 0), the same op is registered once in the shared per-netns wildcard filter list, so bcm_rx_handler() can run concurrently on different CPUs for frames arriving on different net devices. op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was taken, allowing concurrent writers to race each other - including a torn store of the 64-bit rx_stamp on 32-bit platforms. Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex of the very same frame whose content it is delivering. So the assignment is placed in the same unbroken bcm_rx_update_lock section as the content comparison. As a side effect, the RTR-request frame feature (which never reach bcm_send_to_user()) no longer updates rx_stamp/rx_ifindex, since only the notification path needs them.
In the Linux kernel, the following vulnerability has been resolved: dm-ioctl: fix a possible overflow in list_version_get_info sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the output buffer - info->vers->version[0], info->vers->version[1], info->vers->version[2] and info->vers->next. This can cause buffer overflow. Fix this buffer overflow by replacing "sizeof(tt->version)" with "sizeof(struct dm_target_versions)".
In the Linux kernel, the following vulnerability has been resolved: dm-pcache: reject option groups without values The pcache target parses optional arguments as name/value pairs. A table that advertises one optional argument and supplies only a recognized option name, for example "cache_mode", reaches parse_cache_opts() with argc == 1. The parser consumes the name, decrements argc to zero, then calls dm_shift_arg() again for the value. dm_shift_arg() returns NULL when no arguments remain, and the following strcmp() dereferences that NULL pointer. Check that each recognized option has a value before consuming it. This keeps valid "cache_mode writeback" and "data_crc true/false" tables unchanged while making malformed tables fail during target construction with a precise missing-value error.
In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix leaking uninitialized kernel memory If hash size is less than device's tuple size, dm-integrity is supposed to zero the remaining space. There was a bug in the code that zeroing didn't work. This commit fixes it.
In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix a possible NULL pointer dereference Fix a possible NULL pointer dereference dm_verity_loadpin_is_bdev_trusted if the device has no table.
In the Linux kernel, the following vulnerability has been resolved: dm-verity: make error counter atomic The error counter "v->corrupted_errs" was not atomic, thus it could be subject to race conditions. The call to dm_audit_log_target("max-corrupted-errors") may be skipped due to the races.
In the Linux kernel, the following vulnerability has been resolved: dma-buf: dma-fence: Fix potential NULL pointer dereference The commit mentioned in the fixes tag below introduced a mechanism through which fence producers can fully decouple from fence consumers. This, desirable, mechanism is based on the fence's signaled-bit as the "decoupling point". A sophisticated interaction between RCU and atomic instructions attempts to ensure that fence consumers can still interact with fence producers through the dma_fence_ops (callback pointers into the producer). This is the desired behavior: to check for decoupling, the signaled-bit is first checked. If it's not yet signaled, RCU ensures that the ops pointer cannot yet be NULL. Hereby, dma_fence_signal_timestamp_locked() first sets the signaled-bit, and then sets the ops pointer to NULL. Readers first load the ops pointer, and then check through the signaled-bit whether the pointer can legally be accessed. These set and load operations could occur out of order on weakly ordered platforms. This problem can be solved very elegantly by using the ops pointer itself as the synchronization point. The pointer is either NULL, or cannot become NULL while it is being used thanks to RCU. Replace the signaled-bit check in dma_fence_timeline_name() and dma_fence_driver_name().
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject command submission on devices without a submit op amdxdna_cmd_submit() calls xdna->dev_info->ops->cmd_submit() unconditionally, but only aie2_dev_ops defines that callback. aie4_vf_ops (the AIE4 SR-IOV virtual function) does not, so a user AMDXDNA_EXEC_CMD ioctl on an AIE4 device reaches a NULL function-pointer call and oopses the kernel. AIE4 submits work through a mapped user queue and doorbell, not this ioctl path. Reject the submission early with -EOPNOTSUPP when the device provides no cmd_submit op, so the shared EXEC ioctl is a clean no-op on such devices. Found by 0sec automated security-research tooling (https://0sec.ai).
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject user command submission without a command BO amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is skipped, leaving it NULL, and no check rejects it on the user path (the !job->cmd_bo guard lives inside the != INVALID branch). The job is then armed and pushed to the DRM scheduler. aie2_sched_job_run() takes the drv_cmd == NULL path and calls amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) -> to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker. A process with access to the accel node on a system with a probed AMD NPU can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl (cmd_handles = 0). Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO) legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd. Reject the invalid handle for user submissions (drv_cmd == NULL) at the submit choke point so every user path is covered. Found by 0sec automated security-research tooling (https://0sec.ai).
In the Linux kernel, the following vulnerability has been resolved: scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path If phys_disk->in_reset is set, the function returns directly without undoing the resources acquired for the command. Add the missing error cleanup by unmapping the IOACCEL2 SG chain block when needed, unmapping the SCSI command, and dropping the outstanding IOACCEL command count before returning.
In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup() The memory allocated for mboxq using mempool_alloc() is not freed in some of the early exit error paths. Fix that by moving the mempool_free() call to an earlier point after last use.
In the Linux kernel, the following vulnerability has been resolved: scsi: xen: scsiback: Free the command tag on the TMR submit-failure path scsiback_device_action() obtains a command tag in scsiback_get_pend_req() and submits a task-management request with target_submit_tmr(). When target_submit_tmr() fails it returns < 0 and scsiback jumps to the err: label, which sends a response but frees nothing, leaking the tag. Impact: a pvSCSI guest can leak the command tags of a LUN's session, stopping the LUN, by issuing VSCSIIF_ACT_SCSI_ABORT or RESET requests whenever target_submit_tmr() fails. transport_generic_free_cmd() cannot be used here. By the time target_submit_tmr() returns an error it has already run __target_init_cmd() (so se_cmd->cmd_kref is one, not zero), and on its target_get_sess_cmd() error path it has freed se_cmd->se_tmr_req via core_tmr_release_req() while leaving SCF_SCSI_TMR_CDB set and the pointer dangling. Letting the command release run target_free_cmd_mem() would then double-free se_tmr_req. Use the same helper, which returns just the tag, on this path too.
In the Linux kernel, the following vulnerability has been resolved: scsi: elx: efct: Fix refcount leak in efct_hw_io_abort() When efct_hw_reqtag_alloc() fails in efct_hw_io_abort(), the error path returns -ENOSPC without releasing the reference obtained via kref_get_unless_zero() earlier in the function. All other error paths correctly drop the reference. This causes a permanent reference leak on the io_to_abort object. Additionally, the abort_in_progress flag is left set to true on this path, which means future abort attempts for the same I/O will immediately return -EINPROGRESS even though the abort was never submitted, effectively blocking recovery. Fix this by adding the missing kref_put() call and reset abort_in_progress to false, matching the cleanup done in the efct_hw_wq_write() failure path below.
In the Linux kernel, the following vulnerability has been resolved: scsi: elx: efct: Fix I/O leak on unsupported additional CDB efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an unsolicited FCP command. If the command has an unsupported additional CDB, the function returns -EIO before handing the IO to the SCSI layer. Free the allocated IO before returning from this error path.
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix use-after-free and double-free in disconnect ims_pcu_disconnect() only intended to perform cleanup when the primary (control) interface is unbound. However, it currently relies on the interface class to distinguish between control and data interfaces. A malicious device could present a data interface with the same class as the control interface, leading to premature cleanup and potential use-after-free or double-free. Switch to verifying that the interface being disconnected is indeed the control interface.
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - validate control endpoint type The driver currently assumes that the first endpoint of the control interface is an interrupt IN endpoint without verifying it. A malicious device could provide a different endpoint type, which would then be passed to usb_fill_int_urb(), potentially leading to kernel warnings or undefined behavior. Verify that the control endpoint is an interrupt IN endpoint.
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix firmware leak in async update The firmware object was not being released if validation failed. Use __free(firmware) to ensure the firmware is always released.
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix out-of-bounds read in ims_pcu_irq() debug logging The debug logging in ims_pcu_irq() unconditionally prints data from pcu->urb_in_buf. However, if the interrupt fired for pcu->urb_ctrl, the actual data resides in pcu->urb_ctrl_buf. If urb->actual_length for the control URB exceeds pcu->max_in_size, this leads to an out-of-bounds read. Fix this by printing from the correct buffer associated with the URB.
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix race condition in reset_device sysfs callback The ims_pcu_reset_device() sysfs callback calls ims_pcu_execute_command() without acquiring pcu->cmd_mutex. This can lead to data races and corruption of the shared command buffer if triggered concurrently with other commands. Acquire pcu->cmd_mutex before calling ims_pcu_execute_command().
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix type confusion in CDC union descriptor parsing The driver currently trusts the bMasterInterface0 from the CDC union descriptor without verifying that it matches the interface being probed. This could lead to the driver overwriting the private data of another interface. Validate that the control interface found in the descriptor is indeed the one we are probing.
In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix use-after-free on probe failure The vub300 driver lifetime-manages its controller state using vub300->kref, with vub300_delete() freeing the mmc host when the last reference is dropped. The probe error path after the inactivity timer has been armed still bypasses that lifetime rule, however, and falls through to mmc_free_host() directly if mmc_add_host() fails. The race window is between arming the inactivity timer and reaching the probe error unwind after mmc_add_host() fails: probe thread timer/workqueue ------------ --------------- kref_init(&vub300->kref) ref = 1 kref_get(&vub300->kref) ref = 2, timer ref add_timer(inactivity_timer) fires after one second | | race window |<----------------------------------------------------> | mmc_add_host(mmc) inactivity timer fires vub300_queue_dead_work() kref_get() ref = 3 queue_work(deadwork) mmc_add_host() fails timer_delete_sync() mmc_free_host(mmc) frees vub300 deadwork runs use-after-free The inactivity timeout is one second, so this would require mmc_add_host() to both fail and take more than one second to do so. This is unlikely to happen in practice, but the error path is still wrong. timer_delete_sync() only waits for the timer callback itself. It does not flush deadwork that the callback may already have queued. As a result, queued deadwork can still hold a kref while the probe error path directly frees the backing mmc host, including the vub300 storage. Fix this by using the same lifetime mechanism as disconnect. Clear vub300->interface so that the timer callback and any queued deadwork return early and drop their references, then drop the initial probe reference and return without falling through to err_free_host.
In the Linux kernel, the following vulnerability has been resolved: wifi: libertas_tf: fix use-after-free in lbtf_free_adapter() lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does not wait for a running command_timer_fn() callback. lbtf_free_adapter() runs on the teardown path right before ieee80211_free_hw() frees priv, both in lbtf_remove_card() and in the probe error path. command_timer is armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent. command_timer_fn() dereferences priv. If a command times out as the device is removed, command_timer_fn() runs concurrently with teardown and dereferences priv after it has been freed. This is the same use-after-free that commit 03cc8f90d053 ("wifi: libertas: fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas driver. The libertas_tf variant has the identical pattern and was left unchanged. Use timer_delete_sync() so any in-flight callback completes before priv is freed.
In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Use u64 multiplication in update_rlimit_cpu() update_rlimit_cpu() converts the RLIMIT_CPU value to nanoseconds with u64 nsecs = rlim_new * NSEC_PER_SEC; On 32-bit kernels both rlim_new (unsigned long) and NSEC_PER_SEC (1000000000L) are 32-bit, so the multiplication is performed in unsigned long and truncated for rlim_new > 4 seconds before being widened to u64. The same file already casts to u64 for the matching computation in check_process_timers(): u64 softns = (u64)soft * NSEC_PER_SEC; As a result, the truncated value is installed into the CPUCLOCK_PROF expiry cache (nextevt), causing the process CPU timer to be programmed to fire prematurely for any RLIMIT_CPU soft limit >= 5 seconds. The actual SIGXCPU/SIGKILL decision in check_process_timers() already casts to u64 and is therefore correct, so limit enforcement is not broken; only the expiry-cache programming is wrong. Apply the same cast here so both paths convert rlim_cur identically. 64-bit kernels are unaffected.
In the Linux kernel, the following vulnerability has been resolved: gpio: tegra: do not call pinctrl for GPIO direction tegra_gpio_direction_input() and tegra_gpio_direction_output() already program the GPIO controller direction registers directly. The additional pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl operation, because the Tegra pinmux ops provide GPIO request/free handling but no gpio_set_direction hook. The extra call still enters the pinctrl core and takes pctldev->mutex. Shared GPIO users can call the direction path while holding their per-line spinlock, so this otherwise redundant pinctrl direction call can sleep in an atomic context. This was found by our static analysis tool and then confirmed by manual review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the Tegra pinctrl ops. The reviewed path has a default non-sleeping struct gpio_chip while the direction callback still enters the pinctrl mutex path. A directed runtime validation kept the same non-sleeping chip registration and drove: gpio_shared_proxy_direction_output() gpiod_direction_output_raw_commit() tegra_gpio_direction_output() pinctrl_gpio_direction_output() Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output() on the stack. Do not mark the whole chip as can_sleep to paper over this: can_sleep describes whether get()/set() may sleep, and Tegra value access is MMIO. Remove the redundant pinctrl direction calls and keep pinctrl involvement in the existing request/free path.
In the Linux kernel, the following vulnerability has been resolved: gpio: mt7621: avoid corruption of shared interrupt trigger state The bank-shared fields like 'rising' and 'falling' are modified using non-atomic read-modify-write operations. Since every gpio chip instance represents an entire bank of 32 pins, if 'mediatek_gpio_irq_type()' is called concurrently for different IRQs on the same bank a possible overwrite of each other's configuration is possible. Thus, protect this state with 'gpio_generic_lock_irqsave' lock in the same way it is handled in irp_chip 'mediatek_gpio_irq_mask()' and 'mediatek_gpio_irq_unmask()' callbacks.
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: icssg: guard PA stat lookups icssg_ndo_get_stats64() unconditionally calls emac_get_stat_by_name() with FW PA stat names regardless of whether the PA stats block is present on the hardware. emac_get_stat_by_name() already guards the PA stats lookup with `if (emac->prueth->pa_stats)`; when that pointer is NULL the lookup falls through to netdev_err() and returns -EINVAL. Because ndo_get_stats64 is polled regularly by the networking stack this produces thousands of log entries of the form: icssg-prueth icssg1-eth end0: Invalid stats FW_RX_ERROR A secondary consequence is that the int(-EINVAL) return value is implicitly widened to a near-ULLONG_MAX unsigned value when accumulated into the __u64 fields of rtnl_link_stats64, silently corrupting the rx_errors, rx_dropped and tx_dropped counters reported by `ip -s link`. Every other PA-aware code path in the driver is already guarded with the same `if (emac->prueth->pa_stats)` check. Apply the same guard here.
In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: destroy DMA pool on CLDMA late init failure t7xx_cldma_late_init() creates md_ctrl->gpd_dmapool before initializing the TX and RX rings. If any ring initialization fails, the error path frees the already initialized rings but leaves the DMA pool allocated. Destroy md_ctrl->gpd_dmapool on the late-init failure path to avoid leaking the DMA pool.
In the Linux kernel, the following vulnerability has been resolved: net: ixp4xx_hss: fix duplicate HDLC netdev allocation ixp4xx_hss_probe() allocates two HDLC netdevs. The first one is stored in ndev, initialized, and registered with register_hdlc_device(). The second one is stored in port->netdev and later used by the remove path for unregister_hdlc_device() and free_netdev(). This means that the registered netdev is not the same object that is unregistered and freed on remove. It also leaks the first allocation if the second alloc_hdlcdev() call fails, and the first allocation is not checked before ndev is used. Older code allocated the HDLC netdev only once and stored the same object in both the local variable and port->netdev. The buggy conversion split this into two alloc_hdlcdev() calls. A later rename changed the local variable name to ndev, but the underlying mismatch remained. Fix this by allocating the HDLC netdev only once and assigning the same object to port->netdev.
In the Linux kernel, the following vulnerability has been resolved: net: ena: clean up XDP TX queues when regular TX setup fails create_queues_with_size_backoff() creates XDP TX queues before setting up the regular TX path. If the subsequent allocation or creation of regular TX queues fails, the error handling paths omit the teardown of the XDP TX queues, leading to a resource leak. Fix this by explicitly destroying the XDP TX queue subset at the two missing failure points. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have an ENA device to test with, no runtime testing was able to be performed.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Free BPID bitmap on setup failure nix_setup_bpids() allocates bp->bpids with rvu_alloc_bitmap(), which uses a plain kcalloc(). If any of the following devm_kcalloc() allocations for the BPID mapping arrays fails, the function returns without freeing the bitmap. Free the BPID bitmap before returning from those error paths.
In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix cas_ctl leak on spi_async failure ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC) and relies entirely on the SPI completion callback ca8210_spi_transfer_complete() to free it. The spi_async() API only invokes the completion callback on successful submission. On failure it returns a negative error code without ever queuing the callback, which leaves cas_ctl and its embedded spi_message and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is inside the completion callback, so there is no other reclamation path. ca8210_spi_transfer() is called from ca8210_spi_exchange(), the interrupt handler ca8210_interrupt_handler(), and from the retry path inside the completion callback itself. The exchange and interrupt handler paths loop on -EBUSY, so under sustained SPI bus contention every retry iteration leaks a fresh cas_ctl (~600 bytes per occurrence). Fix it by freeing cas_ctl on the spi_async() error path. While here, correct the misleading error string: the function calls spi_async(), not spi_sync().
In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange a kmalloc'd buffer pointer through a struct kfifo, but pass a literal '4' as the byte count to kfifo_in()/kfifo_out(). This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the low 4 bytes of the 8-byte pointer are written into the FIFO. The reader then reads back 4 bytes into an 8-byte local pointer variable, leaving the upper 4 bytes uninitialized stack data. The first dereference of the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel address and generally results in an oops. Use sizeof(fifo_buffer) so the byte count matches pointer width on every architecture. The driver has no architecture restriction in Kconfig, so any 64-bit build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has been latent since the driver was added in 2017 because it is most commonly deployed on 32-bit MCUs. Found via a custom Coccinelle semantic patch hunting for short-byte kfifo I/O on byte-mode kfifos used to shuttle pointers.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix stack buffer overflow in multichannel session-key copy Commit 4b706360ffb7 ("ksmbd: fix multichannel binding and enforce channel limit") moved the binding-path session key out of the session-wide sess->sess_key (CIFS_KEY_SIZE = 40) into a new per-channel buffer, and sized both that buffer and the on-stack copy used during binding with SMB2_NTLMV2_SESSKEY_SIZE (16): struct channel { char sess_key[SMB2_NTLMV2_SESSKEY_SIZE]; /* 16 */ ... }; ntlm_authenticate() / krb5_authenticate(): char channel_key[SMB2_NTLMV2_SESSKEY_SIZE] = {}; /* 16 */ char *auth_key = conn->binding ? channel_key : sess->sess_key; The two writers that fill this destination still bound the copy length against CIFS_KEY_SIZE (40), not against the 16-byte buffer: ksmbd_decode_ntlmssp_auth_blob() (NTLM key exchange): if (sess_key_len > CIFS_KEY_SIZE) /* 40 */ return -EINVAL; arc4_crypt(ctx_arc4, sess_key, (char *)authblob + sess_key_off, sess_key_len); ksmbd_krb5_authenticate(): if (resp->session_key_len > sizeof(sess->sess_key)) /* 40 */ ... memcpy(sess_key, resp->payload, resp->session_key_len); On a binding SESSION_SETUP, auth_key points at the 16-byte channel_key, so a client that supplies an NTLM EncryptedRandomSessionKey of up to 40 bytes (with NTLMSSP_NEGOTIATE_KEY_EXCH), or a Kerberos ticket whose session key is longer than 16 bytes (a normal AES256 key is 32), writes past the 16-byte stack buffer -- up to a 24-byte kernel stack overflow. KASAN reports it as a stack-out-of-bounds write in arc4_crypt() called from ksmbd_decode_ntlmssp_auth_blob(). The destinations must be able to hold the full session key the length checks already permit. Size the per-channel key buffer and the two on-stack channel_key buffers with CIFS_KEY_SIZE, matching sess->sess_key.
In the Linux kernel, the following vulnerability has been resolved: ipmi: fix refcount leak in i_ipmi_request() When a caller provides a `supplied_recv` message to i_ipmi_request(), the function increments the user's `nr_msgs` reference count. If an error occurs later, the out_err cleanup path only frees the recv_msg if the function allocated it itself (i.e., !supplied_recv). In the supplied_recv case the cleanup is skipped, leaving the reference count elevated. The caller ipmi_request_supply_msgs() does not release the supplied_recv on error, so the reference is permanently leaked. Fix this by explicitly reverting the reference count operations when a supplied recv_msg with a valid user pointer is present in the error path: decrement nr_msgs and drop the user's kref.
In the Linux kernel, the following vulnerability has been resolved: bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp() If the allocation of fp[i].tpa_info fails, the error path will not free the struct bnx2x_fastpath allocated earlier, as it is not linked to the bp structure yet. Fix that by linking it immediately after allocation.
In the Linux kernel, the following vulnerability has been resolved: net: liquidio: fix BAR resource leak on PF number failure If cn23xx_get_pf_num() fails, the function returns without unmapping either BAR. Unmap both BARs before returning from the error path. Found by manual code review.
In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Initialize eth_syslock spinlock before use lan743x_hardware_init() calls pci11x1x_strap_get_status() during the PCI11x1x probe sequence. That helper acquires the Ethernet subsystem hardware lock via lan743x_hs_syslock_acquire(), which relies on adapter->eth_syslock_spinlock to serialize access. The spinlock is currently initialized only after the strap status is read. With CONFIG_DEBUG_SPINLOCK enabled, taking the zeroed initialized spinlock can trip the spinlock debug check. Fix by initializing adapter->eth_syslock_spinlock before reading the strap status so the probe path never attempts to lock an uninitialized spinlock.
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix matcher leak on resize target setup failure hws_bwc_matcher_move() allocates a replacement matcher before setting it as the resize target. If mlx5hws_matcher_resize_set_target() fails, the replacement matcher is not attached anywhere and is leaked. Fix the leak by destroying the replacement matcher before returning from the resize-target failure path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have a mlx5 HWS-capable device to test with, no runtime testing was able to be performed.
In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Add NOLPM quirk for PNY CS900 1TB SSD The PNY CS900 1TB SSD (Phison PS3111-S11, DRAM-less) drops off the bus after entering Device-Initiated Slumber during idle. With the default med_power_with_dipm policy the link goes down (SStatus 1 SControl 300) and does not recover, forcing the filesystem read-only. Forcing max_performance keeps the link stable across prolonged idle. Add a NOLPM quirk so link power management is disabled for this drive specifically, leaving it intact for other devices on the host.
In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Reject an invalid concurrent positioning ranges count ata_dev_config_cpr() takes the number of range descriptors from buf[0] of the concurrent positioning ranges log (up to 255), which the device reports independently of the log size in the GPL directory. The count is then walked at a fixed 32-byte stride in two places with no bound: the log read here, and the INQUIRY VPD page B9h emitter, which writes one descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device reporting a count larger than its own log overflows the read buffer (up to 7704 bytes past a 512-byte slab), and a count above 62 overflows the response buffer on the emit side. Bound the count once, on probe, against both the log the device returned and the number of descriptors the VPD B9h response buffer can hold (ATA_DEV_MAX_CPR, derived from the rbuf size). Reject an out-of-range count with a warning; this keeps the emitter in bounds with no separate change there.
In the Linux kernel, the following vulnerability has been resolved: riscv: probes: save original sp in rethook trampoline Reading a word from the stack in a kretprobe crashes a risc-v kernel. $ cd /sys/kernel/tracing/ $ echo 'r n_tty_write $stack0' > dynamic_events $ echo 1 > events/kprobes/enable Unable to handle kernel paging request at virtual address 0000000200000128 ... [<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38 [<ffffffff80177196>] process_fetch_insn+0x3ee/0x760 [<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0 [<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58 [<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x90 [<ffffffff80180838>] rethook_trampoline_handler+0x70/0x108 [<ffffffff8001ba32>] arch_rethook_trampoline_callback+0x12/0x1c [<ffffffff8001ba84>] arch_rethook_trampoline+0x48/0x94 [<ffffffff8067872a>] tty_write+0x1a/0x30 In regs_get_kernel_stack_nth, regs->sp contains an arbitrary value. arch_rethook_trampoline saves the registers from the probed function in a struct pt_regs. sp is not saved. Instead, sp is decremented for arch_rethook_trampoline's local stack. Fix this crash and save the original sp along with the other registers. Use a0 as a temporary register, it is overwritten anyway. [pjw@kernel.org: added Fixes tag; cc'ed stable]
In the Linux kernel, the following vulnerability has been resolved: irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure imsic_early_acpi_init() allocates a firmware node before setting up the IMSIC state. If imsic_setup_state() fails, the function returns without freeing the allocated fwnode. Free the fwnode and clear the global pointer on this error path, matching the cleanup already done when imsic_early_probe() fails. [ tglx: Use a common cleanup path instead of copying code around ]
In the Linux kernel, the following vulnerability has been resolved: s390/monwriter: Reject buffer reuse with different data length When data buffers are reused, e.g. for interval sample records, the first record determines the data length, and the size of the buffer for user copy. Current monwriter code does not check if the data length was changed for subsequent records, which also would never happen for valid user programs. However, a malicious user could change the data length, resulting in out of bounds user copy to the kernel buffer, and memory corruption. By default, the monwriter misc device is created with root-only permissions, so practical impact is typically low. Fix this by checking for changed data length and rejecting such records.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix SQB pointer leak on init failure otx2_init_hw_resources() initializes SQ aura and pool resources before several later setup steps. On failure, err_free_sq_ptrs only frees SQB pages, leaving the per-SQ sqb_ptrs arrays behind. Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs even when sq->sqe has not been allocated yet. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an OcteonTX2 PF device and the corresponding AF mailbox setup to test with, no runtime testing was able to be performed.
In the Linux kernel, the following vulnerability has been resolved: llc: fix SAP refcount leak in llc_ui_autobind() llc_ui_autobind() opens a SAP after choosing a dynamic LSAP. llc_sap_open() returns a reference owned by the caller, and llc_sap_add_socket() takes a second reference for the socket's membership in the SAP hash tables. llc_ui_bind() drops the caller's reference after adding the socket, but llc_ui_autobind() keeps it. When the socket is closed, llc_sap_remove_socket() releases only the socket reference, leaving the SAP on llc_sap_list with sk_count == 0. This is user-visible because repeated autobind and close cycles can consume all dynamic SAP values and make later autobinds fail with -EUSERS. Drop the caller's reference after a successful autobind, matching llc_ui_bind()'s ownership model.
In the Linux kernel, the following vulnerability has been resolved: net: macb: drop in-flight Tx SKBs on close The MACB driver has since forever leaked the outgoing SKBs that have not yet been marked as completed. They live in queue->tx_skb which gets freed without remorse nor checking. macb_free_consistent() gets called in a few codepaths, but only close will trigger the added expressions. In macb_open() and macb_alloc_consistent() failure cases, queues' tx_skb just got allocated and are empty.
In the Linux kernel, the following vulnerability has been resolved: cpu/hotplug: Fix NULL kobject warning in cpuhp_smt_enable() On arm64, when booting with `maxcpus` greater than the number of present CPUs (e.g., QEMU -smp cpus=4,maxcpus=8), some CPUs are marked as 'present' but have not yet been registered via register_cpu(). Consequently, the per-cpu device objects for these CPUs are not yet initialized. In cpuhp_smt_enable(), the code iterates over all present CPUs. Calling _cpu_up() for these unregistered CPUs eventually leads to sysfs_create_group() being called with a NULL kobject (or a kobject without a directory), triggering the following warning in fs/sysfs/group.c: WARNING: fs/sysfs/group.c:137 at internal_create_group+0x41c/0x4bc, CPU#2: sh/181 [...] Call trace: internal_create_group+0x41c/0x4bc (P) sysfs_create_group+0x18/0x24 topology_add_dev+0x1c/0x28 cpuhp_invoke_callback+0x104/0x20c __cpuhp_invoke_callback_range+0x94/0x11c _cpu_up+0x200/0x37c When booting with ACPI, arm64 smp_prepare_cpus() currently sets all enumerated CPUs as "present" regardless of their status in the MADT. This causes issues with SMT hotplug control. For instance, with QEMU's "-smp 4,maxcpus=8" configuration, the MADT GICC entries are populated as follows: 1. The first four CPUs: `Enabled` set but `Online Capable` not set. 2. The remaining four CPUs: `Online Capable` set but `Enabled` not set to support potential hot-plugging. Fix this by: 1. When booting with ACPI, checking the ACPI_MADT_ENABLED flag in the GICC entry before calling set_cpu_present() during SMP initialization. 2. Properly managing the present mask in acpi_map_cpu() and acpi_unmap_cpu() to support actual CPU hotplug events, This aligns with other architectures like x86 and LoongArch. 3. Update the arm64 CPU hotplug documentation to no longer state that all online-capable vCPUs are marked as present by the kernel at boot time. This ensures that only physically available or explicitly enabled CPUs are in the present mask, keeping the SMT control logic consistent with the actual hardware state.
In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list A pseudo-locked group's RMID is freed when it is created. On unmount rmdir_all_sub() unconditionally frees all RMID of all groups, resulting in a double-free of the pseudo-locked group's RMID. The consequence of this is that the original free results in the pseudo-locked group's RMID being added to the rmid_free_lru linked list and the second free then attempts to add the same RMID entry to the rmid_free_lru again. Do not double-free a pseudo-locked group's RMID.
In the Linux kernel, the following vulnerability has been resolved: riscv: Prevent NULL pointer dereference in machine_kexec_prepare() A NULL pointer dereference issue is noticed in riscv's machine_kexec_prepare(), where image->segment[i].buf might be NULL and copied unchecked. The NULL buf comes from ima_add_kexec_buffer(), where kbuf is added by kexec_add_buffer(), but kbuf.buffer is NULL, then it is copied without a check in machine_kexec_prepare(): kexec_file_load -> kimage_file_alloc_init() -> kimage_file_prepare_segments() -> ima_add_kexec_buffer() -> kexec_add_buffer() -> machine_kexec_prepare() -> memcpy() Address this by adding a check before the data copy attempt.
In the Linux kernel, the following vulnerability has been resolved: s390/diag: Add missing array_index_nospec() call to memtop_get_page_count() 'level' is user space controlled and used to read from an array. Add the missing array_index_nospec() call to prevent speculative execution.
In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: rebind mm mempolicy to effective_mems, not mems_allowed Creating a child cpuset where cpuset.mems is never set leads to a div/0 when a VMA mempolicy with MPOL_F_RELATIVE_NODES rebinds in response to a CPU hotplug event. Reproduction steps: 1) Create a cgroup w/ cpuset controls (do not set cpuset.mems) 2) Move the task into the child cpuset 3) Create a VMA mempolicy for that task with MPOL_F_RELATIVE_NODES 4) unplug and hotplug a cpu echo 0 > /sys/devices/system/cpu/cpu1/online echo 1 > /sys/devices/system/cpu/cpu1/online 5) mempolicy rebind does a div/0 in mpol_relative_nodemask on the call to __nodes_fold() The cpuset code passes (cs->mems_allowed) which is not guaranteed to have nodes to the rebind routine. Use cs->effective_mems instead, which is guaranteed to have a non-empty nodemask once we reach that code path. [ david: add a comment, slightly rephrase description ]
In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: Fix possible nullptr KP in HWV cleanup/on-check Should probe fail for HW_VOTER type power domains, this driver was unconditionally trying to perform cleanup for DIRECT_CTL domains, but only after checking if the target domain is powered on... with the DIRECT_CTL scpsys_domain_is_on() code again. And there's more: the scpsys_domain_is_on() function is also being unconditionally used in the probe path, for any power domain that has flag MTK_SCPD_KEEP_DEFAULT_OFF! This bug was never experienced by anyone because the HWV domains never failed probe, and because none of those is declared with the aforementioned flag - but it's still something critical. In order to fix this, add a check for MTCMOS Type and, based on that, call the correct functions for an "is on" check, and also do the same for the cleanup path, calling the correct functions for the "power off" action. For the latter, since there's a call to pm_genpd_remove() right before calling power_off, be cautious and add a variation of the power off functions (with a _internal suffix) for those to get a pointer to scpsys_domain instead of one to generic_pm_domain as, even if that's still working, this is way too much fragile and would break at some point.
In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx: Fix i.MX8MP VC8000E power up sequence Per errata[1]: ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX power up/down cycling. Description: VC8000E reset de-assertion edge and AXI clock may have a timing issue. Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is de-asserted by HW) Add a bool variable is_errata_err050531 in 'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround is needed. If is_errata_err050531 is true, first clear the clk before powering up gpc, then enable the clk after powering up gpc. [1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: free mlx5_st_idx_data on final dealloc Workloads that repeatedly allocate and release mkeys carrying TPH steering-tag hints (e.g. churning RDMA MRs) leak one struct mlx5_st_idx_data per cycle; kmemleak flags it as unreferenced and the kmalloc slab grows over time. When the last reference to an ST table entry is dropped, mlx5_st_dealloc_index() removed the entry from idx_xa but the backing mlx5_st_idx_data allocation was never freed. Free idx_data after the xa_erase() so the lifetime of the bookkeeping struct matches the lifetime of the ST entry it tracks.
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix memory leak in ieee80211_register_hw() If kmemdup() fails while copying supported band structures, the error path jumps to fail_rate. This skips rate_control_deinitialize() and leaks the initialized local->rate_ctrl. Fix this by adding a fail_band label that shares the rate-control cleanup path before falling through to the remaining teardown. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have a suitable mac80211 device/driver combination to test with, no runtime testing was able to be performed.
In the Linux kernel, the following vulnerability has been resolved: memstick: ms_block: reject a card that reports too many blocks msb_ftl_initialize() computes the zone count from the card block count with no bound: msb->zone_count = msb->block_count / MS_BLOCKS_IN_ZONE; ... for (i = 0; i < msb->zone_count; i++) msb->free_block_count[i] = MS_BLOCKS_IN_ZONE; msb->block_count is a card value. msb_read_boot_blocks() reads number_of_blocks from the card boot page and byte swaps it. free_block_count is a fixed int[MS_MAX_ZONES]. MS_MAX_ZONES is 16, so the valid indices are 0 to 15. The init loop above indexes it by zone_count. msb_mark_block_used() and msb_mark_block_unused() index it by pba / MS_BLOCKS_IN_ZONE, for pba up to block_count - 1. A card may report up to 65535 blocks. A block_count above 8192 (MS_MAX_ZONES * MS_BLOCKS_IN_ZONE) lets the pba index reach 16. That writes past free_block_count[] and corrupts struct msb_data. A larger count runs the init loop past the end too. A real Memory Stick has at most 16 zones. So it has at most 8192 blocks. msb_ftl_initialize() now rejects a card that reports more than MS_MAX_ZONES * MS_BLOCKS_IN_ZONE blocks.
In the Linux kernel, the following vulnerability has been resolved: reset: sunxi: fix memory region leak on ioremap failure In sunxi_reset_init(), when ioremap() fails, the memory region obtained via request_mem_region() is not released, leading to a resource leak. Add an err_mem_region label to properly release the memory region before freeing the data structure.
In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix permanently busy scans after multiple roam iterations In order for the firmware to sleep, the driver has to confirm a previously received sleep request. The normal sequence of evets goes like this: EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm -> SLEEP -> EVENT_AWAKE -> AWAKE. Before sending the sleep-confirm command, the driver must make sure there are no commands either running or waiting to be completed. mwifiex_ret_802_11_associate() unconditionally sets ps_state = PS_STATE_AWAKE when it processes the association command response, outside of the normal powersave management flow. If EVENT_SLEEP arrives while the association command is in flight, ps_state is PRE_SLEEP when the association command response is parsed, and the forced AWAKE overwrites it. The deferred sleep-confirm is never sent. A subsequent scan_start command is correctly acknowledged, but the firmware doesn't generate scan_result events. The scan request never finishes, and additional requests from userspace fail with -EBUSY. After testing on both IW412 and W8997, I could only trigger the bug on the IW412 and observed the firmwares behave differently. On the IW412 the firmware still sends EVENT_SLEEP while the authentication / association process is ongoing. A W8997 under the same conditions seems to suppress power-save for the duration of the association, so PRE_SLEEP never coincided with the association response even after extended periods of testing using the loops described below (>12hours). On the IW412, the delay between commands that triggers an EVENT_SLEEP was empirically determined to be ~20ms. This delay can naturally occur when the driver is outputting debugging information (debug_mask = 0x00000037), in which situation the busy scans issue is repeatable while running "test 1)" as described below. If the delay between commands is less than ~20ms, the firmware stays awake and the issue was not reproducible running the same test. The host_mlme=false path also behaves differently. In this case, the entire authentication / association transaction is executed by one command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit EVENT_SLEEP while the command is running. Remove the assignment so the ps_state is only manipulated in the paths that are related to powersave event handling and on the main workqueue for correct sleep confirmation. The following loop tests were performed (with debugging output enabled): 1) force roaming between two AP's, one 5GHz and one 2.4GHz, same SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s between iterations. 2) force a disconnection to AP 1 and a connection to AP 2, test scan. Use wpa_cli to trigger the connection changes, sleep 2s between iterations. Each test ran in each device for at least 3 hours.
In the Linux kernel, the following vulnerability has been resolved: mtd: virt-concat: free duplicate generated name Every MTD registration runs mtd_virt_concat_create_join(). Once a virtual concat has already been registered, the function builds the same name again and takes the equal-name branch. That branch skips to the next item without freeing the newly allocated string. Free the temporary name before continuing.
In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore esdhc_change_pinstate() checks for pins_100mhz and pins_200mhz at the top of the function and returns -EINVAL if either is not defined. This prevents the default case from ever being reached, which means devices with a sleep pinctrl state but without high-speed pin states (100mhz/ 200mhz) can never restore their default pin configuration. Move the IS_ERR checks for pins_100mhz and pins_200mhz into their respective switch cases.
In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt When using WIFI out-of-band wakeup, an "irq xxx: nobody cared" warning occurs. This happens because the usdhc interrupt is not disabled during system suspend when device_may_wakeup() returns false. The sequence of events leading to this issue: 1. System enters suspend without disabling usdhc interrupt (because device_may_wakeup() returns false for usdhc device) 2. WIFI out-of-band wakeup triggers system resume via GPIO interrupt 3. WIFI sends a Card interrupt before usdhc has fully resumed 4. usdhc is still in runtime suspend state and cannot handle the interrupt properly 5. The unhandled interrupt triggers "nobody cared" warning Fix this by unconditionally disabling the usdhc interrupt during suspend and re-enabling it during resume, regardless of the wakeup capability. This ensures no interrupts are processed during the suspend/resume transition.
In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to simplify error handling. pm_runtime_resume_and_get() automatically drops the usage counter on failure, avoiding the need for a separate pm_runtime_put_noidle() call. If it fails, the device is unclocked and accessing hardware registers would cause a kernel panic, so return the error immediately.
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in f2fs_balance_fs() When the f2fs filesystem space is nearly exhausted, we encounter deadlock issues as below: INFO: task A:1890 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204 Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 folio_wait_bit+0x20/0x38 folio_wait_writeback+0x54/0xc8 truncate_inode_partial_folio+0x70/0x1e0 truncate_inode_pages_range+0x1b0/0x450 truncate_pagecache+0x54/0x88 f2fs_file_write_iter+0x3e8/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:11 state:D stack:0 pid:2680853 tgid:2680853 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 __filemap_get_folio+0x214/0x348 pagecache_get_page+0x20/0x70 f2fs_get_read_data_page+0x150/0x3e8 f2fs_get_lock_data_page+0x2c/0x160 move_data_page+0x50/0x478 do_garbage_collect+0xd38/0x1528 f2fs_gc+0x240/0x7e0 f2fs_balance_fs+0x1a0/0x208 f2fs_write_single_data_page+0x6e4/0x730 f2fs_write_cache_pages+0x378/0x9b0 f2fs_write_data_pages+0x2e4/0x388 do_writepages+0x8c/0x2c8 __writeback_single_inode+0x4c/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x200 INFO: task kworker/u8:8:2641297 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:8 state:D stack:0 pid:2641297 tgid:2641297 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_write_inode+0xf4/0x328 __writeback_single_inode+0x370/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x20 INFO: task B:1902 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:B state:D stack:0 pid:1902 tgid:1626 ppid:1153 flags:0x0000020c Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_map_blocks+0x94c/0x1110 f2fs_file_write_iter+0x228/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task sync:2769849 blocked for more than 120 seconds. Tainted: G ---truncated---
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs() When we mount device w/ gc_merge mount option, we may suffer below potential deadlock: Kworker GC trehad Truncator - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page - folio_start_writeback --- set writeback flag on folio - f2fs_outplace_write_data : cached folio in internal bio cache - f2fs_balance_fs - wake_up(gc_thread) : wake up gc thread to run foreground GC - finish_wait(fggc_wq) : wait on the waitqueue --- wait on GC thread to finish the work - truncate_inode_pages_range - __filemap_get_folio(, FGP_LOCK) --- lock folio - truncate_inode_partial_folio - folio_wait_writeback --- wait on writeback being cleared - do_garbage_collect - move_data_page - f2fs_get_lock_data_folio - lock on folio --- blocked on folio's lock In order to avoid such deadlock, let's call below functions to commit cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did in NOGC_MERGE path. - f2fs_submit_merged_write(sbi, DATA); - f2fs_submit_all_merged_ipu_writes(sbi);
In the Linux kernel, the following vulnerability has been resolved: usb: atm: ueagle-atm: wait for pre-firmware load in .disconnect() ueagle-atm uses the asynchronous request_firmware_nowait() in .probe(), but does not wait for its completion, not even in .disconnect(); so, if the device is unplugged meanwhile, its teardown runs concurrently with that. Even though this inconsistency is worth addressing on its own, it has also triggered several bug reports in syzbot over the years (some auto-closed) where the firmware sysfs fallback mechanism (CONFIG_FW_LOADER_USER_HELPER) creates a firmware subdirectory in the device directory during its removal, which might hit unexpected conditions in kernfs, apparently, depending at which point the add and remove operations raced. (See links.) The pattern is: usb ?-?: Direct firmware load for ueagle-atm/eagle?.fw failed with error -2 usb ?-?: Falling back to sysfs fallback for: ueagle-atm/eagle?.fw <ERROR> Call trace: ... kernfs_create_dir_ns sysfs_create_dir_ns create_dir kobject_add_internal kobject_add_varg kobject_add class_dir_create_and_add get_device_parent device_add fw_load_sysfs_fallback fw_load_from_user_helper firmware_fallback_sysfs _request_firmware request_firmware_work_func ... (Some variations are observed, after fw_load_sysfs_fallback(), e.g., [1].) While the kernfs side is being looked at, the ueagle-atm side can be fixed by waiting for the pre-firmware load in the .disconnect() handler. This change has a similar approach to previous work by Andrey Tsygunka [2] (wait_for_completion() in .disconnect()), but it is relatively different in design/implementation; using the Originally-by tag for credit assignment. This has been tested with: - synthetic reproducer to check the error path; - USB gadget (virtual device) to check the firmware upload path; - QEMU device emulator to check the device ID re-enumeration path; (The latter two were written by Claude; no other code/text in this commit.) Links (year first reported): 2025 https://syzbot.org/bug?extid=ce1e5a1b4e086b43e56d 2025 https://syzbot.org/bug?extid=9af8471255ac36e34fd4 2024 https://syzbot.org/bug?extid=306212936b13e520679d 2023 https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2 2022 https://syzbot.org/bug?extid=782984d6f1701b526edb 2021 https://syzbot.org/bug?id=f3f221579f4ef7e9691281f3c6f56c05f83e8490 2021 https://syzbot.org/bug?id=84d86f0d71394829df6fc53daf6642c045983881 2021 https://syzbot.org/bug?id=3302dc1c0e2b9c94f2e8edb404eabc9267bc6f90 [1] https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2 [2] https://lore.kernel.org/lkml/20250410093146.3776801-2-aitsygunka@yandex.ru/
In the Linux kernel, the following vulnerability has been resolved: liveupdate: validate session type before performing operation The sessions ioctls are not applicable to all session types. PRESERVE_FD is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only valid for incoming session. Calling a incoming ioctl on an outgoing session is invalid and can cause file handlers to run into unexpected errors. For example, a user can create a (outgoing) session, preserve a memfd, and then immediately do a retrieve without doing a kexec in between. This would result in memfd's retrieve handler to run. The handlers expects to be called from a post-kexec context, and will try to do a kho_restore_vmalloc() or kho_restore_folio() to try and restore memory. KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but since this is considered an internal error and KHO throws out a bunch of WARN()s. Associate a type with each ioctl op and validate the type in luo_session_ioctl() before dispatching the ioctl handler to make sure the op is being called for the right session type.
In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix deadlock if uvc_status_stop is called from async_ctrl.work If a UVC camera has an asynchronous control, uvc_status_stop may be called from async_ctrl.work: uvc_ctrl_status_event_work() uvc_ctrl_status_event() uvc_ctrl_clear_handle() uvc_pm_put() uvc_status_put() uvc_status_stop() cancel_work_sync() This will cause a deadlock, since cancel_work_sync will wait for uvc_ctrl_status_event_work to complete before returning. Fix this by returning early from uvc_status_stop if we are currently in the work function. flush_status now remains false until uvc_status_start is called again, ensuring that uvc_ctrl_status_event_work won't resubmit the URB.
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix leak of released call in recvmsg(MSG_PEEK) Fix rxrpc_recvmsg() to also drop the ref it holds on an already-released call if MSG_PEEK is in force (the function holds a ref on the call irrespective of whether MSG_PEEK is specified or not).
In the Linux kernel, the following vulnerability has been resolved: afs: fix NULL pointer dereference in afs_get_tree() afs_alloc_sbi() uses kzalloc for memory allocation. And, if ctx->dyn_root is not null, as->cell and as->volume are null. In trace_afs_get_tree() they are dereferenced. KASAN error message: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 18478 Comm: syz-executor.7 Not tainted 5.10.246-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:perf_trace_afs_get_tree+0x1d9/0x550 include/trace/events/afs.h:1365 Call Trace: trace_afs_get_tree include/trace/events/afs.h:1365 [inline] afs_get_tree+0x922/0x1350 fs/afs/super.c:599 vfs_get_tree+0x8e/0x300 fs/super.c:1572 do_new_mount fs/namespace.c:3011 [inline] path_mount+0x14a5/0x2220 fs/namespace.c:3341 do_mount fs/namespace.c:3354 [inline] __do_sys_mount fs/namespace.c:3562 [inline] __se_sys_mount fs/namespace.c:3539 [inline] __x64_sys_mount+0x283/0x300 fs/namespace.c:3539 do_syscall_64+0x33/0x50 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: fbcon: fix NULL pointer dereference for a console without vc_data fbcon_new_modelist() runs when a framebuffer's modelist changes. For each console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and passes the vc_num to fbcon_set_disp(). This assumes a console with a mode set has a vc_data, but it can be NULL. fbcon_set_disp() sets fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the mode set after the vc_data is freed. fbcon_new_modelist() then dereferences the NULL vc_data. Keep fb_display[i].mode set only while the console has a vc_data. Check vc_data before setting the mode in fbcon_set_disp(), and clear the mode in fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips such consoles.
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix leak when pinning ubuf pages When pin_user_pages_fast() returns fewer pages than requested, the pages that were successfully pinned are not released, leading to a leak. Fix this by unpinning any partially pinned pages before returning failure.
In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: inno-hdmi: Switch to drmm_kzalloc() Driver makes use of drmm_encoder_init() to initialize the encoder and automatically handle the cleanup by registering drm_encoder_cleanup() with drmm_add_action(). However, the internal structure containing the encoder part gets allocated with devm_kzalloc(), which happens while component_bind_all() is being called from Rockchip DRM driver. The component framework further ensures it is deallocated as part of releasing all the resources claimed during bind, which is triggered from component_unbind_all(). When the reference to the DRM device gets eventually dropped via drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release() attempts to access the now released encoder structure, leading to use-after-free. Ensure driver's internal structure is still reachable on encoder cleanup by switching from a device-managed allocation to a drm-managed one.
In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Switch to drmm_kzalloc() Driver makes use of drmm_encoder_init() to initialize the encoder and automatically handle the cleanup by registering drm_encoder_cleanup() with drmm_add_action(). However, the internal structure containing the encoder part gets allocated with devm_kzalloc(), which happens while component_bind_all() is being called from Rockchip DRM driver. The component framework further ensures it is deallocated as part of releasing all the resources claimed during bind, which is triggered from component_unbind_all(). When the reference to the DRM device gets eventually dropped via drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release() attempts to access the now released encoder structure, leading to use-after-free. Ensure driver's internal structure is still reachable on encoder cleanup by switching from a device-managed allocation to a drm-managed one.
In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges VMAs marked with VM_IO or VM_PFNMAP are not backed by struct page objects, which GPUSVM requires in order to operate correctly. In particular, get_pages() relies on hmm_range_fault() to resolve struct pages for the target range. Attempting to create an SVM range on such VMAs results in repeated get_pages() failures and can lead to an infinite loop inside a driver’s page‑fault handler. Prevent this by rejecting ranges on VM_IO or VM_PFNMAP VMAs and returning -EIO.
In the Linux kernel, the following vulnerability has been resolved: fpga: dfl: add bounds check in dfh_get_param_size() dfh_get_param_size() can return a parameter size larger than the feature region because the loop bounds check is evaluated before incrementing size. If the EOP (End of Parameters) bit is set in the same iteration, the inflated size is returned without re-validation against max. This can cause create_feature_instance() to call memcpy_fromio() with a size exceeding the ioremap'd region when a malicious FPGA device provides crafted DFHv1 parameter headers. Add a bounds check after the size increment to ensure the accumulated size never exceeds the feature boundary.
In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL.
In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: swp: Improve locking user experience In the case of the first block being locked (or the few first blocks), if the user want to fully unlock the device it has two possibilities: - either it asks to unlock the entire device, and this works; - or it asks to unlock just the block(s) that are currently locked, which fails. It fails because the conditions "can_be_top" and "can_be_bottom" are true. Indeed, in this case, we unlock everything, so the TB bit does not matter. However in the current implementation, use_top would be true (as this is the favourite option) and lock_len, which in practice should be reduced down to 0, is set to "nor->params->size - (ofs + len)" which is a positive number. This is wrong. An easy way is to simply add an extra condition. In the unlock() path, if we can achieve the same result from both sides, it means we unlock everything and lock_len must simply be 0. A comment is added to clarify that logic.
In the Linux kernel, the following vulnerability has been resolved: irqchip/crossbar: Use correct index in crossbar_domain_free() crossbar_domain_free() resets the domain data and then uses the nulled out irq_data->hwirq member as index to reset the irq_map[] entry and to write the relevant crossbar register with a safe entry. That means it never frees the correct index and keeps the crossbar register connection to the source interrupt active. If it would not reset the domain data, then this would be even worse as irq_data->hwirq holds the source interrupt number, but both the map and register index need the corresponding GIC SPI number and not the source interrupt number. This might even result in an out of bounds access as the source interrupt number can be higher than the maximal index space. Fix this by using the GIC SPI index from the parent domain's irq_data.
In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_tis_spi: Use wait_woken() in wait_for_tmp_stat() wait_event_interruptible_timeout() evaluates its condition after setting the current task state to TASK_INTERRUPTIBLE. With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait path is used: tpm_tis_status() tpm_tis_spi_read_bytes() tpm_tis_spi_transfer_full() spi_bus_lock() mutex_lock() Address this with the following measures: 1. Call wait_tpm_stat_cond() only while tasking is running. 2. Use wait_woken() to wait for changes.
In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix uninitialized xprt_create_args structure The xprt_create_args structure is allocated on the stack without initialization in rpc_sysfs_xprt_switch_add_xprt_store(). While some fields are manually populated, critical fields like srcaddr, bc_xps, and flags contain uninitialized stack garbage. This can lead to: 1. Kernel panic when xs_setup_xprt() dereferences garbage srcaddr 2. Information leak if srcaddr points to sensitive stack data 3. Unpredictable behavior if flags has random bits set The fix is to zero-initialize the structure to ensure all unused fields are NULL/0, preventing the transport setup code from acting on garbage data.
In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma-pcie: Reject devices without driver data dw_edma_pcie_probe() treats the PCI device ID driver_data as the template for the controller layout and copies it unconditionally. A device bound dynamically via sysfs can match the driver without that data, which leads to a NULL pointer dereference. Reject such matches before enabling the device.
In the Linux kernel, the following vulnerability has been resolved: platform/x86/intel/tpmi: use cleanup helpers in mem_write() In mem_write(), the temporary array returned by parse_int_array_user() must be released on all exit paths. Convert the array variable to use cleanup.h scope-based cleanup so it is freed automatically on return. This also moves the array declaration next to parse_int_array_user() as required by cleanup.h usage guidelines.
In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (atomic) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic (polling) path rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle for this i2c controller. Reading I2DR to obtain the count likewise arms the next byte on the count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly and left the bus held. Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so the existing last-byte handling emits STOP; the dummy byte is discarded. A count of 0 is a valid empty block read; a count above I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus has been released. The interrupt-driven path has the same flaw from a later commit and is fixed separately, as it carries a different Fixes: tag and stable range.
In the Linux kernel, the following vulnerability has been resolved: i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource() If devm_platform_get_and_ioremap_resource() returns an error, mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to get the error code. This results in a use-after-free. Save the error code before freeing tmp_res.
In the Linux kernel, the following vulnerability has been resolved: xen/gntdev: fix error handling in ioctl When gntdev_ioctl_map_grant_ref() fails to copy the operation result back to userspace after successfully adding the mapping to the list, the error path returns -EFAULT without releasing the reference acquired by gntdev_alloc_map(). The mapping remains in priv->maps with a refcount of 1, causing a memory leak and a dangling list entry. Additionally, gntdev_add_map() may modify map->index to avoid overlap with existing mappings. Therefore, the index returned to userspace must be obtained after gntdev_add_map() completes. Fix this by holding the mutex across gntdev_add_map(), retrieving the correct index, and copy_to_user(). If copy_to_user() fails, remove the mapping from the list and release the reference while still holding the lock. Fix these issues by properly handling all error cases.
In the Linux kernel, the following vulnerability has been resolved: NFS: Charge unstable writes by request size, not folio size nfs_folio_mark_unstable() and nfs_folio_clear_commit() charge and uncharge NR_WRITEBACK/WB_WRITEBACK by folio_nr_pages(folio) once per *request* added to or removed from a commit list. This is correct only when a folio has a single associated request. When pg_test splits a folio into N sub-folio requests (e.g. pNFS flexfiles striping with a stripe unit smaller than the folio size, or plain wsize-limited splitting), each of the N requests independently charges the whole folio's page count, inflating the accounting by a factor of N per folio. With large folios and small stripe units this reaches multiple orders of magnitude: a 2 MiB folio split into 512 4 KiB requests can charge up to 512x its real size, pushing global dirty+writeback accounting past the system's dirty threshold and forcing every buffered writer on the host into the hard-throttle path, including unrelated in-kernel NFS server threads sharing the box. Charge each request only for the pages it actually covers.
In the Linux kernel, the following vulnerability has been resolved: nvme-apple: Prevent shared tags across queues on Apple A11 On Apple A11, tags of pending commands must be unique across the admin and IO queues, else the firmware crashes with "duplicate tag error for tag N", with N being the tag. Apply the existing workaround for M1 of reserving two tags for the admin queue to A11.
In the Linux kernel, the following vulnerability has been resolved: nvmet: fix refcount leak in nvmet_sq_create() In nvmet_sq_create(), a reference on the ctrl is taken via kref_get_unless_zero() before calling nvmet_check_sqid(). If nvmet_check_sqid() fails, the function returns the error directly without releasing the reference, leading to a leak. Fix this by jumping to the "ctrl_put" label, which already performs the necessary nvmet_ctrl_put(ctrl). This ensures the reference is properly released on this error path.
In the Linux kernel, the following vulnerability has been resolved: netdev-genl: report NAPI thread PID in the caller's pid namespace netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID using task_pid_nr(), which returns the PID in the initial pid namespace. NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family is netnsok, so a caller in a child pid namespace can issue it. That caller then sees the kthread's global PID, even though the kthread is not visible in its pid namespace, where the value should be 0. Translate the PID through the caller's pid namespace, the same way commit 3799c2570982 ("io_uring/fdinfo: translate SqThread PID through caller's pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both run synchronously in the caller's context, so task_active_pid_ns(current) is the caller's pid namespace.
In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix CAN frame rx/tx statistics KCSAN detected a data race within the bcm_rx_handler() when two CAN frames have been simultaneously received and processed in a single rx op by two different CPUs. Use atomic operations with (signed) long data types to access the statistics in the hot path to fix the KCSAN complaint. Additionally simplify the update and check of statistics overflow by using the atomic operations in separate bcm_update_[rx|tx]_stats() functions. The rx variant runs under bcm_rx_update_lock to prevent races when resetting the two rx counters; the tx variant runs under bcm_tx_lock and only needs to guard its own counter's overflow. As the rx path resets its values already at LONG_MAX / 100, there is no conflict between the two locking domains (bcm_rx_update_lock vs. bcm_tx_lock) even for ops that use both paths. The rx statistics update and the frames_filtered update in bcm_rx_changed() were previously performed in two separate bcm_rx_update_lock sections. For an rx op subscribed on all interfaces (ifindex == 0), bcm_rx_handler() can run concurrently on different CPUs, so a counter reset by one CPU between these two sections could leave frames_filtered larger than frames_abs on another CPU, producing a bogus (even negative) reduction percentage in procfs. Update the statistics in the same critical section as bcm_rx_changed() to close this gap, which also removes the now unneeded extra lock/unlock pair around the traffic_flags calculation.
In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler() For an rx op subscribed on all interfaces (ifindex == 0), the same op is registered once in the shared per-netns wildcard filter list, so bcm_rx_handler() can run concurrently on different CPUs for frames arriving on different net devices. op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was taken, allowing concurrent writers to race each other - including a torn store of the 64-bit rx_stamp on 32-bit platforms. Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex of the very same frame whose content it is delivering. So the assignment is placed in the same unbroken bcm_rx_update_lock section as the content comparison. As a side effect, the RTR-request frame feature (which never reach bcm_send_to_user()) no longer updates rx_stamp/rx_ifindex, since only the notification path needs them.
In the Linux kernel, the following vulnerability has been resolved: dm-ioctl: fix a possible overflow in list_version_get_info sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the output buffer - info->vers->version[0], info->vers->version[1], info->vers->version[2] and info->vers->next. This can cause buffer overflow. Fix this buffer overflow by replacing "sizeof(tt->version)" with "sizeof(struct dm_target_versions)".
In the Linux kernel, the following vulnerability has been resolved: dm-pcache: reject option groups without values The pcache target parses optional arguments as name/value pairs. A table that advertises one optional argument and supplies only a recognized option name, for example "cache_mode", reaches parse_cache_opts() with argc == 1. The parser consumes the name, decrements argc to zero, then calls dm_shift_arg() again for the value. dm_shift_arg() returns NULL when no arguments remain, and the following strcmp() dereferences that NULL pointer. Check that each recognized option has a value before consuming it. This keeps valid "cache_mode writeback" and "data_crc true/false" tables unchanged while making malformed tables fail during target construction with a precise missing-value error.
In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix leaking uninitialized kernel memory If hash size is less than device's tuple size, dm-integrity is supposed to zero the remaining space. There was a bug in the code that zeroing didn't work. This commit fixes it.
In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix a possible NULL pointer dereference Fix a possible NULL pointer dereference dm_verity_loadpin_is_bdev_trusted if the device has no table.
In the Linux kernel, the following vulnerability has been resolved: dm-verity: make error counter atomic The error counter "v->corrupted_errs" was not atomic, thus it could be subject to race conditions. The call to dm_audit_log_target("max-corrupted-errors") may be skipped due to the races.
In the Linux kernel, the following vulnerability has been resolved: dma-buf: dma-fence: Fix potential NULL pointer dereference The commit mentioned in the fixes tag below introduced a mechanism through which fence producers can fully decouple from fence consumers. This, desirable, mechanism is based on the fence's signaled-bit as the "decoupling point". A sophisticated interaction between RCU and atomic instructions attempts to ensure that fence consumers can still interact with fence producers through the dma_fence_ops (callback pointers into the producer). This is the desired behavior: to check for decoupling, the signaled-bit is first checked. If it's not yet signaled, RCU ensures that the ops pointer cannot yet be NULL. Hereby, dma_fence_signal_timestamp_locked() first sets the signaled-bit, and then sets the ops pointer to NULL. Readers first load the ops pointer, and then check through the signaled-bit whether the pointer can legally be accessed. These set and load operations could occur out of order on weakly ordered platforms. This problem can be solved very elegantly by using the ops pointer itself as the synchronization point. The pointer is either NULL, or cannot become NULL while it is being used thanks to RCU. Replace the signaled-bit check in dma_fence_timeline_name() and dma_fence_driver_name().
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject command submission on devices without a submit op amdxdna_cmd_submit() calls xdna->dev_info->ops->cmd_submit() unconditionally, but only aie2_dev_ops defines that callback. aie4_vf_ops (the AIE4 SR-IOV virtual function) does not, so a user AMDXDNA_EXEC_CMD ioctl on an AIE4 device reaches a NULL function-pointer call and oopses the kernel. AIE4 submits work through a mapped user queue and doorbell, not this ioctl path. Reject the submission early with -EOPNOTSUPP when the device provides no cmd_submit op, so the shared EXEC ioctl is a clean no-op on such devices. Found by 0sec automated security-research tooling (https://0sec.ai).
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject user command submission without a command BO amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is skipped, leaving it NULL, and no check rejects it on the user path (the !job->cmd_bo guard lives inside the != INVALID branch). The job is then armed and pushed to the DRM scheduler. aie2_sched_job_run() takes the drv_cmd == NULL path and calls amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) -> to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker. A process with access to the accel node on a system with a probed AMD NPU can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl (cmd_handles = 0). Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO) legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd. Reject the invalid handle for user submissions (drv_cmd == NULL) at the submit choke point so every user path is covered. Found by 0sec automated security-research tooling (https://0sec.ai).
In the Linux kernel, the following vulnerability has been resolved: scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path If phys_disk->in_reset is set, the function returns directly without undoing the resources acquired for the command. Add the missing error cleanup by unmapping the IOACCEL2 SG chain block when needed, unmapping the SCSI command, and dropping the outstanding IOACCEL command count before returning.
In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup() The memory allocated for mboxq using mempool_alloc() is not freed in some of the early exit error paths. Fix that by moving the mempool_free() call to an earlier point after last use.
In the Linux kernel, the following vulnerability has been resolved: scsi: xen: scsiback: Free the command tag on the TMR submit-failure path scsiback_device_action() obtains a command tag in scsiback_get_pend_req() and submits a task-management request with target_submit_tmr(). When target_submit_tmr() fails it returns < 0 and scsiback jumps to the err: label, which sends a response but frees nothing, leaking the tag. Impact: a pvSCSI guest can leak the command tags of a LUN's session, stopping the LUN, by issuing VSCSIIF_ACT_SCSI_ABORT or RESET requests whenever target_submit_tmr() fails. transport_generic_free_cmd() cannot be used here. By the time target_submit_tmr() returns an error it has already run __target_init_cmd() (so se_cmd->cmd_kref is one, not zero), and on its target_get_sess_cmd() error path it has freed se_cmd->se_tmr_req via core_tmr_release_req() while leaving SCF_SCSI_TMR_CDB set and the pointer dangling. Letting the command release run target_free_cmd_mem() would then double-free se_tmr_req. Use the same helper, which returns just the tag, on this path too.
In the Linux kernel, the following vulnerability has been resolved: scsi: elx: efct: Fix refcount leak in efct_hw_io_abort() When efct_hw_reqtag_alloc() fails in efct_hw_io_abort(), the error path returns -ENOSPC without releasing the reference obtained via kref_get_unless_zero() earlier in the function. All other error paths correctly drop the reference. This causes a permanent reference leak on the io_to_abort object. Additionally, the abort_in_progress flag is left set to true on this path, which means future abort attempts for the same I/O will immediately return -EINPROGRESS even though the abort was never submitted, effectively blocking recovery. Fix this by adding the missing kref_put() call and reset abort_in_progress to false, matching the cleanup done in the efct_hw_wq_write() failure path below.
In the Linux kernel, the following vulnerability has been resolved: scsi: elx: efct: Fix I/O leak on unsupported additional CDB efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an unsolicited FCP command. If the command has an unsupported additional CDB, the function returns -EIO before handing the IO to the SCSI layer. Free the allocated IO before returning from this error path.
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix use-after-free and double-free in disconnect ims_pcu_disconnect() only intended to perform cleanup when the primary (control) interface is unbound. However, it currently relies on the interface class to distinguish between control and data interfaces. A malicious device could present a data interface with the same class as the control interface, leading to premature cleanup and potential use-after-free or double-free. Switch to verifying that the interface being disconnected is indeed the control interface.
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - validate control endpoint type The driver currently assumes that the first endpoint of the control interface is an interrupt IN endpoint without verifying it. A malicious device could provide a different endpoint type, which would then be passed to usb_fill_int_urb(), potentially leading to kernel warnings or undefined behavior. Verify that the control endpoint is an interrupt IN endpoint.
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix firmware leak in async update The firmware object was not being released if validation failed. Use __free(firmware) to ensure the firmware is always released.
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix out-of-bounds read in ims_pcu_irq() debug logging The debug logging in ims_pcu_irq() unconditionally prints data from pcu->urb_in_buf. However, if the interrupt fired for pcu->urb_ctrl, the actual data resides in pcu->urb_ctrl_buf. If urb->actual_length for the control URB exceeds pcu->max_in_size, this leads to an out-of-bounds read. Fix this by printing from the correct buffer associated with the URB.
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix race condition in reset_device sysfs callback The ims_pcu_reset_device() sysfs callback calls ims_pcu_execute_command() without acquiring pcu->cmd_mutex. This can lead to data races and corruption of the shared command buffer if triggered concurrently with other commands. Acquire pcu->cmd_mutex before calling ims_pcu_execute_command().
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix type confusion in CDC union descriptor parsing The driver currently trusts the bMasterInterface0 from the CDC union descriptor without verifying that it matches the interface being probed. This could lead to the driver overwriting the private data of another interface. Validate that the control interface found in the descriptor is indeed the one we are probing.
In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix use-after-free on probe failure The vub300 driver lifetime-manages its controller state using vub300->kref, with vub300_delete() freeing the mmc host when the last reference is dropped. The probe error path after the inactivity timer has been armed still bypasses that lifetime rule, however, and falls through to mmc_free_host() directly if mmc_add_host() fails. The race window is between arming the inactivity timer and reaching the probe error unwind after mmc_add_host() fails: probe thread timer/workqueue ------------ --------------- kref_init(&vub300->kref) ref = 1 kref_get(&vub300->kref) ref = 2, timer ref add_timer(inactivity_timer) fires after one second | | race window |<----------------------------------------------------> | mmc_add_host(mmc) inactivity timer fires vub300_queue_dead_work() kref_get() ref = 3 queue_work(deadwork) mmc_add_host() fails timer_delete_sync() mmc_free_host(mmc) frees vub300 deadwork runs use-after-free The inactivity timeout is one second, so this would require mmc_add_host() to both fail and take more than one second to do so. This is unlikely to happen in practice, but the error path is still wrong. timer_delete_sync() only waits for the timer callback itself. It does not flush deadwork that the callback may already have queued. As a result, queued deadwork can still hold a kref while the probe error path directly frees the backing mmc host, including the vub300 storage. Fix this by using the same lifetime mechanism as disconnect. Clear vub300->interface so that the timer callback and any queued deadwork return early and drop their references, then drop the initial probe reference and return without falling through to err_free_host.
In the Linux kernel, the following vulnerability has been resolved: wifi: libertas_tf: fix use-after-free in lbtf_free_adapter() lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does not wait for a running command_timer_fn() callback. lbtf_free_adapter() runs on the teardown path right before ieee80211_free_hw() frees priv, both in lbtf_remove_card() and in the probe error path. command_timer is armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent. command_timer_fn() dereferences priv. If a command times out as the device is removed, command_timer_fn() runs concurrently with teardown and dereferences priv after it has been freed. This is the same use-after-free that commit 03cc8f90d053 ("wifi: libertas: fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas driver. The libertas_tf variant has the identical pattern and was left unchanged. Use timer_delete_sync() so any in-flight callback completes before priv is freed.
In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Use u64 multiplication in update_rlimit_cpu() update_rlimit_cpu() converts the RLIMIT_CPU value to nanoseconds with u64 nsecs = rlim_new * NSEC_PER_SEC; On 32-bit kernels both rlim_new (unsigned long) and NSEC_PER_SEC (1000000000L) are 32-bit, so the multiplication is performed in unsigned long and truncated for rlim_new > 4 seconds before being widened to u64. The same file already casts to u64 for the matching computation in check_process_timers(): u64 softns = (u64)soft * NSEC_PER_SEC; As a result, the truncated value is installed into the CPUCLOCK_PROF expiry cache (nextevt), causing the process CPU timer to be programmed to fire prematurely for any RLIMIT_CPU soft limit >= 5 seconds. The actual SIGXCPU/SIGKILL decision in check_process_timers() already casts to u64 and is therefore correct, so limit enforcement is not broken; only the expiry-cache programming is wrong. Apply the same cast here so both paths convert rlim_cur identically. 64-bit kernels are unaffected.
In the Linux kernel, the following vulnerability has been resolved: gpio: tegra: do not call pinctrl for GPIO direction tegra_gpio_direction_input() and tegra_gpio_direction_output() already program the GPIO controller direction registers directly. The additional pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl operation, because the Tegra pinmux ops provide GPIO request/free handling but no gpio_set_direction hook. The extra call still enters the pinctrl core and takes pctldev->mutex. Shared GPIO users can call the direction path while holding their per-line spinlock, so this otherwise redundant pinctrl direction call can sleep in an atomic context. This was found by our static analysis tool and then confirmed by manual review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the Tegra pinctrl ops. The reviewed path has a default non-sleeping struct gpio_chip while the direction callback still enters the pinctrl mutex path. A directed runtime validation kept the same non-sleeping chip registration and drove: gpio_shared_proxy_direction_output() gpiod_direction_output_raw_commit() tegra_gpio_direction_output() pinctrl_gpio_direction_output() Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output() on the stack. Do not mark the whole chip as can_sleep to paper over this: can_sleep describes whether get()/set() may sleep, and Tegra value access is MMIO. Remove the redundant pinctrl direction calls and keep pinctrl involvement in the existing request/free path.
In the Linux kernel, the following vulnerability has been resolved: gpio: mt7621: avoid corruption of shared interrupt trigger state The bank-shared fields like 'rising' and 'falling' are modified using non-atomic read-modify-write operations. Since every gpio chip instance represents an entire bank of 32 pins, if 'mediatek_gpio_irq_type()' is called concurrently for different IRQs on the same bank a possible overwrite of each other's configuration is possible. Thus, protect this state with 'gpio_generic_lock_irqsave' lock in the same way it is handled in irp_chip 'mediatek_gpio_irq_mask()' and 'mediatek_gpio_irq_unmask()' callbacks.
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: icssg: guard PA stat lookups icssg_ndo_get_stats64() unconditionally calls emac_get_stat_by_name() with FW PA stat names regardless of whether the PA stats block is present on the hardware. emac_get_stat_by_name() already guards the PA stats lookup with `if (emac->prueth->pa_stats)`; when that pointer is NULL the lookup falls through to netdev_err() and returns -EINVAL. Because ndo_get_stats64 is polled regularly by the networking stack this produces thousands of log entries of the form: icssg-prueth icssg1-eth end0: Invalid stats FW_RX_ERROR A secondary consequence is that the int(-EINVAL) return value is implicitly widened to a near-ULLONG_MAX unsigned value when accumulated into the __u64 fields of rtnl_link_stats64, silently corrupting the rx_errors, rx_dropped and tx_dropped counters reported by `ip -s link`. Every other PA-aware code path in the driver is already guarded with the same `if (emac->prueth->pa_stats)` check. Apply the same guard here.
In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: destroy DMA pool on CLDMA late init failure t7xx_cldma_late_init() creates md_ctrl->gpd_dmapool before initializing the TX and RX rings. If any ring initialization fails, the error path frees the already initialized rings but leaves the DMA pool allocated. Destroy md_ctrl->gpd_dmapool on the late-init failure path to avoid leaking the DMA pool.
In the Linux kernel, the following vulnerability has been resolved: net: ixp4xx_hss: fix duplicate HDLC netdev allocation ixp4xx_hss_probe() allocates two HDLC netdevs. The first one is stored in ndev, initialized, and registered with register_hdlc_device(). The second one is stored in port->netdev and later used by the remove path for unregister_hdlc_device() and free_netdev(). This means that the registered netdev is not the same object that is unregistered and freed on remove. It also leaks the first allocation if the second alloc_hdlcdev() call fails, and the first allocation is not checked before ndev is used. Older code allocated the HDLC netdev only once and stored the same object in both the local variable and port->netdev. The buggy conversion split this into two alloc_hdlcdev() calls. A later rename changed the local variable name to ndev, but the underlying mismatch remained. Fix this by allocating the HDLC netdev only once and assigning the same object to port->netdev.
In the Linux kernel, the following vulnerability has been resolved: net: ena: clean up XDP TX queues when regular TX setup fails create_queues_with_size_backoff() creates XDP TX queues before setting up the regular TX path. If the subsequent allocation or creation of regular TX queues fails, the error handling paths omit the teardown of the XDP TX queues, leading to a resource leak. Fix this by explicitly destroying the XDP TX queue subset at the two missing failure points. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have an ENA device to test with, no runtime testing was able to be performed.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Free BPID bitmap on setup failure nix_setup_bpids() allocates bp->bpids with rvu_alloc_bitmap(), which uses a plain kcalloc(). If any of the following devm_kcalloc() allocations for the BPID mapping arrays fails, the function returns without freeing the bitmap. Free the BPID bitmap before returning from those error paths.
In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix cas_ctl leak on spi_async failure ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC) and relies entirely on the SPI completion callback ca8210_spi_transfer_complete() to free it. The spi_async() API only invokes the completion callback on successful submission. On failure it returns a negative error code without ever queuing the callback, which leaves cas_ctl and its embedded spi_message and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is inside the completion callback, so there is no other reclamation path. ca8210_spi_transfer() is called from ca8210_spi_exchange(), the interrupt handler ca8210_interrupt_handler(), and from the retry path inside the completion callback itself. The exchange and interrupt handler paths loop on -EBUSY, so under sustained SPI bus contention every retry iteration leaks a fresh cas_ctl (~600 bytes per occurrence). Fix it by freeing cas_ctl on the spi_async() error path. While here, correct the misleading error string: the function calls spi_async(), not spi_sync().
In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange a kmalloc'd buffer pointer through a struct kfifo, but pass a literal '4' as the byte count to kfifo_in()/kfifo_out(). This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the low 4 bytes of the 8-byte pointer are written into the FIFO. The reader then reads back 4 bytes into an 8-byte local pointer variable, leaving the upper 4 bytes uninitialized stack data. The first dereference of the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel address and generally results in an oops. Use sizeof(fifo_buffer) so the byte count matches pointer width on every architecture. The driver has no architecture restriction in Kconfig, so any 64-bit build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has been latent since the driver was added in 2017 because it is most commonly deployed on 32-bit MCUs. Found via a custom Coccinelle semantic patch hunting for short-byte kfifo I/O on byte-mode kfifos used to shuttle pointers.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix stack buffer overflow in multichannel session-key copy Commit 4b706360ffb7 ("ksmbd: fix multichannel binding and enforce channel limit") moved the binding-path session key out of the session-wide sess->sess_key (CIFS_KEY_SIZE = 40) into a new per-channel buffer, and sized both that buffer and the on-stack copy used during binding with SMB2_NTLMV2_SESSKEY_SIZE (16): struct channel { char sess_key[SMB2_NTLMV2_SESSKEY_SIZE]; /* 16 */ ... }; ntlm_authenticate() / krb5_authenticate(): char channel_key[SMB2_NTLMV2_SESSKEY_SIZE] = {}; /* 16 */ char *auth_key = conn->binding ? channel_key : sess->sess_key; The two writers that fill this destination still bound the copy length against CIFS_KEY_SIZE (40), not against the 16-byte buffer: ksmbd_decode_ntlmssp_auth_blob() (NTLM key exchange): if (sess_key_len > CIFS_KEY_SIZE) /* 40 */ return -EINVAL; arc4_crypt(ctx_arc4, sess_key, (char *)authblob + sess_key_off, sess_key_len); ksmbd_krb5_authenticate(): if (resp->session_key_len > sizeof(sess->sess_key)) /* 40 */ ... memcpy(sess_key, resp->payload, resp->session_key_len); On a binding SESSION_SETUP, auth_key points at the 16-byte channel_key, so a client that supplies an NTLM EncryptedRandomSessionKey of up to 40 bytes (with NTLMSSP_NEGOTIATE_KEY_EXCH), or a Kerberos ticket whose session key is longer than 16 bytes (a normal AES256 key is 32), writes past the 16-byte stack buffer -- up to a 24-byte kernel stack overflow. KASAN reports it as a stack-out-of-bounds write in arc4_crypt() called from ksmbd_decode_ntlmssp_auth_blob(). The destinations must be able to hold the full session key the length checks already permit. Size the per-channel key buffer and the two on-stack channel_key buffers with CIFS_KEY_SIZE, matching sess->sess_key.
In the Linux kernel, the following vulnerability has been resolved: ipmi: fix refcount leak in i_ipmi_request() When a caller provides a `supplied_recv` message to i_ipmi_request(), the function increments the user's `nr_msgs` reference count. If an error occurs later, the out_err cleanup path only frees the recv_msg if the function allocated it itself (i.e., !supplied_recv). In the supplied_recv case the cleanup is skipped, leaving the reference count elevated. The caller ipmi_request_supply_msgs() does not release the supplied_recv on error, so the reference is permanently leaked. Fix this by explicitly reverting the reference count operations when a supplied recv_msg with a valid user pointer is present in the error path: decrement nr_msgs and drop the user's kref.
In the Linux kernel, the following vulnerability has been resolved: bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp() If the allocation of fp[i].tpa_info fails, the error path will not free the struct bnx2x_fastpath allocated earlier, as it is not linked to the bp structure yet. Fix that by linking it immediately after allocation.
In the Linux kernel, the following vulnerability has been resolved: net: liquidio: fix BAR resource leak on PF number failure If cn23xx_get_pf_num() fails, the function returns without unmapping either BAR. Unmap both BARs before returning from the error path. Found by manual code review.
In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Initialize eth_syslock spinlock before use lan743x_hardware_init() calls pci11x1x_strap_get_status() during the PCI11x1x probe sequence. That helper acquires the Ethernet subsystem hardware lock via lan743x_hs_syslock_acquire(), which relies on adapter->eth_syslock_spinlock to serialize access. The spinlock is currently initialized only after the strap status is read. With CONFIG_DEBUG_SPINLOCK enabled, taking the zeroed initialized spinlock can trip the spinlock debug check. Fix by initializing adapter->eth_syslock_spinlock before reading the strap status so the probe path never attempts to lock an uninitialized spinlock.
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix matcher leak on resize target setup failure hws_bwc_matcher_move() allocates a replacement matcher before setting it as the resize target. If mlx5hws_matcher_resize_set_target() fails, the replacement matcher is not attached anywhere and is leaked. Fix the leak by destroying the replacement matcher before returning from the resize-target failure path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have a mlx5 HWS-capable device to test with, no runtime testing was able to be performed.
In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Add NOLPM quirk for PNY CS900 1TB SSD The PNY CS900 1TB SSD (Phison PS3111-S11, DRAM-less) drops off the bus after entering Device-Initiated Slumber during idle. With the default med_power_with_dipm policy the link goes down (SStatus 1 SControl 300) and does not recover, forcing the filesystem read-only. Forcing max_performance keeps the link stable across prolonged idle. Add a NOLPM quirk so link power management is disabled for this drive specifically, leaving it intact for other devices on the host.
In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Reject an invalid concurrent positioning ranges count ata_dev_config_cpr() takes the number of range descriptors from buf[0] of the concurrent positioning ranges log (up to 255), which the device reports independently of the log size in the GPL directory. The count is then walked at a fixed 32-byte stride in two places with no bound: the log read here, and the INQUIRY VPD page B9h emitter, which writes one descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device reporting a count larger than its own log overflows the read buffer (up to 7704 bytes past a 512-byte slab), and a count above 62 overflows the response buffer on the emit side. Bound the count once, on probe, against both the log the device returned and the number of descriptors the VPD B9h response buffer can hold (ATA_DEV_MAX_CPR, derived from the rbuf size). Reject an out-of-range count with a warning; this keeps the emitter in bounds with no separate change there.
In the Linux kernel, the following vulnerability has been resolved: riscv: probes: save original sp in rethook trampoline Reading a word from the stack in a kretprobe crashes a risc-v kernel. $ cd /sys/kernel/tracing/ $ echo 'r n_tty_write $stack0' > dynamic_events $ echo 1 > events/kprobes/enable Unable to handle kernel paging request at virtual address 0000000200000128 ... [<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38 [<ffffffff80177196>] process_fetch_insn+0x3ee/0x760 [<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0 [<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58 [<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x90 [<ffffffff80180838>] rethook_trampoline_handler+0x70/0x108 [<ffffffff8001ba32>] arch_rethook_trampoline_callback+0x12/0x1c [<ffffffff8001ba84>] arch_rethook_trampoline+0x48/0x94 [<ffffffff8067872a>] tty_write+0x1a/0x30 In regs_get_kernel_stack_nth, regs->sp contains an arbitrary value. arch_rethook_trampoline saves the registers from the probed function in a struct pt_regs. sp is not saved. Instead, sp is decremented for arch_rethook_trampoline's local stack. Fix this crash and save the original sp along with the other registers. Use a0 as a temporary register, it is overwritten anyway. [pjw@kernel.org: added Fixes tag; cc'ed stable]
In the Linux kernel, the following vulnerability has been resolved: irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure imsic_early_acpi_init() allocates a firmware node before setting up the IMSIC state. If imsic_setup_state() fails, the function returns without freeing the allocated fwnode. Free the fwnode and clear the global pointer on this error path, matching the cleanup already done when imsic_early_probe() fails. [ tglx: Use a common cleanup path instead of copying code around ]
In the Linux kernel, the following vulnerability has been resolved: s390/monwriter: Reject buffer reuse with different data length When data buffers are reused, e.g. for interval sample records, the first record determines the data length, and the size of the buffer for user copy. Current monwriter code does not check if the data length was changed for subsequent records, which also would never happen for valid user programs. However, a malicious user could change the data length, resulting in out of bounds user copy to the kernel buffer, and memory corruption. By default, the monwriter misc device is created with root-only permissions, so practical impact is typically low. Fix this by checking for changed data length and rejecting such records.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix SQB pointer leak on init failure otx2_init_hw_resources() initializes SQ aura and pool resources before several later setup steps. On failure, err_free_sq_ptrs only frees SQB pages, leaving the per-SQ sqb_ptrs arrays behind. Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs even when sq->sqe has not been allocated yet. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an OcteonTX2 PF device and the corresponding AF mailbox setup to test with, no runtime testing was able to be performed.
In the Linux kernel, the following vulnerability has been resolved: llc: fix SAP refcount leak in llc_ui_autobind() llc_ui_autobind() opens a SAP after choosing a dynamic LSAP. llc_sap_open() returns a reference owned by the caller, and llc_sap_add_socket() takes a second reference for the socket's membership in the SAP hash tables. llc_ui_bind() drops the caller's reference after adding the socket, but llc_ui_autobind() keeps it. When the socket is closed, llc_sap_remove_socket() releases only the socket reference, leaving the SAP on llc_sap_list with sk_count == 0. This is user-visible because repeated autobind and close cycles can consume all dynamic SAP values and make later autobinds fail with -EUSERS. Drop the caller's reference after a successful autobind, matching llc_ui_bind()'s ownership model.
In the Linux kernel, the following vulnerability has been resolved: net: macb: drop in-flight Tx SKBs on close The MACB driver has since forever leaked the outgoing SKBs that have not yet been marked as completed. They live in queue->tx_skb which gets freed without remorse nor checking. macb_free_consistent() gets called in a few codepaths, but only close will trigger the added expressions. In macb_open() and macb_alloc_consistent() failure cases, queues' tx_skb just got allocated and are empty.
In the Linux kernel, the following vulnerability has been resolved: cpu/hotplug: Fix NULL kobject warning in cpuhp_smt_enable() On arm64, when booting with `maxcpus` greater than the number of present CPUs (e.g., QEMU -smp cpus=4,maxcpus=8), some CPUs are marked as 'present' but have not yet been registered via register_cpu(). Consequently, the per-cpu device objects for these CPUs are not yet initialized. In cpuhp_smt_enable(), the code iterates over all present CPUs. Calling _cpu_up() for these unregistered CPUs eventually leads to sysfs_create_group() being called with a NULL kobject (or a kobject without a directory), triggering the following warning in fs/sysfs/group.c: WARNING: fs/sysfs/group.c:137 at internal_create_group+0x41c/0x4bc, CPU#2: sh/181 [...] Call trace: internal_create_group+0x41c/0x4bc (P) sysfs_create_group+0x18/0x24 topology_add_dev+0x1c/0x28 cpuhp_invoke_callback+0x104/0x20c __cpuhp_invoke_callback_range+0x94/0x11c _cpu_up+0x200/0x37c When booting with ACPI, arm64 smp_prepare_cpus() currently sets all enumerated CPUs as "present" regardless of their status in the MADT. This causes issues with SMT hotplug control. For instance, with QEMU's "-smp 4,maxcpus=8" configuration, the MADT GICC entries are populated as follows: 1. The first four CPUs: `Enabled` set but `Online Capable` not set. 2. The remaining four CPUs: `Online Capable` set but `Enabled` not set to support potential hot-plugging. Fix this by: 1. When booting with ACPI, checking the ACPI_MADT_ENABLED flag in the GICC entry before calling set_cpu_present() during SMP initialization. 2. Properly managing the present mask in acpi_map_cpu() and acpi_unmap_cpu() to support actual CPU hotplug events, This aligns with other architectures like x86 and LoongArch. 3. Update the arm64 CPU hotplug documentation to no longer state that all online-capable vCPUs are marked as present by the kernel at boot time. This ensures that only physically available or explicitly enabled CPUs are in the present mask, keeping the SMT control logic consistent with the actual hardware state.
In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list A pseudo-locked group's RMID is freed when it is created. On unmount rmdir_all_sub() unconditionally frees all RMID of all groups, resulting in a double-free of the pseudo-locked group's RMID. The consequence of this is that the original free results in the pseudo-locked group's RMID being added to the rmid_free_lru linked list and the second free then attempts to add the same RMID entry to the rmid_free_lru again. Do not double-free a pseudo-locked group's RMID.
In the Linux kernel, the following vulnerability has been resolved: riscv: Prevent NULL pointer dereference in machine_kexec_prepare() A NULL pointer dereference issue is noticed in riscv's machine_kexec_prepare(), where image->segment[i].buf might be NULL and copied unchecked. The NULL buf comes from ima_add_kexec_buffer(), where kbuf is added by kexec_add_buffer(), but kbuf.buffer is NULL, then it is copied without a check in machine_kexec_prepare(): kexec_file_load -> kimage_file_alloc_init() -> kimage_file_prepare_segments() -> ima_add_kexec_buffer() -> kexec_add_buffer() -> machine_kexec_prepare() -> memcpy() Address this by adding a check before the data copy attempt.
In the Linux kernel, the following vulnerability has been resolved: s390/diag: Add missing array_index_nospec() call to memtop_get_page_count() 'level' is user space controlled and used to read from an array. Add the missing array_index_nospec() call to prevent speculative execution.
In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: rebind mm mempolicy to effective_mems, not mems_allowed Creating a child cpuset where cpuset.mems is never set leads to a div/0 when a VMA mempolicy with MPOL_F_RELATIVE_NODES rebinds in response to a CPU hotplug event. Reproduction steps: 1) Create a cgroup w/ cpuset controls (do not set cpuset.mems) 2) Move the task into the child cpuset 3) Create a VMA mempolicy for that task with MPOL_F_RELATIVE_NODES 4) unplug and hotplug a cpu echo 0 > /sys/devices/system/cpu/cpu1/online echo 1 > /sys/devices/system/cpu/cpu1/online 5) mempolicy rebind does a div/0 in mpol_relative_nodemask on the call to __nodes_fold() The cpuset code passes (cs->mems_allowed) which is not guaranteed to have nodes to the rebind routine. Use cs->effective_mems instead, which is guaranteed to have a non-empty nodemask once we reach that code path. [ david: add a comment, slightly rephrase description ]
In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: Fix possible nullptr KP in HWV cleanup/on-check Should probe fail for HW_VOTER type power domains, this driver was unconditionally trying to perform cleanup for DIRECT_CTL domains, but only after checking if the target domain is powered on... with the DIRECT_CTL scpsys_domain_is_on() code again. And there's more: the scpsys_domain_is_on() function is also being unconditionally used in the probe path, for any power domain that has flag MTK_SCPD_KEEP_DEFAULT_OFF! This bug was never experienced by anyone because the HWV domains never failed probe, and because none of those is declared with the aforementioned flag - but it's still something critical. In order to fix this, add a check for MTCMOS Type and, based on that, call the correct functions for an "is on" check, and also do the same for the cleanup path, calling the correct functions for the "power off" action. For the latter, since there's a call to pm_genpd_remove() right before calling power_off, be cautious and add a variation of the power off functions (with a _internal suffix) for those to get a pointer to scpsys_domain instead of one to generic_pm_domain as, even if that's still working, this is way too much fragile and would break at some point.
In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx: Fix i.MX8MP VC8000E power up sequence Per errata[1]: ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX power up/down cycling. Description: VC8000E reset de-assertion edge and AXI clock may have a timing issue. Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is de-asserted by HW) Add a bool variable is_errata_err050531 in 'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround is needed. If is_errata_err050531 is true, first clear the clk before powering up gpc, then enable the clk after powering up gpc. [1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: free mlx5_st_idx_data on final dealloc Workloads that repeatedly allocate and release mkeys carrying TPH steering-tag hints (e.g. churning RDMA MRs) leak one struct mlx5_st_idx_data per cycle; kmemleak flags it as unreferenced and the kmalloc slab grows over time. When the last reference to an ST table entry is dropped, mlx5_st_dealloc_index() removed the entry from idx_xa but the backing mlx5_st_idx_data allocation was never freed. Free idx_data after the xa_erase() so the lifetime of the bookkeeping struct matches the lifetime of the ST entry it tracks.
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix memory leak in ieee80211_register_hw() If kmemdup() fails while copying supported band structures, the error path jumps to fail_rate. This skips rate_control_deinitialize() and leaks the initialized local->rate_ctrl. Fix this by adding a fail_band label that shares the rate-control cleanup path before falling through to the remaining teardown. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have a suitable mac80211 device/driver combination to test with, no runtime testing was able to be performed.
In the Linux kernel, the following vulnerability has been resolved: memstick: ms_block: reject a card that reports too many blocks msb_ftl_initialize() computes the zone count from the card block count with no bound: msb->zone_count = msb->block_count / MS_BLOCKS_IN_ZONE; ... for (i = 0; i < msb->zone_count; i++) msb->free_block_count[i] = MS_BLOCKS_IN_ZONE; msb->block_count is a card value. msb_read_boot_blocks() reads number_of_blocks from the card boot page and byte swaps it. free_block_count is a fixed int[MS_MAX_ZONES]. MS_MAX_ZONES is 16, so the valid indices are 0 to 15. The init loop above indexes it by zone_count. msb_mark_block_used() and msb_mark_block_unused() index it by pba / MS_BLOCKS_IN_ZONE, for pba up to block_count - 1. A card may report up to 65535 blocks. A block_count above 8192 (MS_MAX_ZONES * MS_BLOCKS_IN_ZONE) lets the pba index reach 16. That writes past free_block_count[] and corrupts struct msb_data. A larger count runs the init loop past the end too. A real Memory Stick has at most 16 zones. So it has at most 8192 blocks. msb_ftl_initialize() now rejects a card that reports more than MS_MAX_ZONES * MS_BLOCKS_IN_ZONE blocks.
In the Linux kernel, the following vulnerability has been resolved: reset: sunxi: fix memory region leak on ioremap failure In sunxi_reset_init(), when ioremap() fails, the memory region obtained via request_mem_region() is not released, leading to a resource leak. Add an err_mem_region label to properly release the memory region before freeing the data structure.
In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix permanently busy scans after multiple roam iterations In order for the firmware to sleep, the driver has to confirm a previously received sleep request. The normal sequence of evets goes like this: EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm -> SLEEP -> EVENT_AWAKE -> AWAKE. Before sending the sleep-confirm command, the driver must make sure there are no commands either running or waiting to be completed. mwifiex_ret_802_11_associate() unconditionally sets ps_state = PS_STATE_AWAKE when it processes the association command response, outside of the normal powersave management flow. If EVENT_SLEEP arrives while the association command is in flight, ps_state is PRE_SLEEP when the association command response is parsed, and the forced AWAKE overwrites it. The deferred sleep-confirm is never sent. A subsequent scan_start command is correctly acknowledged, but the firmware doesn't generate scan_result events. The scan request never finishes, and additional requests from userspace fail with -EBUSY. After testing on both IW412 and W8997, I could only trigger the bug on the IW412 and observed the firmwares behave differently. On the IW412 the firmware still sends EVENT_SLEEP while the authentication / association process is ongoing. A W8997 under the same conditions seems to suppress power-save for the duration of the association, so PRE_SLEEP never coincided with the association response even after extended periods of testing using the loops described below (>12hours). On the IW412, the delay between commands that triggers an EVENT_SLEEP was empirically determined to be ~20ms. This delay can naturally occur when the driver is outputting debugging information (debug_mask = 0x00000037), in which situation the busy scans issue is repeatable while running "test 1)" as described below. If the delay between commands is less than ~20ms, the firmware stays awake and the issue was not reproducible running the same test. The host_mlme=false path also behaves differently. In this case, the entire authentication / association transaction is executed by one command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit EVENT_SLEEP while the command is running. Remove the assignment so the ps_state is only manipulated in the paths that are related to powersave event handling and on the main workqueue for correct sleep confirmation. The following loop tests were performed (with debugging output enabled): 1) force roaming between two AP's, one 5GHz and one 2.4GHz, same SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s between iterations. 2) force a disconnection to AP 1 and a connection to AP 2, test scan. Use wpa_cli to trigger the connection changes, sleep 2s between iterations. Each test ran in each device for at least 3 hours.
In the Linux kernel, the following vulnerability has been resolved: mtd: virt-concat: free duplicate generated name Every MTD registration runs mtd_virt_concat_create_join(). Once a virtual concat has already been registered, the function builds the same name again and takes the equal-name branch. That branch skips to the next item without freeing the newly allocated string. Free the temporary name before continuing.
In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore esdhc_change_pinstate() checks for pins_100mhz and pins_200mhz at the top of the function and returns -EINVAL if either is not defined. This prevents the default case from ever being reached, which means devices with a sleep pinctrl state but without high-speed pin states (100mhz/ 200mhz) can never restore their default pin configuration. Move the IS_ERR checks for pins_100mhz and pins_200mhz into their respective switch cases.
In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt When using WIFI out-of-band wakeup, an "irq xxx: nobody cared" warning occurs. This happens because the usdhc interrupt is not disabled during system suspend when device_may_wakeup() returns false. The sequence of events leading to this issue: 1. System enters suspend without disabling usdhc interrupt (because device_may_wakeup() returns false for usdhc device) 2. WIFI out-of-band wakeup triggers system resume via GPIO interrupt 3. WIFI sends a Card interrupt before usdhc has fully resumed 4. usdhc is still in runtime suspend state and cannot handle the interrupt properly 5. The unhandled interrupt triggers "nobody cared" warning Fix this by unconditionally disabling the usdhc interrupt during suspend and re-enabling it during resume, regardless of the wakeup capability. This ensures no interrupts are processed during the suspend/resume transition.
In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to simplify error handling. pm_runtime_resume_and_get() automatically drops the usage counter on failure, avoiding the need for a separate pm_runtime_put_noidle() call. If it fails, the device is unclocked and accessing hardware registers would cause a kernel panic, so return the error immediately.
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in f2fs_balance_fs() When the f2fs filesystem space is nearly exhausted, we encounter deadlock issues as below: INFO: task A:1890 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204 Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 folio_wait_bit+0x20/0x38 folio_wait_writeback+0x54/0xc8 truncate_inode_partial_folio+0x70/0x1e0 truncate_inode_pages_range+0x1b0/0x450 truncate_pagecache+0x54/0x88 f2fs_file_write_iter+0x3e8/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:11 state:D stack:0 pid:2680853 tgid:2680853 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 __filemap_get_folio+0x214/0x348 pagecache_get_page+0x20/0x70 f2fs_get_read_data_page+0x150/0x3e8 f2fs_get_lock_data_page+0x2c/0x160 move_data_page+0x50/0x478 do_garbage_collect+0xd38/0x1528 f2fs_gc+0x240/0x7e0 f2fs_balance_fs+0x1a0/0x208 f2fs_write_single_data_page+0x6e4/0x730 f2fs_write_cache_pages+0x378/0x9b0 f2fs_write_data_pages+0x2e4/0x388 do_writepages+0x8c/0x2c8 __writeback_single_inode+0x4c/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x200 INFO: task kworker/u8:8:2641297 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:8 state:D stack:0 pid:2641297 tgid:2641297 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_write_inode+0xf4/0x328 __writeback_single_inode+0x370/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x20 INFO: task B:1902 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:B state:D stack:0 pid:1902 tgid:1626 ppid:1153 flags:0x0000020c Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_map_blocks+0x94c/0x1110 f2fs_file_write_iter+0x228/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task sync:2769849 blocked for more than 120 seconds. Tainted: G ---truncated---
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs() When we mount device w/ gc_merge mount option, we may suffer below potential deadlock: Kworker GC trehad Truncator - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page - folio_start_writeback --- set writeback flag on folio - f2fs_outplace_write_data : cached folio in internal bio cache - f2fs_balance_fs - wake_up(gc_thread) : wake up gc thread to run foreground GC - finish_wait(fggc_wq) : wait on the waitqueue --- wait on GC thread to finish the work - truncate_inode_pages_range - __filemap_get_folio(, FGP_LOCK) --- lock folio - truncate_inode_partial_folio - folio_wait_writeback --- wait on writeback being cleared - do_garbage_collect - move_data_page - f2fs_get_lock_data_folio - lock on folio --- blocked on folio's lock In order to avoid such deadlock, let's call below functions to commit cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did in NOGC_MERGE path. - f2fs_submit_merged_write(sbi, DATA); - f2fs_submit_all_merged_ipu_writes(sbi);
In the Linux kernel, the following vulnerability has been resolved: usb: atm: ueagle-atm: wait for pre-firmware load in .disconnect() ueagle-atm uses the asynchronous request_firmware_nowait() in .probe(), but does not wait for its completion, not even in .disconnect(); so, if the device is unplugged meanwhile, its teardown runs concurrently with that. Even though this inconsistency is worth addressing on its own, it has also triggered several bug reports in syzbot over the years (some auto-closed) where the firmware sysfs fallback mechanism (CONFIG_FW_LOADER_USER_HELPER) creates a firmware subdirectory in the device directory during its removal, which might hit unexpected conditions in kernfs, apparently, depending at which point the add and remove operations raced. (See links.) The pattern is: usb ?-?: Direct firmware load for ueagle-atm/eagle?.fw failed with error -2 usb ?-?: Falling back to sysfs fallback for: ueagle-atm/eagle?.fw <ERROR> Call trace: ... kernfs_create_dir_ns sysfs_create_dir_ns create_dir kobject_add_internal kobject_add_varg kobject_add class_dir_create_and_add get_device_parent device_add fw_load_sysfs_fallback fw_load_from_user_helper firmware_fallback_sysfs _request_firmware request_firmware_work_func ... (Some variations are observed, after fw_load_sysfs_fallback(), e.g., [1].) While the kernfs side is being looked at, the ueagle-atm side can be fixed by waiting for the pre-firmware load in the .disconnect() handler. This change has a similar approach to previous work by Andrey Tsygunka [2] (wait_for_completion() in .disconnect()), but it is relatively different in design/implementation; using the Originally-by tag for credit assignment. This has been tested with: - synthetic reproducer to check the error path; - USB gadget (virtual device) to check the firmware upload path; - QEMU device emulator to check the device ID re-enumeration path; (The latter two were written by Claude; no other code/text in this commit.) Links (year first reported): 2025 https://syzbot.org/bug?extid=ce1e5a1b4e086b43e56d 2025 https://syzbot.org/bug?extid=9af8471255ac36e34fd4 2024 https://syzbot.org/bug?extid=306212936b13e520679d 2023 https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2 2022 https://syzbot.org/bug?extid=782984d6f1701b526edb 2021 https://syzbot.org/bug?id=f3f221579f4ef7e9691281f3c6f56c05f83e8490 2021 https://syzbot.org/bug?id=84d86f0d71394829df6fc53daf6642c045983881 2021 https://syzbot.org/bug?id=3302dc1c0e2b9c94f2e8edb404eabc9267bc6f90 [1] https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2 [2] https://lore.kernel.org/lkml/20250410093146.3776801-2-aitsygunka@yandex.ru/
In the Linux kernel, the following vulnerability has been resolved: liveupdate: validate session type before performing operation The sessions ioctls are not applicable to all session types. PRESERVE_FD is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only valid for incoming session. Calling a incoming ioctl on an outgoing session is invalid and can cause file handlers to run into unexpected errors. For example, a user can create a (outgoing) session, preserve a memfd, and then immediately do a retrieve without doing a kexec in between. This would result in memfd's retrieve handler to run. The handlers expects to be called from a post-kexec context, and will try to do a kho_restore_vmalloc() or kho_restore_folio() to try and restore memory. KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but since this is considered an internal error and KHO throws out a bunch of WARN()s. Associate a type with each ioctl op and validate the type in luo_session_ioctl() before dispatching the ioctl handler to make sure the op is being called for the right session type.
In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix deadlock if uvc_status_stop is called from async_ctrl.work If a UVC camera has an asynchronous control, uvc_status_stop may be called from async_ctrl.work: uvc_ctrl_status_event_work() uvc_ctrl_status_event() uvc_ctrl_clear_handle() uvc_pm_put() uvc_status_put() uvc_status_stop() cancel_work_sync() This will cause a deadlock, since cancel_work_sync will wait for uvc_ctrl_status_event_work to complete before returning. Fix this by returning early from uvc_status_stop if we are currently in the work function. flush_status now remains false until uvc_status_start is called again, ensuring that uvc_ctrl_status_event_work won't resubmit the URB.
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix leak of released call in recvmsg(MSG_PEEK) Fix rxrpc_recvmsg() to also drop the ref it holds on an already-released call if MSG_PEEK is in force (the function holds a ref on the call irrespective of whether MSG_PEEK is specified or not).
In the Linux kernel, the following vulnerability has been resolved: afs: fix NULL pointer dereference in afs_get_tree() afs_alloc_sbi() uses kzalloc for memory allocation. And, if ctx->dyn_root is not null, as->cell and as->volume are null. In trace_afs_get_tree() they are dereferenced. KASAN error message: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 18478 Comm: syz-executor.7 Not tainted 5.10.246-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:perf_trace_afs_get_tree+0x1d9/0x550 include/trace/events/afs.h:1365 Call Trace: trace_afs_get_tree include/trace/events/afs.h:1365 [inline] afs_get_tree+0x922/0x1350 fs/afs/super.c:599 vfs_get_tree+0x8e/0x300 fs/super.c:1572 do_new_mount fs/namespace.c:3011 [inline] path_mount+0x14a5/0x2220 fs/namespace.c:3341 do_mount fs/namespace.c:3354 [inline] __do_sys_mount fs/namespace.c:3562 [inline] __se_sys_mount fs/namespace.c:3539 [inline] __x64_sys_mount+0x283/0x300 fs/namespace.c:3539 do_syscall_64+0x33/0x50 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: fbcon: fix NULL pointer dereference for a console without vc_data fbcon_new_modelist() runs when a framebuffer's modelist changes. For each console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and passes the vc_num to fbcon_set_disp(). This assumes a console with a mode set has a vc_data, but it can be NULL. fbcon_set_disp() sets fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the mode set after the vc_data is freed. fbcon_new_modelist() then dereferences the NULL vc_data. Keep fb_display[i].mode set only while the console has a vc_data. Check vc_data before setting the mode in fbcon_set_disp(), and clear the mode in fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips such consoles.
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix leak when pinning ubuf pages When pin_user_pages_fast() returns fewer pages than requested, the pages that were successfully pinned are not released, leading to a leak. Fix this by unpinning any partially pinned pages before returning failure.
In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: inno-hdmi: Switch to drmm_kzalloc() Driver makes use of drmm_encoder_init() to initialize the encoder and automatically handle the cleanup by registering drm_encoder_cleanup() with drmm_add_action(). However, the internal structure containing the encoder part gets allocated with devm_kzalloc(), which happens while component_bind_all() is being called from Rockchip DRM driver. The component framework further ensures it is deallocated as part of releasing all the resources claimed during bind, which is triggered from component_unbind_all(). When the reference to the DRM device gets eventually dropped via drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release() attempts to access the now released encoder structure, leading to use-after-free. Ensure driver's internal structure is still reachable on encoder cleanup by switching from a device-managed allocation to a drm-managed one.
In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Switch to drmm_kzalloc() Driver makes use of drmm_encoder_init() to initialize the encoder and automatically handle the cleanup by registering drm_encoder_cleanup() with drmm_add_action(). However, the internal structure containing the encoder part gets allocated with devm_kzalloc(), which happens while component_bind_all() is being called from Rockchip DRM driver. The component framework further ensures it is deallocated as part of releasing all the resources claimed during bind, which is triggered from component_unbind_all(). When the reference to the DRM device gets eventually dropped via drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release() attempts to access the now released encoder structure, leading to use-after-free. Ensure driver's internal structure is still reachable on encoder cleanup by switching from a device-managed allocation to a drm-managed one.
In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges VMAs marked with VM_IO or VM_PFNMAP are not backed by struct page objects, which GPUSVM requires in order to operate correctly. In particular, get_pages() relies on hmm_range_fault() to resolve struct pages for the target range. Attempting to create an SVM range on such VMAs results in repeated get_pages() failures and can lead to an infinite loop inside a driver’s page‑fault handler. Prevent this by rejecting ranges on VM_IO or VM_PFNMAP VMAs and returning -EIO.