Linux
Monthly
In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event() magicmouse_raw_event() handles DOUBLE_REPORT_ID (0xf7) packets, which pack two touch reports into one, by splitting the packet and calling itself on each half. The only guard against runaway recursion is a "size < 1" check, which stops zero-sized calls but does not bound the recursion depth. A malicious HID device that matches this driver can send a report starting with DOUBLE_REPORT_ID and filled with the sequence [0xf7, 0x00]. Each level consumes two bytes and recurses on the remainder, so an incoming report of up to HID_MAX_BUFFER_SIZE (16 KiB) drives roughly 8000 nested calls. That easily exhausts the 16 KiB kernel stack, leading to a stack overflow: a panic with CONFIG_VMAP_STACK, or memory corruption without it. A double report only ever wraps two normal reports; it is never legitimately nested. Refuse to re-enter the DOUBLE_REPORT_ID case from a recursive call so the recursion depth is bounded to two, while all valid packets keep being parsed exactly as before.
In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: do not keep a stale msc->input if no input is claimed magicmouse_input_mapping() caches the first hid_input's input_dev in msc->input while the report descriptor is parsed, and the rest of the driver treats a non-NULL msc->input as proof that an input device was registered. That does not hold on the hid-input error path. If hidinput_connect() fails -- for instance because input_register_device() returns an error -- it unwinds through hidinput_disconnect(), which frees every input_dev it created, including the one cached in msc->input. The failure does not abort the probe. hid_connect() only skips the claim: if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev, connect_mask & HID_CONNECT_HIDINPUT_FORCE)) hdev->claimed |= HID_CLAIMED_INPUT; and the "device has no listeners" bailout below it does not fire for this driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad 2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore returns 0 and magicmouse_probe() continues with msc->input pointing at freed memory. Being non-NULL, it passes the "input not registered" check in probe and the NULL checks in ->raw_event and ->event, so the next input report dereferences freed memory. Clear msc->input when the HID core did not claim an input device, so the existing NULL checks cover this case as well.
In the Linux kernel, the following vulnerability has been resolved: HID: core: fix OOB read of field->usage in hid_set_field() hid_set_field() hands field->usage + offset to hid_dump_input() before the guard that bounds offset: hid_dump_input(field->report->device, field->usage + offset, value); if (offset >= field->report_count) { hid_err(...); return -1; } Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is allocated inline with the hid_field in hid_register_field() and holds field->maxusage entries, so an offset past it reads off the end of the kvzalloc()ed allocation and into a neighbouring object. Had the guard run first, offset < report_count <= maxusage would already have confined the pointer to the array. A caller supplies such an offset today. picolcd_fb_send_tile() validates only report->maxfield before issuing hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its offsets are fixed at 11..42 and are never checked against the bound field. When the device registers that field with fewer usages, the framebuffer deferred-io work drives the read on every tile. KASAN reports a 4-byte slab-out-of-bounds read in hid_dump_input() below hid_set_field(), and the same boot logs "offset (1) exceeds report_count (1)" from the guard that runs only afterwards. Move the hid_dump_input() call below the guard. Because field->maxusage >= field->report_count, the guard then establishes that field->usage + offset lies inside the array before it is dereferenced, for every caller and without changing behaviour on the valid path. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
In the Linux kernel, the following vulnerability has been resolved: HID: pidff: fix OOB write when hid->inputs is empty hid_pidff_init_with_quirks() derives its input_dev from list_entry(hid->inputs.next, struct hid_input, list) without first checking that hid->inputs is non-empty. The list member of struct hid_input is at offset 0, so on an empty list list_entry() yields &hid->inputs itself and the following hidinput->input load reads an unrelated member of struct hid_device. dev is then a type-confused pointer, and force-feedback init writes through it: each set_bit(FF_*, dev->ffbit) stores 8 bytes at dev + 192, past the end of the object dev actually aliases, and input_ff_create() adds further writes of a heap pointer and two function pointers. Until hid-universal-pidff the only caller was hid_pidff_init() from usbhid, which runs under HID_CLAIMED_INPUT and therefore always has at least one hid_input. universal_pidff_probe() starts the device with HID_CONNECT_DEFAULT & ~HID_CONNECT_FF and then calls hid_pidff_init_with_quirks() directly whenever the descriptor carries a PID usage page, bypassing that gate. A report descriptor whose only application collection is on HID_UP_PID leaves hid->inputs empty while hid_connect() still succeeds through the hidraw claim, so probe reaches the unguarded list_entry(). The write happens in the USB probe path, on the hotplug workqueue, so plugging in a malicious device is enough to trigger it; no attacker software and no logged-in user are required. KASAN reports an 8-byte out-of-bounds write in hid_pidff_init_with_quirks() reached from universal_pidff_probe(). Check for an empty list before deriving dev and return -ENODEV, as the other HID force-feedback drivers already do. universal_pidff_probe() propagates the error and unwinds. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
In the Linux kernel, the following vulnerability has been resolved: net/ionic: avoid OOB TX partner lookup for hwstamp RXQ The dedicated hardware timestamp RX queue is allocated with q->index equal to lif->ionic->nrxqs_per_lif. The normal txqcqs array only contains the regular queue pairs, so using that index to set rxq->partner can read one entry past txqcqs[] and then write through the derived pointer. Only link RX/TX partners for normal queue-pair indexes. Leave the hwstamp RX queue unpaired, and make the XDP_TX path abort cleanly if an RX queue has no TX partner.
In the Linux kernel, the following vulnerability has been resolved: futex/pi: Reject cross-mm private futex owners A private futex key borrows the waiter's mm without taking an mm_users reference. Nevertheless, attach_to_pi_owner() currently accepts an owner from a different address space and copies the private key into the owner's PI state. When that owner exits, exit_pi_state_list() uses the saved key to find the hash bucket and acquires a reference to the waiter's private hash. If the last user of the waiter's mm exits concurrently, futex_hash_free() frees the hash while the owner still uses its bucket and reference. Prevent this by validating in attach_to_pi_owner() that, for private futexes, the owner mm and waiter mm are the same. Perform the check with the owner's pi_lock held and after validating owner::futex::state to serialize against a concurrent PI-state exit cleanup. [ tglx: Amended comment ]
In the Linux kernel, the following vulnerability has been resolved: futex/pi: Plug private futex exec() race The check for private futexes whether the waiter's mm, which is stored in the futex_key and copied into the pi_state, is the same as the owner's mm is not sufficient for exec(). exec() has a gap where the mm check fails to give the correct answer: exec() ... exec_release_mm() futex_exec_release() tsk::futex::exit_state = EXITING; cleanup_robust_list(); 1) tsk::futex::exit_state = OK; ... old_mm = tsk::mm; 2) tsk::mm = ->mm; Between #1 and #2 the check for the mm is wrong as that mm is about to be swapped out and eventually freed. Plug this gap by: 1) Setting tsk::futex::exit_state to FUTEX_STATE_DEAD in futex_exec_release() 2) Setting tsk::futex::exit_state to FUTEX_STATE_OK after the mm has been switched. From a futex point of view the task is dead after it finished the robust list cleanup up to the point where it sets the state to OK again.
In the Linux kernel, the following vulnerability has been resolved: futex: Fix race in futex_pivot_pending() during private hash resize A task performing a custom private hash resize can remain blocked in uninterruptible sleep indefinitely. The hung-task detector reports: INFO: task futex-resizer:314 blocked for more than 10 seconds. task:futex-resizer state:D stack:14824 pid:314 tgid:312 ppid:311 Call Trace: __schedule+0x521/0xf30 schedule+0x22/0xa0 futex_hash_allocate+0x3db/0x490 __do_sys_prctl+0x6f5/0xbd0 do_syscall_64+0xf9/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: hung_task: blocked tasks futex_pivot_pending() allows the resize request to continue when either no replacement hash is pending (hash_new == NULL) or the current hash reference count has reached zero. After the final-reference wake, another futex task can complete the pivot between the two observations: T1 T2 futex_hash_allocate() wait_var_event(mm, ...) futex_pivot_pending(mm) hash_new != NULL futex_hash() futex_ref_get(old) -> false futex_pivot_hash(mm) hash_new = NULL __futex_pivot_hash(mm, new) rcu_assign_pointer(hash, new) fph = rcu_dereference(hash) /* new */ futex_ref_is_dead(fph) -> false schedule() The pivot changes the state from hash_new != NULL with a dead current hash to hash_new == NULL with a live current hash. Because futex_pivot_pending() reads hash_new and hash without serialization, the resize task can observe hash_new in the pre-pivot state and hash in the post-pivot state, causing futex_pivot_pending() to return false even though the pivot has completed. The task then goes to sleep after the wakeup has already been consumed. Serialize state reads in futex_pivot_pending() using futex_mm_phash::lock. This guarantees that futex_pivot_pending() observes hash_new and hash atomically, eliminating the race condition.
In the Linux kernel, the following vulnerability has been resolved: futex: Fix race on the initial mm->futex.phash.ref allocation futex_hash_allocate() allocates mm->futex.phash.ref without any locking. Commit d9b05321e21e ("futex: Move futex_hash_free() back to __mmput()") moved the allocation here and assumed that the process has just a single thread at this point. Commit ee9dce44362b ("futex: Drop CLONE_THREAD requirement for private default hash alloc") widened need_futex_hash_allocate_default() to cover any CLONE_VM clone, but left out vfork because the parent is suspended and cannot race. That no longer holds once vfork is nested. If a vfork child calls vfork again and is then killed with SIGKILL, the parent is released from its vfork wait and runs concurrently with the grandchild in the same mm. Neither of them went through futex_hash_allocate_default(). When both call prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_SET_SLOTS) at the same time, each one sees mm->futex.phash.ref as NULL and stores its own percpu counter. Only the last store survives. The counter stored first is no longer reachable from the mm, so the references on it are not seen by __futex_ref_atomic_end(). A private hash that still has references is then considered dead and freed, and a task that still holds one of its buckets writes into freed memory in futex_q_lock(). Store the counter once with cmpxchg() and let the loser free_percpu() its own. The initial reference has to be taken before the store, otherwise another task can install a private hash while the counter is still 0.
In the Linux kernel, the following vulnerability has been resolved: HID: asus: fix missing hid_is_usb() check to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue.
In the Linux kernel, the following vulnerability has been resolved: HID: huawei: fix missing hid_is_usb() check to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue.
In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler() joycon_ctlr_read_handler() casts an incoming HID input report to struct joycon_input_report and parses it, guarding the cast only with a 12-byte length check: if (size >= 12) /* make sure it contains the input report */ joycon_parse_report(ctlr, (struct joycon_input_report *)data); struct joycon_input_report is 49 bytes: a 13-byte header followed by a union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report() -> joycon_parse_imu_report() walks that union (struct offsets 13..48), so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes the guard yet is read up to 37 bytes past its declared length. The over-read bytes are decoded into accelerometer/gyroscope values and forwarded to userspace through the "(IMU)" input device, leaking driver-internal memory. data[0] and size are fully controlled by a malicious or spoofed Joy-Con/Pro Controller. Receive buffers are sized to the maximum report length, so this is an over-read within the allocation rather than a slab OOB, but the decoded bytes still reach userspace. The sibling subcmd path in joycon_ctlr_handle_event() already bounds the same cast correctly: if (size < sizeof(struct joycon_input_report) || data[0] != JC_INPUT_SUBCMD_REPLY) break; Use the same sizeof(struct joycon_input_report) bound here.
In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: register input device after capabilities are set input_register_device() exposes the device to userspace immediately. In joycon_input_create() it was called before joycon_config_rumble() configures the FF_RUMBLE capability and the memless force-feedback device, so a concurrent EVIOCSFF could dereference a NULL dev->ff. Registering early also means the initial udev event lacks button and axis information, which can make input managers ignore the device. Move input_register_device() to the end of joycon_input_create(), after all capabilities, the IMU input device and the force-feedback callbacks have been configured.
In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: stop device IO before hid_hw_stop on probe failure nintendo_hid_probe() calls hid_device_io_start() before joycon_init() and joycon_leds_create(). If either fails, the error path jumps to err_close which calls hid_hw_close()/hid_hw_stop() without first calling hid_device_io_stop(). hid_hw_stop() does not stop device IO, so hid_input_report() may still run and access driver data that is being torn down, resulting in a use-after-free. Add an err_io_stop label that calls hid_device_io_stop() before hid_hw_close(), and point the two post-io_start error paths at it.
In the Linux kernel, the following vulnerability has been resolved: HID: rapoo: fix missing hid_is_usb() check to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. Add a dependency on USB_HID for hid_is_usb(), as other HID drivers do; the alternative would be to provide a simple stub implementation on !USB_HID builds. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue.
In the Linux kernel, the following vulnerability has been resolved: HID: ft260: fix stack-use-after-return write in I2C read race ft260_i2c_read() points dev->read_buf at a caller-supplied buffer (often an on-stack variable), arms a completion and waits up to five seconds for the device to return the data. The HID input callback ft260_raw_event() runs in the input/IRQ path, independent of the dev->lock mutex held by the read path, and copies the device-supplied payload into dev->read_buf after a plain NULL check. These two paths share read_buf, read_idx and read_len with no serialization. If the device delays its response until the read times out, ft260_i2c_read() resets the controller, clears read_buf and returns, unwinding the stack frame the buffer lived in. A response that arrives at that moment lets ft260_raw_event() pass the NULL check and then memcpy() the device-controlled payload into the now-freed stack location, a bounded but attacker-influenced stack-use-after-return write triggerable by malicious or malfunctioning hardware. Add a dedicated spinlock that serializes every access to read_buf, read_idx and read_len. ft260_raw_event() now holds it across the NULL check, the memcpy and the index update, while the read path takes it when arming and when clearing the buffer, so the teardown can no longer slip between the check and the copy.
In the Linux kernel, the following vulnerability has been resolved: HID: sensor: custom: Fix use-after-free in enable_sensor enable_sensor_store() can call set_power_report_state(), which dereferences sensor_inst->power_state and sensor_inst->report_state. These pointers refer to entries in sensor_inst->fields. Create the field attributes before exposing the enable_sensor sysfs attribute, so enable_sensor cannot be accessed before the state it depends on has been initialized. On remove, delete enable_sensor before freeing the field attributes, so a concurrent sysfs write cannot dereference freed memory through power_state or report_state.
In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: fix use-after-free of inrange_timer on remove uclogic_remove() cancels the pen in-range timer and then stops the device: timer_delete_sync(&drvdata->inrange_timer); hid_hw_stop(hdev); timer_delete_sync() only guarantees the timer is idle at that instant. uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop() stops the transport several lines later, and every report with pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer: mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100)); A report landing between the timer_delete_sync() call and the transport teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled. uclogic_remove() then returns and the devm drvdata is freed, while hid_hw_stop() has already freed the input device drvdata->pen_input points at, so when the timer fires ~100 ms later uclogic_inrange_timeout() dereferences freed memory -- a use-after-free in timer-softirq context. Swapping the two calls is not a fix: stopping the device first frees drvdata->pen_input via hidinput_disconnect() while the timer may still be pending, so a timer already armed before removal fires on the freed input device in the window before timer_delete_sync() runs. Use timer_shutdown_sync() before hid_hw_stop() instead. It cancels the timer, waits for a running callback while pen_input is still valid, and prevents any further re-arming -- a later mod_timer() from an in-flight report is silently ignored -- so the timer is provably dead before hid_hw_stop() frees the inputs. This is the ordering the timer core documents for this "timer re-armed from another path" teardown case.
In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: validate initial device info bounds The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO messages that contain a HID descriptor followed by the report descriptor bytes. mousevsc_on_receive_device_info() trusts bLength and wDescriptorLength without checking that the received packet contains both byte ranges. A malformed host or backend message can therefore make the guest read past the received VMBus packet while copying the report descriptor. Pass the received initial-device-info size into the parser and reject descriptor lengths that exceed the packet. Impact: A malicious Hyper-V host or backend can crash a guest by sending a short initial device-info message with an oversized HID report descriptor length.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix LE list UAF on reset hci_cc_reset() clears the LE accept and resolving lists without taking hdev->lock. Other command-complete handlers serialize updates to these lists with that lock, and the debugfs readers hold it while walking them. This permits the reset completion and a debugfs read to interleave as follows: hci_rx_work debugfs reader ----------- -------------- lock hdev->lock fetch current entry list_del(entry) kfree(entry) read entry fields The reader then dereferences a freed list entry and may follow its stale next pointer. KASAN reported: BUG: KASAN: slab-use-after-free in white_list_show+0x15f/0x180 Read of size 1 at addr ffff8881015dab16 by task poc/95 Call Trace: white_list_show+0x15f/0x180 seq_read_iter+0x3ff/0x1190 seq_read+0x267/0x3d0 vfs_read+0x177/0xa20 ksys_read+0xf7/0x1c0 Allocated by task 91: hci_bdaddr_list_add+0x1a6/0x3a0 hci_cc_le_add_to_accept_list+0xab/0x140 hci_cmd_complete_evt+0x26c/0x9a0 hci_event_packet+0x454/0xb20 hci_rx_work+0x293/0x730 Freed by task 90: kfree+0x131/0x3c0 hci_bdaddr_list_clear+0xd8/0x160 hci_cc_reset+0x28a/0x370 hci_cmd_complete_evt+0x26c/0x9a0 hci_event_packet+0x454/0xb20 hci_rx_work+0x293/0x730 Take hdev->lock around both list clears. This matches the existing mutation and traversal locking convention.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: validate LE Set CIG Parameters response The Command Complete dispatch validates only the fixed part of the LE Set CIG Parameters response. After that part is pulled from the skb, hci_cc_le_set_cig_params() trusts num_handles and reads each entry in the trailing handle array. Matching num_handles against the command's num_cis does not guarantee that the response contains the advertised handles. A truncated response from a malfunctioning controller can therefore make the handler read beyond the skb data. Validate that the remaining skb data contains all advertised handles. Include this in the existing response validation so malformed responses also follow the established CIG failure handling.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix accept list UAF during suspend hci_update_event_filter_sync() walks hdev->accept_list while sending a synchronous HCI command for each remote-wakeup device. The suspend path holds hdev->req_lock, but accept-list updates are serialized by hdev->lock. Consequently, remove_device() can free the current list entry during the controller wait. The following interleaving causes the use-after-free: hci_update_event_filter_sync() remove_device() fetch accept-list entry hci_set_event_filter_sync() wait for controller response hci_dev_lock() list_del() kfree() hci_dev_unlock() read the freed list.next KASAN reported: BUG: KASAN: slab-use-after-free in hci_suspend_sync+0x835/0x910 Read of size 8 at addr ffff88810bec8440 by task kworker/0:1/10 Workqueue: events vhci_suspend_work Call Trace: hci_suspend_sync+0x835/0x910 hci_suspend_dev+0x182/0x450 process_one_work+0x661/0x1090 worker_thread+0x45b/0xd10 Allocated by task 86: hci_bdaddr_list_add_with_flags+0x1a8/0x400 add_device+0x381/0x820 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 91: kfree+0x131/0x3c0 remove_device+0x429/0xb70 hci_sock_sendmsg+0x1033/0x1ea0 Snapshot the remote-wakeup addresses under hdev->lock. Release the lock before sending HCI commands. Clear the controller event filter before building the snapshot, and skip allocation and the second list traversal when there are no matching entries. This preserves the original filter and scan-state updates without retaining an accept-list node across a controller wait.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: zero the sockaddr before returning it in getname iso_sock_getname() fills a struct sockaddr_iso in place and returns its size without clearing it first, so bytes it does not write are copied to user space from the kernel stack. The getsockname(2) and getpeername(2) paths both run through do_getsockname(), which hands getname() an uninitialized sockaddr_storage on the stack and copies back up to the number of bytes getname() returns, so the driver has to initialize every byte it accounts for. Two ranges are left uninitialized: - struct sockaddr_iso is 10 bytes but only 9 are written (family, iso_bdaddr, iso_bdaddr_type), leaking the trailing pad byte on every call. - for a broadcast peer (BIS_LINK or PA_LINK) the returned length grows by sizeof(struct sockaddr_iso_bc), but only bc_sid, bc_num_bis and bc_bis are filled; bc_bdaddr and bc_bdaddr_type, the first 7 bytes of that structure, are never written. An unprivileged process can open a BTPROTO_ISO socket and reach the pad leak with getsockname(); the broadcast leak needs an established BIS/PA connection. l2cap and rfcomm already memset their sockaddr in getname for the same reason; do the same here.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: reject HCI_CMD_SYNC params_len above 255 mgmt_hci_cmd_sync() checks that the message length agrees with params_len but puts no upper bound on it. params_len is __le16 while the parameter length in the HCI command header is a u8: struct hci_command_hdr { __le16 opcode; __u8 plen; } __packed; hci_cmd_sync_alloc() assigns one to the other: hdr->plen = plen; if (plen) skb_put_data(skb, param, plen); so a params_len of 256 leaves plen at 0 while all 256 bytes are still appended. The frame handed to the driver then declares no parameters and carries 256 of them. On a length framed transport such as H:4 the controller takes the trailing bytes as the start of the next packet. The mgmt socket MTU is HCI_MAX_FRAME_SIZE, so params_len can reach about 1KB this way. Commit 03f1700b9b4d ("Bluetooth: MGMT: reject malformed HCI_CMD_SYNC commands") only made params_len agree with the message length, a value that fits the message but not the header field is still accepted. Reject params_len that does not fit the header field.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_aml: validate firmware segment lengths aml_download_firmware() reads two lengths from the firmware header and uses them to build pointers before checking that the header and segment data are present. A truncated or inconsistent firmware image can make the driver read past firmware->data while constructing TCI commands. Reject images shorter than the header and ensure that the ICCM and DCCM ranges fit within the loaded firmware before downloading either segment.
In the Linux kernel, the following vulnerability has been resolved: futex: Avoid private hash use-after-free on final put futex_private_hash_put() drops the reference to fph before evaluating fph->mm for wake_up_var(). futex_ref_put() enables preemption again before returning. If that put drops the final reference and the task is preempted, another task can pivot to the replacement hash and free the old hash after an RCU grace period. The first task then reads fph->mm from the freed allocation when it resumes. KASAN reports a slab-use-after-free in futex_private_hash_put(), with the read at offset 24 in a freed kmalloc-512 allocation. The allocation and free stacks point to futex_hash_allocate() and the RCU free path, respectively. Load the mm pointer while the fph reference is still held and pass the saved value to wake_up_var(). wake_up_var() uses the pointer as a waitqueue key and does not dereference the mm through it.
In the Linux kernel, the following vulnerability has been resolved: selinux: reject a class permission count below its inherited common security_get_permissions() maps an inherited common's permissions into an array sized by the class's own permissions.nprim, but class_read() takes that nprim verbatim from the policy image and never checks that it covers the common. A class that inherits a common of N permissions while declaring a smaller nprim is accepted, and on load the common's permissions are written past the class-sized array -- an out-of-bounds heap write. Reject a class whose permission count is below its inherited common's. Well-formed policies, where the class count already includes the inherited permissions, are unaffected.
In the Linux kernel, the following vulnerability has been resolved: selinux: do not cancel a policy conversion that never started sel_write_load() calls selinux_policy_cancel() when sel_make_policy_nodes() fails, and that helper dereferences the outgoing policy to cancel its sidtab conversion. On the first policy load there is no outgoing policy: security_load_policy() returns early for that case, before it converts anything, and state->policy is still NULL. A first load that fails while building the selinuxfs tree therefore takes a NULL dereference in selinux_policy_cancel(), reached from a write(2) to /sys/fs/selinux/load. Skip the cancel when there is no old policy, mirroring the check security_load_policy() already makes before it converts.
In the Linux kernel, the following vulnerability has been resolved: selinux: reject a permission value exceeding the class permission count perm_read() bounds a permission value by SEL_VEC_MAX but never by the nprim of the owning class or common, which is taken verbatim from the policy image. security_get_permissions() then writes perms[value - 1] into an nprim-sized kcalloc() array, so a class declaring fewer permissions than its largest permission value drives an out-of-bounds heap write. The top-level symbol tables are validated this way; the nested per-class permission table is not. Reject a permission whose value exceeds nprim, which is already set when perm_read() runs. Well-formed policies are unaffected. [PM: tweak comment for line length]
In the Linux kernel, the following vulnerability has been resolved: clk: qcom: dispcc-eliza: Fix disp_cc_mdss_mdp_clk_src RCG stall on Eliza EVK Eliza EVK (eliza-cqs-evk.dts) does not have display enabled, however its Display Clock Controller is enabled and references parent clocks from DSI PHYs, which causes clock reparenting issues during probe (init) and warning on Eliza EVK: disp_cc_mdss_mdp_clk_src: rcg didn't update its configuration. WARNING: drivers/clk/qcom/clk-rcg2.c:136 at update_config+0xd4/0xe4, CPU#1: udevd/273 ... update_config (drivers/clk/qcom/clk-rcg2.c:136 (discriminator 2)) (P) clk_rcg2_shared_disable (drivers/clk/qcom/clk-rcg2.c:1471) clk_rcg2_shared_init (drivers/clk/qcom/clk-rcg2.c:1540) __clk_register (drivers/clk/clk.c:3959 drivers/clk/clk.c:4368) devm_clk_hw_register (drivers/clk/clk.c:4448 (discriminator 1) drivers/clk/clk.c:4672 (discriminator 1)) devm_clk_register_regmap (drivers/clk/qcom/clk-regmap.c:104) qcom_cc_really_probe (drivers/clk/qcom/common.c:418) qcom_cc_probe (drivers/clk/qcom/common.c:445) disp_cc_eliza_probe (dispcc-eliza.c:?) dispcc_eliza platform_probe (drivers/base/platform.c:1432)
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables_offload: suppress WARN_ON_ONCE for ENOMEM in abort path In nft_flow_rule_offload_abort(), WARN_ON_ONCE(err) is triggered on every error during rollback, including -ENOMEM. Memory allocation failures are expected under low-memory conditions and do not indicate a kernel bug. Trace for example: nft_flow_offload_chain() // FLOW_BLOCK_BIND nft_flow_block_chain() nft_chain_offload_cmd() nft_block_offload_cmd() ->ndo_setup_tc() nsim_setup_tc() flow_block_cb_setup_simple() flow_block_cb_alloc() // fails to -ENOMEM The warning was reproduced on the 5.10 stable kernel under memory pressure via fault injection, but the underlying bug exists in mainline as well, as demonstrated by the ENOMEM trace above. The following splat was triggered during nf_tables transaction processing: WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline] WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591 Modules linked in: CPU: 0 PID: 8567 Comm: syz-executor.0 Not tainted 5.10.260-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline] RIP: 0010:nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591 Call Trace: nf_tables_commit+0x3bd/0x4bd0 net/netfilter/nf_tables_api.c:8604 nfnetlink_rcv_batch+0xb1e/0x1f20 net/netfilter/nfnetlink.c:509 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:579 [inline] nfnetlink_rcv+0x3b3/0x420 net/netfilter/nfnetlink.c:597 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x6cd/0xa00 net/netfilter/af_netlink.c:1340 netlink_sendmsg+0x906/0xe10 net/netfilter/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x155/0x190 net/socket.c:663 ____sys_sendmsg+0x705/0x870 net/socket.c:2379 ___sys_sendmsg+0x100/0x170 net/socket.c:2433 __sys_sendmsg+0xe9/0x1c0 net/socket.c:2462 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Change the condition to WARN_ON_ONCE(err && err != -ENOMEM) so that warnings are only emitted for unexpected errors. This aligns with the common kernel practice of not warning on -ENOMEM. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: ASoC: xilinx: formatter_pcm: pass aud_drv_data to irq handlers The irq handlers take a struct device pointer and call dev_get_drvdata() to obtain the driver data. However, the driver data is only set at the end of probe, after devm_request_irq(), so an interrupt taken in between causes the handlers to pass a NULL pointer to readl() and crash. Pass the private data directly as the devm_request_irq() argument instead of the device pointer, matching what the handlers expect.
In the Linux kernel, the following vulnerability has been resolved: af_packet: Don't send zero-byte data in tpacket_snd(). syzbot reported a WARNING in __dev_queue_xmit() triggered via tpacket_snd(): skb_assert_len WARNING: at include/linux/skbuff.h:2753 skb_assert_len WARNING: at __dev_queue_xmit+0x21bc/0x4970 net/core/dev.c:4781 Call Trace: <TASK> dev_queue_xmit include/linux/netdevice.h:3448 [inline] packet_xmit+0x243/0x310 net/packet/af_packet.c:276 tpacket_snd net/packet/af_packet.c:2907 [inline] packet_sendmsg+0x28d6/0x4eb0 net/packet/af_packet.c:3134 When sending 0-byte packets via TPACKET ring buffer on devices with no hard header (e.g. dev->hard_header_len == 0), tpacket_fill_skb() populates an skb with skb->len == 0 and returns 0. tpacket_snd() then forwards this empty skb to packet_xmit(), causing __dev_queue_xmit() to hit skb_assert_len(skb). Similar checks exist in packet_snd() via commit dc633700f00f ("net/af_packet: check len when min_header_len equals to 0") and in packet_sendmsg_spkt() via commit 6a341729fb31 ("af_packet: Don't send zero-byte data in packet_sendmsg_spkt()."). Return -EINVAL in tpacket_fill_skb() when skb->len is zero to reject zero-length packets in tpacket_snd().
In the Linux kernel, the following vulnerability has been resolved: drm/log: Fix infinite loop when scale is too large for display When scale is large enough that scaled_font exceeds the display dimensions, rows or columns become 0. A columns value of 0 causes an infinite loop in drm_log_draw_kmsg_record() because the loop never decrements len. Check for zero rows/columns in drm_log_setup_modeset() and return an error, cleaning up the already allocated buffer to avoid a leak.
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, Check if flow is PEER before acquiring devcom lock In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring ESW devcom lock without condition. In addition, in case of peer_flow, __mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock. This results in an AA deadlock. To fix this, introduce a new PEER flag that is set on flows created as peer flows (the duplicate flows on peer devices), and check it in mlx5e_tc_del_flow() before acquiring ESW devcom lock. Lockdep splat: ============================================ WARNING: possible recursive locking detected ============================================ Possible unsafe locking scenario: CPU0 ---- lock(&comp->lock_key#2); lock(&comp->lock_key#2); *** DEADLOCK *** Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_deadlock_bug.cold+0xbd/0xca __lock_acquire+0x1671/0x2ec0 lock_acquire+0x10e/0x2e0 down_read+0x95/0x430 mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core] mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core] mlx5e_flow_put+0x99/0x100 [mlx5_core] __mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core] mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core] mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core] mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core] tc_setup_cb_add+0x1dc/0x470 fl_change+0x2f4d/0x626d [cls_flower] tc_new_tfilter+0x79b/0x2310 rtnetlink_rcv_msg+0x778/0xad0 do_syscall_64+0x70/0x960 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK>
In the Linux kernel, the following vulnerability has been resolved: net: remove WARN_ON_ONCE() from sk_mc_loop() sk_mc_loop() can be called for sockets that are neither AF_INET nor AF_INET6 (e.g. AF_PACKET sockets when sending packets via raw/packet socket over virtual devices such as VRF or ipvlan). In such cases, sk_family is not AF_INET/AF_INET6 and sk_mc_loop() falls through the switch statement and triggers WARN_ON_ONCE(1). Non-INET sockets do not support IP_MULTICAST_LOOP or IPV6_MULTICAST_LOOP options, so loopback should default to true without generating a warning.
In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix crash passing ERR_PTR to kthread_stop() In test_ringbuffer()'s out_free cleanup loop, the check `!rb_threads[cpu]` only catches NULL entries and misses entries that hold an ERR_PTR. rb_threads[] is static, so unassigned slots are NULL. But when kthread_run_on_cpu() fails for a cpu, it stores ERR_PTR(-ENOMEM) (or -EINTR) in rb_threads[cpu] before the creation loop jumps to out_free. That entry is non-NULL, so the old `!ptr` check does not break, and the cleanup proceeds to call kthread_stop() on the ERR_PTR. kthread_stop() then dereferences the bogus pointer, crashing the kernel during the late_initcall self-test. crash logs: BUG: kernel NULL pointer dereference, address: 000000000000001c Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 7.2.0-rc6-dirty #7 PREEMPT(lazy) RIP: 0010:kthread_stop+0x2e/0x220 RBX: fffffffffffffff4 CR2: 000000000000001c Call Trace: <TASK> test_ringbuffer+0x1ec/0x650 do_one_initcall+0x6c/0x2c0 kernel_init_freeable+0x21d/0x420 kernel_init+0x15/0x1c0 ret_from_fork+0x21b/0x320 </TASK> Kernel panic - not syncing: Fatal exception
In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: initialise workingset state before folio split xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but __folio_split() leaves the xa_state's xa_lru unset. That lets a live, memcg-charged xa_node exist without being linked into the mapping's shadow_nodes list_lru; when reclaim later walks the list_lru it trips VM_WARN_ON(!css_is_dying()). Use mapping_set_update() to install both the workingset update callback and the shadow_nodes list_lru on the xa_state.
In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amdgpu: fix aperture mapping leak" devres teardown is LIFO. The aperture devres node was registered after the DRM device node, so devres_release_all() unmaps the aperture before the DRM device release callback fires amdgpu_device_fini_sw(). IP sw_fini callbacks (e.g. vcn_v4_0_sw_fini) write to fw_shared through a pointer derived from aper_base_kaddr, causing a kernel page fault on probe failure / rollback: BUG: unable to handle page fault ... PMD 0 RIP: vcn_v4_0_sw_fini+0x7b/0x170 [amdgpu] Call Trace: amdgpu_device_fini_sw amdgpu_driver_release_kms devm_drm_dev_init_release devres_release_all This reverts commit d871e99879cb5fd1fa798b006b4888887e63a17a. (cherry picked from commit 336e0cd576817ac64a4b394ca2b3680029f3e37f)
In the Linux kernel, the following vulnerability has been resolved: x86/mce: Set up the polling timer before CMCI discovery I hit the following on one of my machines: mce: CPU0 BANK15 CMCI inherited storm ------------[ cut here ]------------ ODEBUG: assert_init not available (active state 0) object: (____ptrval____) object type: timer_list hint: 0x0 WARNING: lib/debugobjects.c:632 at debug_object_assert_init+0x178/0x230, CPU#0: swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc5 #3 PREEMPTLAZY RIP: 0010:debug_object_assert_init+0x18f/0x230 Call Trace: <TASK> __mod_timer mce_timer_kick cmci_discover intel_init_cmci mce_intel_feature_init mcheck_cpu_init identify_cpu identify_boot_cpu arch_cpu_finalize_init start_kernel A second splat follows right after, from timer_setup() finding that same timer already queued: ODEBUG: init active (active state 0) object: (____ptrval____) object type: timer_list hint: stub_timer+0x0/0x10 This is happening because CMCI storm detection is trying to modify the timer before latter was properly set up. Set up the timer first. __mcheck_cpu_setup_timer() only calls timer_setup(), and depends on neither the generic nor the vendor init. [ bp: Massage commit message. ]
In the Linux kernel, the following vulnerability has been resolved: mm: mglru: fix stale batch updates after memcg reparenting The mglru page table walker batches per-generation size deltas in walk->nr_pages while walking page tables without holding the lruvec lock. The reset_batch_size() later folds those deltas into walk->lruvec under the lruvec lock. The page table walker can run concurrently with the memcg reparenting path as follows: CPU0 CPU1 ==== ==== walk_mm --> walk_page_range --> update_batch_size --> walk->nr_pages += delta mem_cgroup_css_offline --> memcg_reparent_objcgs --> lock lruvec lru_gen_reparent_memcg --> reparent child folios to parent unlock lruvec lock lruvec reset_batch_size --> child lrugen->nr_pages += delta This will trigger the following warning in lru_gen_exit_memcg(): VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0, sizeof(lruvec->lrugen.nr_pages))); And the user-visible impact of underestimated nr_pages in MGLRU was premature OOMs because MGLRU does not try to reclaim memory when nr_pages reaches zero, but there are still more pages. To fix it, make reset_batch_size() check CSS_DYING under RCU before flushing the pending batch. A non-dying memcg keeps the original lruvec stable against RCU-delayed offlining; a dying memcg redirects the deltas to the first non-dying ancestor.
In the Linux kernel, the following vulnerability has been resolved: igc: remove napi_synchronize() in igc_down() When an AF_XDP zero-copy application is killed abruptly, the XSK pool is torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the full budget on every poll, so napi_complete_done() never clears NAPI_STATE_SCHED. igc_down() calls napi_synchronize() before napi_disable(), so it spins forever waiting for that bit and the interface never goes down. Drop the napi_synchronize() and let napi_disable() do the job -- it sets NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after polling has stopped, matching the recent igb fix b1e067240379.
In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: handle missing status supplier MAX17040 does not report charger state itself, so the driver forwards POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is registered, power_supply_get_property_from_supplier() returns -ENODEV and leaves the output value untouched. max17040_get_property() currently ignores that error and returns success, so userspace can read an uninitialized status value from the battery power supply. This happens on systems that use the fuel gauge without a charger supplier relationship in firmware. Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and propagate other supplier lookup errors.
In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey() The helper function _ip_cprb_helper() uses internal buffer memory for building and processing CPRBs. After use this buffer was never scrubbed which could lead to leaving for example clear key material in memory which could be exposed via tricky reuse of this same memory. Extend the _ip_cprb_helper() function with another parameter 'scrub' used to steer scrubbing of this buffer. So now the caller has the opportunity to decide if scrubbing is needed or not. Extend the clear key to secure key token import process in function cca_clr2cipherkey() to tell the helper function from above to scrub the cprb buffer when the clear key value is part of the request data. Add explicit scrubbing on return from function cca_clr2cipherkey() for the random EXOR buffer and the cprb buffer. Overall this cleans the internal used buffer in case of clear key import to prevent sensitive data to get exposed.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check if dml21_add_phantom_plane() is successful Verify that the phantom plane was allocated to avoid a later segfault. (cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f)
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: use proper context for logging The same as the rest of the code, get_ss_info_from_atombios() uses calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is initialized only later in calc_pll_max_vco_construct(). Therefore, any output using DC_LOG_SYNC() leads to a NULL pointer deference in get_ss_info_from_atombios(). According to Sashiko, the very same problem exists in dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too. To avoid accessing the NULL context, use clk_src->base.ctx->logger everywhere. That context in base is initialized earlier in dce110_clk_src_construct() and dce112_clk_src_construct(). Before get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions above are actually called. This is done by redefining DC_LOGGER to CTX->logger. Before: dce110_clk_src_construct() did: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM -> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx After: dce110_clk_src_construct() does: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses clk_src->base.ctx (cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0)
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix missing authorization check in KFD_IOC_DBG_TRAP_DISABLE Prevent unauthorized termination of active GPU debug sessions. Previously, users with /dev/kfd access could terminate another process's debug session without proper ownership or ptrace authorization. (cherry picked from commit 4db4c5ffd5585b72622ecf6ffedf2da258ee23f5)
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: enforce cursor size limits for MOB cursors vmw_cursor_plane_atomic_check() bounds cursor width and height only on the legacy update path; the SVGA_CAP2_CURSOR_MOB path -- the default on modern hosts -- accepts any size. When the requested size exceeds SVGA_REG_CURSOR_MAX_DIMENSION or SVGA_REG_MOB_MAX_SIZE, vmw_cursor_mob_get() returns -EINVAL and leaves vps->cursor.mob NULL. Its return value is then discarded in vmw_cursor_plane_prepare_fb(), so the subsequent vmw_cursor_update_mob() calls vmw_bo_map_and_cache(NULL) and oopses inside vmw_bo_map_and_cache_size() on the tbo.base.size load. Reachable from any DRM master via DRM_IOCTL_MODE_CURSOR2 with a sufficiently large width or height (e.g. cursor_max_dim + 1). Reject oversized cursors in atomic_check for both MOB-backed cursor update types. The MOB byte-size limit only applies to the SVGA_CAP2_CURSOR_MOB path (vmw_cursor_mob_size() returns 0 for GB_ONLY); compute the required MOB size in 64-bit to avoid overflow when very large dimensions are requested. In prepare_fb only call vmw_cursor_mob_get()/_map() for VMW_CURSOR_UPDATE_MOB -- the GB_ONLY path uses bo->map.virtual directly and would otherwise be silently downgraded to NONE on hosts without SVGA_CAP2_CURSOR_MOB (where vmw_cursor_mob_get() always returns -EINVAL). Degrade the update to NONE if vmw_cursor_mob_get() or vmw_cursor_mob_map() fails so the update path does not run with a NULL backing MOB.
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Avoid double-deactivate of IRQs in the nested context In the nested state, the physical interrupt has already been deactivated through the HW bit in the LR. The extra deactivation would be harmless but can hit an errata case on AmpereOne, so avoid it here. On AmpereOne, deactivating a physical interrupt through ICC_DIR_EL1 or ICC_EOIR1_EL1 (depending on EOImode) which is not active, but is the highest priority pending interrupt causes the cpu to lose the interrupt pending state and also prevents the delivery of future interrupts.
In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix double free of wq, engine, and group structs The release callbacks for wq, engine, and group devices (idxd_conf_wq_release, idxd_conf_engine_release, idxd_conf_group_release) each call kfree() on the enclosing struct. The setup error paths and cleanup functions also call kfree() explicitly after put_device(), producing a double free whenever put_device() drops the reference count to zero and fires the release. In the setup functions, device_initialize() is called before device_add(), so the reference count is exactly 1 at the error sites. put_device() unconditionally fires the release, which frees the struct; the subsequent explicit kfree() then operates on freed memory. For idxd_setup_wqs(), the wq release callback also owns opcap_bmap and wqcfg. The error unwind additionally freed those fields explicitly before calling put_device(), causing further double frees on both. Remove the redundant explicit kfree() calls from all setup error paths and cleanup functions for wq, engine, and group structs, delegating sole ownership of those allocations to the release callbacks.
In the Linux kernel, the following vulnerability has been resolved: erofs: ensure valid f_path for page cache sharing Previously, backing files for page cache sharing were set up with f_path left as NULL (only f_inode was valid). It worked, but a recent mincore fix relies on f_path.mnt and crashes (found by "erofs/028" on 7.2-rc4): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 675528 Comm: fincore Not tainted 7.2.0-rc4-00002-g[]-dirty #1 PREEMPT(lazy) Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014 RIP: 0010:__do_sys_mincore+0xc0/0x2c0 ... Specify valid paths using valid disconnected dentries together with erofs_ishare_mnt instead of leaving f_path empty, so they are more like real backing files in a pseudo filesystem and standard backing_file_open() can be used directly.
In the Linux kernel, the following vulnerability has been resolved: hwmon: (sht3x) Fix unaligned accesses Sashiko reports: In sht3x_update_client(), the 16-bit temperature and humidity values are extracted from a stack-allocated byte array using be16_to_cpup(). The pointers passed to this function are calculated as buf and buf + 3. Since the difference between the two pointers is an odd number of bytes, at least one of them is guaranteed to be at an unaligned offset. This will trigger an alignment fault on strict-alignment architectures such as ARMv5 or SPARC, resulting in a kernel panic. Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(), and put_unaligned_be16() instead of cpu_to_be16().
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Initialize hba->rpmbs list in ufshcd Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL pointer dereference in the device teardown path if ufs_rpmb_probe() fails.
In the Linux kernel, the following vulnerability has been resolved: tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map(). If these functions are invoked while mmio_trace_array is NULL (e.g. before initialization or after disabled), accessing tr->array_buffer.buffer will result in a NULL pointer dereference crash. Fix this by adding an explicit NULL check for tr at the beginning of __trace_mmiotrace_rw() and __trace_mmiotrace_map().
In the Linux kernel, the following vulnerability has been resolved: riscv: drop __init from vec_check_unaligned_access_speed_all_cpus This function runs within a kthread and need not necessarily finish before system finishes boot and free_initmem() unmaps the .init.text section. This function makes calls to SBI for probing unaligned access speed, and if this is slow for some reason (say some debug prints were added to SBI), the kthread can still be running at this point and result in an instruction page fault when trying to fetch from the freed region. [ 25.642087] Unable to handle kernel paging request at virtual address ffffffff80a04ef8 [ 25.646694] Current vec_check_unali pgtable: 4K pagesize, 48-bit VAs, pgdp=0x00004000316e9000 [ 25.653170] [ffffffff80a04ef8] pgd=000010004be7e401, p4d=000010004be7e401, pud=000010004be7e001, pmd=000010000c3000e3 [ 25.661244] Oops [#1] [ 25.662997] Modules linked in: [ 25.665357] CPU: 3 UID: 0 PID: 42 Comm: vec_check_unali Not tainted 7.0.0-tt-blackhole-asrinivasan-00007-g30ff73f18211 #570 PREEMPTLAZY [ 25.674669] Hardware name: Tenstorrent Blackhole (DT) [ 25.678545] epc : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.683458] ra : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.688372] epc : ffffffff80a04ef8 ra : ffffffff80a04ef8 sp : ffff8f8000203e20 [ 25.693874] gp : ffffffff814dc168 tp : ffffaf8001ad9900 t0 : 0000000000000000 [ 25.699401] t1 : fffffffffffffff0 t2 : ffffaf8001ad9a10 s0 : ffff8f8000203e30 [ 25.704912] s1 : ffffaf80018dc780 a0 : 0000000000000000 a1 : 0000000000000002 [ 25.710407] a2 : 00000000000001f0 a3 : 0000000000000018 a4 : 0000000000000000 [ 25.715917] a5 : 0000000000000000 a6 : ffffaf8001c03d98 a7 : ffffaf8001c03e30 [ 25.721419] s2 : ffff8f8000023c98 s3 : ffffaf8001aa1240 s4 : ffffffff80a04ee0 [ 25.726937] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 [ 25.732450] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 [ 25.737944] s11: 0000000000000000 t3 : 0000000000000002 t4 : 0000000000000402 [ 25.743481] t5 : 0000000000000040 t6 : 0000000000000004 ssp : 0000000000000000 [ 25.749024] status: 0000000200000120 badaddr: ffffffff80a04ef8 cause: 000000000000000c [ 25.755060] [<ffffffff80a04ef8>] vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.760964] [<ffffffff80047a10>] kthread+0xd8/0xfc [ 25.764660] [<ffffffff80010c48>] ret_from_fork_kernel+0x18/0x1c4 [ 25.769220] [<ffffffff80895fe6>] ret_from_fork_kernel_asm+0x16/0x18 [ 25.774018] Code: cccc cccc cccc cccc cccc cccc cccc cccc cccc cccc (cccc) cccc Drop __init from its signature so that this doesn't happen.
In the Linux kernel, the following vulnerability has been resolved: iommufd/viommu: Release the igroup lock on the vdevice_size error path iommufd_vdevice_alloc_ioctl() takes idev->igroup->lock, then validates the driver's vdevice_size against the core structure size with a WARN_ON_ONCE. On failure that guard jumps to out_put_idev, below out_unlock_igroup, so it skips the mutex_unlock(), leaving the igroup lock held and deadlocking the next vDEVICE operation on that group. Jump to out_unlock_igroup instead.
In the Linux kernel, the following vulnerability has been resolved: mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE pte_pfn() and pte_dirty() have undefined behaviour when called on a non-present PTE. In migrate_vma_collect_pmd(), these functions may be invoked on non-present entries (e.g., device-private entries), leading to potential crashes from pte_pfn() or incorrect dirty folio accounting from pte_dirty(). Fix both by guarding with pte_present() checks.
In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential NULL pointer dereference dasd_release_space() checks the implementation of the is_ese() discipline function before calling it to determine if a given device is an ESE DASD. The current usage of the logical AND operator will lead to a NULL pointer dereference as the function is called even if the function pointer is NULL. Fix this by using the logical OR operator.
In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]
In the Linux kernel, the following vulnerability has been resolved: bpf: Disable xfrm_decode_session hook attachment BPF LSM programs can currently attach to xfrm_decode_session(). That hook may return an error, but security_skb_classify_flow() calls it from a void path and triggers BUG_ON() if an error is returned. Disable BPF attachment to the hook to prevent a BPF LSM program from turning packet classification into a full panic.
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, MPESW, Fix missing complete() on devcom error mlx5_mpesw_work() returned without calling complete() when mlx5_lag_get_devcom_comp() returned NULL. A caller that queued the work and waited on mpesww->comp would block indefinitely. Funnel the early-return path through a new "complete" label so the waiter is always woken.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: sco: Fix a race condition in sco_sock_timeout() sco_sock_timeout() runs asynchronously and lock_sock(sk). If the socket is closing while the timer is running, it holds the same lock (lock_sock(sk)) twice, leading to a deadlock. CPU 0 CPU 1 ==================== ====================== sco_sock_close() sco_sock_timeout() lock_sock(sk) // <-- LOCK __sco_sock_close() sco_chan_del() sco_conn_put() sco_conn_free() disable_delayed_work_sync() lock(sk) // <-- SAME LOCK Fix this by moving disable_delayed_work_sync() outside of lock_sock(sk), ensuring that no lock_sock(sk) is held before sco_sock_timeout(). Lockdep splat: WARNING: possible circular locking dependency detected 6.13.0-rc4 #7 Not tainted syz-executor292/9514 is trying to acquire lock: ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_lock_acquire sect/v6.13-rc4/./include/linux/rcupdate.h:337 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_read_lock sect/v6.13-rc4/./include/linux/rcupdate.h:849 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4137 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: __flush_work+0xd1/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195 but task is already holding lock: ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline] ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_close+0x25/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:524 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}: lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849 lock_sock_nested+0x48/0x130 sect/v6.13-rc4/net/core/sock.c:3622 lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline] sco_sock_timeout+0xbe/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:158 process_one_work sect/v6.13-rc4/kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa99/0x18f0 sect/v6.13-rc4/kernel/workqueue.c:3310 worker_thread+0x8a9/0xd80 sect/v6.13-rc4/kernel/workqueue.c:3391 kthread+0x2c6/0x360 sect/v6.13-rc4/kernel/kthread.c:389 ret_from_fork+0x4e/0x80 sect/v6.13-rc4/arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 sect/v6.13-rc4/arch/x86/entry/entry_64.S:244 -> #0 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}: check_prev_add sect/v6.13-rc4/kernel/locking/lockdep.c:3161 [inline] check_prevs_add sect/v6.13-rc4/kernel/locking/lockdep.c:3280 [inline] validate_chain+0x1888/0x5760 sect/v6.13-rc4/kernel/locking/lockdep.c:3904 __lock_acquire+0x13b4/0x2120 sect/v6.13-rc4/kernel/locking/lockdep.c:5226 lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849 touch_work_lockdep_map sect/v6.13-rc4/kernel/workqueue.c:3909 [inline] start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4163 [inline] __flush_work+0x70f/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195 __cancel_work_sync sect/v6.13-rc4/kernel/workqueue.c:4351 [inline] disable_delayed_work_sync+0xbb/0xf0 sect/v6.13-rc4/kernel/workqueue.c:4514 sco_conn_free sect/v6.13-rc4/net/bluetooth/sco.c:95 [inline] kref_put sect/v6.13-rc4/./include/linux/kref.h:65 [inline] sco_conn_put+0x18f/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:107 sco_chan_del+0xe2/0x210 sect/v6.13-rc4/net/bluetooth/sco.c:236 sco_sock_close+0x8f/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:526 sco_sock_release+0x62/0x2d0 sect/v6.13-rc4/net/blueto ---truncated---
In the Linux kernel, the following vulnerability has been resolved: hwmon: (occ) unregister sysfs devices outside occ lock occ_active(false) and occ_shutdown() unregister sysfs-backed devices while occ->lock is held. hwmon_device_unregister() and sysfs_remove_group() can wait for active sysfs callbacks to drain, and those callbacks can enter the OCC update path and try to take occ->lock again. That gives the unregister paths the lock ordering occ->lock -> sysfs callback drain, while a callback has the opposite edge sysfs callback -> occ->lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the real unregister and callback carrier: occ_shutdown() hwmon_device_unregister() occ_show_temp_1() occ_update_response() Lockdep reported the circular dependency with occ_shutdown() already holding the OCC mutex and hwmon_device_unregister() waiting on the sysfs side: WARNING: possible circular locking dependency detected ... (sysfs_lock) ... at: hwmon_device_unregister+0x12/0x30 [vuln_msv] ... (&test_occ.lock) ... at: occ_shutdown.constprop.0+0xe/0x40 [vuln_msv] occ_update_response.isra.0+0xb/0x20 [vuln_msv] occ_show_temp_1.constprop.0.isra.0+0x23/0x40 [vuln_msv] *** DEADLOCK *** Serialize hwmon registration and removal with a separate hwmon_lock. Under that lock, detach occ->hwmon and update occ->active while occ->lock is held so concurrent OCC state changes still see a stable state, then drop occ->lock before calling hwmon_device_unregister(). Remove the driver sysfs group before taking occ->lock in occ_shutdown(), so draining the driver attributes cannot wait while the OCC mutex is held. Also make OCC update callbacks return -ENODEV after deactivation, so callbacks that already passed sysfs active protection do not poll the hardware after teardown has detached the hwmon device.
In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: defer reset until cmd_mutex is unlocked vub300_cmndwork_thread() holds cmd_mutex while it sends a command and waits for the command response. If the response wait times out, __vub300_command_response() kills the command URBs and then synchronously resets the USB device through usb_reset_device(). That reset path re-enters the driver through vub300_pre_reset(), which also takes cmd_mutex. The worker therefore tries to acquire the same mutex recursively while it is still holding it from the command path. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the real worker and timeout/reset carrier: vub300_cmndwork_thread() __vub300_command_response() usb_lock_device_for_reset() usb_reset_device() vub300_pre_reset() Lockdep reported the same-task recursive acquisition on cmd_mutex: WARNING: possible recursive locking detected ... (&test_vub300.cmd_mutex) ... at: usb_reset_device... [vuln_msv] ... (&test_vub300.cmd_mutex) ... at: vub300_cmndwork_thread+0x12/0x20 [vuln_msv] Workqueue: vub300_cmd_wq vub300_cmndwork_thread [vuln_msv] *** DEADLOCK *** Return a flag from __vub300_command_response() when the timeout path needs a device reset, then perform the reset after vub300_cmndwork_thread() has cleared the in-flight command state and dropped cmd_mutex. The reset is still attempted before mmc_request_done(), preserving the existing request completion ordering while avoiding the recursive lock.
In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Fix null-ptr-deref in dw_dp_remove() Attempting to access driver data in the platform driver ->remove() callback may lead to a null pointer dereference since there is no guaranty that the component ->bind() callback invoking platform_set_drvdata() was executed. A common scenario is when Rockchip DRM driver didn't manage to run component_bind_all() because of an (unrelated) error causing early return from rockchip_drm_bind(). Drop the unnecessary call to platform_get_drvdata() and, instead, reference the target device structure via platform_device.
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer The management mailbox channel cleanup helpers can be called from error handling paths when mgmt_chann has already been destroyed. Add NULL checks to xdna_mailbox_free_channel() and xdna_mailbox_stop_channel() so the cleanup path safely returns instead of dereferencing a NULL mailbox channel pointer.
In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Fix race condition in event registration The zynqmp_power driver registers handlers for suspend and subsystem restart events using register_event(). However, the work structures (zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by these handlers were allocated and initialized after the registration call. This created a race window where, if the firmware triggered an event immediately after registration but before allocation, the callback (suspend_event_callback or subsystem_restart_event_callback) would dereference a NULL pointer in work_pending(), leading to a crash. Fix this by allocating and initializing the work structures before registering the events.
In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Shutdown and free rx mailbox channel A mbox rx channel is requested using mbox_request_channel_byname() in probe. In remove callback, the rx mailbox channel is cleaned up when the rx_chan is NULL due to incorrect condition check. The mailbox channel is not shutdown and it can receive messages even after the device removal. This leads to use after free. Also the channel resources are not freed. Fix this by checking the rx_chan correctly.
In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Treat zero-length cert chain as query for blob lengths When handling a PDH export, treat a zero-length userspace cert chain buffer as a request to query the length of the relevant blobs. Failure to account for the zero-length buffer trips a BUG_ON() when running with CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation). kernel BUG at arch/x86/mm/physaddr.c:28 ! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded Tainted: G W 6.18.16-smp-DEV #1 NONE Tainted: [W]=WARN Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 RIP: 0010:__phys_addr+0x16a/0x180 arch/x86/mm/physaddr.c:28 RSP: 0018:ffffc9008329fc80 EFLAGS: 00010293 RAX: ffffffff8179110a RBX: 0000778000000010 RCX: ffff8884e6992600 RDX: 0000000000000000 RSI: 0000000080000010 RDI: 0000778000000010 RBP: ffffc9008329fdf0 R08: 0000000000000dc0 R09: 00000000ffffffff R10: dffffc0000000000 R11: fffffbfff126d297 R12: dffffc0000000000 R13: 1ffff92010653fc8 R14: 0000000080000010 R15: dffffc0000000000 FS: 0000555556bec9c0(0000) GS:ffff88aa4ce1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd3159e7000 CR3: 00000004fbc44000 CR4: 0000000000350ef0 Call Trace: <TASK> [<ffffffff853d3869>] sev_ioctl_do_pdh_export+0x559/0x7a0 drivers/crypto/ccp/sev-dev.c:2308 [<ffffffff853d1fdd>] sev_ioctl+0x2cd/0x480 drivers/crypto/ccp/sev-dev.c:2556 [<ffffffff82549ebc>] vfs_ioctl fs/ioctl.c:52 [inline] [<ffffffff82549ebc>] __do_sys_ioctl fs/ioctl.c:598 [inline] [<ffffffff82549ebc>] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584 [<ffffffff8630115f>] do_syscall_x64 arch/x86/entry/syscall_64.c:64 [inline] [<ffffffff8630115f>] do_syscall_64+0x9f/0xf40 arch/x86/entry/syscall_64.c:98 [<ffffffff81000136>] entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fd3158eac39 </TASK> Thankfully, the bug is benign outside of CONFIG_DEBUG_VIRTUAL=y as getting the physical address is just arithmetic, and the PSP errors out before trying to write to the garbage address (which it must, otherwise querying the blob lengths would clobber memory at pfn=0).
In the Linux kernel, the following vulnerability has been resolved: crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL dsm_create() initially checks pdev->bus when computing segment_id: u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0; But the next two lines unconditionally dereference pdev->bus via pcie_find_root_port() and especially pci_dev_id(pdev), which expands to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact NULL, segment_id is initialised to 0 but the very next statement crashes the kernel. smatch flags this: drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we previously assumed 'pdev->bus' could be null (see line 251) Make the NULL handling consistent: if pdev->bus is NULL the device has no PCI context to work with and SEV TIO setup cannot proceed, so return -ENODEV before any of the bus-dependent lookups. The remaining initialisation now runs only on the path where pdev->bus is known to be valid. No change for callers where pdev->bus is non-NULL, which is the only case where dsm_create() did meaningful work before this change.
In the Linux kernel, the following vulnerability has been resolved: media: atomisp: gc2235: fix UAF and memory leak gc2235_probe() handles its error paths incorrectly. If media_entity_pads_init() fails, gc2235_remove() is called, which tears down the subdev and frees dev, but then still falls through to atomisp_register_i2c_module(). This results in use-after-free. If atomisp_register_i2c_module() fails, the media entity and control handler are left initialized and dev is leaked. gc2235_remove() unconditionally calls media_entity_cleanup() and v4l2_ctrl_handler_free(), but these are not initialized at every error path in gc2235_probe(). Replace gc2235_remove() calls in the probe error paths with explicit unwind labels that free only the resources initialized at each point of failure, in reverse order of initialization.
In the Linux kernel, the following vulnerability has been resolved: pinctrl: spacemit: fix NULL check in spacemit_pin_set_config spacemit_pin_set_config() looks up the per-pin descriptor with spacemit_get_pin() then checks the wrong variable for failure: const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin); ... if (!pin) return -EINVAL; reg = spacemit_pin_to_reg(pctrl, spin->pin); pin is an unsigned int pin id, where 0 (GPIO_0 / gmac0_rxdv on K3) is a valid pin, so rejecting it here drops the PAD config write for the first pin of every group. On K3 Pico-ITX the GMAC RGMII group lists pin 0 as its first entry, so its drive-strength / bias configuration was silently ignored. The intended guard is against spacemit_get_pin() returning NULL when the pin id isn't in the SoC's pin table. Check spin instead, which both restores PAD setup for pin 0 and prevents a NULL deref on spin->pin.
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix warning in poll cq direct mode CQs allocated by ib_alloc_cq() always have a comp_handler. Though in direct mode this handler is never expected to be called, it is still called when the driver is reset, triggering the following WARN_ONCE(): Call trace: ib_cq_completion_direct+0x38/0x60 hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2] hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2] hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2] hclge_notify_roce_client+0x60/0xbc [hclge] hclge_reset_rebuild+0x48/0x34c [hclge] hclge_reset_subtask+0xcc/0xec [hclge] hclge_reset_service_task+0x80/0x160 [hclge] hclge_service_task+0x50/0x80 (hclge] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18
In the Linux kernel, the following vulnerability has been resolved: ocfs2: don't BUG_ON an invalid journal dinode [BUG] A fuzzed OCFS2 image can corrupt the current slot journal dinode while mount is still in progress. The mount path first reports the invalid journal block and then crashes in shutdown: kernel BUG at fs/ocfs2/journal.c:1034! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034 Call Trace: ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116 ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline] ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083 get_tree_bdev_flags+0x38b/0x640 fs/super.c:1698 get_tree_bdev+0x24/0x40 fs/super.c:1721 ocfs2_get_tree+0x21/0x30 fs/ocfs2/super.c:1184 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... [CAUSE] ocfs2_journal_toggle_dirty() used to return -EIO when journal->j_bh no longer contained a valid dinode, because the startup and shutdown paths already handled that failure. Commit 10995aa2451a ("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.") changed the check to a BUG_ON() under the assumption that the journal dinode had already been validated. That turns an unexpected invalid journal dinode during mount teardown into a kernel crash instead of a normal mount failure. [FIX] Replace the BUG_ON() with WARN_ON() and return -EIO. This keeps the invariant warning for debugging, but restores the original behavior of failing startup or shutdown cleanly instead of panicking the kernel.
In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Fix call trace due to missing release() When unloading the igen6_edac driver, there is a call trace: Device '(null)' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst. WARNING: drivers/base/core.c:2567 at device_release+0x84/0x90, CPU#5: rmmod/127209 ... RIP: 0010:device_release+0x84/0x90 Call Trace: <TASK> kobject_put+0x8c/0x220 put_device+0x17/0x30 igen6_unregister_mcis+0xa2/0xe0 [igen6_edac] igen6_remove+0x82/0xb0 [igen6_edac] ... Fix the call trace by providing empty release() functions for the memory controller devices.
In the Linux kernel, the following vulnerability has been resolved: liveupdate: Reference count incoming FLB data Increment the incoming FLB refcount in liveupdate_flb_get_incoming() so that the FLB structure cannot be freed while the caller is actively using it. Add an additional liveupdate_flb_put_incoming() function so the caller can explicitly indicate when it is done using the FLB data. During a Live Update, a subsystem might need to hold onto the incoming File-Lifecycle-Bound (FLB) data for an extended period, such as during device enumeration. Incrementing the reference count guarantees that the data remains valid and accessible until the subsystem releases it, preventing future use-after-free bugs.
In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: enable the right set of ciphers The firmware version number check for IGTK introduced in commit c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key") lets the amount of ciphers decrease on every boot of a too old firmware and that is practically happening. It also does not take into account other chips than the wl18xx. On some wl128x, the following can be observed when connecting via nm to a common ap: [ 484.113311] wlcore: WARNING could not set keys [ 484.117828] wlcore: ERROR Could not add or replace key [ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5) [ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142 [ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1 [ 484.145721] wlcore: down [ 484.148986] ieee80211 phy0: Hardware restart was requested [ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142) [ 484.633758] wlcore: Association completed. [ 484.690490] wlcore: ERROR command execute failure 14 [ 484.690490] ------------[ cut here ]------------ [ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892 This repeats endlessly. Always disable IGTK on wl12xx and fix the decrementing mess.
In the Linux kernel, the following vulnerability has been resolved: cxl/fwctl: Fix __fortify_panic Fix a runtime assertion in cxlctl_get_supported_features(). Fortify complains that it is potentially overflowing the entries array per __counted_by_le(num_entries). Quiet the false positive by initializing @num_entries earlier. memcpy: detected buffer overflow: 48 byte write of buffer size 0 WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#7: fwctl/1398 RIP: 0010:__fortify_report+0x50/0xa0 Call Trace: __fortify_panic+0xd/0xf cxlctl_get_supported_features.cold+0x23/0x35 [cxl_core]
In the Linux kernel, the following vulnerability has been resolved: cxl/test: Fix __fortify_panic Fix a runtime assertion in setup_xor_mapping(). Fortify complains that it is potentially overflowing the xormaps array per __counted_by(nr_maps). Quiet the false positive by initializing @nr_maps earlier. memcpy: detected buffer overflow: 32 byte write of buffer size 0 WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#8: modprobe/2728 Call Trace: __fortify_panic+0xd/0xf setup_xor_mapping+0x6c/0xa0 [cxl_translate] [ dj: Fixed up @nr_entries to @nr_maps in commit log. ]
In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: revert ct extension genid infrastructure This infrastructure is not used anymore after moving ct timeout and helper to use datapath refcount to track object use. Revert commit c56716c69ce1 ("netfilter: extensions: introduce extension genid count") this patch disables all ct extensions (leading to NULL) for unconfirmed conntracks, when this is only targeted at ct helper and ct timeout. There is also codebase that dereferences the ct extension without checking for NULL which could lead to crash.
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix NULL pointer dereference in mt7996_init_tx_queues() When MT76_NPU and CONFIG_NET_MEDIATEK_SOC_WED are enabled and mt76 detects properly the Airoha NPU SoC, mt7996_init_tx_queues() will dereference a NULL WED pointer. Fix the issue by always passing the WED pointer from mt7996_dma_init().
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: npc: Fix size of entry2cntr_map KASAN prints below splat. This is caused by allocating counter for reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map is not allocated for reserved entries. BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0 Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14 CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1 Hardware name: Marvell CN106XX board (DT) Workqueue: events work_for_cpu_fn Call trace: dump_backtrace.part.0+0xe4/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x88/0xb4 print_report+0x154/0x458 kasan_report+0xb8/0x194 __asan_store2+0x7c/0xa0 npc_map_mcam_entry_and_cntr+0xb0/0x1a0 rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280 npc_install_flow+0x840/0xfe0 rvu_npc_install_cpt_pass2_entry+0x138/0x190 rvu_nix_init+0x148c/0x2880 rvu_probe+0x1800/0x30b0 local_pci_probe+0x78/0xe0 work_for_cpu_fn+0x30/0x50 process_one_work+0x4cc/0x97c worker_thread+0x360/0x630 kthread+0x1a0/0x1b0 ret_from_fork+0x10/0x20
In the Linux kernel, the following vulnerability has been resolved: MIPS: mm: Fix out-of-bounds write in maar_res_walk() maar_res_walk() uses wi->num_cfg as the index into the fixed-size wi->cfg array, but checks whether the array is full only after it has filled the selected entry. If walk_system_ram_range() reports more than 16 memory ranges, the overflow call writes one struct maar_config past the end of the array before WARN_ON() prevents num_cfg from advancing. Move the full-array check before taking the array slot and return non-zero when the scratch array is full, so walk_system_ram_range() terminates the walk instead of invoking the callback for further ranges.
In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at the 'out:' label, but only calls the matching get_cpu_var() after the 'i < 0' early-return check. When event->hw.idx is negative the function jumps to 'out:' without having taken get_cpu_var(), and the trailing put_cpu_var() then issues an unmatched preempt_enable(), underflowing preempt_count. On a CONFIG_PREEMPT=y kernel preempt_count would underflow and eventually present as a 'scheduling while atomic' BUG. Move put_cpu_var() to pair with get_cpu_var() so the percpu access is correctly bracketed and the 'out:' label only handles perf_pmu_enable.
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix memory leak of bonding resources In a corner case of concurrent driver removal and driver reset, bonding resource is first released in hns_roce_hw_v2_exit() during driver removal, and then is allocated again in hns_roce_register_device() during driver reset. This leads to memory leak because the release timing has already passed. This may also lead to a kernel panic as below because of the leaked notifier callback: Call trace: 0xffffa20fccc04978 (P) raw_notifier_call_chain+0x20/0x38 call_netdevice_notifiers_info+0x60/0xb8 netdev_lower_state_changed+0x4c/0xb8 As Sashiko suggested, the teardown order of bonding resources should be inverted to make sure the resources are released when the driver is removed.
In the Linux kernel, the following vulnerability has been resolved: mfd: cs42l43: Sanity check firmware size Currently the code checks if a firmware was received, however it does not verify that the firmware size is larger than the firmware header. As the firmware pointer is dereferenced as a pointer to the header structure this could lead to an out of bounds memory access. Add the missing check.
In the Linux kernel, the following vulnerability has been resolved: coresight: ete: Always save state on power down System register ETMs and ETE are unlikely to be preserved on CPU power down. The ETE DT binding also never documented "arm,coresight-loses-context-with-cpu" so nobody would have legitimately been able to use that binding to fix it and ACPI has no such binding at all. Fix it by hard coding the setting for sysreg ETMs (ETE is always sysreg) or ACPI boots. Use a local variable when setting up save_state so that it's immune to concurrent probing when devices have different configurations which is an issue with modifying the global. This fixes the following error when using Coresight with ACPI on the FVP which supports CPU PM: coresight ete0: External agent took claim tag WARNING: drivers/hwtracing/coresight/coresight-core.c:248 at coresight_disclaim_device_unlocked+0xe0/0xe8, CPU#0: perf/117
In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability dwc_pcie_rasdes_debugfs_init() returns success when the controller has no RAS DES capability, leaving pci->debugfs->rasdes_info unset. The common debugfs teardown path still calls dwc_pcie_rasdes_debugfs_deinit(), which dereferences rasdes_info unconditionally. Return early when no RAS DES state was allocated. In that case no RAS DES mutex was initialized, so there is nothing to destroy. [mani: reworded subject]
In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/MSI: Unmap MSI-X region on error" This reverts commit 1a8d4c6ecb4c81261bcdf13556abd4a958eca202. Commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") added an iounmap(dev->msix_base) on the error path of msix_capability_init() to release the MSI-X region when msix_setup_interrupts() fails. When msix_setup_interrupts() fails, the call chain is: msix_setup_interrupts() -> __msix_setup_interrupts() struct pci_dev *dev __free(free_msi_irqs) = __dev; ... return ret; // __free cleanup fires on error The __free(free_msi_irqs) cleanup calls pci_free_msi_irqs(), which already handles the unmap: void pci_free_msi_irqs(struct pci_dev *dev) { pci_msi_teardown_msi_irqs(dev); if (dev->msix_base) { iounmap(dev->msix_base); // already unmapped here dev->msix_base = NULL; // and set to NULL } } So dev->msix_base is unmapped and set to NULL before msix_setup_interrupts() returns to msix_capability_init(). The "goto out_unmap" introduced by commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") then calls iounmap() a second time on a NULL pointer. This was reproduced on Intel Emerald Rapids (192 CPUs) while running tools/testing/selftests/kexec/test_kexec_jump.sh: WARNING: CPU#44 at iounmap+0x2a/0xe0 RIP: 0010:iounmap+0x2a/0xe0 RDI: 0000000000000000 Call Trace: msix_capability_init+0x317/0x3f0 __pci_enable_msix_range+0x21d/0x2c0 pci_alloc_irq_vectors_affinity+0xa9/0x130 nvme_setup_io_queues+0x2a8/0x420 [nvme] nvme_reset_work+0x151/0x340 [nvme] ... RDI=0 confirms iounmap() is called with NULL. Restore the original "goto out_disable" and leave the unmap to the existing __free(free_msi_irqs) cleanup.
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid double-unpin of DOORBELL/MMIO BOs on free amdgpu_amdkfd_gpuvm_free_memory_of_gpu() unpinned DOORBELL and MMIO remap BOs (which are pinned at allocation time) before checking whether the BO is still mapped to the GPU. When the BO is still mapped, the function returns -EBUSY and leaves the BO alive, but it has already been unpinned. The BO is then unpinned again when it is finally freed during process teardown, triggering a ttm_bo_unpin() underflow warning: WARNING: CPU: 18 PID: 15066 at ttm/ttm_bo.c:650 amdttm_bo_unpin+0x6d/0x80 [amdttm] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu] RIP: 0010:amdttm_bo_unpin+0x6d/0x80 [amdttm] Call Trace: amdgpu_bo_unpin+0x1a/0x90 [amdgpu] amdgpu_amdkfd_gpuvm_unpin_bo+0x31/0xb0 [amdgpu] amdgpu_amdkfd_gpuvm_free_memory_of_gpu+0x3bf/0x460 [amdgpu] kfd_process_free_outstanding_kfd_bos+0xd4/0x170 [amdgpu] kfd_process_wq_release+0x109/0x1b0 [amdgpu] process_one_work+0x1e2/0x3b0 worker_thread+0x50/0x3a0 kthread+0xdd/0x100 ret_from_fork+0x29/0x50 Move the unpin after the mapped_to_gpu_memory check so it only happens once we are committed to freeing the BO. (cherry picked from commit 927c5b2defb9b09856444d94bebfd056a002bd75)
In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event() magicmouse_raw_event() handles DOUBLE_REPORT_ID (0xf7) packets, which pack two touch reports into one, by splitting the packet and calling itself on each half. The only guard against runaway recursion is a "size < 1" check, which stops zero-sized calls but does not bound the recursion depth. A malicious HID device that matches this driver can send a report starting with DOUBLE_REPORT_ID and filled with the sequence [0xf7, 0x00]. Each level consumes two bytes and recurses on the remainder, so an incoming report of up to HID_MAX_BUFFER_SIZE (16 KiB) drives roughly 8000 nested calls. That easily exhausts the 16 KiB kernel stack, leading to a stack overflow: a panic with CONFIG_VMAP_STACK, or memory corruption without it. A double report only ever wraps two normal reports; it is never legitimately nested. Refuse to re-enter the DOUBLE_REPORT_ID case from a recursive call so the recursion depth is bounded to two, while all valid packets keep being parsed exactly as before.
In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: do not keep a stale msc->input if no input is claimed magicmouse_input_mapping() caches the first hid_input's input_dev in msc->input while the report descriptor is parsed, and the rest of the driver treats a non-NULL msc->input as proof that an input device was registered. That does not hold on the hid-input error path. If hidinput_connect() fails -- for instance because input_register_device() returns an error -- it unwinds through hidinput_disconnect(), which frees every input_dev it created, including the one cached in msc->input. The failure does not abort the probe. hid_connect() only skips the claim: if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev, connect_mask & HID_CONNECT_HIDINPUT_FORCE)) hdev->claimed |= HID_CLAIMED_INPUT; and the "device has no listeners" bailout below it does not fire for this driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad 2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore returns 0 and magicmouse_probe() continues with msc->input pointing at freed memory. Being non-NULL, it passes the "input not registered" check in probe and the NULL checks in ->raw_event and ->event, so the next input report dereferences freed memory. Clear msc->input when the HID core did not claim an input device, so the existing NULL checks cover this case as well.
In the Linux kernel, the following vulnerability has been resolved: HID: core: fix OOB read of field->usage in hid_set_field() hid_set_field() hands field->usage + offset to hid_dump_input() before the guard that bounds offset: hid_dump_input(field->report->device, field->usage + offset, value); if (offset >= field->report_count) { hid_err(...); return -1; } Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is allocated inline with the hid_field in hid_register_field() and holds field->maxusage entries, so an offset past it reads off the end of the kvzalloc()ed allocation and into a neighbouring object. Had the guard run first, offset < report_count <= maxusage would already have confined the pointer to the array. A caller supplies such an offset today. picolcd_fb_send_tile() validates only report->maxfield before issuing hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its offsets are fixed at 11..42 and are never checked against the bound field. When the device registers that field with fewer usages, the framebuffer deferred-io work drives the read on every tile. KASAN reports a 4-byte slab-out-of-bounds read in hid_dump_input() below hid_set_field(), and the same boot logs "offset (1) exceeds report_count (1)" from the guard that runs only afterwards. Move the hid_dump_input() call below the guard. Because field->maxusage >= field->report_count, the guard then establishes that field->usage + offset lies inside the array before it is dereferenced, for every caller and without changing behaviour on the valid path. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
In the Linux kernel, the following vulnerability has been resolved: HID: pidff: fix OOB write when hid->inputs is empty hid_pidff_init_with_quirks() derives its input_dev from list_entry(hid->inputs.next, struct hid_input, list) without first checking that hid->inputs is non-empty. The list member of struct hid_input is at offset 0, so on an empty list list_entry() yields &hid->inputs itself and the following hidinput->input load reads an unrelated member of struct hid_device. dev is then a type-confused pointer, and force-feedback init writes through it: each set_bit(FF_*, dev->ffbit) stores 8 bytes at dev + 192, past the end of the object dev actually aliases, and input_ff_create() adds further writes of a heap pointer and two function pointers. Until hid-universal-pidff the only caller was hid_pidff_init() from usbhid, which runs under HID_CLAIMED_INPUT and therefore always has at least one hid_input. universal_pidff_probe() starts the device with HID_CONNECT_DEFAULT & ~HID_CONNECT_FF and then calls hid_pidff_init_with_quirks() directly whenever the descriptor carries a PID usage page, bypassing that gate. A report descriptor whose only application collection is on HID_UP_PID leaves hid->inputs empty while hid_connect() still succeeds through the hidraw claim, so probe reaches the unguarded list_entry(). The write happens in the USB probe path, on the hotplug workqueue, so plugging in a malicious device is enough to trigger it; no attacker software and no logged-in user are required. KASAN reports an 8-byte out-of-bounds write in hid_pidff_init_with_quirks() reached from universal_pidff_probe(). Check for an empty list before deriving dev and return -ENODEV, as the other HID force-feedback drivers already do. universal_pidff_probe() propagates the error and unwinds. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
In the Linux kernel, the following vulnerability has been resolved: net/ionic: avoid OOB TX partner lookup for hwstamp RXQ The dedicated hardware timestamp RX queue is allocated with q->index equal to lif->ionic->nrxqs_per_lif. The normal txqcqs array only contains the regular queue pairs, so using that index to set rxq->partner can read one entry past txqcqs[] and then write through the derived pointer. Only link RX/TX partners for normal queue-pair indexes. Leave the hwstamp RX queue unpaired, and make the XDP_TX path abort cleanly if an RX queue has no TX partner.
In the Linux kernel, the following vulnerability has been resolved: futex/pi: Reject cross-mm private futex owners A private futex key borrows the waiter's mm without taking an mm_users reference. Nevertheless, attach_to_pi_owner() currently accepts an owner from a different address space and copies the private key into the owner's PI state. When that owner exits, exit_pi_state_list() uses the saved key to find the hash bucket and acquires a reference to the waiter's private hash. If the last user of the waiter's mm exits concurrently, futex_hash_free() frees the hash while the owner still uses its bucket and reference. Prevent this by validating in attach_to_pi_owner() that, for private futexes, the owner mm and waiter mm are the same. Perform the check with the owner's pi_lock held and after validating owner::futex::state to serialize against a concurrent PI-state exit cleanup. [ tglx: Amended comment ]
In the Linux kernel, the following vulnerability has been resolved: futex/pi: Plug private futex exec() race The check for private futexes whether the waiter's mm, which is stored in the futex_key and copied into the pi_state, is the same as the owner's mm is not sufficient for exec(). exec() has a gap where the mm check fails to give the correct answer: exec() ... exec_release_mm() futex_exec_release() tsk::futex::exit_state = EXITING; cleanup_robust_list(); 1) tsk::futex::exit_state = OK; ... old_mm = tsk::mm; 2) tsk::mm = ->mm; Between #1 and #2 the check for the mm is wrong as that mm is about to be swapped out and eventually freed. Plug this gap by: 1) Setting tsk::futex::exit_state to FUTEX_STATE_DEAD in futex_exec_release() 2) Setting tsk::futex::exit_state to FUTEX_STATE_OK after the mm has been switched. From a futex point of view the task is dead after it finished the robust list cleanup up to the point where it sets the state to OK again.
In the Linux kernel, the following vulnerability has been resolved: futex: Fix race in futex_pivot_pending() during private hash resize A task performing a custom private hash resize can remain blocked in uninterruptible sleep indefinitely. The hung-task detector reports: INFO: task futex-resizer:314 blocked for more than 10 seconds. task:futex-resizer state:D stack:14824 pid:314 tgid:312 ppid:311 Call Trace: __schedule+0x521/0xf30 schedule+0x22/0xa0 futex_hash_allocate+0x3db/0x490 __do_sys_prctl+0x6f5/0xbd0 do_syscall_64+0xf9/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: hung_task: blocked tasks futex_pivot_pending() allows the resize request to continue when either no replacement hash is pending (hash_new == NULL) or the current hash reference count has reached zero. After the final-reference wake, another futex task can complete the pivot between the two observations: T1 T2 futex_hash_allocate() wait_var_event(mm, ...) futex_pivot_pending(mm) hash_new != NULL futex_hash() futex_ref_get(old) -> false futex_pivot_hash(mm) hash_new = NULL __futex_pivot_hash(mm, new) rcu_assign_pointer(hash, new) fph = rcu_dereference(hash) /* new */ futex_ref_is_dead(fph) -> false schedule() The pivot changes the state from hash_new != NULL with a dead current hash to hash_new == NULL with a live current hash. Because futex_pivot_pending() reads hash_new and hash without serialization, the resize task can observe hash_new in the pre-pivot state and hash in the post-pivot state, causing futex_pivot_pending() to return false even though the pivot has completed. The task then goes to sleep after the wakeup has already been consumed. Serialize state reads in futex_pivot_pending() using futex_mm_phash::lock. This guarantees that futex_pivot_pending() observes hash_new and hash atomically, eliminating the race condition.
In the Linux kernel, the following vulnerability has been resolved: futex: Fix race on the initial mm->futex.phash.ref allocation futex_hash_allocate() allocates mm->futex.phash.ref without any locking. Commit d9b05321e21e ("futex: Move futex_hash_free() back to __mmput()") moved the allocation here and assumed that the process has just a single thread at this point. Commit ee9dce44362b ("futex: Drop CLONE_THREAD requirement for private default hash alloc") widened need_futex_hash_allocate_default() to cover any CLONE_VM clone, but left out vfork because the parent is suspended and cannot race. That no longer holds once vfork is nested. If a vfork child calls vfork again and is then killed with SIGKILL, the parent is released from its vfork wait and runs concurrently with the grandchild in the same mm. Neither of them went through futex_hash_allocate_default(). When both call prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_SET_SLOTS) at the same time, each one sees mm->futex.phash.ref as NULL and stores its own percpu counter. Only the last store survives. The counter stored first is no longer reachable from the mm, so the references on it are not seen by __futex_ref_atomic_end(). A private hash that still has references is then considered dead and freed, and a task that still holds one of its buckets writes into freed memory in futex_q_lock(). Store the counter once with cmpxchg() and let the loser free_percpu() its own. The initial reference has to be taken before the store, otherwise another task can install a private hash while the counter is still 0.
In the Linux kernel, the following vulnerability has been resolved: HID: asus: fix missing hid_is_usb() check to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue.
In the Linux kernel, the following vulnerability has been resolved: HID: huawei: fix missing hid_is_usb() check to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue.
In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler() joycon_ctlr_read_handler() casts an incoming HID input report to struct joycon_input_report and parses it, guarding the cast only with a 12-byte length check: if (size >= 12) /* make sure it contains the input report */ joycon_parse_report(ctlr, (struct joycon_input_report *)data); struct joycon_input_report is 49 bytes: a 13-byte header followed by a union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report() -> joycon_parse_imu_report() walks that union (struct offsets 13..48), so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes the guard yet is read up to 37 bytes past its declared length. The over-read bytes are decoded into accelerometer/gyroscope values and forwarded to userspace through the "(IMU)" input device, leaking driver-internal memory. data[0] and size are fully controlled by a malicious or spoofed Joy-Con/Pro Controller. Receive buffers are sized to the maximum report length, so this is an over-read within the allocation rather than a slab OOB, but the decoded bytes still reach userspace. The sibling subcmd path in joycon_ctlr_handle_event() already bounds the same cast correctly: if (size < sizeof(struct joycon_input_report) || data[0] != JC_INPUT_SUBCMD_REPLY) break; Use the same sizeof(struct joycon_input_report) bound here.
In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: register input device after capabilities are set input_register_device() exposes the device to userspace immediately. In joycon_input_create() it was called before joycon_config_rumble() configures the FF_RUMBLE capability and the memless force-feedback device, so a concurrent EVIOCSFF could dereference a NULL dev->ff. Registering early also means the initial udev event lacks button and axis information, which can make input managers ignore the device. Move input_register_device() to the end of joycon_input_create(), after all capabilities, the IMU input device and the force-feedback callbacks have been configured.
In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: stop device IO before hid_hw_stop on probe failure nintendo_hid_probe() calls hid_device_io_start() before joycon_init() and joycon_leds_create(). If either fails, the error path jumps to err_close which calls hid_hw_close()/hid_hw_stop() without first calling hid_device_io_stop(). hid_hw_stop() does not stop device IO, so hid_input_report() may still run and access driver data that is being torn down, resulting in a use-after-free. Add an err_io_stop label that calls hid_device_io_stop() before hid_hw_close(), and point the two post-io_start error paths at it.
In the Linux kernel, the following vulnerability has been resolved: HID: rapoo: fix missing hid_is_usb() check to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. Add a dependency on USB_HID for hid_is_usb(), as other HID drivers do; the alternative would be to provide a simple stub implementation on !USB_HID builds. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue.
In the Linux kernel, the following vulnerability has been resolved: HID: ft260: fix stack-use-after-return write in I2C read race ft260_i2c_read() points dev->read_buf at a caller-supplied buffer (often an on-stack variable), arms a completion and waits up to five seconds for the device to return the data. The HID input callback ft260_raw_event() runs in the input/IRQ path, independent of the dev->lock mutex held by the read path, and copies the device-supplied payload into dev->read_buf after a plain NULL check. These two paths share read_buf, read_idx and read_len with no serialization. If the device delays its response until the read times out, ft260_i2c_read() resets the controller, clears read_buf and returns, unwinding the stack frame the buffer lived in. A response that arrives at that moment lets ft260_raw_event() pass the NULL check and then memcpy() the device-controlled payload into the now-freed stack location, a bounded but attacker-influenced stack-use-after-return write triggerable by malicious or malfunctioning hardware. Add a dedicated spinlock that serializes every access to read_buf, read_idx and read_len. ft260_raw_event() now holds it across the NULL check, the memcpy and the index update, while the read path takes it when arming and when clearing the buffer, so the teardown can no longer slip between the check and the copy.
In the Linux kernel, the following vulnerability has been resolved: HID: sensor: custom: Fix use-after-free in enable_sensor enable_sensor_store() can call set_power_report_state(), which dereferences sensor_inst->power_state and sensor_inst->report_state. These pointers refer to entries in sensor_inst->fields. Create the field attributes before exposing the enable_sensor sysfs attribute, so enable_sensor cannot be accessed before the state it depends on has been initialized. On remove, delete enable_sensor before freeing the field attributes, so a concurrent sysfs write cannot dereference freed memory through power_state or report_state.
In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: fix use-after-free of inrange_timer on remove uclogic_remove() cancels the pen in-range timer and then stops the device: timer_delete_sync(&drvdata->inrange_timer); hid_hw_stop(hdev); timer_delete_sync() only guarantees the timer is idle at that instant. uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop() stops the transport several lines later, and every report with pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer: mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100)); A report landing between the timer_delete_sync() call and the transport teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled. uclogic_remove() then returns and the devm drvdata is freed, while hid_hw_stop() has already freed the input device drvdata->pen_input points at, so when the timer fires ~100 ms later uclogic_inrange_timeout() dereferences freed memory -- a use-after-free in timer-softirq context. Swapping the two calls is not a fix: stopping the device first frees drvdata->pen_input via hidinput_disconnect() while the timer may still be pending, so a timer already armed before removal fires on the freed input device in the window before timer_delete_sync() runs. Use timer_shutdown_sync() before hid_hw_stop() instead. It cancels the timer, waits for a running callback while pen_input is still valid, and prevents any further re-arming -- a later mod_timer() from an in-flight report is silently ignored -- so the timer is provably dead before hid_hw_stop() frees the inputs. This is the ordering the timer core documents for this "timer re-armed from another path" teardown case.
In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: validate initial device info bounds The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO messages that contain a HID descriptor followed by the report descriptor bytes. mousevsc_on_receive_device_info() trusts bLength and wDescriptorLength without checking that the received packet contains both byte ranges. A malformed host or backend message can therefore make the guest read past the received VMBus packet while copying the report descriptor. Pass the received initial-device-info size into the parser and reject descriptor lengths that exceed the packet. Impact: A malicious Hyper-V host or backend can crash a guest by sending a short initial device-info message with an oversized HID report descriptor length.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix LE list UAF on reset hci_cc_reset() clears the LE accept and resolving lists without taking hdev->lock. Other command-complete handlers serialize updates to these lists with that lock, and the debugfs readers hold it while walking them. This permits the reset completion and a debugfs read to interleave as follows: hci_rx_work debugfs reader ----------- -------------- lock hdev->lock fetch current entry list_del(entry) kfree(entry) read entry fields The reader then dereferences a freed list entry and may follow its stale next pointer. KASAN reported: BUG: KASAN: slab-use-after-free in white_list_show+0x15f/0x180 Read of size 1 at addr ffff8881015dab16 by task poc/95 Call Trace: white_list_show+0x15f/0x180 seq_read_iter+0x3ff/0x1190 seq_read+0x267/0x3d0 vfs_read+0x177/0xa20 ksys_read+0xf7/0x1c0 Allocated by task 91: hci_bdaddr_list_add+0x1a6/0x3a0 hci_cc_le_add_to_accept_list+0xab/0x140 hci_cmd_complete_evt+0x26c/0x9a0 hci_event_packet+0x454/0xb20 hci_rx_work+0x293/0x730 Freed by task 90: kfree+0x131/0x3c0 hci_bdaddr_list_clear+0xd8/0x160 hci_cc_reset+0x28a/0x370 hci_cmd_complete_evt+0x26c/0x9a0 hci_event_packet+0x454/0xb20 hci_rx_work+0x293/0x730 Take hdev->lock around both list clears. This matches the existing mutation and traversal locking convention.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: validate LE Set CIG Parameters response The Command Complete dispatch validates only the fixed part of the LE Set CIG Parameters response. After that part is pulled from the skb, hci_cc_le_set_cig_params() trusts num_handles and reads each entry in the trailing handle array. Matching num_handles against the command's num_cis does not guarantee that the response contains the advertised handles. A truncated response from a malfunctioning controller can therefore make the handler read beyond the skb data. Validate that the remaining skb data contains all advertised handles. Include this in the existing response validation so malformed responses also follow the established CIG failure handling.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix accept list UAF during suspend hci_update_event_filter_sync() walks hdev->accept_list while sending a synchronous HCI command for each remote-wakeup device. The suspend path holds hdev->req_lock, but accept-list updates are serialized by hdev->lock. Consequently, remove_device() can free the current list entry during the controller wait. The following interleaving causes the use-after-free: hci_update_event_filter_sync() remove_device() fetch accept-list entry hci_set_event_filter_sync() wait for controller response hci_dev_lock() list_del() kfree() hci_dev_unlock() read the freed list.next KASAN reported: BUG: KASAN: slab-use-after-free in hci_suspend_sync+0x835/0x910 Read of size 8 at addr ffff88810bec8440 by task kworker/0:1/10 Workqueue: events vhci_suspend_work Call Trace: hci_suspend_sync+0x835/0x910 hci_suspend_dev+0x182/0x450 process_one_work+0x661/0x1090 worker_thread+0x45b/0xd10 Allocated by task 86: hci_bdaddr_list_add_with_flags+0x1a8/0x400 add_device+0x381/0x820 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 91: kfree+0x131/0x3c0 remove_device+0x429/0xb70 hci_sock_sendmsg+0x1033/0x1ea0 Snapshot the remote-wakeup addresses under hdev->lock. Release the lock before sending HCI commands. Clear the controller event filter before building the snapshot, and skip allocation and the second list traversal when there are no matching entries. This preserves the original filter and scan-state updates without retaining an accept-list node across a controller wait.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: zero the sockaddr before returning it in getname iso_sock_getname() fills a struct sockaddr_iso in place and returns its size without clearing it first, so bytes it does not write are copied to user space from the kernel stack. The getsockname(2) and getpeername(2) paths both run through do_getsockname(), which hands getname() an uninitialized sockaddr_storage on the stack and copies back up to the number of bytes getname() returns, so the driver has to initialize every byte it accounts for. Two ranges are left uninitialized: - struct sockaddr_iso is 10 bytes but only 9 are written (family, iso_bdaddr, iso_bdaddr_type), leaking the trailing pad byte on every call. - for a broadcast peer (BIS_LINK or PA_LINK) the returned length grows by sizeof(struct sockaddr_iso_bc), but only bc_sid, bc_num_bis and bc_bis are filled; bc_bdaddr and bc_bdaddr_type, the first 7 bytes of that structure, are never written. An unprivileged process can open a BTPROTO_ISO socket and reach the pad leak with getsockname(); the broadcast leak needs an established BIS/PA connection. l2cap and rfcomm already memset their sockaddr in getname for the same reason; do the same here.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: reject HCI_CMD_SYNC params_len above 255 mgmt_hci_cmd_sync() checks that the message length agrees with params_len but puts no upper bound on it. params_len is __le16 while the parameter length in the HCI command header is a u8: struct hci_command_hdr { __le16 opcode; __u8 plen; } __packed; hci_cmd_sync_alloc() assigns one to the other: hdr->plen = plen; if (plen) skb_put_data(skb, param, plen); so a params_len of 256 leaves plen at 0 while all 256 bytes are still appended. The frame handed to the driver then declares no parameters and carries 256 of them. On a length framed transport such as H:4 the controller takes the trailing bytes as the start of the next packet. The mgmt socket MTU is HCI_MAX_FRAME_SIZE, so params_len can reach about 1KB this way. Commit 03f1700b9b4d ("Bluetooth: MGMT: reject malformed HCI_CMD_SYNC commands") only made params_len agree with the message length, a value that fits the message but not the header field is still accepted. Reject params_len that does not fit the header field.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_aml: validate firmware segment lengths aml_download_firmware() reads two lengths from the firmware header and uses them to build pointers before checking that the header and segment data are present. A truncated or inconsistent firmware image can make the driver read past firmware->data while constructing TCI commands. Reject images shorter than the header and ensure that the ICCM and DCCM ranges fit within the loaded firmware before downloading either segment.
In the Linux kernel, the following vulnerability has been resolved: futex: Avoid private hash use-after-free on final put futex_private_hash_put() drops the reference to fph before evaluating fph->mm for wake_up_var(). futex_ref_put() enables preemption again before returning. If that put drops the final reference and the task is preempted, another task can pivot to the replacement hash and free the old hash after an RCU grace period. The first task then reads fph->mm from the freed allocation when it resumes. KASAN reports a slab-use-after-free in futex_private_hash_put(), with the read at offset 24 in a freed kmalloc-512 allocation. The allocation and free stacks point to futex_hash_allocate() and the RCU free path, respectively. Load the mm pointer while the fph reference is still held and pass the saved value to wake_up_var(). wake_up_var() uses the pointer as a waitqueue key and does not dereference the mm through it.
In the Linux kernel, the following vulnerability has been resolved: selinux: reject a class permission count below its inherited common security_get_permissions() maps an inherited common's permissions into an array sized by the class's own permissions.nprim, but class_read() takes that nprim verbatim from the policy image and never checks that it covers the common. A class that inherits a common of N permissions while declaring a smaller nprim is accepted, and on load the common's permissions are written past the class-sized array -- an out-of-bounds heap write. Reject a class whose permission count is below its inherited common's. Well-formed policies, where the class count already includes the inherited permissions, are unaffected.
In the Linux kernel, the following vulnerability has been resolved: selinux: do not cancel a policy conversion that never started sel_write_load() calls selinux_policy_cancel() when sel_make_policy_nodes() fails, and that helper dereferences the outgoing policy to cancel its sidtab conversion. On the first policy load there is no outgoing policy: security_load_policy() returns early for that case, before it converts anything, and state->policy is still NULL. A first load that fails while building the selinuxfs tree therefore takes a NULL dereference in selinux_policy_cancel(), reached from a write(2) to /sys/fs/selinux/load. Skip the cancel when there is no old policy, mirroring the check security_load_policy() already makes before it converts.
In the Linux kernel, the following vulnerability has been resolved: selinux: reject a permission value exceeding the class permission count perm_read() bounds a permission value by SEL_VEC_MAX but never by the nprim of the owning class or common, which is taken verbatim from the policy image. security_get_permissions() then writes perms[value - 1] into an nprim-sized kcalloc() array, so a class declaring fewer permissions than its largest permission value drives an out-of-bounds heap write. The top-level symbol tables are validated this way; the nested per-class permission table is not. Reject a permission whose value exceeds nprim, which is already set when perm_read() runs. Well-formed policies are unaffected. [PM: tweak comment for line length]
In the Linux kernel, the following vulnerability has been resolved: clk: qcom: dispcc-eliza: Fix disp_cc_mdss_mdp_clk_src RCG stall on Eliza EVK Eliza EVK (eliza-cqs-evk.dts) does not have display enabled, however its Display Clock Controller is enabled and references parent clocks from DSI PHYs, which causes clock reparenting issues during probe (init) and warning on Eliza EVK: disp_cc_mdss_mdp_clk_src: rcg didn't update its configuration. WARNING: drivers/clk/qcom/clk-rcg2.c:136 at update_config+0xd4/0xe4, CPU#1: udevd/273 ... update_config (drivers/clk/qcom/clk-rcg2.c:136 (discriminator 2)) (P) clk_rcg2_shared_disable (drivers/clk/qcom/clk-rcg2.c:1471) clk_rcg2_shared_init (drivers/clk/qcom/clk-rcg2.c:1540) __clk_register (drivers/clk/clk.c:3959 drivers/clk/clk.c:4368) devm_clk_hw_register (drivers/clk/clk.c:4448 (discriminator 1) drivers/clk/clk.c:4672 (discriminator 1)) devm_clk_register_regmap (drivers/clk/qcom/clk-regmap.c:104) qcom_cc_really_probe (drivers/clk/qcom/common.c:418) qcom_cc_probe (drivers/clk/qcom/common.c:445) disp_cc_eliza_probe (dispcc-eliza.c:?) dispcc_eliza platform_probe (drivers/base/platform.c:1432)
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables_offload: suppress WARN_ON_ONCE for ENOMEM in abort path In nft_flow_rule_offload_abort(), WARN_ON_ONCE(err) is triggered on every error during rollback, including -ENOMEM. Memory allocation failures are expected under low-memory conditions and do not indicate a kernel bug. Trace for example: nft_flow_offload_chain() // FLOW_BLOCK_BIND nft_flow_block_chain() nft_chain_offload_cmd() nft_block_offload_cmd() ->ndo_setup_tc() nsim_setup_tc() flow_block_cb_setup_simple() flow_block_cb_alloc() // fails to -ENOMEM The warning was reproduced on the 5.10 stable kernel under memory pressure via fault injection, but the underlying bug exists in mainline as well, as demonstrated by the ENOMEM trace above. The following splat was triggered during nf_tables transaction processing: WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline] WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591 Modules linked in: CPU: 0 PID: 8567 Comm: syz-executor.0 Not tainted 5.10.260-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline] RIP: 0010:nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591 Call Trace: nf_tables_commit+0x3bd/0x4bd0 net/netfilter/nf_tables_api.c:8604 nfnetlink_rcv_batch+0xb1e/0x1f20 net/netfilter/nfnetlink.c:509 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:579 [inline] nfnetlink_rcv+0x3b3/0x420 net/netfilter/nfnetlink.c:597 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x6cd/0xa00 net/netfilter/af_netlink.c:1340 netlink_sendmsg+0x906/0xe10 net/netfilter/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x155/0x190 net/socket.c:663 ____sys_sendmsg+0x705/0x870 net/socket.c:2379 ___sys_sendmsg+0x100/0x170 net/socket.c:2433 __sys_sendmsg+0xe9/0x1c0 net/socket.c:2462 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Change the condition to WARN_ON_ONCE(err && err != -ENOMEM) so that warnings are only emitted for unexpected errors. This aligns with the common kernel practice of not warning on -ENOMEM. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: ASoC: xilinx: formatter_pcm: pass aud_drv_data to irq handlers The irq handlers take a struct device pointer and call dev_get_drvdata() to obtain the driver data. However, the driver data is only set at the end of probe, after devm_request_irq(), so an interrupt taken in between causes the handlers to pass a NULL pointer to readl() and crash. Pass the private data directly as the devm_request_irq() argument instead of the device pointer, matching what the handlers expect.
In the Linux kernel, the following vulnerability has been resolved: af_packet: Don't send zero-byte data in tpacket_snd(). syzbot reported a WARNING in __dev_queue_xmit() triggered via tpacket_snd(): skb_assert_len WARNING: at include/linux/skbuff.h:2753 skb_assert_len WARNING: at __dev_queue_xmit+0x21bc/0x4970 net/core/dev.c:4781 Call Trace: <TASK> dev_queue_xmit include/linux/netdevice.h:3448 [inline] packet_xmit+0x243/0x310 net/packet/af_packet.c:276 tpacket_snd net/packet/af_packet.c:2907 [inline] packet_sendmsg+0x28d6/0x4eb0 net/packet/af_packet.c:3134 When sending 0-byte packets via TPACKET ring buffer on devices with no hard header (e.g. dev->hard_header_len == 0), tpacket_fill_skb() populates an skb with skb->len == 0 and returns 0. tpacket_snd() then forwards this empty skb to packet_xmit(), causing __dev_queue_xmit() to hit skb_assert_len(skb). Similar checks exist in packet_snd() via commit dc633700f00f ("net/af_packet: check len when min_header_len equals to 0") and in packet_sendmsg_spkt() via commit 6a341729fb31 ("af_packet: Don't send zero-byte data in packet_sendmsg_spkt()."). Return -EINVAL in tpacket_fill_skb() when skb->len is zero to reject zero-length packets in tpacket_snd().
In the Linux kernel, the following vulnerability has been resolved: drm/log: Fix infinite loop when scale is too large for display When scale is large enough that scaled_font exceeds the display dimensions, rows or columns become 0. A columns value of 0 causes an infinite loop in drm_log_draw_kmsg_record() because the loop never decrements len. Check for zero rows/columns in drm_log_setup_modeset() and return an error, cleaning up the already allocated buffer to avoid a leak.
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, Check if flow is PEER before acquiring devcom lock In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring ESW devcom lock without condition. In addition, in case of peer_flow, __mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock. This results in an AA deadlock. To fix this, introduce a new PEER flag that is set on flows created as peer flows (the duplicate flows on peer devices), and check it in mlx5e_tc_del_flow() before acquiring ESW devcom lock. Lockdep splat: ============================================ WARNING: possible recursive locking detected ============================================ Possible unsafe locking scenario: CPU0 ---- lock(&comp->lock_key#2); lock(&comp->lock_key#2); *** DEADLOCK *** Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_deadlock_bug.cold+0xbd/0xca __lock_acquire+0x1671/0x2ec0 lock_acquire+0x10e/0x2e0 down_read+0x95/0x430 mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core] mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core] mlx5e_flow_put+0x99/0x100 [mlx5_core] __mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core] mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core] mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core] mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core] tc_setup_cb_add+0x1dc/0x470 fl_change+0x2f4d/0x626d [cls_flower] tc_new_tfilter+0x79b/0x2310 rtnetlink_rcv_msg+0x778/0xad0 do_syscall_64+0x70/0x960 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK>
In the Linux kernel, the following vulnerability has been resolved: net: remove WARN_ON_ONCE() from sk_mc_loop() sk_mc_loop() can be called for sockets that are neither AF_INET nor AF_INET6 (e.g. AF_PACKET sockets when sending packets via raw/packet socket over virtual devices such as VRF or ipvlan). In such cases, sk_family is not AF_INET/AF_INET6 and sk_mc_loop() falls through the switch statement and triggers WARN_ON_ONCE(1). Non-INET sockets do not support IP_MULTICAST_LOOP or IPV6_MULTICAST_LOOP options, so loopback should default to true without generating a warning.
In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix crash passing ERR_PTR to kthread_stop() In test_ringbuffer()'s out_free cleanup loop, the check `!rb_threads[cpu]` only catches NULL entries and misses entries that hold an ERR_PTR. rb_threads[] is static, so unassigned slots are NULL. But when kthread_run_on_cpu() fails for a cpu, it stores ERR_PTR(-ENOMEM) (or -EINTR) in rb_threads[cpu] before the creation loop jumps to out_free. That entry is non-NULL, so the old `!ptr` check does not break, and the cleanup proceeds to call kthread_stop() on the ERR_PTR. kthread_stop() then dereferences the bogus pointer, crashing the kernel during the late_initcall self-test. crash logs: BUG: kernel NULL pointer dereference, address: 000000000000001c Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 7.2.0-rc6-dirty #7 PREEMPT(lazy) RIP: 0010:kthread_stop+0x2e/0x220 RBX: fffffffffffffff4 CR2: 000000000000001c Call Trace: <TASK> test_ringbuffer+0x1ec/0x650 do_one_initcall+0x6c/0x2c0 kernel_init_freeable+0x21d/0x420 kernel_init+0x15/0x1c0 ret_from_fork+0x21b/0x320 </TASK> Kernel panic - not syncing: Fatal exception
In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: initialise workingset state before folio split xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but __folio_split() leaves the xa_state's xa_lru unset. That lets a live, memcg-charged xa_node exist without being linked into the mapping's shadow_nodes list_lru; when reclaim later walks the list_lru it trips VM_WARN_ON(!css_is_dying()). Use mapping_set_update() to install both the workingset update callback and the shadow_nodes list_lru on the xa_state.
In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amdgpu: fix aperture mapping leak" devres teardown is LIFO. The aperture devres node was registered after the DRM device node, so devres_release_all() unmaps the aperture before the DRM device release callback fires amdgpu_device_fini_sw(). IP sw_fini callbacks (e.g. vcn_v4_0_sw_fini) write to fw_shared through a pointer derived from aper_base_kaddr, causing a kernel page fault on probe failure / rollback: BUG: unable to handle page fault ... PMD 0 RIP: vcn_v4_0_sw_fini+0x7b/0x170 [amdgpu] Call Trace: amdgpu_device_fini_sw amdgpu_driver_release_kms devm_drm_dev_init_release devres_release_all This reverts commit d871e99879cb5fd1fa798b006b4888887e63a17a. (cherry picked from commit 336e0cd576817ac64a4b394ca2b3680029f3e37f)
In the Linux kernel, the following vulnerability has been resolved: x86/mce: Set up the polling timer before CMCI discovery I hit the following on one of my machines: mce: CPU0 BANK15 CMCI inherited storm ------------[ cut here ]------------ ODEBUG: assert_init not available (active state 0) object: (____ptrval____) object type: timer_list hint: 0x0 WARNING: lib/debugobjects.c:632 at debug_object_assert_init+0x178/0x230, CPU#0: swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc5 #3 PREEMPTLAZY RIP: 0010:debug_object_assert_init+0x18f/0x230 Call Trace: <TASK> __mod_timer mce_timer_kick cmci_discover intel_init_cmci mce_intel_feature_init mcheck_cpu_init identify_cpu identify_boot_cpu arch_cpu_finalize_init start_kernel A second splat follows right after, from timer_setup() finding that same timer already queued: ODEBUG: init active (active state 0) object: (____ptrval____) object type: timer_list hint: stub_timer+0x0/0x10 This is happening because CMCI storm detection is trying to modify the timer before latter was properly set up. Set up the timer first. __mcheck_cpu_setup_timer() only calls timer_setup(), and depends on neither the generic nor the vendor init. [ bp: Massage commit message. ]
In the Linux kernel, the following vulnerability has been resolved: mm: mglru: fix stale batch updates after memcg reparenting The mglru page table walker batches per-generation size deltas in walk->nr_pages while walking page tables without holding the lruvec lock. The reset_batch_size() later folds those deltas into walk->lruvec under the lruvec lock. The page table walker can run concurrently with the memcg reparenting path as follows: CPU0 CPU1 ==== ==== walk_mm --> walk_page_range --> update_batch_size --> walk->nr_pages += delta mem_cgroup_css_offline --> memcg_reparent_objcgs --> lock lruvec lru_gen_reparent_memcg --> reparent child folios to parent unlock lruvec lock lruvec reset_batch_size --> child lrugen->nr_pages += delta This will trigger the following warning in lru_gen_exit_memcg(): VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0, sizeof(lruvec->lrugen.nr_pages))); And the user-visible impact of underestimated nr_pages in MGLRU was premature OOMs because MGLRU does not try to reclaim memory when nr_pages reaches zero, but there are still more pages. To fix it, make reset_batch_size() check CSS_DYING under RCU before flushing the pending batch. A non-dying memcg keeps the original lruvec stable against RCU-delayed offlining; a dying memcg redirects the deltas to the first non-dying ancestor.
In the Linux kernel, the following vulnerability has been resolved: igc: remove napi_synchronize() in igc_down() When an AF_XDP zero-copy application is killed abruptly, the XSK pool is torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the full budget on every poll, so napi_complete_done() never clears NAPI_STATE_SCHED. igc_down() calls napi_synchronize() before napi_disable(), so it spins forever waiting for that bit and the interface never goes down. Drop the napi_synchronize() and let napi_disable() do the job -- it sets NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after polling has stopped, matching the recent igb fix b1e067240379.
In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: handle missing status supplier MAX17040 does not report charger state itself, so the driver forwards POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is registered, power_supply_get_property_from_supplier() returns -ENODEV and leaves the output value untouched. max17040_get_property() currently ignores that error and returns success, so userspace can read an uninitialized status value from the battery power supply. This happens on systems that use the fuel gauge without a charger supplier relationship in firmware. Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and propagate other supplier lookup errors.
In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey() The helper function _ip_cprb_helper() uses internal buffer memory for building and processing CPRBs. After use this buffer was never scrubbed which could lead to leaving for example clear key material in memory which could be exposed via tricky reuse of this same memory. Extend the _ip_cprb_helper() function with another parameter 'scrub' used to steer scrubbing of this buffer. So now the caller has the opportunity to decide if scrubbing is needed or not. Extend the clear key to secure key token import process in function cca_clr2cipherkey() to tell the helper function from above to scrub the cprb buffer when the clear key value is part of the request data. Add explicit scrubbing on return from function cca_clr2cipherkey() for the random EXOR buffer and the cprb buffer. Overall this cleans the internal used buffer in case of clear key import to prevent sensitive data to get exposed.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check if dml21_add_phantom_plane() is successful Verify that the phantom plane was allocated to avoid a later segfault. (cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f)
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: use proper context for logging The same as the rest of the code, get_ss_info_from_atombios() uses calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is initialized only later in calc_pll_max_vco_construct(). Therefore, any output using DC_LOG_SYNC() leads to a NULL pointer deference in get_ss_info_from_atombios(). According to Sashiko, the very same problem exists in dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too. To avoid accessing the NULL context, use clk_src->base.ctx->logger everywhere. That context in base is initialized earlier in dce110_clk_src_construct() and dce112_clk_src_construct(). Before get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions above are actually called. This is done by redefining DC_LOGGER to CTX->logger. Before: dce110_clk_src_construct() did: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM -> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx After: dce110_clk_src_construct() does: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses clk_src->base.ctx (cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0)
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix missing authorization check in KFD_IOC_DBG_TRAP_DISABLE Prevent unauthorized termination of active GPU debug sessions. Previously, users with /dev/kfd access could terminate another process's debug session without proper ownership or ptrace authorization. (cherry picked from commit 4db4c5ffd5585b72622ecf6ffedf2da258ee23f5)
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: enforce cursor size limits for MOB cursors vmw_cursor_plane_atomic_check() bounds cursor width and height only on the legacy update path; the SVGA_CAP2_CURSOR_MOB path -- the default on modern hosts -- accepts any size. When the requested size exceeds SVGA_REG_CURSOR_MAX_DIMENSION or SVGA_REG_MOB_MAX_SIZE, vmw_cursor_mob_get() returns -EINVAL and leaves vps->cursor.mob NULL. Its return value is then discarded in vmw_cursor_plane_prepare_fb(), so the subsequent vmw_cursor_update_mob() calls vmw_bo_map_and_cache(NULL) and oopses inside vmw_bo_map_and_cache_size() on the tbo.base.size load. Reachable from any DRM master via DRM_IOCTL_MODE_CURSOR2 with a sufficiently large width or height (e.g. cursor_max_dim + 1). Reject oversized cursors in atomic_check for both MOB-backed cursor update types. The MOB byte-size limit only applies to the SVGA_CAP2_CURSOR_MOB path (vmw_cursor_mob_size() returns 0 for GB_ONLY); compute the required MOB size in 64-bit to avoid overflow when very large dimensions are requested. In prepare_fb only call vmw_cursor_mob_get()/_map() for VMW_CURSOR_UPDATE_MOB -- the GB_ONLY path uses bo->map.virtual directly and would otherwise be silently downgraded to NONE on hosts without SVGA_CAP2_CURSOR_MOB (where vmw_cursor_mob_get() always returns -EINVAL). Degrade the update to NONE if vmw_cursor_mob_get() or vmw_cursor_mob_map() fails so the update path does not run with a NULL backing MOB.
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Avoid double-deactivate of IRQs in the nested context In the nested state, the physical interrupt has already been deactivated through the HW bit in the LR. The extra deactivation would be harmless but can hit an errata case on AmpereOne, so avoid it here. On AmpereOne, deactivating a physical interrupt through ICC_DIR_EL1 or ICC_EOIR1_EL1 (depending on EOImode) which is not active, but is the highest priority pending interrupt causes the cpu to lose the interrupt pending state and also prevents the delivery of future interrupts.
In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix double free of wq, engine, and group structs The release callbacks for wq, engine, and group devices (idxd_conf_wq_release, idxd_conf_engine_release, idxd_conf_group_release) each call kfree() on the enclosing struct. The setup error paths and cleanup functions also call kfree() explicitly after put_device(), producing a double free whenever put_device() drops the reference count to zero and fires the release. In the setup functions, device_initialize() is called before device_add(), so the reference count is exactly 1 at the error sites. put_device() unconditionally fires the release, which frees the struct; the subsequent explicit kfree() then operates on freed memory. For idxd_setup_wqs(), the wq release callback also owns opcap_bmap and wqcfg. The error unwind additionally freed those fields explicitly before calling put_device(), causing further double frees on both. Remove the redundant explicit kfree() calls from all setup error paths and cleanup functions for wq, engine, and group structs, delegating sole ownership of those allocations to the release callbacks.
In the Linux kernel, the following vulnerability has been resolved: erofs: ensure valid f_path for page cache sharing Previously, backing files for page cache sharing were set up with f_path left as NULL (only f_inode was valid). It worked, but a recent mincore fix relies on f_path.mnt and crashes (found by "erofs/028" on 7.2-rc4): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 675528 Comm: fincore Not tainted 7.2.0-rc4-00002-g[]-dirty #1 PREEMPT(lazy) Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014 RIP: 0010:__do_sys_mincore+0xc0/0x2c0 ... Specify valid paths using valid disconnected dentries together with erofs_ishare_mnt instead of leaving f_path empty, so they are more like real backing files in a pseudo filesystem and standard backing_file_open() can be used directly.
In the Linux kernel, the following vulnerability has been resolved: hwmon: (sht3x) Fix unaligned accesses Sashiko reports: In sht3x_update_client(), the 16-bit temperature and humidity values are extracted from a stack-allocated byte array using be16_to_cpup(). The pointers passed to this function are calculated as buf and buf + 3. Since the difference between the two pointers is an odd number of bytes, at least one of them is guaranteed to be at an unaligned offset. This will trigger an alignment fault on strict-alignment architectures such as ARMv5 or SPARC, resulting in a kernel panic. Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(), and put_unaligned_be16() instead of cpu_to_be16().
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Initialize hba->rpmbs list in ufshcd Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL pointer dereference in the device teardown path if ufs_rpmb_probe() fails.
In the Linux kernel, the following vulnerability has been resolved: tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map(). If these functions are invoked while mmio_trace_array is NULL (e.g. before initialization or after disabled), accessing tr->array_buffer.buffer will result in a NULL pointer dereference crash. Fix this by adding an explicit NULL check for tr at the beginning of __trace_mmiotrace_rw() and __trace_mmiotrace_map().
In the Linux kernel, the following vulnerability has been resolved: riscv: drop __init from vec_check_unaligned_access_speed_all_cpus This function runs within a kthread and need not necessarily finish before system finishes boot and free_initmem() unmaps the .init.text section. This function makes calls to SBI for probing unaligned access speed, and if this is slow for some reason (say some debug prints were added to SBI), the kthread can still be running at this point and result in an instruction page fault when trying to fetch from the freed region. [ 25.642087] Unable to handle kernel paging request at virtual address ffffffff80a04ef8 [ 25.646694] Current vec_check_unali pgtable: 4K pagesize, 48-bit VAs, pgdp=0x00004000316e9000 [ 25.653170] [ffffffff80a04ef8] pgd=000010004be7e401, p4d=000010004be7e401, pud=000010004be7e001, pmd=000010000c3000e3 [ 25.661244] Oops [#1] [ 25.662997] Modules linked in: [ 25.665357] CPU: 3 UID: 0 PID: 42 Comm: vec_check_unali Not tainted 7.0.0-tt-blackhole-asrinivasan-00007-g30ff73f18211 #570 PREEMPTLAZY [ 25.674669] Hardware name: Tenstorrent Blackhole (DT) [ 25.678545] epc : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.683458] ra : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.688372] epc : ffffffff80a04ef8 ra : ffffffff80a04ef8 sp : ffff8f8000203e20 [ 25.693874] gp : ffffffff814dc168 tp : ffffaf8001ad9900 t0 : 0000000000000000 [ 25.699401] t1 : fffffffffffffff0 t2 : ffffaf8001ad9a10 s0 : ffff8f8000203e30 [ 25.704912] s1 : ffffaf80018dc780 a0 : 0000000000000000 a1 : 0000000000000002 [ 25.710407] a2 : 00000000000001f0 a3 : 0000000000000018 a4 : 0000000000000000 [ 25.715917] a5 : 0000000000000000 a6 : ffffaf8001c03d98 a7 : ffffaf8001c03e30 [ 25.721419] s2 : ffff8f8000023c98 s3 : ffffaf8001aa1240 s4 : ffffffff80a04ee0 [ 25.726937] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 [ 25.732450] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 [ 25.737944] s11: 0000000000000000 t3 : 0000000000000002 t4 : 0000000000000402 [ 25.743481] t5 : 0000000000000040 t6 : 0000000000000004 ssp : 0000000000000000 [ 25.749024] status: 0000000200000120 badaddr: ffffffff80a04ef8 cause: 000000000000000c [ 25.755060] [<ffffffff80a04ef8>] vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.760964] [<ffffffff80047a10>] kthread+0xd8/0xfc [ 25.764660] [<ffffffff80010c48>] ret_from_fork_kernel+0x18/0x1c4 [ 25.769220] [<ffffffff80895fe6>] ret_from_fork_kernel_asm+0x16/0x18 [ 25.774018] Code: cccc cccc cccc cccc cccc cccc cccc cccc cccc cccc (cccc) cccc Drop __init from its signature so that this doesn't happen.
In the Linux kernel, the following vulnerability has been resolved: iommufd/viommu: Release the igroup lock on the vdevice_size error path iommufd_vdevice_alloc_ioctl() takes idev->igroup->lock, then validates the driver's vdevice_size against the core structure size with a WARN_ON_ONCE. On failure that guard jumps to out_put_idev, below out_unlock_igroup, so it skips the mutex_unlock(), leaving the igroup lock held and deadlocking the next vDEVICE operation on that group. Jump to out_unlock_igroup instead.
In the Linux kernel, the following vulnerability has been resolved: mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE pte_pfn() and pte_dirty() have undefined behaviour when called on a non-present PTE. In migrate_vma_collect_pmd(), these functions may be invoked on non-present entries (e.g., device-private entries), leading to potential crashes from pte_pfn() or incorrect dirty folio accounting from pte_dirty(). Fix both by guarding with pte_present() checks.
In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential NULL pointer dereference dasd_release_space() checks the implementation of the is_ese() discipline function before calling it to determine if a given device is an ESE DASD. The current usage of the logical AND operator will lead to a NULL pointer dereference as the function is called even if the function pointer is NULL. Fix this by using the logical OR operator.
In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]
In the Linux kernel, the following vulnerability has been resolved: bpf: Disable xfrm_decode_session hook attachment BPF LSM programs can currently attach to xfrm_decode_session(). That hook may return an error, but security_skb_classify_flow() calls it from a void path and triggers BUG_ON() if an error is returned. Disable BPF attachment to the hook to prevent a BPF LSM program from turning packet classification into a full panic.
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, MPESW, Fix missing complete() on devcom error mlx5_mpesw_work() returned without calling complete() when mlx5_lag_get_devcom_comp() returned NULL. A caller that queued the work and waited on mpesww->comp would block indefinitely. Funnel the early-return path through a new "complete" label so the waiter is always woken.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: sco: Fix a race condition in sco_sock_timeout() sco_sock_timeout() runs asynchronously and lock_sock(sk). If the socket is closing while the timer is running, it holds the same lock (lock_sock(sk)) twice, leading to a deadlock. CPU 0 CPU 1 ==================== ====================== sco_sock_close() sco_sock_timeout() lock_sock(sk) // <-- LOCK __sco_sock_close() sco_chan_del() sco_conn_put() sco_conn_free() disable_delayed_work_sync() lock(sk) // <-- SAME LOCK Fix this by moving disable_delayed_work_sync() outside of lock_sock(sk), ensuring that no lock_sock(sk) is held before sco_sock_timeout(). Lockdep splat: WARNING: possible circular locking dependency detected 6.13.0-rc4 #7 Not tainted syz-executor292/9514 is trying to acquire lock: ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_lock_acquire sect/v6.13-rc4/./include/linux/rcupdate.h:337 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_read_lock sect/v6.13-rc4/./include/linux/rcupdate.h:849 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4137 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: __flush_work+0xd1/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195 but task is already holding lock: ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline] ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_close+0x25/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:524 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}: lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849 lock_sock_nested+0x48/0x130 sect/v6.13-rc4/net/core/sock.c:3622 lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline] sco_sock_timeout+0xbe/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:158 process_one_work sect/v6.13-rc4/kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa99/0x18f0 sect/v6.13-rc4/kernel/workqueue.c:3310 worker_thread+0x8a9/0xd80 sect/v6.13-rc4/kernel/workqueue.c:3391 kthread+0x2c6/0x360 sect/v6.13-rc4/kernel/kthread.c:389 ret_from_fork+0x4e/0x80 sect/v6.13-rc4/arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 sect/v6.13-rc4/arch/x86/entry/entry_64.S:244 -> #0 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}: check_prev_add sect/v6.13-rc4/kernel/locking/lockdep.c:3161 [inline] check_prevs_add sect/v6.13-rc4/kernel/locking/lockdep.c:3280 [inline] validate_chain+0x1888/0x5760 sect/v6.13-rc4/kernel/locking/lockdep.c:3904 __lock_acquire+0x13b4/0x2120 sect/v6.13-rc4/kernel/locking/lockdep.c:5226 lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849 touch_work_lockdep_map sect/v6.13-rc4/kernel/workqueue.c:3909 [inline] start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4163 [inline] __flush_work+0x70f/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195 __cancel_work_sync sect/v6.13-rc4/kernel/workqueue.c:4351 [inline] disable_delayed_work_sync+0xbb/0xf0 sect/v6.13-rc4/kernel/workqueue.c:4514 sco_conn_free sect/v6.13-rc4/net/bluetooth/sco.c:95 [inline] kref_put sect/v6.13-rc4/./include/linux/kref.h:65 [inline] sco_conn_put+0x18f/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:107 sco_chan_del+0xe2/0x210 sect/v6.13-rc4/net/bluetooth/sco.c:236 sco_sock_close+0x8f/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:526 sco_sock_release+0x62/0x2d0 sect/v6.13-rc4/net/blueto ---truncated---
In the Linux kernel, the following vulnerability has been resolved: hwmon: (occ) unregister sysfs devices outside occ lock occ_active(false) and occ_shutdown() unregister sysfs-backed devices while occ->lock is held. hwmon_device_unregister() and sysfs_remove_group() can wait for active sysfs callbacks to drain, and those callbacks can enter the OCC update path and try to take occ->lock again. That gives the unregister paths the lock ordering occ->lock -> sysfs callback drain, while a callback has the opposite edge sysfs callback -> occ->lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the real unregister and callback carrier: occ_shutdown() hwmon_device_unregister() occ_show_temp_1() occ_update_response() Lockdep reported the circular dependency with occ_shutdown() already holding the OCC mutex and hwmon_device_unregister() waiting on the sysfs side: WARNING: possible circular locking dependency detected ... (sysfs_lock) ... at: hwmon_device_unregister+0x12/0x30 [vuln_msv] ... (&test_occ.lock) ... at: occ_shutdown.constprop.0+0xe/0x40 [vuln_msv] occ_update_response.isra.0+0xb/0x20 [vuln_msv] occ_show_temp_1.constprop.0.isra.0+0x23/0x40 [vuln_msv] *** DEADLOCK *** Serialize hwmon registration and removal with a separate hwmon_lock. Under that lock, detach occ->hwmon and update occ->active while occ->lock is held so concurrent OCC state changes still see a stable state, then drop occ->lock before calling hwmon_device_unregister(). Remove the driver sysfs group before taking occ->lock in occ_shutdown(), so draining the driver attributes cannot wait while the OCC mutex is held. Also make OCC update callbacks return -ENODEV after deactivation, so callbacks that already passed sysfs active protection do not poll the hardware after teardown has detached the hwmon device.
In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: defer reset until cmd_mutex is unlocked vub300_cmndwork_thread() holds cmd_mutex while it sends a command and waits for the command response. If the response wait times out, __vub300_command_response() kills the command URBs and then synchronously resets the USB device through usb_reset_device(). That reset path re-enters the driver through vub300_pre_reset(), which also takes cmd_mutex. The worker therefore tries to acquire the same mutex recursively while it is still holding it from the command path. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the real worker and timeout/reset carrier: vub300_cmndwork_thread() __vub300_command_response() usb_lock_device_for_reset() usb_reset_device() vub300_pre_reset() Lockdep reported the same-task recursive acquisition on cmd_mutex: WARNING: possible recursive locking detected ... (&test_vub300.cmd_mutex) ... at: usb_reset_device... [vuln_msv] ... (&test_vub300.cmd_mutex) ... at: vub300_cmndwork_thread+0x12/0x20 [vuln_msv] Workqueue: vub300_cmd_wq vub300_cmndwork_thread [vuln_msv] *** DEADLOCK *** Return a flag from __vub300_command_response() when the timeout path needs a device reset, then perform the reset after vub300_cmndwork_thread() has cleared the in-flight command state and dropped cmd_mutex. The reset is still attempted before mmc_request_done(), preserving the existing request completion ordering while avoiding the recursive lock.
In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Fix null-ptr-deref in dw_dp_remove() Attempting to access driver data in the platform driver ->remove() callback may lead to a null pointer dereference since there is no guaranty that the component ->bind() callback invoking platform_set_drvdata() was executed. A common scenario is when Rockchip DRM driver didn't manage to run component_bind_all() because of an (unrelated) error causing early return from rockchip_drm_bind(). Drop the unnecessary call to platform_get_drvdata() and, instead, reference the target device structure via platform_device.
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer The management mailbox channel cleanup helpers can be called from error handling paths when mgmt_chann has already been destroyed. Add NULL checks to xdna_mailbox_free_channel() and xdna_mailbox_stop_channel() so the cleanup path safely returns instead of dereferencing a NULL mailbox channel pointer.
In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Fix race condition in event registration The zynqmp_power driver registers handlers for suspend and subsystem restart events using register_event(). However, the work structures (zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by these handlers were allocated and initialized after the registration call. This created a race window where, if the firmware triggered an event immediately after registration but before allocation, the callback (suspend_event_callback or subsystem_restart_event_callback) would dereference a NULL pointer in work_pending(), leading to a crash. Fix this by allocating and initializing the work structures before registering the events.
In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Shutdown and free rx mailbox channel A mbox rx channel is requested using mbox_request_channel_byname() in probe. In remove callback, the rx mailbox channel is cleaned up when the rx_chan is NULL due to incorrect condition check. The mailbox channel is not shutdown and it can receive messages even after the device removal. This leads to use after free. Also the channel resources are not freed. Fix this by checking the rx_chan correctly.
In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Treat zero-length cert chain as query for blob lengths When handling a PDH export, treat a zero-length userspace cert chain buffer as a request to query the length of the relevant blobs. Failure to account for the zero-length buffer trips a BUG_ON() when running with CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation). kernel BUG at arch/x86/mm/physaddr.c:28 ! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded Tainted: G W 6.18.16-smp-DEV #1 NONE Tainted: [W]=WARN Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 RIP: 0010:__phys_addr+0x16a/0x180 arch/x86/mm/physaddr.c:28 RSP: 0018:ffffc9008329fc80 EFLAGS: 00010293 RAX: ffffffff8179110a RBX: 0000778000000010 RCX: ffff8884e6992600 RDX: 0000000000000000 RSI: 0000000080000010 RDI: 0000778000000010 RBP: ffffc9008329fdf0 R08: 0000000000000dc0 R09: 00000000ffffffff R10: dffffc0000000000 R11: fffffbfff126d297 R12: dffffc0000000000 R13: 1ffff92010653fc8 R14: 0000000080000010 R15: dffffc0000000000 FS: 0000555556bec9c0(0000) GS:ffff88aa4ce1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd3159e7000 CR3: 00000004fbc44000 CR4: 0000000000350ef0 Call Trace: <TASK> [<ffffffff853d3869>] sev_ioctl_do_pdh_export+0x559/0x7a0 drivers/crypto/ccp/sev-dev.c:2308 [<ffffffff853d1fdd>] sev_ioctl+0x2cd/0x480 drivers/crypto/ccp/sev-dev.c:2556 [<ffffffff82549ebc>] vfs_ioctl fs/ioctl.c:52 [inline] [<ffffffff82549ebc>] __do_sys_ioctl fs/ioctl.c:598 [inline] [<ffffffff82549ebc>] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584 [<ffffffff8630115f>] do_syscall_x64 arch/x86/entry/syscall_64.c:64 [inline] [<ffffffff8630115f>] do_syscall_64+0x9f/0xf40 arch/x86/entry/syscall_64.c:98 [<ffffffff81000136>] entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fd3158eac39 </TASK> Thankfully, the bug is benign outside of CONFIG_DEBUG_VIRTUAL=y as getting the physical address is just arithmetic, and the PSP errors out before trying to write to the garbage address (which it must, otherwise querying the blob lengths would clobber memory at pfn=0).
In the Linux kernel, the following vulnerability has been resolved: crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL dsm_create() initially checks pdev->bus when computing segment_id: u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0; But the next two lines unconditionally dereference pdev->bus via pcie_find_root_port() and especially pci_dev_id(pdev), which expands to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact NULL, segment_id is initialised to 0 but the very next statement crashes the kernel. smatch flags this: drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we previously assumed 'pdev->bus' could be null (see line 251) Make the NULL handling consistent: if pdev->bus is NULL the device has no PCI context to work with and SEV TIO setup cannot proceed, so return -ENODEV before any of the bus-dependent lookups. The remaining initialisation now runs only on the path where pdev->bus is known to be valid. No change for callers where pdev->bus is non-NULL, which is the only case where dsm_create() did meaningful work before this change.
In the Linux kernel, the following vulnerability has been resolved: media: atomisp: gc2235: fix UAF and memory leak gc2235_probe() handles its error paths incorrectly. If media_entity_pads_init() fails, gc2235_remove() is called, which tears down the subdev and frees dev, but then still falls through to atomisp_register_i2c_module(). This results in use-after-free. If atomisp_register_i2c_module() fails, the media entity and control handler are left initialized and dev is leaked. gc2235_remove() unconditionally calls media_entity_cleanup() and v4l2_ctrl_handler_free(), but these are not initialized at every error path in gc2235_probe(). Replace gc2235_remove() calls in the probe error paths with explicit unwind labels that free only the resources initialized at each point of failure, in reverse order of initialization.
In the Linux kernel, the following vulnerability has been resolved: pinctrl: spacemit: fix NULL check in spacemit_pin_set_config spacemit_pin_set_config() looks up the per-pin descriptor with spacemit_get_pin() then checks the wrong variable for failure: const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin); ... if (!pin) return -EINVAL; reg = spacemit_pin_to_reg(pctrl, spin->pin); pin is an unsigned int pin id, where 0 (GPIO_0 / gmac0_rxdv on K3) is a valid pin, so rejecting it here drops the PAD config write for the first pin of every group. On K3 Pico-ITX the GMAC RGMII group lists pin 0 as its first entry, so its drive-strength / bias configuration was silently ignored. The intended guard is against spacemit_get_pin() returning NULL when the pin id isn't in the SoC's pin table. Check spin instead, which both restores PAD setup for pin 0 and prevents a NULL deref on spin->pin.
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix warning in poll cq direct mode CQs allocated by ib_alloc_cq() always have a comp_handler. Though in direct mode this handler is never expected to be called, it is still called when the driver is reset, triggering the following WARN_ONCE(): Call trace: ib_cq_completion_direct+0x38/0x60 hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2] hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2] hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2] hclge_notify_roce_client+0x60/0xbc [hclge] hclge_reset_rebuild+0x48/0x34c [hclge] hclge_reset_subtask+0xcc/0xec [hclge] hclge_reset_service_task+0x80/0x160 [hclge] hclge_service_task+0x50/0x80 (hclge] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18
In the Linux kernel, the following vulnerability has been resolved: ocfs2: don't BUG_ON an invalid journal dinode [BUG] A fuzzed OCFS2 image can corrupt the current slot journal dinode while mount is still in progress. The mount path first reports the invalid journal block and then crashes in shutdown: kernel BUG at fs/ocfs2/journal.c:1034! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034 Call Trace: ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116 ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline] ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083 get_tree_bdev_flags+0x38b/0x640 fs/super.c:1698 get_tree_bdev+0x24/0x40 fs/super.c:1721 ocfs2_get_tree+0x21/0x30 fs/ocfs2/super.c:1184 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... [CAUSE] ocfs2_journal_toggle_dirty() used to return -EIO when journal->j_bh no longer contained a valid dinode, because the startup and shutdown paths already handled that failure. Commit 10995aa2451a ("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.") changed the check to a BUG_ON() under the assumption that the journal dinode had already been validated. That turns an unexpected invalid journal dinode during mount teardown into a kernel crash instead of a normal mount failure. [FIX] Replace the BUG_ON() with WARN_ON() and return -EIO. This keeps the invariant warning for debugging, but restores the original behavior of failing startup or shutdown cleanly instead of panicking the kernel.
In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Fix call trace due to missing release() When unloading the igen6_edac driver, there is a call trace: Device '(null)' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst. WARNING: drivers/base/core.c:2567 at device_release+0x84/0x90, CPU#5: rmmod/127209 ... RIP: 0010:device_release+0x84/0x90 Call Trace: <TASK> kobject_put+0x8c/0x220 put_device+0x17/0x30 igen6_unregister_mcis+0xa2/0xe0 [igen6_edac] igen6_remove+0x82/0xb0 [igen6_edac] ... Fix the call trace by providing empty release() functions for the memory controller devices.
In the Linux kernel, the following vulnerability has been resolved: liveupdate: Reference count incoming FLB data Increment the incoming FLB refcount in liveupdate_flb_get_incoming() so that the FLB structure cannot be freed while the caller is actively using it. Add an additional liveupdate_flb_put_incoming() function so the caller can explicitly indicate when it is done using the FLB data. During a Live Update, a subsystem might need to hold onto the incoming File-Lifecycle-Bound (FLB) data for an extended period, such as during device enumeration. Incrementing the reference count guarantees that the data remains valid and accessible until the subsystem releases it, preventing future use-after-free bugs.
In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: enable the right set of ciphers The firmware version number check for IGTK introduced in commit c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key") lets the amount of ciphers decrease on every boot of a too old firmware and that is practically happening. It also does not take into account other chips than the wl18xx. On some wl128x, the following can be observed when connecting via nm to a common ap: [ 484.113311] wlcore: WARNING could not set keys [ 484.117828] wlcore: ERROR Could not add or replace key [ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5) [ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142 [ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1 [ 484.145721] wlcore: down [ 484.148986] ieee80211 phy0: Hardware restart was requested [ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142) [ 484.633758] wlcore: Association completed. [ 484.690490] wlcore: ERROR command execute failure 14 [ 484.690490] ------------[ cut here ]------------ [ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892 This repeats endlessly. Always disable IGTK on wl12xx and fix the decrementing mess.
In the Linux kernel, the following vulnerability has been resolved: cxl/fwctl: Fix __fortify_panic Fix a runtime assertion in cxlctl_get_supported_features(). Fortify complains that it is potentially overflowing the entries array per __counted_by_le(num_entries). Quiet the false positive by initializing @num_entries earlier. memcpy: detected buffer overflow: 48 byte write of buffer size 0 WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#7: fwctl/1398 RIP: 0010:__fortify_report+0x50/0xa0 Call Trace: __fortify_panic+0xd/0xf cxlctl_get_supported_features.cold+0x23/0x35 [cxl_core]
In the Linux kernel, the following vulnerability has been resolved: cxl/test: Fix __fortify_panic Fix a runtime assertion in setup_xor_mapping(). Fortify complains that it is potentially overflowing the xormaps array per __counted_by(nr_maps). Quiet the false positive by initializing @nr_maps earlier. memcpy: detected buffer overflow: 32 byte write of buffer size 0 WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#8: modprobe/2728 Call Trace: __fortify_panic+0xd/0xf setup_xor_mapping+0x6c/0xa0 [cxl_translate] [ dj: Fixed up @nr_entries to @nr_maps in commit log. ]
In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: revert ct extension genid infrastructure This infrastructure is not used anymore after moving ct timeout and helper to use datapath refcount to track object use. Revert commit c56716c69ce1 ("netfilter: extensions: introduce extension genid count") this patch disables all ct extensions (leading to NULL) for unconfirmed conntracks, when this is only targeted at ct helper and ct timeout. There is also codebase that dereferences the ct extension without checking for NULL which could lead to crash.
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix NULL pointer dereference in mt7996_init_tx_queues() When MT76_NPU and CONFIG_NET_MEDIATEK_SOC_WED are enabled and mt76 detects properly the Airoha NPU SoC, mt7996_init_tx_queues() will dereference a NULL WED pointer. Fix the issue by always passing the WED pointer from mt7996_dma_init().
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: npc: Fix size of entry2cntr_map KASAN prints below splat. This is caused by allocating counter for reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map is not allocated for reserved entries. BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0 Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14 CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1 Hardware name: Marvell CN106XX board (DT) Workqueue: events work_for_cpu_fn Call trace: dump_backtrace.part.0+0xe4/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x88/0xb4 print_report+0x154/0x458 kasan_report+0xb8/0x194 __asan_store2+0x7c/0xa0 npc_map_mcam_entry_and_cntr+0xb0/0x1a0 rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280 npc_install_flow+0x840/0xfe0 rvu_npc_install_cpt_pass2_entry+0x138/0x190 rvu_nix_init+0x148c/0x2880 rvu_probe+0x1800/0x30b0 local_pci_probe+0x78/0xe0 work_for_cpu_fn+0x30/0x50 process_one_work+0x4cc/0x97c worker_thread+0x360/0x630 kthread+0x1a0/0x1b0 ret_from_fork+0x10/0x20
In the Linux kernel, the following vulnerability has been resolved: MIPS: mm: Fix out-of-bounds write in maar_res_walk() maar_res_walk() uses wi->num_cfg as the index into the fixed-size wi->cfg array, but checks whether the array is full only after it has filled the selected entry. If walk_system_ram_range() reports more than 16 memory ranges, the overflow call writes one struct maar_config past the end of the array before WARN_ON() prevents num_cfg from advancing. Move the full-array check before taking the array slot and return non-zero when the scratch array is full, so walk_system_ram_range() terminates the walk instead of invoking the callback for further ranges.
In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at the 'out:' label, but only calls the matching get_cpu_var() after the 'i < 0' early-return check. When event->hw.idx is negative the function jumps to 'out:' without having taken get_cpu_var(), and the trailing put_cpu_var() then issues an unmatched preempt_enable(), underflowing preempt_count. On a CONFIG_PREEMPT=y kernel preempt_count would underflow and eventually present as a 'scheduling while atomic' BUG. Move put_cpu_var() to pair with get_cpu_var() so the percpu access is correctly bracketed and the 'out:' label only handles perf_pmu_enable.
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix memory leak of bonding resources In a corner case of concurrent driver removal and driver reset, bonding resource is first released in hns_roce_hw_v2_exit() during driver removal, and then is allocated again in hns_roce_register_device() during driver reset. This leads to memory leak because the release timing has already passed. This may also lead to a kernel panic as below because of the leaked notifier callback: Call trace: 0xffffa20fccc04978 (P) raw_notifier_call_chain+0x20/0x38 call_netdevice_notifiers_info+0x60/0xb8 netdev_lower_state_changed+0x4c/0xb8 As Sashiko suggested, the teardown order of bonding resources should be inverted to make sure the resources are released when the driver is removed.
In the Linux kernel, the following vulnerability has been resolved: mfd: cs42l43: Sanity check firmware size Currently the code checks if a firmware was received, however it does not verify that the firmware size is larger than the firmware header. As the firmware pointer is dereferenced as a pointer to the header structure this could lead to an out of bounds memory access. Add the missing check.
In the Linux kernel, the following vulnerability has been resolved: coresight: ete: Always save state on power down System register ETMs and ETE are unlikely to be preserved on CPU power down. The ETE DT binding also never documented "arm,coresight-loses-context-with-cpu" so nobody would have legitimately been able to use that binding to fix it and ACPI has no such binding at all. Fix it by hard coding the setting for sysreg ETMs (ETE is always sysreg) or ACPI boots. Use a local variable when setting up save_state so that it's immune to concurrent probing when devices have different configurations which is an issue with modifying the global. This fixes the following error when using Coresight with ACPI on the FVP which supports CPU PM: coresight ete0: External agent took claim tag WARNING: drivers/hwtracing/coresight/coresight-core.c:248 at coresight_disclaim_device_unlocked+0xe0/0xe8, CPU#0: perf/117
In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability dwc_pcie_rasdes_debugfs_init() returns success when the controller has no RAS DES capability, leaving pci->debugfs->rasdes_info unset. The common debugfs teardown path still calls dwc_pcie_rasdes_debugfs_deinit(), which dereferences rasdes_info unconditionally. Return early when no RAS DES state was allocated. In that case no RAS DES mutex was initialized, so there is nothing to destroy. [mani: reworded subject]
In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/MSI: Unmap MSI-X region on error" This reverts commit 1a8d4c6ecb4c81261bcdf13556abd4a958eca202. Commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") added an iounmap(dev->msix_base) on the error path of msix_capability_init() to release the MSI-X region when msix_setup_interrupts() fails. When msix_setup_interrupts() fails, the call chain is: msix_setup_interrupts() -> __msix_setup_interrupts() struct pci_dev *dev __free(free_msi_irqs) = __dev; ... return ret; // __free cleanup fires on error The __free(free_msi_irqs) cleanup calls pci_free_msi_irqs(), which already handles the unmap: void pci_free_msi_irqs(struct pci_dev *dev) { pci_msi_teardown_msi_irqs(dev); if (dev->msix_base) { iounmap(dev->msix_base); // already unmapped here dev->msix_base = NULL; // and set to NULL } } So dev->msix_base is unmapped and set to NULL before msix_setup_interrupts() returns to msix_capability_init(). The "goto out_unmap" introduced by commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") then calls iounmap() a second time on a NULL pointer. This was reproduced on Intel Emerald Rapids (192 CPUs) while running tools/testing/selftests/kexec/test_kexec_jump.sh: WARNING: CPU#44 at iounmap+0x2a/0xe0 RIP: 0010:iounmap+0x2a/0xe0 RDI: 0000000000000000 Call Trace: msix_capability_init+0x317/0x3f0 __pci_enable_msix_range+0x21d/0x2c0 pci_alloc_irq_vectors_affinity+0xa9/0x130 nvme_setup_io_queues+0x2a8/0x420 [nvme] nvme_reset_work+0x151/0x340 [nvme] ... RDI=0 confirms iounmap() is called with NULL. Restore the original "goto out_disable" and leave the unmap to the existing __free(free_msi_irqs) cleanup.
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid double-unpin of DOORBELL/MMIO BOs on free amdgpu_amdkfd_gpuvm_free_memory_of_gpu() unpinned DOORBELL and MMIO remap BOs (which are pinned at allocation time) before checking whether the BO is still mapped to the GPU. When the BO is still mapped, the function returns -EBUSY and leaves the BO alive, but it has already been unpinned. The BO is then unpinned again when it is finally freed during process teardown, triggering a ttm_bo_unpin() underflow warning: WARNING: CPU: 18 PID: 15066 at ttm/ttm_bo.c:650 amdttm_bo_unpin+0x6d/0x80 [amdttm] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu] RIP: 0010:amdttm_bo_unpin+0x6d/0x80 [amdttm] Call Trace: amdgpu_bo_unpin+0x1a/0x90 [amdgpu] amdgpu_amdkfd_gpuvm_unpin_bo+0x31/0xb0 [amdgpu] amdgpu_amdkfd_gpuvm_free_memory_of_gpu+0x3bf/0x460 [amdgpu] kfd_process_free_outstanding_kfd_bos+0xd4/0x170 [amdgpu] kfd_process_wq_release+0x109/0x1b0 [amdgpu] process_one_work+0x1e2/0x3b0 worker_thread+0x50/0x3a0 kthread+0xdd/0x100 ret_from_fork+0x29/0x50 Move the unpin after the mapped_to_gpu_memory check so it only happens once we are committed to freeing the BO. (cherry picked from commit 927c5b2defb9b09856444d94bebfd056a002bd75)