Linux
Monthly
In the Linux kernel, the following vulnerability has been resolved: smb/server: fix null-ptr-deref in ksmbd_ipc_tree_connect_request() See the procedure below: ksmbd_tree_conn_connect ksmbd_share_config_get share->name = kstrdup() // fail if (!test_share_config_flag(share, KSMBD_SHARE_FLAG_PIPE)) // false // do not check `share->name` ksmbd_ipc_tree_connect_request strlen(share->name) // null-ptr-deref
In the Linux kernel, the following vulnerability has been resolved: smb/server: fix invalid pointer dereference in ksmbd_stop_durable_scavenger() See the procedure below: ksmbd_launch_ksmbd_durable_scavenger durable_scavenger_running = true server_conf.dh_task = kthread_run() // fail, dh_task is an ERR_PTR() server_ctrl_handle_reset ksmbd_stop_durable_scavenger kthread_stop(server_conf.dh_task) // invalid pointer
In the Linux kernel, the following vulnerability has been resolved: smb/server: abort initialization when proc setup fails ksmbd_server_init() calls ksmbd_proc_init() before creating the remaining proc entries and server subsystems. ksmbd_proc_init() tears down partial state on a procfs or percpu_counter allocation failure, but returns void, so ksmbd_server_init() continues as if the counters were usable. Once userspace starts the server, server_ctrl_handle_init() calls ksmbd_proc_reset(), which reaches percpu_counter_set() with a NULL per-CPU counters pointer on SMP systems. The later ksmbd_proc_create() calls also receive a NULL parent and may create entries in the /proc root; ksmbd_proc_cleanup() cannot remove those entries because ksmbd_proc_fs is NULL.
In the Linux kernel, the following vulnerability has been resolved: smb/server: call ksmbd_proc_cleanup() on module init failure When a later initializer fails, the unwind chain releases resources created after procfs and then jumps directly to class_unregister(). Returning an error from module_init() leaves the proc tree and its per-CPU counters allocated.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer publishing granted locks to prevent UAF/double-free race In smb2_lock(), mid-batch granted locks are published to connection-wide (conn->lock_list) and file-wide (fp->lock_list) lists immediately upon vfs_lock_file() success, while also remaining tracked on the stack-local rollback_list. If a subsequent element in the same SMB2_LOCK request array fails validation or execution, the thread jumps to out: and walks rollback_list to undo previously granted locks. However, because the granted lock was already published to conn->lock_list, a concurrent UNLOCK request on the same connection can find the lock object and kfree() it before the rollback loop executes. When the granting thread subsequently walks rollback_list, it dereferences and frees the already-freed ksmbd_lock structure, resulting in a Use-After-Free and Double-Free (on both ksmbd_lock and struct file_lock). Fix this by deferring the publication of granted locks to conn->lock_list and fp->lock_list until after the entire array of lock elements has been processed without error. Mid-batch grants remain tracked exclusively on the request-local rollback_list until the whole batch succeeds, eliminating the race window.
In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced ztailpacking pclusters On-disk sizes of interlaced pclusters should be block-aligned, and ztailpacking interlaced pclusters should be invalid at all. Currently, mkfs.erofs won't generate any interlaced pcluster with ztailpacking enabled, so this doesn't affect any existing valid filesystems. However, crafted images can contain invalid interlaced ztailpacking pclusters, resulting in an out-of-bounds read from a kmap'd page and copying irrelevant kernel memory into userspace-visible page cache.
In the Linux kernel, the following vulnerability has been resolved: lwt_bpf: Restore reserved headroom after xmit program ip_finish_output2() expands an skb to LL_RESERVED_SPACE(dev) before LWT xmit. An LWT_XMIT BPF program can then modify the skb head and still return BPF_OK, so bpf_xmit() rechecks the remaining headroom before the skb continues to neighbour output. That recheck uses dst->dev->hard_header_len. This is not enough for the neighbour cached-header path: neigh_hh_output() copies the cached hardware header using the aligned hh_cache size, HH_DATA_MOD for short headers or HH_DATA_ALIGN(hh_len) otherwise. On Ethernet, hard_header_len is 14 but the cached copy needs 16 bytes. If an LWT_XMIT BPF program calls bpf_skb_change_head(skb, 1, 0), the skb can still have 15 bytes of headroom after the program. The existing check accepts that, after which neigh_hh_output() hits its headroom warning and drops the skb. Use LL_RESERVED_SPACE(dst->dev) in the post-BPF headroom check to match the reservation made before LWT xmit.
In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow bpf_{g,s}etsockopt() in cgroup UNIX getname hooks _bpf_setsockopt() and _bpf_getsockopt() call sock_owned_by_me() for full sockets, so these helpers expect the socket lock to be held. BPF_CGROUP_UNIX_GETPEERNAME and BPF_CGROUP_UNIX_GETSOCKNAME run BPF programs without acquiring the socket lock. A program attached to either hook can therefore trigger the sock_owned_by_me() warning by calling bpf_setsockopt() or bpf_getsockopt(). Disallow bpf_setsockopt() and bpf_getsockopt() for CGROUP_UNIX_GETPEERNAME and CGROUP_UNIX_GETSOCKNAME.
In the Linux kernel, the following vulnerability has been resolved: m68k: nfcon: Do not call console_is_registered() in nfcon_device() Since 7c2af0f634f1 ("tty: tty_io: use console_list_lock for list synchronization") show_cons_active() calls the .device() method under the console_list_lock, but console_is_registered() tries to acquire console_list_lock as well, causing a deadlock. It should not be necessary to check console_is_registered() here since the function should not be called in the fist place when the console is not registered.
In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative optlen in cgroup getsockopt hook A cgroup getsockopt BPF program can shrink ctx->optlen after the kernel getsockopt handler has run. The kernel-buffer variant, used by TCP_ZEROCOPY_RECEIVE, only rejects values larger than the original length. If BPF writes a negative optlen, that value is accepted and propagated back to the TCP getsockopt code. It can then be passed to copy_to_sockptr() as a size_t and trigger the hardened usercopy bytes > INT_MAX warning. Reject negative ctx.optlen in __cgroup_bpf_run_filter_getsockopt_kern(), matching the lower-bound validation already present in the sockptr-based getsockopt hook.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: detach blocked lock requests before freeing A file_lock retained by ksmbd for byte-range lock bookkeeping can still be part of the VFS blocked-request graph. In particular, the VFS can chain a new waiter below an already blocked request through flc_blocked_requests. The ksmbd_file reference count does not cover that graph. Both __ksmbd_close_fd() and the cross-request unlock path free these retained file_lock objects directly. If a dependent waiter is still attached, locks_release_private() hits BUG_ON(!list_empty(&flc->flc_blocked_requests)). The same lifetime mismatch can leave a freed ksmbd_lock reachable through its request-local llist. Detach the file_lock from the blocked-request graph before freeing it in the close, cross-request unlock, and rollback paths. locks_delete_block() also wakes requests chained below the object. Remove llist when a completed lock is published so a globally visible ksmbd_lock no longer points into the submitting worker's stack.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: scope session state changes to bound connections ksmbd_all_conn_set_status() treats every connection whose transient binding flag is set as belonging to the target SessionId. A logoff or session replacement can consequently move an unrelated connection to NEED_RECONNECT or NEED_SETUP. Pass the target session itself and select connections using either the connection-local session xarray or the session's permanent channel list. Use the same association test while waiting for requests to drain. Serialize session-wide status changes under request_lock and do not overwrite EXITING or RELEASING. Protect the shutdown transition with the same lock so a concurrent session update cannot revive a closing connection.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size smb_check_perm_dacl() validates that the DACL fits inside the NT security descriptor, but then bounds its two ACE walks by the remaining NTSD length (acl_size) rather than the DACL's declared size (pdacl_size). When pdacl->size is smaller than the trailing NTSD buffer, bytes after the declared DACL boundary - still inside the stored security descriptor - are parsed as ACEs during access checks. A crafted DACL can place an access-granting ACE beyond pdacl->size, and the current code accepts it during SMB2_CREATE access validation, while parse_dacl() and smb_inherit_dacl() stop at pdacl_size. Bound both ACE walks by pdacl_size to match the DACL boundary semantics used elsewhere in the server. Validation: - semantic KUnit harness shows the post-boundary ACE is selected before the fix and rejected (EACCES) after it - linux master (7.2-rc6), x86_64
In the Linux kernel, the following vulnerability has been resolved: smb/server: fix session leak in ksmbd_session_register() See the procedure below: smb2_sess_setup ksmbd_smb2_session_create __session_create atomic_set(&sess->refcnt, 2) hash_add(sessions_table, &sess->hlist, sess->id) ksmbd_session_register xa_store(&conn->sessions, sess->id, sess) // fail ksmbd_user_session_put atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed Remove the session from sessions_table and drop its table reference if xa_store() fails.
In the Linux kernel, the following vulnerability has been resolved: NFSv4: remove callback IDR entry on client allocation failure nfs4_alloc_client() allocates an NFSv4.0 callback identifier before it finishes setting up the client. If any later initialization step fails, the error path frees the nfs_client directly with nfs_free_client(). That bypasses nfs_put_client(), which is where the callback IDR entry is removed during normal teardown. A failed allocation can therefore leave cb_ident_idr pointing at a freed nfs_client. A later NFSv4.0 callback lookup by cb_ident would find the stale pointer and take a reference to it. Make the callback IDR removal helper callable by the allocation failure path, and remove the callback identifier before freeing the client. This was found by a local static-analysis checker for publish-before-free lifetime bugs and confirmed by manual inspection.
In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Fix device leaks on parse failure bl_parse_concat() and bl_parse_stripe() allocate a child device array and then parse each child in turn. If parsing a child fails, the failed child is not counted in nr_children and the parent may be left with a children array that bl_free_device() will not release when nr_children is zero. Release the failed child and the already parsed children before returning the error. Also make bl_free_device() release the child array whenever the children pointer is set, so that partially initialised concat or stripe devices are cleaned up correctly. bl_parse_scsi() can also fail after assigning d->bdev_file and dropping the file reference. Clear the pointer after fput() so that an outer cleanup path does not put it again.
In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so I/O to a v4.0 flexfiles DS oopses: - nfs4_init_ds_session() dereferences clp->cl_session->session_state while seeding the DS lease. It also only seeds cl_lease_time when NFS4_SESSION_INITING is set; without a session that never happens, so cl_lease_time stays 0 and nfs4_renew_state() busy-loops, requeuing every 5 seconds. Seed the lease whenever there is no session and return before touching session state. - ff_layout_async_handle_error_v4() dereferences clp->cl_session->fc_slot_table on every DS I/O error. Fall back to the v4.0 transport slot table (clp->cl_slot_tbl) when there is no session.
In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease() When nfs4_add_lease() races with a delegation return, it calls nfs4_delete_lease() to clean up. Previously, it passed priv, which can legitimately be NULL. Passing a NULL priv eventually leads to a NULL pointer dereference in generic_setlease().
In the Linux kernel, the following vulnerability has been resolved: clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate() devm_clk_get_optional_enabled_with_rate() registers its cleanup action before setting the clock rate. If setting the rate fails, it attempts to disable and unprepare a clock that was never enabled. This issue was spotted while reviewing "rust: clk: add devres-managed clks" [1]. Register the cleanup action only after successfully preparing and enabling the clock. [1]: https://lore.kernel.org/rust-for-linux/20260706-clk-type-state-v5-3-67c5f326a16c@collabora.com
In the Linux kernel, the following vulnerability has been resolved: bpf, xdp: move offload check into dev_xdp_install() bpf_xdp_link_update() calls dev_xdp_install() directly and skips dev_xdp_attach(), so the checks in dev_xdp_attach() do not run. A user can make an XDP link with a normal program and then swap in an offloaded or device-bound program with BPF_LINK_UPDATE, which puts it on the software path. dev_xdp_install() is the one place all three paths go through: "ip link set xdp" and BPF_LINK_CREATE reach it via dev_xdp_attach(), and BPF_LINK_UPDATE calls it directly. So move the program checks (offloaded, bound to another device, device-bound in generic mode, native vs generic, DEVMAP and CPUMAP) there, and keep only the netlink-flag check (XDP_FLAGS_UPDATE_IF_NOEXIST) in dev_xdp_attach().
In the Linux kernel, the following vulnerability has been resolved: hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed Previously, hinic3_send_one_skb() cached the skb fragment count before calling hinic3_tx_offload(). If hinic3_tx_csum() falls back to skb_checksum_help() for unsupported tunnel packets, the skb may be linearized. Continuing to build the TX descriptor with the stale fragment count leads to a descriptor mismatch, which can trigger out-of-bounds DMA reads or IOMMU faults. Furthermore, the old code ignored the return value of skb_checksum_help(), transmitting corrupted packets with incomplete checksums upon failure. Fix this by: 1. Moving the hinic3_tx_offload() call before calculating 'num_sge' to ensure the correct fragment count is used if the SKB is linearized. 2. Propagating skb_checksum_help() errors and returning HINIC3_TX_OFFLOAD_INVALID to properly drop the skb.
In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL deref in dpll_device_ops() during teardown race When the last owner of a dpll device unregisters while a foreign driver still holds a pin on it via dpll_pin_on_pin_register(), the dpll object stays alive with an empty registration list. A pin notification queued before the unregister (e.g. ice reacting to zl3073x_i2c removal) then walks pin->dpll_refs into dpll_device_ops(), which trips the WARN_ON and dereferences the missing registration. dpll_lock cannot help because the notification work was queued before the unregistering driver took the lock. Treat the empty registration list as a legitimate transient state. Make dpll_priv() and dpll_device_ops() return NULL in that case and make every pin netlink path that resolves a device from a pin skip such dplls. dpll_cmd_pin_get_one() picks a ref with a live registration and returns -ENODEV when there is none, the pin dumpit skips such a pin instead of aborting the dump, dpll_msg_add_pin_dplls() and the frequency, esync, reference sync and phase adjust set paths skip dead refs, and dpll_pin_parent_device_set() validates the parent with dpll_device_get_by_id(). dpll_pin_register() is the last caller that dereferenced the device ops without a check, so move its frequency monitor validation under dpll_lock and tolerate a missing registration there as well. The empty registration list is equivalent to a cleared DPLL_REGISTERED mark, both transitions happen under dpll_lock in dpll_device_register() and dpll_device_unregister(). A pin notification for a pin whose dplls are all gone is now dropped with -ENODEV instead of crashing, all callers in the core ignore that return value. WARNING: drivers/dpll/dpll_core.c:1092 at dpll_device_ops+0x24/0x40, CPU#83: kworker/u576:3/23471 Modules linked in: ... ice ... zl3073x_i2c(-) ... zl3073x ... Workqueue: ice_dpll_wq ice_dpll_pin_notify_work [ice] RIP: 0010:dpll_device_ops+0x24/0x40 Call Trace: <TASK> dpll_cmd_pin_get_one+0x336/0x520 dpll_pin_event_send+0x82/0x140 dpll_pin_on_pin_unregister+0xbb/0x160 ice_dpll_pin_notify_work+0x1bc/0x1f0 [ice] process_one_work+0x19e/0x370 worker_thread+0x1a6/0x310 kthread+0xe4/0x120 ret_from_fork+0x1a1/0x270 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page
In the Linux kernel, the following vulnerability has been resolved: net: kcm: Hold RCU read lock while running BPF parser kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which prevents CPU migration, but does not establish an RCU read-side critical section. Consequently, BPF map operations can trigger WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser program. Hold the RCU read lock while running the program.
In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix resize of the RX ring When a AF_XDP socket is attached, the virtnet_rx_resize should resize the rq->xsk_buffs XSK buffer array. Otherwise, when the size grows, the virtnet_rx_resume() causes a write past the end of the array. This is easily reproducable with ethtool -G ens3 rx 32 ./xdpsock -i eth0 -q 0 -r -z & ethtool -G eth0 rx 256
In the Linux kernel, the following vulnerability has been resolved: ipvs: fix integer overflow in ftp helper port/address parsing ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16 (hport) and into unsigned char (p[]) without checking for overflow. A crafted FTP PASV/EPSV response with an over-long port or address octet wraps the value, so the helper configures the data connection with a truncated port/address. The netfilter conntrack FTP helper had the same defect, fixed in commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16 overflows"). Apply the equivalent fix here: widen the port accumulator to u32 and reject values above 65535, and reject address octets above 255.
In the Linux kernel, the following vulnerability has been resolved: cuse: wait for pending RCU callbacks on module exit Since commit 053fc4f755ad ("fuse: fix UAF in rcu pathwalks"), fuse_conn_put() frees the fuse_conn through call_rcu() rather than synchronously. For cuse, fc->release is cuse_fc_release(), which lives in the cuse module. If the module is removed before the RCU grace period ends, the callback jumps into freed module memory: userspace / module unload | RCU softirq ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ close(/dev/cuse) | cuse_channel_release() | fuse_dev_release() | fuse_conn_put(fch->conn) | call_rcu(delayed_release) ------+---> callback queued | rmmod cuse | cuse_exit() | cuse_channel_destroy() | ... | return | | <module text freed> | | rcu_do_batch() | delayed_release() | fc->release() | -> cuse_fc_release() | ^^^ freed text! The freed module text is unmapped by vfree(), so the jump into the stale callback triggers a page-fault Oops. If the virtual address is subsequently reused, the callback could execute unrelated code (undefined behaviour). Fix this by calling rcu_barrier() in cuse_exit() so that any pending fuse_conn release callback completes before the module is removed.
In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL when its inode allocation fails, but fuse_fill_super_submount() passed the result straight to get_fuse_inode() and decremented fi->nlookup without checking it: root = fuse_iget(sb, parent_fi->nodeid, ...); fi = get_fuse_inode(root); fi->nlookup--; Inside fuse_iget() the inode allocation can fail and return NULL. The submount root takes the iget5_locked() path, whose alloc_inode() can fail under memory pressure (the auto-submount branch can fail the same way in new_inode() or fuse_alloc_submount_lookup()): inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set, &nodeid); if (!inode) return NULL; A NULL root makes get_fuse_inode() a container_of() on NULL and the nlookup decrement a write to a bogus address, oopsing the mount. With CONFIG_KASAN the following null pointer dereference is reported when the root inode allocation of an auto-submount fails (e.g. under memory pressure): ================================================================== BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0 Read of size 8 at addr 00000000000002b0 by task ls/942 CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15 Call Trace: <TASK> fuse_get_tree_submount+0x656/0x8b0 vfs_get_tree+0x48/0x140 fc_mount+0x13/0x50 fuse_dentry_automount+0x7a/0xb0 __traverse_mounts+0xca/0x330 step_into+0x339/0xac0 path_lookupat+0xc5/0x2f0 filename_lookup+0x163/0x2a0 vfs_statx+0xd5/0x200 do_statx+0x83/0xd0 __x64_sys_statx+0xa0/0xc0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x78/0xe2 </TASK> ================================================================== Return -ENOMEM instead; the caller tears down the partially built superblock on error, matching the other error returns in this function.
In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds the EPROTO error from the earlier failed self-connect. This rejection causes the child socket created for r1's connection to never be freed on virtio or hyperv transports; only the VMCI transport implements pending_work to revisit and clean up a rejected socket. For a non-blocking connect(), vsock_connect() may return -EINPROGRESS immediately, and vsock_connect_timeout() can later set sk->sk_err asynchronously. Since no vsock transport ever sets sk_err on a socket while it is in TCP_LISTEN state, checking it in vsock_accept() serves no purpose and only carries forward errors left behind by earlier, unrelated connection attempts on the same socket. Remove the checks so accept() no longer rejects valid incoming connections because of a stale error, which also avoids the resource leak described above.
In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix password encoding bounds check The password PSWD_ENCODINGS parser reads password_obj[elem + pos_values] while copying the supported password encodings from the ACPI package. The outer loop only guarantees that elem is within password_obj_count. The encoding count is bounded by MAX_ENCODINGS_SIZE, but that does not guarantee that the ACPI package contains enough entries for all elem + pos_values accesses. A malformed package can therefore declare a non-zero encoding count without providing enough string objects, causing the parser to read past the ACPI package array and pass an out-of-bounds string pointer and length to hp_convert_hexstr_to_str(). Add the same computed-index bounds check used by the other offset-based package parsing loops before reading password_obj[elem + pos_values].
In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Reject negative power cap writes in hwmon hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a __u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge unsigned value by the division and then stored into the u32 argument. As a result a nonsensical, multi-gigawatt socket power limit is sent to the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being rejected. Reject negative values with -EINVAL before the conversion. Tested with HSMP enabled: CAP=$(dirname $(grep -l amd_hsmp_hwmon \ /sys/class/hwmon/hwmon*/name | head -1))/power1_cap # negative write echo -1000000 > $CAP ; echo "ret=$?" # valid positive write must still work echo 400000000 > $CAP ; echo "ret=$?" Before: # echo -1000000 > $CAP ; echo "ret=$?" ret=0 <- accepted; bogus limit sent to SMU # echo 400000000 > $CAP ; echo "ret=$?" ret=0 After: # echo -1000000 > $CAP ; echo "ret=$?" bash: echo: write error: Invalid argument ret=1 <- rejected with -EINVAL # echo 400000000 > $CAP ; echo "ret=$?" ret=0 <- valid write still works
In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/* causes use-afer-free crash when either alloc_percpu() or dev_addr_init() in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure") added ref_tracker_dir_exit() to only free_netdev() path.
In the Linux kernel, the following vulnerability has been resolved: ntfs: fix kmap_local_page() usage in compress Several compressed I/O paths discard the address returned by kmap_local_page() and later access or unmap the page using page_address(). This is invalid for highmem pages, and local mappings must also be unmapped using the address returned by kmap_local_page(). Map each destination page in ntfs_decompress() only while producing the current sub-block. Use memcpy_from_page(), memcpy_to_page(), and memzero_page() for the other page accesses. Remove unnecessary local mappings from ntfs_write_cb(), where pages are accessed through the vmap() mapping.
In the Linux kernel, the following vulnerability has been resolved: ntfs: Fix index_root heap OOB write in ntfs_ir_to_ib() ntfs_ir_to_ib copies all entries from index_root into a freshly allocated index_block_size-byte buffer without verifying that the entries fit in the available space. The entries in index_root may be larger than the usable entry space in the index block. This can cause OOB writes past the end of the allocation. The validator ntfs_index_root_inconsistent() checks that entries are self-consistent within the IR value, but never cross-checks them against index_block_size. There is no bounds check in ntfs_ir_to_ib() before the memcpy. Fixing this at the sink in ntfs_ir_to_ib() since ntfs_index_root_inconsistent() validates the logical consistency of index_root as a structure and a root with large entries is a structurally valid root. The bug is a size conflict of ntfs_ir_to_ib(). Also, the validator is called once per inode load in ntfs_read_locked_inode() while ntfs_ir_to_ib() is only called during a reparent, a check there adds no overhead to the common path. Moreover, even a future call path that bypasses the validator would still be protected. With NULL as first parameter of ntfs_error(), the volume error flag is never set by this call, so the device name will be absent from the error message. In any case, that the caller, ntfs_ir_reparent(), prints an error message that includes the device name on NULL returns. I think this is the best solution available without adding 'struct super_block *sb' as a parameter to ntfs_ir_to_ib(). This heap out-of-bounds write is triggered by a crafted filesystem image, which is not in the kernel threat model, anyway, fixing memory errors would be nice to keep things secure.
In the Linux kernel, the following vulnerability has been resolved: ntfs: reject unprivileged writes to reserved $LX* xattrs Reject setxattr of the reserved $LXUID, $LXGID, $LXMOD and $LXDEV names from userspace unless the caller has CAP_SYS_ADMIN.
In the Linux kernel, the following vulnerability has been resolved: ntfs: serialize resident iomap reads with mrec_lock ntfs_read_iomap_begin_resident() walks the MFT record through ntfs_attr_lookup() -> ntfs_attr_find() without taking ni->mrec_lock, while ntfs_attr_record_resize(), ntfs_make_room_for_attr() and ntfs_resident_attr_record_add() memmove() the same base_ni->mrec buffer under that lock. map_mft_record() only takes a reference and does not serialize, so the reader can observe torn attribute length and offset fields while a writer is relocating the records. KCSAN reports the race between the mmap read fault path and both link() and unlink(): BUG: KCSAN: data-race in ntfs_attr_find / ntfs_attr_record_resize write to 0xffff888100af1018 of 4 bytes by task 96 on cpu 1: ntfs_attr_record_resize+0xd2/0x130 ntfs_attr_record_rm+0xad/0x530 ntfs_delete+0x224/0x640 ntfs_unlink+0x14d/0x280 vfs_unlink+0x157/0x520 read to 0xffff888100af1018 of 4 bytes by task 95 on cpu 0: ntfs_attr_find+0x104/0x5b0 ntfs_attr_lookup+0x39c/0x10c0 ntfs_read_iomap_begin_resident+0xc6/0x230 ntfs_read_iomap_begin+0x5d/0xa0 iomap_iter+0x2e2/0x6e0 iomap_read_folio+0x147/0x2a0 ntfs_read_folio+0x108/0x170 filemap_read_folio+0x35/0x100 filemap_fault+0x993/0x1000 value changed: 0x00000250 -> 0x000001f0 The address is mrec + 0x18, i.e. mft_record.bytes_in_use, and the change is the 96 bytes of one $FILE_NAME attribute being removed. Keep base_ni->mrec_lock from the resident read iomap lookup through iomap_end(). This protects both the attribute walk and the subsequent copy from iomap->inline_data, which points into the MFT record. The non-resident path is left alone: ntfs_lookup() already holds the directory inode's mrec_lock when it reads an index folio through read_mapping_folio(), and taking the lock in the shared wrapper deadlocks there with recursive locking on mrec_lock. The comment above the read_mapping_folio() call in fs/ntfs/dir.c notes the same hazard. The seek path uses the same lookup helper but does not dereference iomap->inline_data. Release the lock before returning from that path, whereas the regular read path records base_ni in iomap->private and releases the lock from its iomap_end() callback. Tested with a reproducer that faults in a 16-byte resident file while another thread runs link()/unlink() on it. Before: 40 KCSAN reports in about one second. After: no reports in 180 seconds over 206,090 read iterations and 423,540 link/unlink cycles. A PROVE_LOCKING build shows no lockdep splat with the same reproducer running for 60 seconds.
In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix cleanup after worker creation failure vdpasim_create() leaves vdpasim->worker as an ERR_PTR when kthread_run_worker() fails. The error path then drops the device reference, which releases the partially initialized simulator. vdpasim_free() unconditionally passes the worker pointer to kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger a general protection fault. Store the worker error, clear the pointer, and only clean up the worker when it was successfully initialized. Also make the release path tolerate partially initialized objects by guarding virtqueue and IOTLB cleanup, since the same release path can be reached from other initialization failures. I found this bug myself, though the patch was written with AI assistance.
In the Linux kernel, the following vulnerability has been resolved: virtio_balloon: quiesce balloon work before device shutdown Commit 8bd2fa086a04 ("virtio: break and reset virtio devices on device_shutdown()") added a generic virtio bus .shutdown handler that breaks and resets every virtio device during device_shutdown(), i.e. on reboot and kexec. virtio_balloon provides no .shutdown of its own, so that generic path runs while the balloon's asynchronous work is still armed. Once the device has been broken, virtqueue_add_inbuf() in virtballoon_free_page_report() returns -EIO and trips its WARN_ON_ONCE(). On a kernel booted with panic_on_warn that turns an ordinary reboot, for example a kexec based upgrade, into a fatal panic in the middle of device_shutdown(), so the machine never reaches the new kernel. Relaxing that single WARN_ON_ONCE() would only hide the symptom: the inflate/deflate and OOM paths do not warn, they call wait_event(vb->acked, ...) and would instead block forever on a broken queue that can no longer complete. The device has to be quiesced, not just kept quiet. Add a .shutdown handler that quiesces the balloon via the shared virtballoon_quiesce() helper while the device is still alive, and only then breaks and resets it via virtio_device_shutdown(). Unlike virtballoon_remove() the balloon workqueue is not destroyed, as shutdown does not free the device and cancel_work_sync() together with stop_update already prevent any further work from being queued.
In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: fix wrong list iterated in add_direct_chain error path In add_direct_chain(), newly allocated direct MR entries are added to the local list 'tmp', which is spliced into mr->head only on success. On the error path, the cleanup loop was incorrectly iterating over mr->head instead of tmp. Fix by iterating over 'tmp' in the err_alloc cleanup path.
In the Linux kernel, the following vulnerability has been resolved: virtio: rtc: time out alarm requests RTC class operations run with rtc_device.ops_lock held. The virtio RTC alarm requests currently wait without a timeout for the device to return their requestq buffers. On surprise removal, virtio-pci marks the virtqueues broken before unregistering the virtio device. If an alarm request is waiting when the device stops responding, viortc_remove() blocks in viortc_class_stop() while trying to acquire ops_lock. The request cannot complete and device removal hangs until the waiting task is signalled. Use the same 60-second timeout as clock read requests for alarm reads, alarm programming, and alarm interrupt enable requests. The existing message reference counting keeps a timed-out request alive until a late response or device teardown.
In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers the CLKOUT clock provider with of_clk_add_provider(), but nothing ever unwinds it: there is no of_clk_del_provider() call and the driver has no remove callback. Each of_clk_add_provider() allocates a struct of_clk_provider, takes a reference on the OF node and adds an entry to the global of_clk_providers list, none of which is released when the device is unbound. Every bind/unbind (or module reload) therefore leaks a provider structure and an of_node reference. The clock itself is already device-managed (devm_clk_register()); only the provider registration was not. Use devm_of_clk_add_hw_provider() so the provider is removed automatically on unbind. Tie it to the parent i2c device, whose OF node carries the #clock-cells and clock-output-names properties (the RTC class device has no OF node of its own).
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix request buffer leak in smb2_new_read_req() smb2_new_read_req() allocates the request buffer with smb2_plain_req_init() but only publishes it to the caller with *buf = req at the very end of the function. Two error returns sit in between: rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server, (void **) &req, total_len); if (rc) return rc; if (server == NULL) return -ECONNABORTED; [...] rdata->mr = smbd_register_mr(server->smbd_conn, &rdata->subreq.io_iter, true, need_invalidate); if (!rdata->mr) return -EAGAIN; On either of them the buffer is neither released nor handed back, so it is leaked. The caller cannot clean up after it: smb2_async_readv() does 'goto out' on a non-zero return, which skips the cifs_small_buf_release(buf) at async_readv_out, and buf has not been assigned at that point in any case. The write path has never had this problem. smb2_async_writev() registers the memory region inline and jumps to its release label instead of returning: wdata->mr = smbd_register_mr(...); if (!wdata->mr) { rc = -EAGAIN; goto async_writev_out; } Commit b7972092199f ("cifs: smbd: Retry on memory registration failure") changed both sides from -ENOBUFS to -EAGAIN in a single patch, which puts the two shapes next to each other. Only the -EAGAIN return is reachable in practice, because smb2_plain_req_init() calls smb2_reconnect() first and that already fails with -EIO when server is NULL, before anything is allocated. Both returns are given the same treatment here rather than leaving one of them correct only by accident. Because -EAGAIN is a replayable error, the failure also reaches the retry block at the end of smb2_async_readv(), which marks the subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be retried rather than ending the I/O, and every attempt that reaches it leaks another buffer. smb2_should_replay() short-circuits on tcon->retry, so on a hard mount the attempt count is not bounded by the retrans setting. Only the asynchronous read path is affected. The synchronous SMB2_read() caller passes rdata == NULL and the memory registration block is guarded on rdata. The memory registration failure path was pointed out by the Sashiko AI reviewer while it was reviewing an unrelated patch to smb2_async_readv().
In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-rzg2l: Fix loss of interrupt rzg2l_clear_irq_int() and rzg2l_clear_tint_int() perform a read-modify-write on the ISCR/TSCR status registers to clear the bit for the interrupt just handled. Since these registers are write-0-to-clear per bit, this is racy: If another interrupt's status bit gets set between the read and the write, that bit is written back as 0 by the software-constructed value, clearing an interrupt that hasn't been serviced yet and losing it. This can be reproduced by triggering multiple interrupts at once, e.g.: gpioset -c gpiochip0 355=0 353=0 328=0 352=0 Fix this by writing back only the bit being cleared, with all other bits set to 1, instead of read-modify-writing the whole register. Since 1-bits are left unchanged by hardware, concurrently-set status bits for other interrupts are preserved.
In the Linux kernel, the following vulnerability has been resolved: irqchip/ast2700-intc: Avoid allocating in the irq_domain activate() callback The interrupt core calls the irq_domain_activate() callback from __setup_irq() with desc->lock held and interrupts disabled. Both aspeed_intc1_irq_domain_activate() and aspeed_intc0_resolve_route() test a compatible string with fwnode_device_is_compatible(). fwnode_device_is_compatible() invokes fwnode_property_match_string(), which allocates with GFP_KERNEL. That's obviously not possible with interrupts disabled and a raw spinlock held. Both call sites are only ever handed OF nodes, so use of_device_is_compatible() instead: it walks the property in place and does not allocate.
In the Linux kernel, the following vulnerability has been resolved: clk: visconti: Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. visconti_clk_register_gate() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents.
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Clear per-CPU IRS data on teardown IRS affinity setup publishes an IRS pointer and IAFFID state in the per-CPU data before the remaining IRS initialization can fail. The error path then frees the IRS data without clearing that published state, leaving CPUs associated with freed memory. On initialization failure and normal IRS teardown, clear the per-CPU IRS association by removing the stale pointer to irs_data. Also invalidate the per-CPU IAFFID state for any CPUs that were tied to the IRS before it was freed.
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Check get_logical_index() return value in MADT IAFFID parsing In gic_acpi_parse_iaffid() a given MADT GICC entry might not correspond to a logical cpu recognized by the kernel, resulting in the cpu variable initialization to an error value. Currently, the get_logical_index() return value is not checked for failure, which might result in out-of-bounds memory corruption while trying to index a per_cpu variable array. Add a check to evaluate get_logical_index() return value.
In the Linux kernel, the following vulnerability has been resolved: ALSA: ice1712: Fix the card leak at probe error with the auto-cleanup snd_ice1712_probe() performs multiple initialization steps after snd_card_new(), but directly returns on failures from later steps without releasing the ALSA card, causing resource leaks when probing fails. Use snd_devm_card_new() together with scope-based cleanup via __free(snd_card_unref), and clear the card pointer after successful registration to keep it alive.
In the Linux kernel, the following vulnerability has been resolved: ntfs: fix off-by-one page overflow in ntfs_decompress() The per-token range check in ntfs_decompress() uses if (cb >= cb_sb_end || dp_addr > dp_sb_end) break; so dp_addr == dp_sb_end falls through to the symbol copy `*dp_addr++ = *cb++`, writing one byte past the destination page. Since NTFS_SB_SIZE == PAGE_SIZE the destination is a single page, so the byte lands in the adjacent page, and *dest_ofs is left one past the sub-block end (the later `*dest_ofs &= ~PAGE_MASK` then yields 1, not 0, so the page is never finalized and later sub-blocks keep writing further past it). A corrupted compressed $DATA attribute thus produces a bounded run of out-of-bounds writes when the file is read. Break as soon as dp_addr reaches dp_sb_end; a full sub-block still completes, as its final copy advances dp_addr to exactly dp_sb_end.
In the Linux kernel, the following vulnerability has been resolved: ntfs: validate usa_ofs before preserving the update sequence number When ntfs_mft_record_alloc() reuses a free mft record it reads the old update sequence number straight from the on-disk record: usn = *(__le16 *)((u8 *)m + le16_to_cpu(m->usa_ofs)); Here m points into the raw $MFT page-cache folio, which still holds unvalidated, MST-protected bytes: the folio is read by a plain iomap_read_folio() and neither post_read_mst_fixup() nor ntfs_mft_record_check() has run on it (both work on private copies). m->usa_ofs is therefore an untrusted u16, and a corrupted record can put it past the end of the record so the two-byte read lands outside the folio. Reading such a record while creating a file gives, under KASAN: BUG: KASAN: use-after-free in ntfs_mft_record_alloc+... Read of size 2 at addr ... ntfs_mft_record_alloc -> __ntfs_create -> ntfs_create -> path_openat Only preserve the old update sequence number when usa_ofs is even and in range, mirroring the check ntfs_mft_record_check() already applies; otherwise leave usn zero, which the existing restore below skips.
In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms chip->timer while holding chip->spinlock and accesses the card-private mtpav state. snd_mtpav_free() currently takes the same lock and calls timer_delete() when the timer is active. This only removes a pending timer; it does not wait for a callback that is already running and does not prevent the callback from rearming the timer. A callback running on another CPU can therefore continue after snd_mtpav_free() releases the lock and access the card-private state while the card is being torn down. It can also rearm the timer after timer_delete() has returned. Call timer_shutdown_sync() without holding chip->spinlock. This waits for any running callback to finish and prevents further rearming before the card-private mtpav state is released.
In the Linux kernel, the following vulnerability has been resolved: xsk: fix NULL pointer dereference in __xsk_rcv() In the __xsk_rcv() multi-buffer path, xsk_buff_alloc() is called in a loop without checking its return value. xsk_buff_can_alloc() only counts fill queue entries without validating their addresses, so it can succeed while xsk_buff_alloc() rejects all remaining entries and returns NULL. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__xsk_rcv+0x426/0xc20 (net/xdp/xsk.c:350) Call Trace: xsk_generic_rcv+0x26d/0x5f0 xdp_do_generic_redirect+0x3c5/0xcf0 do_xdp_generic+0x92f/0xe70 __netif_receive_skb_core.constprop.0+0xf7e/0x2b30 Fix this with a two-stage transaction. First allocate and stage all buffers required for the packet, recycling all staged buffers with xsk_buff_free() if any allocation fails. Only after this stage succeeds, copy the data, reserve the RX descriptors, and release the buffers in an error-free loop.
In the Linux kernel, the following vulnerability has been resolved: net: bridge: Reject descending VLAN tunnel ranges A pair of descending VLAN and tunnel IDs can pass the tunnel range span check. The VLAN subtraction produces a negative int, which is converted to unsigned when compared with the u32 tunnel ID subtraction. It can therefore equal the wrapped tunnel ID delta. The range loop then performs no iterations. Since the batched notification handling added a post-loop error check, this leaves err uninitialized and makes the request's return value unpredictable. Reject descending VLAN ranges before comparing the spans. Valid ascending and single-entry ranges remain unchanged, while malformed descending ranges consistently return -EINVAL. This issue was found by a static analysis checker and confirmed by manual source review.
In the Linux kernel, the following vulnerability has been resolved: netdevsim: update queue NAPI association on queue reset In netdevsim, receive queues (struct nsim_rq) embed their own struct napi_struct. When queue reset is performed (e.g. via queue_reset debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq, and nsim_queue_mem_free() later deletes and frees the old one. However, nsim_queue_start() failed to update the queue-to-NAPI mapping via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to point to the old NAPI struct. After the old queue was freed, a subsequent queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN slab-use-after-free read in nla_put_napi_id() when accessing rxq->napi->napi_id. Fix this by calling netif_queue_set_napi() in nsim_queue_start() to associate the new NAPI with the RX queue, and clear the association with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown.
In the Linux kernel, the following vulnerability has been resolved: net: qlcnic: validate unified ROM sections before loading The unified ROM parser reads directory, product, and data-descriptor fields from the firmware file. Existing validation forms table and data ends with unchecked additions and multiplications. Malformed values can wrap before they are compared with the firmware size. The parser also dereferences typed pointers at firmware-controlled offsets. Valid descriptor extents alone are insufficient for the consumers. The loader reads a fixed-size bootloader regardless of its declared size, the version parser assumes a 17-byte tail, and a partial final firmware word is read as a full u64. A truncated image can therefore make the driver read beyond the firmware allocation during validation or loading. Replace the pointer-returning parser with bounded range helpers. Validate table entry sizes, descriptor indices, section ranges, the fixed bootloader load length, and the version tail before exposing any section. Read all file fields with unaligned little-endian accessors and assemble a partial final word from only the bytes that remain. Apply the same range checks to the legacy image before reading its fixed fields.
In the Linux kernel, the following vulnerability has been resolved: ip6mr: do not clone dst in ip6mr_cache_report() IPv6 input attaches a non-refcounted (NOREF) dst to skbs under RCU. When an ingress multicast packet misses MFC lookup, ip6mr_cache_unresolved() places the skb onto the unresolved queue, escaping the receive-side RCU grace period. If the underlying route is deleted and freed, and the MFC queue is later resolved with a wrong parent interface, ip6_mr_forward() invokes ip6mr_cache_report(..., MRT6MSG_WRONGMIF), which executes dst_clone(skb_dst(pkt)) on the freed dst entry, triggering a slab use-after-free. Report packets queued to mroute6_sk (a raw socket) and netlink notifications do not require an attached dst entry. Fix this by: 1. Removing dst_clone() in ip6mr_cache_report() and ensuring report skbs do not hold a dst. 2. Dropping skb_dst before queuing unresolved skbs in ip6mr_cache_unresolved(), matching the fact that multicast forwarding resolves outgoing routes anew via ip6_route_output().
In the Linux kernel, the following vulnerability has been resolved: inetpeer: randomize RB-tree node comparison using SipHash The inetpeer rate limiting system stores peer entries in a Red-Black tree keyed deterministically on the remote IP address. Because tree lookups walk the RB-tree using standard lexicographical comparisons (inetpeer_addr_cmp), an off-path adversary can predict the exact topology of the tree and the sequence of nodes traversed during lookups (the gc_stack candidate list). By combining deterministic tree traversal with aggressive garbage collection (triggered when tree size exceeds inet_peer_threshold), an attacker can selectively force the eviction of targeted inet_peer nodes. When an evicted node is subsequently re-created upon receiving a new packet, its rate-limiting token bucket (rate_tokens, rate_last) is reset to full capacity. This creates a side-channel primitive allowing off-path attackers to bypass IP-keyed ICMP rate limits and infer open UDP ports (similar to SAD DNS style attacks). Mitigate this by randomizing the RB-tree node comparison logic using SipHash with a secret key (inetpeer_hash_key) initialized via net_get_random_once(). Nodes are ordered in the tree by SipHash(addr, key) rather than raw IP addresses. Because the secret key is unknown to external entities, the tree layout and lookup traversal paths are unpredictable to off-path adversaries, breaking the deterministic eviction gadget. Cache the computed 64-bit SipHash (hash) in struct inet_peer and compute the target hash (dhash) once at the beginning of inet_getpeer() to avoid recomputing SipHash at every step of the RB-tree walk.
In the Linux kernel, the following vulnerability has been resolved: net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the current backlog plus the packet length fits within the queue limit: sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ) gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ) sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo) sch->qstats.backlog + skb->len <= q->limit (plug) sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len are unsigned int, so all sums are computed in 32 bits and wrap at 2^32. Once the true backlog exceeds 4 GiB the wrapped sum becomes small and admission keeps succeeding, so the queue grows without bound and the kernel can be driven to OOM. Promote the sums to u64 so admission stops once the true backlog exceeds the limit. The limit is u32, so the bounded queue stays below 2^32 and the stored u32 backlog never wraps. The bug can only be reproduced as root (albeit with ridiculous setup): attach a gred (or bfifo/plug) qdisc with a limit near 4 GiB, leaving the default VQ unconfigured (for gred), and drive >4 GiB of queued traffic (e.g. via a size table / stab to inflate qdisc_pkt_len, or sustained high-rate traffic). The u32 backlog+len sum wraps at 2^32, admission keeps succeeding, and the queue grows unboundedly to OOM.
In the Linux kernel, the following vulnerability has been resolved: net/smc: free stashed qentry before overwrite in REQ_ADD_LINK to ADD_LINK transition When smc_llc_event_handler() transitions the local LLC flow from SMC_LLC_FLOW_REQ_ADD_LINK to SMC_LLC_FLOW_ADD_LINK on arrival of an ADD_LINK request, it calls smc_llc_flow_qentry_set() unconditionally: if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_REQ_ADD_LINK) { lgr->llc_flow_lcl.type = SMC_LLC_FLOW_ADD_LINK; smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, qentry); ... } A CONFIRM_LINK or ADD_LINK_CONT arriving while flow->type is SMC_LLC_FLOW_REQ_ADD_LINK is stashed into flow->qentry via the SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT handler (which stores into flow->qentry for any non-NONE flow type). When the subsequent ADD_LINK arrives, the REQ_ADD_LINK branch overwrites flow->qentry with the new pointer without first freeing the stashed allocation, leaking one kmalloc object. The stashed entry has no consumer: smc_llc_wait() is only called from llc_add_link_work, which is not yet scheduled while the flow type remains REQ_ADD_LINK. No waiter is sleeping on llc_msg_waiter at this point. It is safe to unconditionally free any stashed qentry before the overwrite. Call smc_llc_flow_qentry_del() before smc_llc_flow_qentry_set() in the REQ_ADD_LINK branch. smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the normal path where no entry is stashed is a no-op.
In the Linux kernel, the following vulnerability has been resolved: net/smc: free pending qentry in smc_llc_flow_stop() before memset smc_llc_flow_stop() resets a flow struct with a blind memset: spin_lock_bh(&lgr->llc_flow_lock); memset(flow, 0, sizeof(*flow)); flow->type = SMC_LLC_FLOW_NONE; spin_unlock_bh(&lgr->llc_flow_lock); If flow->qentry is non-NULL at this point the pointer is overwritten without the allocation being freed, leaking one kmalloc object. A late-arriving duplicate CONFIRM_LINK or ADD_LINK_CONT message can set flow->qentry after the legitimate message has been consumed by the waiter via smc_llc_flow_qentry_clr() (which NULLs the pointer but leaves flow->type non-zero) but before the flow completes and smc_llc_flow_stop() runs. In that window the duplicate is stashed into flow->qentry, and then lost when smc_llc_flow_stop() zeros the struct. Call smc_llc_flow_qentry_del() inside the lock before the memset. smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the normal case where no entry is pending is a no-op.
In the Linux kernel, the following vulnerability has been resolved: net: bridge: arp/nd proxy: fix reading neigh ha Currently neigh ha address is read directly, but that can result in torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot to take a stable snapshot of the address.
In the Linux kernel, the following vulnerability has been resolved: vxlan: fix reading neigh ha Currently arp/neigh_reduce read neigh ha directly which can lead to partial reads while the neigh is being updated. Use neigh_ha_snapshot to take a stable snapshot of the address similar to route_shortcircuit which already does the right thing.
In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: zero referring call lists before decoding decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so each referring_call_list starts uninitialized. decode_rc_list() assigns rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero referring calls therefore leaves the pointer uninitialized, and nfs4_callback_sequence() later passes stale slab contents to kfree(). Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is NULL from the beginning, including valid empty referring call lists.
In the Linux kernel, the following vulnerability has been resolved: NFSv4.2: fix LAYOUTSTATS send buffer exhaustion encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE), i.e. 256 bytes, for the layoutupdate4 body written by the layout driver. The flexfiles record can exceed that. ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4, an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4 and the bool add a further 144, so the body passes 256 bytes before the netaddr4 is encoded at all. encode_layoutstats() additionally writes the deviceid4 and the layoutupdate4 lou_type word, neither of which the macro accounts for. The filehandle and the address are both chosen by the server, through LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the end of the send buffer. xdr_reserve_space() returns NULL once that happens, and the two ff_layout_encode_io_latency() calls run with dss_info->mirror->lock held, so a NULL return there leaves the lock permanently held. Raise PNFS_LAYOUTSTATS_MAXSIZE to 384 so that the record fits inside the reservation.
In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: key the data server cache on the NFS version nfs4_pnfs_ds_add() keys the per-net data server cache on the multipath address set alone, and struct nfs4_pnfs_ds records no version. That suffices for the files layout driver, which always connects with version 4, but flexfiles takes its version tuple from GETDEVICEINFO per device, and one address can legitimately serve both NFSv3 and NFSv4. Two deviceids on one address with different ds_versions[0].version therefore share a single nfs4_pnfs_ds, and whichever mirror connects first pins ds_clp to its own version. The other one is handed that client anyway, so it selects rpc_call_ops for a version the connection does not speak, and the mismatched sequence-slot handling dereferences NULL. Add the version to the cache key so the two cannot alias, giving each version its own nfs4_pnfs_ds and connection while both mirrors stay usable. Only the major version is compared, since that is what selects rpc_call_ops and rpc_ops; v4.0 and v4.1 keep sharing a client. The files layout driver passes the 4 it already hardcodes at connect time.
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix call to hardware monitoring event handler The first parameter of hwmon_notify_event() is supposed to be the hardware monitoring device. The bnxt driver calls it with the platform device as first parameter instead. This API break results in undefined behavior and may result in a crash. Pass the hardware monitoring device as parameter instead to fix the problem.
In the Linux kernel, the following vulnerability has been resolved: ptp: netc: fix period truncation and potential divide-by-zero in PEROUT The max_period bound in net_timer_enable_perout() was computed as: max_period = (u64)NETC_TMR_DEFAULT_FIPER + integral_period; which exceeds U32_MAX when integral_period > 0 (e.g. 0x100000002 for the default 333333333 Hz clock). A period_ns that passes this check but exceeds U32_MAX is then silently truncated when stored into the u32 struct netc_pp::period field. A truncated value of zero can reach netc_timer_set_perout_alarm(), where the local u32 period variable would also be 0, causing a divide-by-zero in roundup_u64(delta, period) whenever the stime < min_time branch is taken (which always happens for a start time of {0, 0}). Additionally, netc_timer_enable_periodic_pulse() and netc_timer_enable_fiper() both compute: fiper = pp->period - integral_period; A zero pp->period results in an unsigned wraparound to 0xFFFFFFFD, mis-programming the FIPER hardware register. Fix all three issues by capping max_period at NETC_TMR_DEFAULT_FIPER (0xFFFFFFFF). This ensures that any period_ns passing the range check fits in a u32 without truncation, so the stored value is always valid and non-zero. The accepted range is reduced by integral_period ns (typically only a few nanoseconds), which is negligible in practice.
In the Linux kernel, the following vulnerability has been resolved: net/sched: account classifier filter allocations to memcg Allocations in the tc classifier *_change() paths (filter objects, per-CPU counters, and per-filter aux data) use plain GFP_KERNEL without __GFP_ACCOUNT, allowing unprivileged users to pin kernel memory outside memcg charging. The shared tcf_exts_init_ex() action array allocation in cls_api.c was also uncharged; this patch closes it along with the per-classifier filter-object/percpu/aux allocations that remain unaccounted. Add GFP_KERNEL_ACCOUNT to: - the shared tcf_exts_init_ex() action array (cls_api.c), common to every filter of every classifier (32 pointers, 256 bytes); - the filter-object, per-CPU-counter, and per-filter aux allocations in cls_basic, cls_bpf, cls_cgroup, cls_flow, cls_flower, cls_fw, cls_matchall, cls_route and cls_u32; - the u32_init_knode() replace-path knode allocation (cls_u32.c), which allocates the same struct tc_u_knode + sel.keys on every replace of an existing knode and was missed by the create-path-only conversion. Also fix the cls_basic error path: basic_change() inserts fnew into the IDR before allocating the per-CPU counter. If alloc_percpu() fails the errout path kfree'd fnew without idr_remove, leaving a dangling pointer in the IDR. With GFP_KERNEL_ACCOUNT the percpu alloc becomes failable on demand (memcg at memory.max), making the dead path attacker-reachable and burning the handle permanently. Add the idr_remove on the percpu failure path, matching the basic_set_parms failure-path pattern. Note: vega@nebusec.ai provided a poc for basic_cls, but it was easy to extend to the other classifiers. Conditions to recreate the bug: - CONFIG_NET_SCHED, CONFIG_NET_CLS_* (the classifier being used), CONFIG_NET_CLS_ACT, CONFIG_MEMCG, CONFIG_USER_NS, CONFIG_NET_NS. - Unprivileged user in a fresh user+network namespace (unshare -Urn), or root with CAP_NET_ADMIN. - Create a large number of tc filters (e.g. tc filter add dev lo ingress ... <classifier> ...) while watching a memcg-limited cgroup: system slab grows far faster than memory.current, pinning kernel memory outside memcg charging.
In the Linux kernel, the following vulnerability has been resolved: net: sparx5: fix sleep in atomic context in MAC table access sparx5_set_rx_mode() runs with netif_addr_lock_bh held and iterates dev->mc via __dev_mc_sync(), which per address calls sparx5_mc_sync() / sparx5_mc_unsync() -> sparx5_mact_learn() / sparx5_mact_forget(). These take sparx5->lock, a mutex, and then poll the MAC access command register with readx_poll_timeout(). A mutex may block, which is not allowed from atomic context. Convert the driver to the new .ndo_set_rx_mode_async callback introduced in commit 3554b4345d85 ("net: introduce ndo_set_rx_mode_async and netdev_rx_mode_work"). The async callback is invoked from process context, so the mutex and sleeping completion poll can remain. Observed with CONFIG_PROVE_LOCKING, CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 217, name: ip preempt_count: 201, expected: 0 Call trace: __might_resched+0x144/0x248 __might_sleep+0x48/0x7c __mutex_lock+0x74/0x850 mutex_lock_nested+0x24/0x30 sparx5_mact_learn+0x78/0x100 sparx5_mc_sync+0x40/0x54 __hw_addr_sync_dev+0xc4/0x170 sparx5_set_rx_mode+0x4c/0x58 __dev_set_rx_mode+0x64/0xa4 __dev_open+0x1ec/0x26c
In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Skip VMBus module cleanup for non-nested root partition The VMBus module initialization function, hv_acpi_init(), currently does nothing when running in the root partition and root is not nested in another VM. But the initialization function reports success, so the VMBus module is indeed loaded. VMBus functionality is not actually needed, but the VMBus module must be loaded so that hv_vmbus_exists() can answer correctly. Furthermore, the mshv_root dependency on the VMBus module is needed as described in the commit message for 840b740a35bf ("mshv: Add conditional VMBus dependency"). Loading the VMBus module without actually initializing it causes failures if the module should later be unloaded. The module unload code tries to clean up things that were never initialized, resulting in memory faults and a panic. Fix this by having VMBus module exit function perform the same check for non-nested root partition, and do nothing in such a case, just like hv_acpi_init(). In the long run, the code that manages the Hyper-V provided SynIC should be refactored to better coordinate the requirements of root partition scenarios and normal VM scenarios, and to hopefully remove the hv_vmbus_exists() dependnecy between mshv_root and VMBus modules. Preventing the current unload failure scenario is an expediency until such a refactoring is done.
In the Linux kernel, the following vulnerability has been resolved: fuse: invalidate the correct range after O_APPEND direct write fuse_direct_write_iter() captures pos before generic_write_checks(), which moves ki_pos to EOF for O_APPEND writes: fuse_direct_write_iter() { pos = iocb->ki_pos; /* 0 (user-supplied) */ generic_write_checks(); /* ki_pos -> EOF */ fuse_direct_io(); /* writes at EOF, correct */ invalidate(pos, pos + res); /* [0, res) -- wrong */ } The post-write invalidation targets a stale range instead of the actual written range at EOF. This can cause data inconsistency when the file size is not page-aligned. The tail page straddling EOF has a valid portion before EOF that concurrent readers can fault back in during the DIO write window: Tail page (file size X not page-aligned): page_start X (EOF) page_end |--- valid data ----|-- stale --| CPU0 (O_APPEND DIO writer) CPU1 (buffered reader) -------------------------- ---------------------- invalidate [X, X+len) tail page evicted FUSE_WRITE in flight ... read [page_start, X) tail page re-faulted [X, page_end) = stale FUSE_WRITE completes i_size = X + len invalidate [0, len) <- WRONG tail page still cached read [X, X+len) hits stale tail page returns old data Fix by reading pos back from iocb->ki_pos after generic_write_checks(), as generic_file_direct_write() does. Also fix a typo in the comment ("may have" -> "may have competed").
In the Linux kernel, the following vulnerability has been resolved: fuse: Fix the condition to enable over-io-uring The existing condition in fuse_uring_cmd() is there only to avoid disabling io-uring for connections that already run with it, missing was a condition to refuse any IORING_OP_URING_CMD if the connection/channel didn't get enabled because of missing FUSE_INIT reply flag FUSE_OVER_IO_URING. Without the reply flag the barrier in fuse_uring_ready() doesn't work and IO could already be going on and cause deadlock states (at a minimum one between fch->bg_lock and queue->lock). The change itself is trivial, but brings behavior change, FUSE_OVER_IO_URING has to be set in the FUSE_INIT_REPLY by fuse servers to accept any IORING_OP_URING_CMD. Libfuse does that and the only non-libfuse implementation I found (fractal-fuse) also does it. Qemu patches for fuse-io-uring are not merged yet, as far as I know. Moved up is the smp_load_acquire(&fch->initialized) check, as a fuse-server implementation might try to setup io-uring before FUSE_INIT is processed and might have gotten -EOPNOTSUPP instead of -EAGAIN. Also fixed is a stale comment that explains the handling of the FUSE_OVER_IO_URING flag in early RFC versions. If there should be a report from any library or application we probably need to revert this commit.
In the Linux kernel, the following vulnerability has been resolved: arm64: process: Fix context switching MTE store-only tag check SCTLR_EL1.TCSO0 is set when user opt-in for MTE store-only tag check mode. However, it is not part of SCTLR_USER_MASK which imply that on context switch we never clear SCTLR_EL1.TCSO0, so we are leaking that setting into another task. Fix that by including SCTLR_EL1_TCSO0_MASK into SCTLR_USER_MASK
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: access chan->conn safely in get/setsockopt Since commit b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") l2cap_chan::conn has held reference and remains non-NULL also after the corresponding hci_conn is deleted. In this state accessing various fields eg. hci_conn::hdev is invalid, which leads to KASAN crash in l2cap_sock_setsockopt() access of conn->hcon->hdev. Check l2cap_chan::conn.hcon corresponds to an alive hci_conn before trying to use it in l2cap_sock.c. Hold l2cap_chan_lock() in getsockopt/setsockopt to ensure it stays alive, and to avoid data races in l2cap_chan fields.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN New sk should not be added to parent socket accept queue after last l2cap_sock_cleanup_listen() has run in l2cap_sock_teardown_cb() and state set to BT_CLOSED, as that can result to UAF on dereferencing the dangling parent reference. l2cap_sock_new_connection_cb() may race with parent l2cap_chan teardown, due to chan->state accessed without consistent locking: [Task 1] [Task 2] l2cap_sock_release(parent) l2cap_connect l2cap_sock_shutdown pchan = l2cap_global_chan_by_psm l2cap_chan_lock(pchan) l2cap_chan_close l2cap_sock_teardown_cb pchan->state = BT_CLOSED l2cap_chan_unlock(pchan) ------> l2cap_chan_lock(pchan) l2cap_new_connection l2cap_sock_new_connection_cb l2cap_chan_lock(pchan) <-------- l2cap_chan_unlock(pchan) l2cap_sock_kill(parent) /* bt_sk(sk)->parent dangling */ Fix by adding check for sk_state == BT_LISTEN after acquiring sk lock in l2cap_sock_new_connection_cb(). Add lock_sock() around sk_state writes where missing, to avoid data races. Although the data races on pchan->state should be fixed too, this defensive sk_state check probably makes sense in any case.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix race l2cap_sock_cleanup_listen() vs. put_chan For L2CAP sockets without owning sk->sk_socket, reading l2cap_pi(sk)->chan may race against concurrent l2cap_sock_kill() -> l2cap_sock_put_chan(). This excludes simultaneous proto_ops callbacks, but access in l2cap_sock_cleanup_listen() has unsafe lockless read. [Task 1] [Task 2 (hdev->workqueue)] l2cap_sock_release(parent) l2cap_disconn_cfm l2cap_sock_cleanup_listen l2cap_conn_del bt_accept_dequeue l2cap_chan_del lock_sock(sk) l2cap_sock_teardown_cb bt_accept_unlink bt_sk(sk)->parent = NULL release_sock(sk) ----------------> lock_sock(sk) parent = /* NULL */ lock_sock(sk) <--------------------- release_sock(sk) sock_set_flag(sk, SOCK_ZAPPED) l2cap_sock_close_cb l2cap_sock_kill(sk) l2cap_sock_put_chan chan = READ l2cap_pi(sk)->chan l2cap_pi(sk)->chan = NULL l2cap_chan_hold_unless_zero l2cap_put_chan(chan) kref_get_unless_zero(&chan->ref) Task 1 may observe NULL which causes null-ptr-deref. Fix the race by taking lock_sock() in l2cap_sock_kill() to synchronize with l2cap_sock_cleanup_listen(). hold_unless_zero() is not needed here, l2cap_pi(sk)->chan owns reference if it is non-NULL. Clarify code comments vs. locking.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: Fix out-of-bounds DMA read in the TX path btmtksdio_tx_packet() rounds the transfer size up to the SDIO block size of 256 bytes, but hands the host controller the SKB buffer as is: err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data, round_up(skb->len, MTK_SDIO_BLOCK_SIZE)); Only skb->len bytes hold packet data, so the controller reads up to 255 bytes of uninitialised memory and sends it to the device over the SDIO bus. Depending on how much tailroom slack the SKB allocation happens to carry, that read can also extend past the end of the buffer. Compute the padded length up front, ensure the SKB has tailroom for it, and zero-fill the padding with skb_put_zero(). skb->len then covers the padding, so sdio_writesb() no longer needs to round up. byte_tx keeps counting the header and the payload only, and the error path restores the SKB so that the caller can requeue it. Writing behind skb->tail is only safe because the driver owns the buffer, which "Bluetooth: btmtksdio: Take exclusive ownership of the SKB before TX" ensures.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Validate the FW dump header length nxp_process_fw_dump() pulls the ACL header off the frame and then reads seq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data, without checking that the ACL payload is long enough to contain it. h4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the number of payload bytes named in that header, so skb->len is 4 + dlen with dlen supplied by the controller and possibly smaller than the 8 byte dump header, or zero. A short frame with connection handle 0xfff therefore reads both fields from beyond the received data. Beyond the read itself, buf_len is what terminates a dump: a value of zero makes the driver call hci_devcd_complete() and reset the controller, so a truncated frame can end a dump early. Use skb_pull_data() to validate and pull the FW dump header before accessing its fields. Warn and reject the chunk if the header is truncated.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop rfcomm_apply_pn() accepts the MTU value from a remote PN (Parameter Negotiation) frame without checking for zero. When the remote peer sends an MTU of zero, d->mtu is set to 0. This causes the sendmsg path to enter an infinite loop when fragmenting data, as each fragment has size == min_t(size_t, len, 0) == 0, so the remaining length never decreases. The infinite allocation of zero-length skbs exhausts all system memory. Fix by clamping d->mtu to RFCOMM_DEFAULT_MTU when the negotiated value is zero, consistent with the initial value assigned in rfcomm_dlc_alloc().
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: do not leak an hci_conn when a second LE connect is rejected create_le_conn_complete() decides whether the failed connection is still pending by comparing it against hci_lookup_le_connect(), which returns the first LE connection in BT_CONNECT. That is the same connection only while at most one is pending. Two can be pending. Connections created on the passive scan path sit in BT_CONNECT with HCI_CONN_SCANNING set and are invisible to hci_lookup_le_connect() until hci_le_create_conn_sync() clears the flag when their command is issued, so the -EBUSY guard in hci_connect_le() does not prevent a second connection from being queued while the first is still on the scan path. Whenever two connections are in BT_CONNECT at once, the lookup may return one connection while create_le_conn_complete() is reporting the failure of the other; the early exit then drops the error and hci_conn_failed() never runs on the connection that failed. The controller also rejects a second HCI_OP_LE_CREATE_CONN issued while another connection creation is still outstanding, per Core Spec Vol 4, Part E. The spec calls for Command Disallowed there; the bcm43438 observed here answers with an LMP/LL error code instead, which bt_to_errno() maps to the -EPROTO (-71) in the log below. The leaked connection stays in BT_CONNECT forever, and because hci_connect_le() refuses to dial while hci_lookup_le_connect() finds anything, every subsequent attempt to reach any peer fails with -EBUSY and no command reaches the controller at all. Seen on a bcm43438 with two BLE peers polled on the same interval (state 5 is BT_CONNECT; both handles are UNSET ones, allocated from the ida above HCI_CONN_HANDLE_MAX): Bluetooth: hci1: Opcode 0x2013 failed: -71 # hcitool con < LE 14:9C:EF:03:68:81 handle 3840 state 5 lm CENTRAL < LE C4:D3:6A:8C:B5:38 handle 3841 state 5 lm CENTRAL A btmon capture across the next ten minutes of connect attempts contains no HCI_OP_LE_CREATE_CONN at all; outgoing LE connections do not recover until the adapter is reset. With this change the same scenario fails the rejected connection cleanly and further connects to both peers go through. Ask about the connection itself instead of about the device.
In the Linux kernel, the following vulnerability has been resolved: xsk: honor XDP_TX_METADATA in zero-copy path The zero-copy path reads TX metadata whenever the UMEM has metadata space, even if the descriptor does not set XDP_TX_METADATA. Pass descriptor options through the metadata helpers and ignore metadata unless the option is set. This does not fix the existing per-WQE metadata handling for mlx5 MPWQEs. Only the descriptor that starts a session passes through xsk_tx_metadata_request() and configures offload state shared by the batch. Metadata on descriptors joining an open session is therefore not validated and does not configure its requested offloads. In addition, a non-NULL metadata pointer from such a descriptor is treated as a timestamp completion request even when XDP_TXMD_FLAGS_TIMESTAMP is not set, so its metadata union can be overwritten with an unrequested timestamp. Fixing mixed metadata states within one MPWQE requires a separate change.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix NULL deref in NIX TM tree debugfs read path rvu_dbg_nix_tm_tree_display() dereferences pfvf->sq_ctx without checking whether the SQ context has been allocated. Reading /sys/kernel/debug/octeontx2/nix/tm_tree for a NIX LF whose transmit queues are not set up triggers a kernel oops. Guard the read path the same way rvu_dbg_nix_tm_tree_write() already does and return -EINVAL with a seq_file message when sq_ctx is NULL.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-vf: fix workqueue and netdev race in probe/remove Initialize the VF workqueue before register_netdev() so ndo_set_rx_mode does not queue work on a NULL workqueue. Unregister the netdev before destroying the workqueue, and add proper probe error cleanup.
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Only operate on Ethernet frames act_ife encapsulates/decapsulates the original Ethernet header and uses skb->dev->hard_header_len as the length of that header. That is only correct for Ethernet devices: on a device where hard_header_len does not match the L2 header that was actually pulled (PPP reports PPP_HDRLEN while nothing is stripped on ingress), the ingress skb_push()/skb_pull() use the wrong length and can hit skb_under_panic when headroom is tight. IFE is Ethernet-only by design - it builds an outer ethhdr, rewrites h_source/h_dest/h_proto, and calls eth_type_trans() on decode - so instead of trying to make the offsets work for arbitrary link types, simply drop packets that do not carry an Ethernet header. Checking skb->dev->type alone is not enough. We have to cater for a corner case where mirred can redirect an skb from a non-Ethernet device to an Ethernet one, and skb->dev then says nothing about the framing the skb actually has: an skb redirected from ppp0 reaches the target's ingress hook with mac_len 0 and no Ethernet header at all. So at ingress also require mac_len to be ETH_HLEN. On egress mac_len is not maintained, so the device type is all we have; a bogus redirect there yields a malformed frame rather than an out-of-bounds push, and it would be malformed with or without IFE. That corner case is not theoretical - redirecting from ppp0 into a veth that has an ife encode action on its ingress hook panics without this patch: skbuff: skb_under_panic: len:98 put:14 head:ffff88800e410000 data:ffff88800e40fff5 tail:0x57 end:0x640 dev:veth3 kernel BUG at net/core/skbuff.c:214! Call Trace: skb_push (net/core/skbuff.c:224 net/core/skbuff.c:2657) tcf_ife_act (net/sched/act_ife.c:829 net/sched/act_ife.c:874) tc_run (net/core/dev.c:4463) netif_receive_skb (net/core/dev.c:6463 net/core/dev.c:6522) tcf_mirred_to_dev (net/sched/act_mirred.c:248 net/sched/act_mirred.c:328) tcf_mirred_act (net/sched/act_mirred.c:489) tc_run (net/core/dev.c:4463) process_backlog (net/core/dev.c:6728) With Ethernet framing guaranteed, use ETH_HLEN instead of hard_header_len.
In the Linux kernel, the following vulnerability has been resolved: net: mana: Cap MSI-X vectors to the device MSI-X table size mana_gd_query_max_resources() sizes gc->num_msix_usable from resp.max_msix and the CPU count, but never from the device MSI-X table. On a 1792 vCPU M-series VM that yields 1793 while the table has 1024 entries, and mana_gd_setup_remaining_irqs() then walks indices 1..1792, running off the end of the region mapped by msix_map_region(): BUG: unable to handle page fault for address: ff8e347f8b99800c RIP: 0010:msix_prepare_msi_desc+0x7a/0x90 RAX: 0000000000004000 RBX: ff4330cb164ea780 RCX: ff8e347f8b998000 Call Trace: <TASK> __msi_domain_alloc_irqs+0x13a/0x440 msi_domain_alloc_irq_at+0x149/0x1b0 mana_gd_setup+0x351/0x890 mana_gd_probe+0x274/0x390 </TASK> RAX is index 1024 * PCI_MSIX_ENTRY_SIZE, one entry past the table. msi_insert_desc() does range check the index, but only against the MSI domain hwsize, which matches the table only for devices on an MSI parent domain. With a global PCI/MSI domain hwsize is MSI_XA_DOMAIN_SIZE, so nothing bounds the request. Cap num_msix_usable with pci_msix_vec_count().
In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in rds_cong_map_updated() rds_cong_map_updated() runs after a peer's congestion map has been rewritten (by rds_tcp_cong_recv() and rds_ib_cong_recv(), or the clear-all in the loopback and IB send-completion paths). It bumps rds_cong_generation and then checks waitqueue_active() on map->m_waitq and on rds_poll_waitq to decide whether anyone needs waking. atomic_inc() carries no ordering and waitqueue_active() is a plain load, so nothing orders the map and generation stores before the wait queue reads. The waiters do the mirror image: rds_cong_wait() adds itself to m_waitq and then tests the port bit, and rds_poll() registers on rds_poll_waitq and then reads the generation. That is the store-buffering pattern described above waitqueue_active() in include/linux/wait.h - the updater can observe an empty wait queue while the waiter still observes the port as congested, and no wake-up is issued. rds_cong_wait() is an interruptible sleep with no timeout, so a sender blocked on a congested port stays blocked until the next congestion update from that peer arrives or a signal is delivered. A poll() waiter misses the map-updated notification the same way. Use wq_has_sleeper(), which is waitqueue_active() preceded by the required full barrier, as rds_tcp_state_change() already does for the same pattern.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix NULL deref of af_xdp_zc_qidx on rep setup af_xdp_zc_qidx tracks receive queues using AF_XDP zero-copy and is allocated during PF/VF probe. Representors and other non-AF_XDP paths leave the pointer NULL, but several call sites used test_bit() on it unconditionally. Switching to devlink eswitch mode creates representors and runs otx2_init_hw_resources(), which reaches otx2_pool_aq_init() and oopses when dereferencing the NULL bitmap. Add NULL checks before every af_xdp_zc_qidx test_bit() use in the RSS, ethtool, XSK, and pool init paths.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix cn20k mailbox lifetime on repeated rvu_mbox_init() rvu_mbox_init() is called separately for AF-PF mailboxes during probe and for AF-VF mailboxes when SR-IOV is enabled. Each call used to allocate a new ng_rvu object, leaking the first allocation when the pointer was overwritten on the second call. Sharing one ng_rvu across both paths exposed several teardown bugs: the error path freed all cn20k mailbox DMA and kfree()d ng_rvu even when only the failing init type should be unwound, leaving live AF-PF mailbox memory in use after an AF-VF init failure. mutex_init() was also re-run on the AF-VF path while AF-PF mailbox handlers could still hold rvu->mbox_lock. Probe and SR-IOV failure paths did not release cn20k mailbox DMA either, since cleanup only happened in rvu_remove(). Allocate ng_rvu once with devm_kzalloc(), initialize mbox_lock in the same block, unwind only the mailbox memory for the failing init type, and free cn20k mailbox DMA from the probe and pci_enable_sriov() error paths.
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: fix length calculations and avoid invalid header warnings syzbot reported a warning in skb_network_header_len() triggered by tcf_skbmod_act(): !skb_transport_header_was_set(skb) WARNING: CPU: 0 PID: 14949 at include/linux/skbuff.h:3243 skb_network_header_len include/linux/skbuff.h:3243 [inline] WARNING: CPU: 0 PID: 14949 at net/sched/act_skbmod.c:55 tcf_skbmod_act+0xfe8/0x1810 net/sched/act_skbmod.c:55 There are a few issues in tcf_skbmod_act(): 1. Calling skb_network_header_len() assumes skb->transport_header is set, which is not guaranteed when tcf_skbmod_act() runs at TC ingress. 2. Unconditionally calling skb_mac_header_len() at the beginning of tcf_skbmod_act() triggers a warning on L3 devices (e.g. TUN) where the MAC header is unset, evaluating to an underflowed garbage length. 3. On TC ingress, skb->data points to the network header. Adding the MAC header length to the IP header length causes skb_ensure_writable() to request more bytes than the actual IP packet length, dropping valid short packets (e.g. 28-byte UDP/IPv4 packets). Fix these by: - Using skb_network_offset(skb) + sizeof(struct iphdr/ipv6hdr) for SKBMOD_F_ECN so that the required length is correctly calculated on both ingress (offset == 0) and egress (offset == mac_len). - Setting max_edit_len to ETH_HLEN for Ethernet header modifications after validating ARPHRD_ETHER.
In the Linux kernel, the following vulnerability has been resolved: net: fix a resource leak in copy_net_ns() error handling path Currently, preinit_net() does two things: (1) call ns_common_init() which might fail (2) initialize resources which does not fail However, preinit_net() is returning early when (1) fails, and copy_net_ns() is jumping to the dec_ucounts: label. As a result, resources allocated by net_alloc() are leaking. We need to call key_remove_domain() and net_passive_dec() in order to release resources allocated by net_alloc(). We cannot simply jump to the put_userns: label when preinit_net() failed, for (2) is not yet done. But we can reorder (1) and (2), for there is no dependency between (1) and (2). Therefore, this patch decouples (1) from preinit_net() and changes preinit_net() back to a void function, and calls ns_common_init() after preinit_net() succeeded. Then, we can jump to immediately after ns_common_free() of the put_userns: label.
In the Linux kernel, the following vulnerability has been resolved: smb/server: fix null-ptr-deref in ksmbd_ipc_tree_connect_request() See the procedure below: ksmbd_tree_conn_connect ksmbd_share_config_get share->name = kstrdup() // fail if (!test_share_config_flag(share, KSMBD_SHARE_FLAG_PIPE)) // false // do not check `share->name` ksmbd_ipc_tree_connect_request strlen(share->name) // null-ptr-deref
In the Linux kernel, the following vulnerability has been resolved: smb/server: fix invalid pointer dereference in ksmbd_stop_durable_scavenger() See the procedure below: ksmbd_launch_ksmbd_durable_scavenger durable_scavenger_running = true server_conf.dh_task = kthread_run() // fail, dh_task is an ERR_PTR() server_ctrl_handle_reset ksmbd_stop_durable_scavenger kthread_stop(server_conf.dh_task) // invalid pointer
In the Linux kernel, the following vulnerability has been resolved: smb/server: abort initialization when proc setup fails ksmbd_server_init() calls ksmbd_proc_init() before creating the remaining proc entries and server subsystems. ksmbd_proc_init() tears down partial state on a procfs or percpu_counter allocation failure, but returns void, so ksmbd_server_init() continues as if the counters were usable. Once userspace starts the server, server_ctrl_handle_init() calls ksmbd_proc_reset(), which reaches percpu_counter_set() with a NULL per-CPU counters pointer on SMP systems. The later ksmbd_proc_create() calls also receive a NULL parent and may create entries in the /proc root; ksmbd_proc_cleanup() cannot remove those entries because ksmbd_proc_fs is NULL.
In the Linux kernel, the following vulnerability has been resolved: smb/server: call ksmbd_proc_cleanup() on module init failure When a later initializer fails, the unwind chain releases resources created after procfs and then jumps directly to class_unregister(). Returning an error from module_init() leaves the proc tree and its per-CPU counters allocated.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer publishing granted locks to prevent UAF/double-free race In smb2_lock(), mid-batch granted locks are published to connection-wide (conn->lock_list) and file-wide (fp->lock_list) lists immediately upon vfs_lock_file() success, while also remaining tracked on the stack-local rollback_list. If a subsequent element in the same SMB2_LOCK request array fails validation or execution, the thread jumps to out: and walks rollback_list to undo previously granted locks. However, because the granted lock was already published to conn->lock_list, a concurrent UNLOCK request on the same connection can find the lock object and kfree() it before the rollback loop executes. When the granting thread subsequently walks rollback_list, it dereferences and frees the already-freed ksmbd_lock structure, resulting in a Use-After-Free and Double-Free (on both ksmbd_lock and struct file_lock). Fix this by deferring the publication of granted locks to conn->lock_list and fp->lock_list until after the entire array of lock elements has been processed without error. Mid-batch grants remain tracked exclusively on the request-local rollback_list until the whole batch succeeds, eliminating the race window.
In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced ztailpacking pclusters On-disk sizes of interlaced pclusters should be block-aligned, and ztailpacking interlaced pclusters should be invalid at all. Currently, mkfs.erofs won't generate any interlaced pcluster with ztailpacking enabled, so this doesn't affect any existing valid filesystems. However, crafted images can contain invalid interlaced ztailpacking pclusters, resulting in an out-of-bounds read from a kmap'd page and copying irrelevant kernel memory into userspace-visible page cache.
In the Linux kernel, the following vulnerability has been resolved: lwt_bpf: Restore reserved headroom after xmit program ip_finish_output2() expands an skb to LL_RESERVED_SPACE(dev) before LWT xmit. An LWT_XMIT BPF program can then modify the skb head and still return BPF_OK, so bpf_xmit() rechecks the remaining headroom before the skb continues to neighbour output. That recheck uses dst->dev->hard_header_len. This is not enough for the neighbour cached-header path: neigh_hh_output() copies the cached hardware header using the aligned hh_cache size, HH_DATA_MOD for short headers or HH_DATA_ALIGN(hh_len) otherwise. On Ethernet, hard_header_len is 14 but the cached copy needs 16 bytes. If an LWT_XMIT BPF program calls bpf_skb_change_head(skb, 1, 0), the skb can still have 15 bytes of headroom after the program. The existing check accepts that, after which neigh_hh_output() hits its headroom warning and drops the skb. Use LL_RESERVED_SPACE(dst->dev) in the post-BPF headroom check to match the reservation made before LWT xmit.
In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow bpf_{g,s}etsockopt() in cgroup UNIX getname hooks _bpf_setsockopt() and _bpf_getsockopt() call sock_owned_by_me() for full sockets, so these helpers expect the socket lock to be held. BPF_CGROUP_UNIX_GETPEERNAME and BPF_CGROUP_UNIX_GETSOCKNAME run BPF programs without acquiring the socket lock. A program attached to either hook can therefore trigger the sock_owned_by_me() warning by calling bpf_setsockopt() or bpf_getsockopt(). Disallow bpf_setsockopt() and bpf_getsockopt() for CGROUP_UNIX_GETPEERNAME and CGROUP_UNIX_GETSOCKNAME.
In the Linux kernel, the following vulnerability has been resolved: m68k: nfcon: Do not call console_is_registered() in nfcon_device() Since 7c2af0f634f1 ("tty: tty_io: use console_list_lock for list synchronization") show_cons_active() calls the .device() method under the console_list_lock, but console_is_registered() tries to acquire console_list_lock as well, causing a deadlock. It should not be necessary to check console_is_registered() here since the function should not be called in the fist place when the console is not registered.
In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative optlen in cgroup getsockopt hook A cgroup getsockopt BPF program can shrink ctx->optlen after the kernel getsockopt handler has run. The kernel-buffer variant, used by TCP_ZEROCOPY_RECEIVE, only rejects values larger than the original length. If BPF writes a negative optlen, that value is accepted and propagated back to the TCP getsockopt code. It can then be passed to copy_to_sockptr() as a size_t and trigger the hardened usercopy bytes > INT_MAX warning. Reject negative ctx.optlen in __cgroup_bpf_run_filter_getsockopt_kern(), matching the lower-bound validation already present in the sockptr-based getsockopt hook.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: detach blocked lock requests before freeing A file_lock retained by ksmbd for byte-range lock bookkeeping can still be part of the VFS blocked-request graph. In particular, the VFS can chain a new waiter below an already blocked request through flc_blocked_requests. The ksmbd_file reference count does not cover that graph. Both __ksmbd_close_fd() and the cross-request unlock path free these retained file_lock objects directly. If a dependent waiter is still attached, locks_release_private() hits BUG_ON(!list_empty(&flc->flc_blocked_requests)). The same lifetime mismatch can leave a freed ksmbd_lock reachable through its request-local llist. Detach the file_lock from the blocked-request graph before freeing it in the close, cross-request unlock, and rollback paths. locks_delete_block() also wakes requests chained below the object. Remove llist when a completed lock is published so a globally visible ksmbd_lock no longer points into the submitting worker's stack.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: scope session state changes to bound connections ksmbd_all_conn_set_status() treats every connection whose transient binding flag is set as belonging to the target SessionId. A logoff or session replacement can consequently move an unrelated connection to NEED_RECONNECT or NEED_SETUP. Pass the target session itself and select connections using either the connection-local session xarray or the session's permanent channel list. Use the same association test while waiting for requests to drain. Serialize session-wide status changes under request_lock and do not overwrite EXITING or RELEASING. Protect the shutdown transition with the same lock so a concurrent session update cannot revive a closing connection.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size smb_check_perm_dacl() validates that the DACL fits inside the NT security descriptor, but then bounds its two ACE walks by the remaining NTSD length (acl_size) rather than the DACL's declared size (pdacl_size). When pdacl->size is smaller than the trailing NTSD buffer, bytes after the declared DACL boundary - still inside the stored security descriptor - are parsed as ACEs during access checks. A crafted DACL can place an access-granting ACE beyond pdacl->size, and the current code accepts it during SMB2_CREATE access validation, while parse_dacl() and smb_inherit_dacl() stop at pdacl_size. Bound both ACE walks by pdacl_size to match the DACL boundary semantics used elsewhere in the server. Validation: - semantic KUnit harness shows the post-boundary ACE is selected before the fix and rejected (EACCES) after it - linux master (7.2-rc6), x86_64
In the Linux kernel, the following vulnerability has been resolved: smb/server: fix session leak in ksmbd_session_register() See the procedure below: smb2_sess_setup ksmbd_smb2_session_create __session_create atomic_set(&sess->refcnt, 2) hash_add(sessions_table, &sess->hlist, sess->id) ksmbd_session_register xa_store(&conn->sessions, sess->id, sess) // fail ksmbd_user_session_put atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed Remove the session from sessions_table and drop its table reference if xa_store() fails.
In the Linux kernel, the following vulnerability has been resolved: NFSv4: remove callback IDR entry on client allocation failure nfs4_alloc_client() allocates an NFSv4.0 callback identifier before it finishes setting up the client. If any later initialization step fails, the error path frees the nfs_client directly with nfs_free_client(). That bypasses nfs_put_client(), which is where the callback IDR entry is removed during normal teardown. A failed allocation can therefore leave cb_ident_idr pointing at a freed nfs_client. A later NFSv4.0 callback lookup by cb_ident would find the stale pointer and take a reference to it. Make the callback IDR removal helper callable by the allocation failure path, and remove the callback identifier before freeing the client. This was found by a local static-analysis checker for publish-before-free lifetime bugs and confirmed by manual inspection.
In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Fix device leaks on parse failure bl_parse_concat() and bl_parse_stripe() allocate a child device array and then parse each child in turn. If parsing a child fails, the failed child is not counted in nr_children and the parent may be left with a children array that bl_free_device() will not release when nr_children is zero. Release the failed child and the already parsed children before returning the error. Also make bl_free_device() release the child array whenever the children pointer is set, so that partially initialised concat or stripe devices are cleaned up correctly. bl_parse_scsi() can also fail after assigning d->bdev_file and dropping the file reference. Clear the pointer after fput() so that an outer cleanup path does not put it again.
In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so I/O to a v4.0 flexfiles DS oopses: - nfs4_init_ds_session() dereferences clp->cl_session->session_state while seeding the DS lease. It also only seeds cl_lease_time when NFS4_SESSION_INITING is set; without a session that never happens, so cl_lease_time stays 0 and nfs4_renew_state() busy-loops, requeuing every 5 seconds. Seed the lease whenever there is no session and return before touching session state. - ff_layout_async_handle_error_v4() dereferences clp->cl_session->fc_slot_table on every DS I/O error. Fall back to the v4.0 transport slot table (clp->cl_slot_tbl) when there is no session.
In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease() When nfs4_add_lease() races with a delegation return, it calls nfs4_delete_lease() to clean up. Previously, it passed priv, which can legitimately be NULL. Passing a NULL priv eventually leads to a NULL pointer dereference in generic_setlease().
In the Linux kernel, the following vulnerability has been resolved: clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate() devm_clk_get_optional_enabled_with_rate() registers its cleanup action before setting the clock rate. If setting the rate fails, it attempts to disable and unprepare a clock that was never enabled. This issue was spotted while reviewing "rust: clk: add devres-managed clks" [1]. Register the cleanup action only after successfully preparing and enabling the clock. [1]: https://lore.kernel.org/rust-for-linux/20260706-clk-type-state-v5-3-67c5f326a16c@collabora.com
In the Linux kernel, the following vulnerability has been resolved: bpf, xdp: move offload check into dev_xdp_install() bpf_xdp_link_update() calls dev_xdp_install() directly and skips dev_xdp_attach(), so the checks in dev_xdp_attach() do not run. A user can make an XDP link with a normal program and then swap in an offloaded or device-bound program with BPF_LINK_UPDATE, which puts it on the software path. dev_xdp_install() is the one place all three paths go through: "ip link set xdp" and BPF_LINK_CREATE reach it via dev_xdp_attach(), and BPF_LINK_UPDATE calls it directly. So move the program checks (offloaded, bound to another device, device-bound in generic mode, native vs generic, DEVMAP and CPUMAP) there, and keep only the netlink-flag check (XDP_FLAGS_UPDATE_IF_NOEXIST) in dev_xdp_attach().
In the Linux kernel, the following vulnerability has been resolved: hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed Previously, hinic3_send_one_skb() cached the skb fragment count before calling hinic3_tx_offload(). If hinic3_tx_csum() falls back to skb_checksum_help() for unsupported tunnel packets, the skb may be linearized. Continuing to build the TX descriptor with the stale fragment count leads to a descriptor mismatch, which can trigger out-of-bounds DMA reads or IOMMU faults. Furthermore, the old code ignored the return value of skb_checksum_help(), transmitting corrupted packets with incomplete checksums upon failure. Fix this by: 1. Moving the hinic3_tx_offload() call before calculating 'num_sge' to ensure the correct fragment count is used if the SKB is linearized. 2. Propagating skb_checksum_help() errors and returning HINIC3_TX_OFFLOAD_INVALID to properly drop the skb.
In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL deref in dpll_device_ops() during teardown race When the last owner of a dpll device unregisters while a foreign driver still holds a pin on it via dpll_pin_on_pin_register(), the dpll object stays alive with an empty registration list. A pin notification queued before the unregister (e.g. ice reacting to zl3073x_i2c removal) then walks pin->dpll_refs into dpll_device_ops(), which trips the WARN_ON and dereferences the missing registration. dpll_lock cannot help because the notification work was queued before the unregistering driver took the lock. Treat the empty registration list as a legitimate transient state. Make dpll_priv() and dpll_device_ops() return NULL in that case and make every pin netlink path that resolves a device from a pin skip such dplls. dpll_cmd_pin_get_one() picks a ref with a live registration and returns -ENODEV when there is none, the pin dumpit skips such a pin instead of aborting the dump, dpll_msg_add_pin_dplls() and the frequency, esync, reference sync and phase adjust set paths skip dead refs, and dpll_pin_parent_device_set() validates the parent with dpll_device_get_by_id(). dpll_pin_register() is the last caller that dereferenced the device ops without a check, so move its frequency monitor validation under dpll_lock and tolerate a missing registration there as well. The empty registration list is equivalent to a cleared DPLL_REGISTERED mark, both transitions happen under dpll_lock in dpll_device_register() and dpll_device_unregister(). A pin notification for a pin whose dplls are all gone is now dropped with -ENODEV instead of crashing, all callers in the core ignore that return value. WARNING: drivers/dpll/dpll_core.c:1092 at dpll_device_ops+0x24/0x40, CPU#83: kworker/u576:3/23471 Modules linked in: ... ice ... zl3073x_i2c(-) ... zl3073x ... Workqueue: ice_dpll_wq ice_dpll_pin_notify_work [ice] RIP: 0010:dpll_device_ops+0x24/0x40 Call Trace: <TASK> dpll_cmd_pin_get_one+0x336/0x520 dpll_pin_event_send+0x82/0x140 dpll_pin_on_pin_unregister+0xbb/0x160 ice_dpll_pin_notify_work+0x1bc/0x1f0 [ice] process_one_work+0x19e/0x370 worker_thread+0x1a6/0x310 kthread+0xe4/0x120 ret_from_fork+0x1a1/0x270 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page
In the Linux kernel, the following vulnerability has been resolved: net: kcm: Hold RCU read lock while running BPF parser kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which prevents CPU migration, but does not establish an RCU read-side critical section. Consequently, BPF map operations can trigger WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser program. Hold the RCU read lock while running the program.
In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix resize of the RX ring When a AF_XDP socket is attached, the virtnet_rx_resize should resize the rq->xsk_buffs XSK buffer array. Otherwise, when the size grows, the virtnet_rx_resume() causes a write past the end of the array. This is easily reproducable with ethtool -G ens3 rx 32 ./xdpsock -i eth0 -q 0 -r -z & ethtool -G eth0 rx 256
In the Linux kernel, the following vulnerability has been resolved: ipvs: fix integer overflow in ftp helper port/address parsing ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16 (hport) and into unsigned char (p[]) without checking for overflow. A crafted FTP PASV/EPSV response with an over-long port or address octet wraps the value, so the helper configures the data connection with a truncated port/address. The netfilter conntrack FTP helper had the same defect, fixed in commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16 overflows"). Apply the equivalent fix here: widen the port accumulator to u32 and reject values above 65535, and reject address octets above 255.
In the Linux kernel, the following vulnerability has been resolved: cuse: wait for pending RCU callbacks on module exit Since commit 053fc4f755ad ("fuse: fix UAF in rcu pathwalks"), fuse_conn_put() frees the fuse_conn through call_rcu() rather than synchronously. For cuse, fc->release is cuse_fc_release(), which lives in the cuse module. If the module is removed before the RCU grace period ends, the callback jumps into freed module memory: userspace / module unload | RCU softirq ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ close(/dev/cuse) | cuse_channel_release() | fuse_dev_release() | fuse_conn_put(fch->conn) | call_rcu(delayed_release) ------+---> callback queued | rmmod cuse | cuse_exit() | cuse_channel_destroy() | ... | return | | <module text freed> | | rcu_do_batch() | delayed_release() | fc->release() | -> cuse_fc_release() | ^^^ freed text! The freed module text is unmapped by vfree(), so the jump into the stale callback triggers a page-fault Oops. If the virtual address is subsequently reused, the callback could execute unrelated code (undefined behaviour). Fix this by calling rcu_barrier() in cuse_exit() so that any pending fuse_conn release callback completes before the module is removed.
In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL when its inode allocation fails, but fuse_fill_super_submount() passed the result straight to get_fuse_inode() and decremented fi->nlookup without checking it: root = fuse_iget(sb, parent_fi->nodeid, ...); fi = get_fuse_inode(root); fi->nlookup--; Inside fuse_iget() the inode allocation can fail and return NULL. The submount root takes the iget5_locked() path, whose alloc_inode() can fail under memory pressure (the auto-submount branch can fail the same way in new_inode() or fuse_alloc_submount_lookup()): inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set, &nodeid); if (!inode) return NULL; A NULL root makes get_fuse_inode() a container_of() on NULL and the nlookup decrement a write to a bogus address, oopsing the mount. With CONFIG_KASAN the following null pointer dereference is reported when the root inode allocation of an auto-submount fails (e.g. under memory pressure): ================================================================== BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0 Read of size 8 at addr 00000000000002b0 by task ls/942 CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15 Call Trace: <TASK> fuse_get_tree_submount+0x656/0x8b0 vfs_get_tree+0x48/0x140 fc_mount+0x13/0x50 fuse_dentry_automount+0x7a/0xb0 __traverse_mounts+0xca/0x330 step_into+0x339/0xac0 path_lookupat+0xc5/0x2f0 filename_lookup+0x163/0x2a0 vfs_statx+0xd5/0x200 do_statx+0x83/0xd0 __x64_sys_statx+0xa0/0xc0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x78/0xe2 </TASK> ================================================================== Return -ENOMEM instead; the caller tears down the partially built superblock on error, matching the other error returns in this function.
In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds the EPROTO error from the earlier failed self-connect. This rejection causes the child socket created for r1's connection to never be freed on virtio or hyperv transports; only the VMCI transport implements pending_work to revisit and clean up a rejected socket. For a non-blocking connect(), vsock_connect() may return -EINPROGRESS immediately, and vsock_connect_timeout() can later set sk->sk_err asynchronously. Since no vsock transport ever sets sk_err on a socket while it is in TCP_LISTEN state, checking it in vsock_accept() serves no purpose and only carries forward errors left behind by earlier, unrelated connection attempts on the same socket. Remove the checks so accept() no longer rejects valid incoming connections because of a stale error, which also avoids the resource leak described above.
In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix password encoding bounds check The password PSWD_ENCODINGS parser reads password_obj[elem + pos_values] while copying the supported password encodings from the ACPI package. The outer loop only guarantees that elem is within password_obj_count. The encoding count is bounded by MAX_ENCODINGS_SIZE, but that does not guarantee that the ACPI package contains enough entries for all elem + pos_values accesses. A malformed package can therefore declare a non-zero encoding count without providing enough string objects, causing the parser to read past the ACPI package array and pass an out-of-bounds string pointer and length to hp_convert_hexstr_to_str(). Add the same computed-index bounds check used by the other offset-based package parsing loops before reading password_obj[elem + pos_values].
In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Reject negative power cap writes in hwmon hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a __u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge unsigned value by the division and then stored into the u32 argument. As a result a nonsensical, multi-gigawatt socket power limit is sent to the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being rejected. Reject negative values with -EINVAL before the conversion. Tested with HSMP enabled: CAP=$(dirname $(grep -l amd_hsmp_hwmon \ /sys/class/hwmon/hwmon*/name | head -1))/power1_cap # negative write echo -1000000 > $CAP ; echo "ret=$?" # valid positive write must still work echo 400000000 > $CAP ; echo "ret=$?" Before: # echo -1000000 > $CAP ; echo "ret=$?" ret=0 <- accepted; bogus limit sent to SMU # echo 400000000 > $CAP ; echo "ret=$?" ret=0 After: # echo -1000000 > $CAP ; echo "ret=$?" bash: echo: write error: Invalid argument ret=1 <- rejected with -EINVAL # echo 400000000 > $CAP ; echo "ret=$?" ret=0 <- valid write still works
In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/* causes use-afer-free crash when either alloc_percpu() or dev_addr_init() in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure") added ref_tracker_dir_exit() to only free_netdev() path.
In the Linux kernel, the following vulnerability has been resolved: ntfs: fix kmap_local_page() usage in compress Several compressed I/O paths discard the address returned by kmap_local_page() and later access or unmap the page using page_address(). This is invalid for highmem pages, and local mappings must also be unmapped using the address returned by kmap_local_page(). Map each destination page in ntfs_decompress() only while producing the current sub-block. Use memcpy_from_page(), memcpy_to_page(), and memzero_page() for the other page accesses. Remove unnecessary local mappings from ntfs_write_cb(), where pages are accessed through the vmap() mapping.
In the Linux kernel, the following vulnerability has been resolved: ntfs: Fix index_root heap OOB write in ntfs_ir_to_ib() ntfs_ir_to_ib copies all entries from index_root into a freshly allocated index_block_size-byte buffer without verifying that the entries fit in the available space. The entries in index_root may be larger than the usable entry space in the index block. This can cause OOB writes past the end of the allocation. The validator ntfs_index_root_inconsistent() checks that entries are self-consistent within the IR value, but never cross-checks them against index_block_size. There is no bounds check in ntfs_ir_to_ib() before the memcpy. Fixing this at the sink in ntfs_ir_to_ib() since ntfs_index_root_inconsistent() validates the logical consistency of index_root as a structure and a root with large entries is a structurally valid root. The bug is a size conflict of ntfs_ir_to_ib(). Also, the validator is called once per inode load in ntfs_read_locked_inode() while ntfs_ir_to_ib() is only called during a reparent, a check there adds no overhead to the common path. Moreover, even a future call path that bypasses the validator would still be protected. With NULL as first parameter of ntfs_error(), the volume error flag is never set by this call, so the device name will be absent from the error message. In any case, that the caller, ntfs_ir_reparent(), prints an error message that includes the device name on NULL returns. I think this is the best solution available without adding 'struct super_block *sb' as a parameter to ntfs_ir_to_ib(). This heap out-of-bounds write is triggered by a crafted filesystem image, which is not in the kernel threat model, anyway, fixing memory errors would be nice to keep things secure.
In the Linux kernel, the following vulnerability has been resolved: ntfs: reject unprivileged writes to reserved $LX* xattrs Reject setxattr of the reserved $LXUID, $LXGID, $LXMOD and $LXDEV names from userspace unless the caller has CAP_SYS_ADMIN.
In the Linux kernel, the following vulnerability has been resolved: ntfs: serialize resident iomap reads with mrec_lock ntfs_read_iomap_begin_resident() walks the MFT record through ntfs_attr_lookup() -> ntfs_attr_find() without taking ni->mrec_lock, while ntfs_attr_record_resize(), ntfs_make_room_for_attr() and ntfs_resident_attr_record_add() memmove() the same base_ni->mrec buffer under that lock. map_mft_record() only takes a reference and does not serialize, so the reader can observe torn attribute length and offset fields while a writer is relocating the records. KCSAN reports the race between the mmap read fault path and both link() and unlink(): BUG: KCSAN: data-race in ntfs_attr_find / ntfs_attr_record_resize write to 0xffff888100af1018 of 4 bytes by task 96 on cpu 1: ntfs_attr_record_resize+0xd2/0x130 ntfs_attr_record_rm+0xad/0x530 ntfs_delete+0x224/0x640 ntfs_unlink+0x14d/0x280 vfs_unlink+0x157/0x520 read to 0xffff888100af1018 of 4 bytes by task 95 on cpu 0: ntfs_attr_find+0x104/0x5b0 ntfs_attr_lookup+0x39c/0x10c0 ntfs_read_iomap_begin_resident+0xc6/0x230 ntfs_read_iomap_begin+0x5d/0xa0 iomap_iter+0x2e2/0x6e0 iomap_read_folio+0x147/0x2a0 ntfs_read_folio+0x108/0x170 filemap_read_folio+0x35/0x100 filemap_fault+0x993/0x1000 value changed: 0x00000250 -> 0x000001f0 The address is mrec + 0x18, i.e. mft_record.bytes_in_use, and the change is the 96 bytes of one $FILE_NAME attribute being removed. Keep base_ni->mrec_lock from the resident read iomap lookup through iomap_end(). This protects both the attribute walk and the subsequent copy from iomap->inline_data, which points into the MFT record. The non-resident path is left alone: ntfs_lookup() already holds the directory inode's mrec_lock when it reads an index folio through read_mapping_folio(), and taking the lock in the shared wrapper deadlocks there with recursive locking on mrec_lock. The comment above the read_mapping_folio() call in fs/ntfs/dir.c notes the same hazard. The seek path uses the same lookup helper but does not dereference iomap->inline_data. Release the lock before returning from that path, whereas the regular read path records base_ni in iomap->private and releases the lock from its iomap_end() callback. Tested with a reproducer that faults in a 16-byte resident file while another thread runs link()/unlink() on it. Before: 40 KCSAN reports in about one second. After: no reports in 180 seconds over 206,090 read iterations and 423,540 link/unlink cycles. A PROVE_LOCKING build shows no lockdep splat with the same reproducer running for 60 seconds.
In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix cleanup after worker creation failure vdpasim_create() leaves vdpasim->worker as an ERR_PTR when kthread_run_worker() fails. The error path then drops the device reference, which releases the partially initialized simulator. vdpasim_free() unconditionally passes the worker pointer to kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger a general protection fault. Store the worker error, clear the pointer, and only clean up the worker when it was successfully initialized. Also make the release path tolerate partially initialized objects by guarding virtqueue and IOTLB cleanup, since the same release path can be reached from other initialization failures. I found this bug myself, though the patch was written with AI assistance.
In the Linux kernel, the following vulnerability has been resolved: virtio_balloon: quiesce balloon work before device shutdown Commit 8bd2fa086a04 ("virtio: break and reset virtio devices on device_shutdown()") added a generic virtio bus .shutdown handler that breaks and resets every virtio device during device_shutdown(), i.e. on reboot and kexec. virtio_balloon provides no .shutdown of its own, so that generic path runs while the balloon's asynchronous work is still armed. Once the device has been broken, virtqueue_add_inbuf() in virtballoon_free_page_report() returns -EIO and trips its WARN_ON_ONCE(). On a kernel booted with panic_on_warn that turns an ordinary reboot, for example a kexec based upgrade, into a fatal panic in the middle of device_shutdown(), so the machine never reaches the new kernel. Relaxing that single WARN_ON_ONCE() would only hide the symptom: the inflate/deflate and OOM paths do not warn, they call wait_event(vb->acked, ...) and would instead block forever on a broken queue that can no longer complete. The device has to be quiesced, not just kept quiet. Add a .shutdown handler that quiesces the balloon via the shared virtballoon_quiesce() helper while the device is still alive, and only then breaks and resets it via virtio_device_shutdown(). Unlike virtballoon_remove() the balloon workqueue is not destroyed, as shutdown does not free the device and cancel_work_sync() together with stop_update already prevent any further work from being queued.
In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: fix wrong list iterated in add_direct_chain error path In add_direct_chain(), newly allocated direct MR entries are added to the local list 'tmp', which is spliced into mr->head only on success. On the error path, the cleanup loop was incorrectly iterating over mr->head instead of tmp. Fix by iterating over 'tmp' in the err_alloc cleanup path.
In the Linux kernel, the following vulnerability has been resolved: virtio: rtc: time out alarm requests RTC class operations run with rtc_device.ops_lock held. The virtio RTC alarm requests currently wait without a timeout for the device to return their requestq buffers. On surprise removal, virtio-pci marks the virtqueues broken before unregistering the virtio device. If an alarm request is waiting when the device stops responding, viortc_remove() blocks in viortc_class_stop() while trying to acquire ops_lock. The request cannot complete and device removal hangs until the waiting task is signalled. Use the same 60-second timeout as clock read requests for alarm reads, alarm programming, and alarm interrupt enable requests. The existing message reference counting keeps a timed-out request alive until a late response or device teardown.
In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers the CLKOUT clock provider with of_clk_add_provider(), but nothing ever unwinds it: there is no of_clk_del_provider() call and the driver has no remove callback. Each of_clk_add_provider() allocates a struct of_clk_provider, takes a reference on the OF node and adds an entry to the global of_clk_providers list, none of which is released when the device is unbound. Every bind/unbind (or module reload) therefore leaks a provider structure and an of_node reference. The clock itself is already device-managed (devm_clk_register()); only the provider registration was not. Use devm_of_clk_add_hw_provider() so the provider is removed automatically on unbind. Tie it to the parent i2c device, whose OF node carries the #clock-cells and clock-output-names properties (the RTC class device has no OF node of its own).
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix request buffer leak in smb2_new_read_req() smb2_new_read_req() allocates the request buffer with smb2_plain_req_init() but only publishes it to the caller with *buf = req at the very end of the function. Two error returns sit in between: rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server, (void **) &req, total_len); if (rc) return rc; if (server == NULL) return -ECONNABORTED; [...] rdata->mr = smbd_register_mr(server->smbd_conn, &rdata->subreq.io_iter, true, need_invalidate); if (!rdata->mr) return -EAGAIN; On either of them the buffer is neither released nor handed back, so it is leaked. The caller cannot clean up after it: smb2_async_readv() does 'goto out' on a non-zero return, which skips the cifs_small_buf_release(buf) at async_readv_out, and buf has not been assigned at that point in any case. The write path has never had this problem. smb2_async_writev() registers the memory region inline and jumps to its release label instead of returning: wdata->mr = smbd_register_mr(...); if (!wdata->mr) { rc = -EAGAIN; goto async_writev_out; } Commit b7972092199f ("cifs: smbd: Retry on memory registration failure") changed both sides from -ENOBUFS to -EAGAIN in a single patch, which puts the two shapes next to each other. Only the -EAGAIN return is reachable in practice, because smb2_plain_req_init() calls smb2_reconnect() first and that already fails with -EIO when server is NULL, before anything is allocated. Both returns are given the same treatment here rather than leaving one of them correct only by accident. Because -EAGAIN is a replayable error, the failure also reaches the retry block at the end of smb2_async_readv(), which marks the subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be retried rather than ending the I/O, and every attempt that reaches it leaks another buffer. smb2_should_replay() short-circuits on tcon->retry, so on a hard mount the attempt count is not bounded by the retrans setting. Only the asynchronous read path is affected. The synchronous SMB2_read() caller passes rdata == NULL and the memory registration block is guarded on rdata. The memory registration failure path was pointed out by the Sashiko AI reviewer while it was reviewing an unrelated patch to smb2_async_readv().
In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-rzg2l: Fix loss of interrupt rzg2l_clear_irq_int() and rzg2l_clear_tint_int() perform a read-modify-write on the ISCR/TSCR status registers to clear the bit for the interrupt just handled. Since these registers are write-0-to-clear per bit, this is racy: If another interrupt's status bit gets set between the read and the write, that bit is written back as 0 by the software-constructed value, clearing an interrupt that hasn't been serviced yet and losing it. This can be reproduced by triggering multiple interrupts at once, e.g.: gpioset -c gpiochip0 355=0 353=0 328=0 352=0 Fix this by writing back only the bit being cleared, with all other bits set to 1, instead of read-modify-writing the whole register. Since 1-bits are left unchanged by hardware, concurrently-set status bits for other interrupts are preserved.
In the Linux kernel, the following vulnerability has been resolved: irqchip/ast2700-intc: Avoid allocating in the irq_domain activate() callback The interrupt core calls the irq_domain_activate() callback from __setup_irq() with desc->lock held and interrupts disabled. Both aspeed_intc1_irq_domain_activate() and aspeed_intc0_resolve_route() test a compatible string with fwnode_device_is_compatible(). fwnode_device_is_compatible() invokes fwnode_property_match_string(), which allocates with GFP_KERNEL. That's obviously not possible with interrupts disabled and a raw spinlock held. Both call sites are only ever handed OF nodes, so use of_device_is_compatible() instead: it walks the property in place and does not allocate.
In the Linux kernel, the following vulnerability has been resolved: clk: visconti: Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. visconti_clk_register_gate() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents.
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Clear per-CPU IRS data on teardown IRS affinity setup publishes an IRS pointer and IAFFID state in the per-CPU data before the remaining IRS initialization can fail. The error path then frees the IRS data without clearing that published state, leaving CPUs associated with freed memory. On initialization failure and normal IRS teardown, clear the per-CPU IRS association by removing the stale pointer to irs_data. Also invalidate the per-CPU IAFFID state for any CPUs that were tied to the IRS before it was freed.
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Check get_logical_index() return value in MADT IAFFID parsing In gic_acpi_parse_iaffid() a given MADT GICC entry might not correspond to a logical cpu recognized by the kernel, resulting in the cpu variable initialization to an error value. Currently, the get_logical_index() return value is not checked for failure, which might result in out-of-bounds memory corruption while trying to index a per_cpu variable array. Add a check to evaluate get_logical_index() return value.
In the Linux kernel, the following vulnerability has been resolved: ALSA: ice1712: Fix the card leak at probe error with the auto-cleanup snd_ice1712_probe() performs multiple initialization steps after snd_card_new(), but directly returns on failures from later steps without releasing the ALSA card, causing resource leaks when probing fails. Use snd_devm_card_new() together with scope-based cleanup via __free(snd_card_unref), and clear the card pointer after successful registration to keep it alive.
In the Linux kernel, the following vulnerability has been resolved: ntfs: fix off-by-one page overflow in ntfs_decompress() The per-token range check in ntfs_decompress() uses if (cb >= cb_sb_end || dp_addr > dp_sb_end) break; so dp_addr == dp_sb_end falls through to the symbol copy `*dp_addr++ = *cb++`, writing one byte past the destination page. Since NTFS_SB_SIZE == PAGE_SIZE the destination is a single page, so the byte lands in the adjacent page, and *dest_ofs is left one past the sub-block end (the later `*dest_ofs &= ~PAGE_MASK` then yields 1, not 0, so the page is never finalized and later sub-blocks keep writing further past it). A corrupted compressed $DATA attribute thus produces a bounded run of out-of-bounds writes when the file is read. Break as soon as dp_addr reaches dp_sb_end; a full sub-block still completes, as its final copy advances dp_addr to exactly dp_sb_end.
In the Linux kernel, the following vulnerability has been resolved: ntfs: validate usa_ofs before preserving the update sequence number When ntfs_mft_record_alloc() reuses a free mft record it reads the old update sequence number straight from the on-disk record: usn = *(__le16 *)((u8 *)m + le16_to_cpu(m->usa_ofs)); Here m points into the raw $MFT page-cache folio, which still holds unvalidated, MST-protected bytes: the folio is read by a plain iomap_read_folio() and neither post_read_mst_fixup() nor ntfs_mft_record_check() has run on it (both work on private copies). m->usa_ofs is therefore an untrusted u16, and a corrupted record can put it past the end of the record so the two-byte read lands outside the folio. Reading such a record while creating a file gives, under KASAN: BUG: KASAN: use-after-free in ntfs_mft_record_alloc+... Read of size 2 at addr ... ntfs_mft_record_alloc -> __ntfs_create -> ntfs_create -> path_openat Only preserve the old update sequence number when usa_ofs is even and in range, mirroring the check ntfs_mft_record_check() already applies; otherwise leave usn zero, which the existing restore below skips.
In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms chip->timer while holding chip->spinlock and accesses the card-private mtpav state. snd_mtpav_free() currently takes the same lock and calls timer_delete() when the timer is active. This only removes a pending timer; it does not wait for a callback that is already running and does not prevent the callback from rearming the timer. A callback running on another CPU can therefore continue after snd_mtpav_free() releases the lock and access the card-private state while the card is being torn down. It can also rearm the timer after timer_delete() has returned. Call timer_shutdown_sync() without holding chip->spinlock. This waits for any running callback to finish and prevents further rearming before the card-private mtpav state is released.
In the Linux kernel, the following vulnerability has been resolved: xsk: fix NULL pointer dereference in __xsk_rcv() In the __xsk_rcv() multi-buffer path, xsk_buff_alloc() is called in a loop without checking its return value. xsk_buff_can_alloc() only counts fill queue entries without validating their addresses, so it can succeed while xsk_buff_alloc() rejects all remaining entries and returns NULL. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__xsk_rcv+0x426/0xc20 (net/xdp/xsk.c:350) Call Trace: xsk_generic_rcv+0x26d/0x5f0 xdp_do_generic_redirect+0x3c5/0xcf0 do_xdp_generic+0x92f/0xe70 __netif_receive_skb_core.constprop.0+0xf7e/0x2b30 Fix this with a two-stage transaction. First allocate and stage all buffers required for the packet, recycling all staged buffers with xsk_buff_free() if any allocation fails. Only after this stage succeeds, copy the data, reserve the RX descriptors, and release the buffers in an error-free loop.
In the Linux kernel, the following vulnerability has been resolved: net: bridge: Reject descending VLAN tunnel ranges A pair of descending VLAN and tunnel IDs can pass the tunnel range span check. The VLAN subtraction produces a negative int, which is converted to unsigned when compared with the u32 tunnel ID subtraction. It can therefore equal the wrapped tunnel ID delta. The range loop then performs no iterations. Since the batched notification handling added a post-loop error check, this leaves err uninitialized and makes the request's return value unpredictable. Reject descending VLAN ranges before comparing the spans. Valid ascending and single-entry ranges remain unchanged, while malformed descending ranges consistently return -EINVAL. This issue was found by a static analysis checker and confirmed by manual source review.
In the Linux kernel, the following vulnerability has been resolved: netdevsim: update queue NAPI association on queue reset In netdevsim, receive queues (struct nsim_rq) embed their own struct napi_struct. When queue reset is performed (e.g. via queue_reset debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq, and nsim_queue_mem_free() later deletes and frees the old one. However, nsim_queue_start() failed to update the queue-to-NAPI mapping via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to point to the old NAPI struct. After the old queue was freed, a subsequent queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN slab-use-after-free read in nla_put_napi_id() when accessing rxq->napi->napi_id. Fix this by calling netif_queue_set_napi() in nsim_queue_start() to associate the new NAPI with the RX queue, and clear the association with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown.
In the Linux kernel, the following vulnerability has been resolved: net: qlcnic: validate unified ROM sections before loading The unified ROM parser reads directory, product, and data-descriptor fields from the firmware file. Existing validation forms table and data ends with unchecked additions and multiplications. Malformed values can wrap before they are compared with the firmware size. The parser also dereferences typed pointers at firmware-controlled offsets. Valid descriptor extents alone are insufficient for the consumers. The loader reads a fixed-size bootloader regardless of its declared size, the version parser assumes a 17-byte tail, and a partial final firmware word is read as a full u64. A truncated image can therefore make the driver read beyond the firmware allocation during validation or loading. Replace the pointer-returning parser with bounded range helpers. Validate table entry sizes, descriptor indices, section ranges, the fixed bootloader load length, and the version tail before exposing any section. Read all file fields with unaligned little-endian accessors and assemble a partial final word from only the bytes that remain. Apply the same range checks to the legacy image before reading its fixed fields.
In the Linux kernel, the following vulnerability has been resolved: ip6mr: do not clone dst in ip6mr_cache_report() IPv6 input attaches a non-refcounted (NOREF) dst to skbs under RCU. When an ingress multicast packet misses MFC lookup, ip6mr_cache_unresolved() places the skb onto the unresolved queue, escaping the receive-side RCU grace period. If the underlying route is deleted and freed, and the MFC queue is later resolved with a wrong parent interface, ip6_mr_forward() invokes ip6mr_cache_report(..., MRT6MSG_WRONGMIF), which executes dst_clone(skb_dst(pkt)) on the freed dst entry, triggering a slab use-after-free. Report packets queued to mroute6_sk (a raw socket) and netlink notifications do not require an attached dst entry. Fix this by: 1. Removing dst_clone() in ip6mr_cache_report() and ensuring report skbs do not hold a dst. 2. Dropping skb_dst before queuing unresolved skbs in ip6mr_cache_unresolved(), matching the fact that multicast forwarding resolves outgoing routes anew via ip6_route_output().
In the Linux kernel, the following vulnerability has been resolved: inetpeer: randomize RB-tree node comparison using SipHash The inetpeer rate limiting system stores peer entries in a Red-Black tree keyed deterministically on the remote IP address. Because tree lookups walk the RB-tree using standard lexicographical comparisons (inetpeer_addr_cmp), an off-path adversary can predict the exact topology of the tree and the sequence of nodes traversed during lookups (the gc_stack candidate list). By combining deterministic tree traversal with aggressive garbage collection (triggered when tree size exceeds inet_peer_threshold), an attacker can selectively force the eviction of targeted inet_peer nodes. When an evicted node is subsequently re-created upon receiving a new packet, its rate-limiting token bucket (rate_tokens, rate_last) is reset to full capacity. This creates a side-channel primitive allowing off-path attackers to bypass IP-keyed ICMP rate limits and infer open UDP ports (similar to SAD DNS style attacks). Mitigate this by randomizing the RB-tree node comparison logic using SipHash with a secret key (inetpeer_hash_key) initialized via net_get_random_once(). Nodes are ordered in the tree by SipHash(addr, key) rather than raw IP addresses. Because the secret key is unknown to external entities, the tree layout and lookup traversal paths are unpredictable to off-path adversaries, breaking the deterministic eviction gadget. Cache the computed 64-bit SipHash (hash) in struct inet_peer and compute the target hash (dhash) once at the beginning of inet_getpeer() to avoid recomputing SipHash at every step of the RB-tree walk.
In the Linux kernel, the following vulnerability has been resolved: net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the current backlog plus the packet length fits within the queue limit: sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ) gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ) sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo) sch->qstats.backlog + skb->len <= q->limit (plug) sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len are unsigned int, so all sums are computed in 32 bits and wrap at 2^32. Once the true backlog exceeds 4 GiB the wrapped sum becomes small and admission keeps succeeding, so the queue grows without bound and the kernel can be driven to OOM. Promote the sums to u64 so admission stops once the true backlog exceeds the limit. The limit is u32, so the bounded queue stays below 2^32 and the stored u32 backlog never wraps. The bug can only be reproduced as root (albeit with ridiculous setup): attach a gred (or bfifo/plug) qdisc with a limit near 4 GiB, leaving the default VQ unconfigured (for gred), and drive >4 GiB of queued traffic (e.g. via a size table / stab to inflate qdisc_pkt_len, or sustained high-rate traffic). The u32 backlog+len sum wraps at 2^32, admission keeps succeeding, and the queue grows unboundedly to OOM.
In the Linux kernel, the following vulnerability has been resolved: net/smc: free stashed qentry before overwrite in REQ_ADD_LINK to ADD_LINK transition When smc_llc_event_handler() transitions the local LLC flow from SMC_LLC_FLOW_REQ_ADD_LINK to SMC_LLC_FLOW_ADD_LINK on arrival of an ADD_LINK request, it calls smc_llc_flow_qentry_set() unconditionally: if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_REQ_ADD_LINK) { lgr->llc_flow_lcl.type = SMC_LLC_FLOW_ADD_LINK; smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, qentry); ... } A CONFIRM_LINK or ADD_LINK_CONT arriving while flow->type is SMC_LLC_FLOW_REQ_ADD_LINK is stashed into flow->qentry via the SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT handler (which stores into flow->qentry for any non-NONE flow type). When the subsequent ADD_LINK arrives, the REQ_ADD_LINK branch overwrites flow->qentry with the new pointer without first freeing the stashed allocation, leaking one kmalloc object. The stashed entry has no consumer: smc_llc_wait() is only called from llc_add_link_work, which is not yet scheduled while the flow type remains REQ_ADD_LINK. No waiter is sleeping on llc_msg_waiter at this point. It is safe to unconditionally free any stashed qentry before the overwrite. Call smc_llc_flow_qentry_del() before smc_llc_flow_qentry_set() in the REQ_ADD_LINK branch. smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the normal path where no entry is stashed is a no-op.
In the Linux kernel, the following vulnerability has been resolved: net/smc: free pending qentry in smc_llc_flow_stop() before memset smc_llc_flow_stop() resets a flow struct with a blind memset: spin_lock_bh(&lgr->llc_flow_lock); memset(flow, 0, sizeof(*flow)); flow->type = SMC_LLC_FLOW_NONE; spin_unlock_bh(&lgr->llc_flow_lock); If flow->qentry is non-NULL at this point the pointer is overwritten without the allocation being freed, leaking one kmalloc object. A late-arriving duplicate CONFIRM_LINK or ADD_LINK_CONT message can set flow->qentry after the legitimate message has been consumed by the waiter via smc_llc_flow_qentry_clr() (which NULLs the pointer but leaves flow->type non-zero) but before the flow completes and smc_llc_flow_stop() runs. In that window the duplicate is stashed into flow->qentry, and then lost when smc_llc_flow_stop() zeros the struct. Call smc_llc_flow_qentry_del() inside the lock before the memset. smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the normal case where no entry is pending is a no-op.
In the Linux kernel, the following vulnerability has been resolved: net: bridge: arp/nd proxy: fix reading neigh ha Currently neigh ha address is read directly, but that can result in torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot to take a stable snapshot of the address.
In the Linux kernel, the following vulnerability has been resolved: vxlan: fix reading neigh ha Currently arp/neigh_reduce read neigh ha directly which can lead to partial reads while the neigh is being updated. Use neigh_ha_snapshot to take a stable snapshot of the address similar to route_shortcircuit which already does the right thing.
In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: zero referring call lists before decoding decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so each referring_call_list starts uninitialized. decode_rc_list() assigns rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero referring calls therefore leaves the pointer uninitialized, and nfs4_callback_sequence() later passes stale slab contents to kfree(). Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is NULL from the beginning, including valid empty referring call lists.
In the Linux kernel, the following vulnerability has been resolved: NFSv4.2: fix LAYOUTSTATS send buffer exhaustion encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE), i.e. 256 bytes, for the layoutupdate4 body written by the layout driver. The flexfiles record can exceed that. ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4, an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4 and the bool add a further 144, so the body passes 256 bytes before the netaddr4 is encoded at all. encode_layoutstats() additionally writes the deviceid4 and the layoutupdate4 lou_type word, neither of which the macro accounts for. The filehandle and the address are both chosen by the server, through LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the end of the send buffer. xdr_reserve_space() returns NULL once that happens, and the two ff_layout_encode_io_latency() calls run with dss_info->mirror->lock held, so a NULL return there leaves the lock permanently held. Raise PNFS_LAYOUTSTATS_MAXSIZE to 384 so that the record fits inside the reservation.
In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: key the data server cache on the NFS version nfs4_pnfs_ds_add() keys the per-net data server cache on the multipath address set alone, and struct nfs4_pnfs_ds records no version. That suffices for the files layout driver, which always connects with version 4, but flexfiles takes its version tuple from GETDEVICEINFO per device, and one address can legitimately serve both NFSv3 and NFSv4. Two deviceids on one address with different ds_versions[0].version therefore share a single nfs4_pnfs_ds, and whichever mirror connects first pins ds_clp to its own version. The other one is handed that client anyway, so it selects rpc_call_ops for a version the connection does not speak, and the mismatched sequence-slot handling dereferences NULL. Add the version to the cache key so the two cannot alias, giving each version its own nfs4_pnfs_ds and connection while both mirrors stay usable. Only the major version is compared, since that is what selects rpc_call_ops and rpc_ops; v4.0 and v4.1 keep sharing a client. The files layout driver passes the 4 it already hardcodes at connect time.
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix call to hardware monitoring event handler The first parameter of hwmon_notify_event() is supposed to be the hardware monitoring device. The bnxt driver calls it with the platform device as first parameter instead. This API break results in undefined behavior and may result in a crash. Pass the hardware monitoring device as parameter instead to fix the problem.
In the Linux kernel, the following vulnerability has been resolved: ptp: netc: fix period truncation and potential divide-by-zero in PEROUT The max_period bound in net_timer_enable_perout() was computed as: max_period = (u64)NETC_TMR_DEFAULT_FIPER + integral_period; which exceeds U32_MAX when integral_period > 0 (e.g. 0x100000002 for the default 333333333 Hz clock). A period_ns that passes this check but exceeds U32_MAX is then silently truncated when stored into the u32 struct netc_pp::period field. A truncated value of zero can reach netc_timer_set_perout_alarm(), where the local u32 period variable would also be 0, causing a divide-by-zero in roundup_u64(delta, period) whenever the stime < min_time branch is taken (which always happens for a start time of {0, 0}). Additionally, netc_timer_enable_periodic_pulse() and netc_timer_enable_fiper() both compute: fiper = pp->period - integral_period; A zero pp->period results in an unsigned wraparound to 0xFFFFFFFD, mis-programming the FIPER hardware register. Fix all three issues by capping max_period at NETC_TMR_DEFAULT_FIPER (0xFFFFFFFF). This ensures that any period_ns passing the range check fits in a u32 without truncation, so the stored value is always valid and non-zero. The accepted range is reduced by integral_period ns (typically only a few nanoseconds), which is negligible in practice.
In the Linux kernel, the following vulnerability has been resolved: net/sched: account classifier filter allocations to memcg Allocations in the tc classifier *_change() paths (filter objects, per-CPU counters, and per-filter aux data) use plain GFP_KERNEL without __GFP_ACCOUNT, allowing unprivileged users to pin kernel memory outside memcg charging. The shared tcf_exts_init_ex() action array allocation in cls_api.c was also uncharged; this patch closes it along with the per-classifier filter-object/percpu/aux allocations that remain unaccounted. Add GFP_KERNEL_ACCOUNT to: - the shared tcf_exts_init_ex() action array (cls_api.c), common to every filter of every classifier (32 pointers, 256 bytes); - the filter-object, per-CPU-counter, and per-filter aux allocations in cls_basic, cls_bpf, cls_cgroup, cls_flow, cls_flower, cls_fw, cls_matchall, cls_route and cls_u32; - the u32_init_knode() replace-path knode allocation (cls_u32.c), which allocates the same struct tc_u_knode + sel.keys on every replace of an existing knode and was missed by the create-path-only conversion. Also fix the cls_basic error path: basic_change() inserts fnew into the IDR before allocating the per-CPU counter. If alloc_percpu() fails the errout path kfree'd fnew without idr_remove, leaving a dangling pointer in the IDR. With GFP_KERNEL_ACCOUNT the percpu alloc becomes failable on demand (memcg at memory.max), making the dead path attacker-reachable and burning the handle permanently. Add the idr_remove on the percpu failure path, matching the basic_set_parms failure-path pattern. Note: vega@nebusec.ai provided a poc for basic_cls, but it was easy to extend to the other classifiers. Conditions to recreate the bug: - CONFIG_NET_SCHED, CONFIG_NET_CLS_* (the classifier being used), CONFIG_NET_CLS_ACT, CONFIG_MEMCG, CONFIG_USER_NS, CONFIG_NET_NS. - Unprivileged user in a fresh user+network namespace (unshare -Urn), or root with CAP_NET_ADMIN. - Create a large number of tc filters (e.g. tc filter add dev lo ingress ... <classifier> ...) while watching a memcg-limited cgroup: system slab grows far faster than memory.current, pinning kernel memory outside memcg charging.
In the Linux kernel, the following vulnerability has been resolved: net: sparx5: fix sleep in atomic context in MAC table access sparx5_set_rx_mode() runs with netif_addr_lock_bh held and iterates dev->mc via __dev_mc_sync(), which per address calls sparx5_mc_sync() / sparx5_mc_unsync() -> sparx5_mact_learn() / sparx5_mact_forget(). These take sparx5->lock, a mutex, and then poll the MAC access command register with readx_poll_timeout(). A mutex may block, which is not allowed from atomic context. Convert the driver to the new .ndo_set_rx_mode_async callback introduced in commit 3554b4345d85 ("net: introduce ndo_set_rx_mode_async and netdev_rx_mode_work"). The async callback is invoked from process context, so the mutex and sleeping completion poll can remain. Observed with CONFIG_PROVE_LOCKING, CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 217, name: ip preempt_count: 201, expected: 0 Call trace: __might_resched+0x144/0x248 __might_sleep+0x48/0x7c __mutex_lock+0x74/0x850 mutex_lock_nested+0x24/0x30 sparx5_mact_learn+0x78/0x100 sparx5_mc_sync+0x40/0x54 __hw_addr_sync_dev+0xc4/0x170 sparx5_set_rx_mode+0x4c/0x58 __dev_set_rx_mode+0x64/0xa4 __dev_open+0x1ec/0x26c
In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Skip VMBus module cleanup for non-nested root partition The VMBus module initialization function, hv_acpi_init(), currently does nothing when running in the root partition and root is not nested in another VM. But the initialization function reports success, so the VMBus module is indeed loaded. VMBus functionality is not actually needed, but the VMBus module must be loaded so that hv_vmbus_exists() can answer correctly. Furthermore, the mshv_root dependency on the VMBus module is needed as described in the commit message for 840b740a35bf ("mshv: Add conditional VMBus dependency"). Loading the VMBus module without actually initializing it causes failures if the module should later be unloaded. The module unload code tries to clean up things that were never initialized, resulting in memory faults and a panic. Fix this by having VMBus module exit function perform the same check for non-nested root partition, and do nothing in such a case, just like hv_acpi_init(). In the long run, the code that manages the Hyper-V provided SynIC should be refactored to better coordinate the requirements of root partition scenarios and normal VM scenarios, and to hopefully remove the hv_vmbus_exists() dependnecy between mshv_root and VMBus modules. Preventing the current unload failure scenario is an expediency until such a refactoring is done.
In the Linux kernel, the following vulnerability has been resolved: fuse: invalidate the correct range after O_APPEND direct write fuse_direct_write_iter() captures pos before generic_write_checks(), which moves ki_pos to EOF for O_APPEND writes: fuse_direct_write_iter() { pos = iocb->ki_pos; /* 0 (user-supplied) */ generic_write_checks(); /* ki_pos -> EOF */ fuse_direct_io(); /* writes at EOF, correct */ invalidate(pos, pos + res); /* [0, res) -- wrong */ } The post-write invalidation targets a stale range instead of the actual written range at EOF. This can cause data inconsistency when the file size is not page-aligned. The tail page straddling EOF has a valid portion before EOF that concurrent readers can fault back in during the DIO write window: Tail page (file size X not page-aligned): page_start X (EOF) page_end |--- valid data ----|-- stale --| CPU0 (O_APPEND DIO writer) CPU1 (buffered reader) -------------------------- ---------------------- invalidate [X, X+len) tail page evicted FUSE_WRITE in flight ... read [page_start, X) tail page re-faulted [X, page_end) = stale FUSE_WRITE completes i_size = X + len invalidate [0, len) <- WRONG tail page still cached read [X, X+len) hits stale tail page returns old data Fix by reading pos back from iocb->ki_pos after generic_write_checks(), as generic_file_direct_write() does. Also fix a typo in the comment ("may have" -> "may have competed").
In the Linux kernel, the following vulnerability has been resolved: fuse: Fix the condition to enable over-io-uring The existing condition in fuse_uring_cmd() is there only to avoid disabling io-uring for connections that already run with it, missing was a condition to refuse any IORING_OP_URING_CMD if the connection/channel didn't get enabled because of missing FUSE_INIT reply flag FUSE_OVER_IO_URING. Without the reply flag the barrier in fuse_uring_ready() doesn't work and IO could already be going on and cause deadlock states (at a minimum one between fch->bg_lock and queue->lock). The change itself is trivial, but brings behavior change, FUSE_OVER_IO_URING has to be set in the FUSE_INIT_REPLY by fuse servers to accept any IORING_OP_URING_CMD. Libfuse does that and the only non-libfuse implementation I found (fractal-fuse) also does it. Qemu patches for fuse-io-uring are not merged yet, as far as I know. Moved up is the smp_load_acquire(&fch->initialized) check, as a fuse-server implementation might try to setup io-uring before FUSE_INIT is processed and might have gotten -EOPNOTSUPP instead of -EAGAIN. Also fixed is a stale comment that explains the handling of the FUSE_OVER_IO_URING flag in early RFC versions. If there should be a report from any library or application we probably need to revert this commit.
In the Linux kernel, the following vulnerability has been resolved: arm64: process: Fix context switching MTE store-only tag check SCTLR_EL1.TCSO0 is set when user opt-in for MTE store-only tag check mode. However, it is not part of SCTLR_USER_MASK which imply that on context switch we never clear SCTLR_EL1.TCSO0, so we are leaking that setting into another task. Fix that by including SCTLR_EL1_TCSO0_MASK into SCTLR_USER_MASK
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: access chan->conn safely in get/setsockopt Since commit b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") l2cap_chan::conn has held reference and remains non-NULL also after the corresponding hci_conn is deleted. In this state accessing various fields eg. hci_conn::hdev is invalid, which leads to KASAN crash in l2cap_sock_setsockopt() access of conn->hcon->hdev. Check l2cap_chan::conn.hcon corresponds to an alive hci_conn before trying to use it in l2cap_sock.c. Hold l2cap_chan_lock() in getsockopt/setsockopt to ensure it stays alive, and to avoid data races in l2cap_chan fields.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN New sk should not be added to parent socket accept queue after last l2cap_sock_cleanup_listen() has run in l2cap_sock_teardown_cb() and state set to BT_CLOSED, as that can result to UAF on dereferencing the dangling parent reference. l2cap_sock_new_connection_cb() may race with parent l2cap_chan teardown, due to chan->state accessed without consistent locking: [Task 1] [Task 2] l2cap_sock_release(parent) l2cap_connect l2cap_sock_shutdown pchan = l2cap_global_chan_by_psm l2cap_chan_lock(pchan) l2cap_chan_close l2cap_sock_teardown_cb pchan->state = BT_CLOSED l2cap_chan_unlock(pchan) ------> l2cap_chan_lock(pchan) l2cap_new_connection l2cap_sock_new_connection_cb l2cap_chan_lock(pchan) <-------- l2cap_chan_unlock(pchan) l2cap_sock_kill(parent) /* bt_sk(sk)->parent dangling */ Fix by adding check for sk_state == BT_LISTEN after acquiring sk lock in l2cap_sock_new_connection_cb(). Add lock_sock() around sk_state writes where missing, to avoid data races. Although the data races on pchan->state should be fixed too, this defensive sk_state check probably makes sense in any case.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix race l2cap_sock_cleanup_listen() vs. put_chan For L2CAP sockets without owning sk->sk_socket, reading l2cap_pi(sk)->chan may race against concurrent l2cap_sock_kill() -> l2cap_sock_put_chan(). This excludes simultaneous proto_ops callbacks, but access in l2cap_sock_cleanup_listen() has unsafe lockless read. [Task 1] [Task 2 (hdev->workqueue)] l2cap_sock_release(parent) l2cap_disconn_cfm l2cap_sock_cleanup_listen l2cap_conn_del bt_accept_dequeue l2cap_chan_del lock_sock(sk) l2cap_sock_teardown_cb bt_accept_unlink bt_sk(sk)->parent = NULL release_sock(sk) ----------------> lock_sock(sk) parent = /* NULL */ lock_sock(sk) <--------------------- release_sock(sk) sock_set_flag(sk, SOCK_ZAPPED) l2cap_sock_close_cb l2cap_sock_kill(sk) l2cap_sock_put_chan chan = READ l2cap_pi(sk)->chan l2cap_pi(sk)->chan = NULL l2cap_chan_hold_unless_zero l2cap_put_chan(chan) kref_get_unless_zero(&chan->ref) Task 1 may observe NULL which causes null-ptr-deref. Fix the race by taking lock_sock() in l2cap_sock_kill() to synchronize with l2cap_sock_cleanup_listen(). hold_unless_zero() is not needed here, l2cap_pi(sk)->chan owns reference if it is non-NULL. Clarify code comments vs. locking.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: Fix out-of-bounds DMA read in the TX path btmtksdio_tx_packet() rounds the transfer size up to the SDIO block size of 256 bytes, but hands the host controller the SKB buffer as is: err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data, round_up(skb->len, MTK_SDIO_BLOCK_SIZE)); Only skb->len bytes hold packet data, so the controller reads up to 255 bytes of uninitialised memory and sends it to the device over the SDIO bus. Depending on how much tailroom slack the SKB allocation happens to carry, that read can also extend past the end of the buffer. Compute the padded length up front, ensure the SKB has tailroom for it, and zero-fill the padding with skb_put_zero(). skb->len then covers the padding, so sdio_writesb() no longer needs to round up. byte_tx keeps counting the header and the payload only, and the error path restores the SKB so that the caller can requeue it. Writing behind skb->tail is only safe because the driver owns the buffer, which "Bluetooth: btmtksdio: Take exclusive ownership of the SKB before TX" ensures.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Validate the FW dump header length nxp_process_fw_dump() pulls the ACL header off the frame and then reads seq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data, without checking that the ACL payload is long enough to contain it. h4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the number of payload bytes named in that header, so skb->len is 4 + dlen with dlen supplied by the controller and possibly smaller than the 8 byte dump header, or zero. A short frame with connection handle 0xfff therefore reads both fields from beyond the received data. Beyond the read itself, buf_len is what terminates a dump: a value of zero makes the driver call hci_devcd_complete() and reset the controller, so a truncated frame can end a dump early. Use skb_pull_data() to validate and pull the FW dump header before accessing its fields. Warn and reject the chunk if the header is truncated.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop rfcomm_apply_pn() accepts the MTU value from a remote PN (Parameter Negotiation) frame without checking for zero. When the remote peer sends an MTU of zero, d->mtu is set to 0. This causes the sendmsg path to enter an infinite loop when fragmenting data, as each fragment has size == min_t(size_t, len, 0) == 0, so the remaining length never decreases. The infinite allocation of zero-length skbs exhausts all system memory. Fix by clamping d->mtu to RFCOMM_DEFAULT_MTU when the negotiated value is zero, consistent with the initial value assigned in rfcomm_dlc_alloc().
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: do not leak an hci_conn when a second LE connect is rejected create_le_conn_complete() decides whether the failed connection is still pending by comparing it against hci_lookup_le_connect(), which returns the first LE connection in BT_CONNECT. That is the same connection only while at most one is pending. Two can be pending. Connections created on the passive scan path sit in BT_CONNECT with HCI_CONN_SCANNING set and are invisible to hci_lookup_le_connect() until hci_le_create_conn_sync() clears the flag when their command is issued, so the -EBUSY guard in hci_connect_le() does not prevent a second connection from being queued while the first is still on the scan path. Whenever two connections are in BT_CONNECT at once, the lookup may return one connection while create_le_conn_complete() is reporting the failure of the other; the early exit then drops the error and hci_conn_failed() never runs on the connection that failed. The controller also rejects a second HCI_OP_LE_CREATE_CONN issued while another connection creation is still outstanding, per Core Spec Vol 4, Part E. The spec calls for Command Disallowed there; the bcm43438 observed here answers with an LMP/LL error code instead, which bt_to_errno() maps to the -EPROTO (-71) in the log below. The leaked connection stays in BT_CONNECT forever, and because hci_connect_le() refuses to dial while hci_lookup_le_connect() finds anything, every subsequent attempt to reach any peer fails with -EBUSY and no command reaches the controller at all. Seen on a bcm43438 with two BLE peers polled on the same interval (state 5 is BT_CONNECT; both handles are UNSET ones, allocated from the ida above HCI_CONN_HANDLE_MAX): Bluetooth: hci1: Opcode 0x2013 failed: -71 # hcitool con < LE 14:9C:EF:03:68:81 handle 3840 state 5 lm CENTRAL < LE C4:D3:6A:8C:B5:38 handle 3841 state 5 lm CENTRAL A btmon capture across the next ten minutes of connect attempts contains no HCI_OP_LE_CREATE_CONN at all; outgoing LE connections do not recover until the adapter is reset. With this change the same scenario fails the rejected connection cleanly and further connects to both peers go through. Ask about the connection itself instead of about the device.
In the Linux kernel, the following vulnerability has been resolved: xsk: honor XDP_TX_METADATA in zero-copy path The zero-copy path reads TX metadata whenever the UMEM has metadata space, even if the descriptor does not set XDP_TX_METADATA. Pass descriptor options through the metadata helpers and ignore metadata unless the option is set. This does not fix the existing per-WQE metadata handling for mlx5 MPWQEs. Only the descriptor that starts a session passes through xsk_tx_metadata_request() and configures offload state shared by the batch. Metadata on descriptors joining an open session is therefore not validated and does not configure its requested offloads. In addition, a non-NULL metadata pointer from such a descriptor is treated as a timestamp completion request even when XDP_TXMD_FLAGS_TIMESTAMP is not set, so its metadata union can be overwritten with an unrequested timestamp. Fixing mixed metadata states within one MPWQE requires a separate change.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix NULL deref in NIX TM tree debugfs read path rvu_dbg_nix_tm_tree_display() dereferences pfvf->sq_ctx without checking whether the SQ context has been allocated. Reading /sys/kernel/debug/octeontx2/nix/tm_tree for a NIX LF whose transmit queues are not set up triggers a kernel oops. Guard the read path the same way rvu_dbg_nix_tm_tree_write() already does and return -EINVAL with a seq_file message when sq_ctx is NULL.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-vf: fix workqueue and netdev race in probe/remove Initialize the VF workqueue before register_netdev() so ndo_set_rx_mode does not queue work on a NULL workqueue. Unregister the netdev before destroying the workqueue, and add proper probe error cleanup.
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Only operate on Ethernet frames act_ife encapsulates/decapsulates the original Ethernet header and uses skb->dev->hard_header_len as the length of that header. That is only correct for Ethernet devices: on a device where hard_header_len does not match the L2 header that was actually pulled (PPP reports PPP_HDRLEN while nothing is stripped on ingress), the ingress skb_push()/skb_pull() use the wrong length and can hit skb_under_panic when headroom is tight. IFE is Ethernet-only by design - it builds an outer ethhdr, rewrites h_source/h_dest/h_proto, and calls eth_type_trans() on decode - so instead of trying to make the offsets work for arbitrary link types, simply drop packets that do not carry an Ethernet header. Checking skb->dev->type alone is not enough. We have to cater for a corner case where mirred can redirect an skb from a non-Ethernet device to an Ethernet one, and skb->dev then says nothing about the framing the skb actually has: an skb redirected from ppp0 reaches the target's ingress hook with mac_len 0 and no Ethernet header at all. So at ingress also require mac_len to be ETH_HLEN. On egress mac_len is not maintained, so the device type is all we have; a bogus redirect there yields a malformed frame rather than an out-of-bounds push, and it would be malformed with or without IFE. That corner case is not theoretical - redirecting from ppp0 into a veth that has an ife encode action on its ingress hook panics without this patch: skbuff: skb_under_panic: len:98 put:14 head:ffff88800e410000 data:ffff88800e40fff5 tail:0x57 end:0x640 dev:veth3 kernel BUG at net/core/skbuff.c:214! Call Trace: skb_push (net/core/skbuff.c:224 net/core/skbuff.c:2657) tcf_ife_act (net/sched/act_ife.c:829 net/sched/act_ife.c:874) tc_run (net/core/dev.c:4463) netif_receive_skb (net/core/dev.c:6463 net/core/dev.c:6522) tcf_mirred_to_dev (net/sched/act_mirred.c:248 net/sched/act_mirred.c:328) tcf_mirred_act (net/sched/act_mirred.c:489) tc_run (net/core/dev.c:4463) process_backlog (net/core/dev.c:6728) With Ethernet framing guaranteed, use ETH_HLEN instead of hard_header_len.
In the Linux kernel, the following vulnerability has been resolved: net: mana: Cap MSI-X vectors to the device MSI-X table size mana_gd_query_max_resources() sizes gc->num_msix_usable from resp.max_msix and the CPU count, but never from the device MSI-X table. On a 1792 vCPU M-series VM that yields 1793 while the table has 1024 entries, and mana_gd_setup_remaining_irqs() then walks indices 1..1792, running off the end of the region mapped by msix_map_region(): BUG: unable to handle page fault for address: ff8e347f8b99800c RIP: 0010:msix_prepare_msi_desc+0x7a/0x90 RAX: 0000000000004000 RBX: ff4330cb164ea780 RCX: ff8e347f8b998000 Call Trace: <TASK> __msi_domain_alloc_irqs+0x13a/0x440 msi_domain_alloc_irq_at+0x149/0x1b0 mana_gd_setup+0x351/0x890 mana_gd_probe+0x274/0x390 </TASK> RAX is index 1024 * PCI_MSIX_ENTRY_SIZE, one entry past the table. msi_insert_desc() does range check the index, but only against the MSI domain hwsize, which matches the table only for devices on an MSI parent domain. With a global PCI/MSI domain hwsize is MSI_XA_DOMAIN_SIZE, so nothing bounds the request. Cap num_msix_usable with pci_msix_vec_count().
In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in rds_cong_map_updated() rds_cong_map_updated() runs after a peer's congestion map has been rewritten (by rds_tcp_cong_recv() and rds_ib_cong_recv(), or the clear-all in the loopback and IB send-completion paths). It bumps rds_cong_generation and then checks waitqueue_active() on map->m_waitq and on rds_poll_waitq to decide whether anyone needs waking. atomic_inc() carries no ordering and waitqueue_active() is a plain load, so nothing orders the map and generation stores before the wait queue reads. The waiters do the mirror image: rds_cong_wait() adds itself to m_waitq and then tests the port bit, and rds_poll() registers on rds_poll_waitq and then reads the generation. That is the store-buffering pattern described above waitqueue_active() in include/linux/wait.h - the updater can observe an empty wait queue while the waiter still observes the port as congested, and no wake-up is issued. rds_cong_wait() is an interruptible sleep with no timeout, so a sender blocked on a congested port stays blocked until the next congestion update from that peer arrives or a signal is delivered. A poll() waiter misses the map-updated notification the same way. Use wq_has_sleeper(), which is waitqueue_active() preceded by the required full barrier, as rds_tcp_state_change() already does for the same pattern.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix NULL deref of af_xdp_zc_qidx on rep setup af_xdp_zc_qidx tracks receive queues using AF_XDP zero-copy and is allocated during PF/VF probe. Representors and other non-AF_XDP paths leave the pointer NULL, but several call sites used test_bit() on it unconditionally. Switching to devlink eswitch mode creates representors and runs otx2_init_hw_resources(), which reaches otx2_pool_aq_init() and oopses when dereferencing the NULL bitmap. Add NULL checks before every af_xdp_zc_qidx test_bit() use in the RSS, ethtool, XSK, and pool init paths.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix cn20k mailbox lifetime on repeated rvu_mbox_init() rvu_mbox_init() is called separately for AF-PF mailboxes during probe and for AF-VF mailboxes when SR-IOV is enabled. Each call used to allocate a new ng_rvu object, leaking the first allocation when the pointer was overwritten on the second call. Sharing one ng_rvu across both paths exposed several teardown bugs: the error path freed all cn20k mailbox DMA and kfree()d ng_rvu even when only the failing init type should be unwound, leaving live AF-PF mailbox memory in use after an AF-VF init failure. mutex_init() was also re-run on the AF-VF path while AF-PF mailbox handlers could still hold rvu->mbox_lock. Probe and SR-IOV failure paths did not release cn20k mailbox DMA either, since cleanup only happened in rvu_remove(). Allocate ng_rvu once with devm_kzalloc(), initialize mbox_lock in the same block, unwind only the mailbox memory for the failing init type, and free cn20k mailbox DMA from the probe and pci_enable_sriov() error paths.
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: fix length calculations and avoid invalid header warnings syzbot reported a warning in skb_network_header_len() triggered by tcf_skbmod_act(): !skb_transport_header_was_set(skb) WARNING: CPU: 0 PID: 14949 at include/linux/skbuff.h:3243 skb_network_header_len include/linux/skbuff.h:3243 [inline] WARNING: CPU: 0 PID: 14949 at net/sched/act_skbmod.c:55 tcf_skbmod_act+0xfe8/0x1810 net/sched/act_skbmod.c:55 There are a few issues in tcf_skbmod_act(): 1. Calling skb_network_header_len() assumes skb->transport_header is set, which is not guaranteed when tcf_skbmod_act() runs at TC ingress. 2. Unconditionally calling skb_mac_header_len() at the beginning of tcf_skbmod_act() triggers a warning on L3 devices (e.g. TUN) where the MAC header is unset, evaluating to an underflowed garbage length. 3. On TC ingress, skb->data points to the network header. Adding the MAC header length to the IP header length causes skb_ensure_writable() to request more bytes than the actual IP packet length, dropping valid short packets (e.g. 28-byte UDP/IPv4 packets). Fix these by: - Using skb_network_offset(skb) + sizeof(struct iphdr/ipv6hdr) for SKBMOD_F_ECN so that the required length is correctly calculated on both ingress (offset == 0) and egress (offset == mac_len). - Setting max_edit_len to ETH_HLEN for Ethernet header modifications after validating ARPHRD_ETHER.
In the Linux kernel, the following vulnerability has been resolved: net: fix a resource leak in copy_net_ns() error handling path Currently, preinit_net() does two things: (1) call ns_common_init() which might fail (2) initialize resources which does not fail However, preinit_net() is returning early when (1) fails, and copy_net_ns() is jumping to the dec_ucounts: label. As a result, resources allocated by net_alloc() are leaking. We need to call key_remove_domain() and net_passive_dec() in order to release resources allocated by net_alloc(). We cannot simply jump to the put_userns: label when preinit_net() failed, for (2) is not yet done. But we can reorder (1) and (2), for there is no dependency between (1) and (2). Therefore, this patch decouples (1) from preinit_net() and changes preinit_net() back to a void function, and calls ns_common_init() after preinit_net() succeeded. Then, we can jump to immediately after ns_common_free() of the put_userns: label.