Linux Kernel
Monthly
Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via. Rated high severity (CVSS 8.8). No vendor patch available.
Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via. Rated critical severity (CVSS 9.3), this vulnerability is low attack complexity. No vendor patch available.
Integer overflow or wraparound in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of. Rated low severity (CVSS 2.0). No vendor patch available.
Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable. Rated high severity (CVSS 8.8). No vendor patch available.
Integer overflow or wraparound in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable denial of service via. Rated high severity (CVSS 8.4), this vulnerability is low attack complexity. No vendor patch available.
Insufficient control flow management in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of. Rated high severity (CVSS 8.8). No vendor patch available.
Integer overflow or wraparound in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of. Rated high severity (CVSS 8.8). No vendor patch available.
Improper input validation in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege. Rated medium severity (CVSS 6.9). No vendor patch available.
Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable. Rated high severity (CVSS 8.6), this vulnerability is low attack complexity. No vendor patch available.
Linux kernel RAS (Reliability, Availability, Serviceability) header validation in the AMD GPU driver (amdgpu) lacks input sanitization, allowing a local authenticated attacker to trigger denial of service through excessive memory allocation when reading corrupted EEPROM data. The vulnerability affects all Linux kernel versions with the vulnerable amdgpu driver code path and requires local access with standard user privileges. No public exploit code has been identified; the EPSS score of 0.02% (5th percentile) indicates low real-world exploitation probability despite the moderate CVSS 5.5 rating.
A null pointer dereference vulnerability exists in the AMD display driver within the Linux kernel, where the dce_hwseq structure is accessed without proper null checking in the dce110_blank_stream function. The vulnerability affects Linux kernel versions up to 6.16-rc2 and could allow a local attacker with low privileges to cause a system crash or potentially execute arbitrary code with kernel privileges. With an EPSS score of only 0.02% and no known active exploitation, this represents a low real-world risk despite the high CVSS score.
CVE-2025-38348 is a buffer overflow vulnerability in the Linux kernel's p54 WiFi driver (wifi: p54) that allows a malicious or compromised USB device to trigger a memory overflow in the p54_rx_eeprom_readback() function by sending a crafted eeprom_readback message with an inflated length value. An attacker with local access and low privileges can cause denial of service or potentially execute code with kernel privileges; however, exploitation requires the device to first upload vendor firmware (proprietary and not widely distributed), which significantly limits real-world attack surface. The vulnerability is not currently tracked as actively exploited in CISA KEV catalog.
In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi operand cache leak in dswstate.c ACPICA commit 987a3b5cf7175916e2a4b6ea5b8e70f830dfe732 I found an ACPI cache leak in ACPI early termination and boot continuing case. When early termination occurs due to malicious ACPI table, Linux kernel terminates ACPI function and continues to boot process. While kernel terminates ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak. Boot log of ACPI operand cache leak is as follows: >[ 0.585957] ACPI: Added _OSI(Module Device) >[ 0.587218] ACPI: Added _OSI(Processor Device) >[ 0.588530] ACPI: Added _OSI(3.0 _SCP Extensions) >[ 0.589790] ACPI: Added _OSI(Processor Aggregator Device) >[ 0.591534] ACPI Error: Illegal I/O port address/length above 64K: C806E00000004002/0x2 (20170303/hwvalid-155) >[ 0.594351] ACPI Exception: AE_LIMIT, Unable to initialize fixed events (20170303/evevent-88) >[ 0.597858] ACPI: Unable to start the ACPI Interpreter >[ 0.599162] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) >[ 0.601836] kmem_cache_destroy Acpi-Operand: Slab cache still has objects >[ 0.603556] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc5 #26 >[ 0.605159] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 >[ 0.609177] Call Trace: >[ 0.610063] ? dump_stack+0x5c/0x81 >[ 0.611118] ? kmem_cache_destroy+0x1aa/0x1c0 >[ 0.612632] ? acpi_sleep_proc_init+0x27/0x27 >[ 0.613906] ? acpi_os_delete_cache+0xa/0x10 >[ 0.617986] ? acpi_ut_delete_caches+0x3f/0x7b >[ 0.619293] ? acpi_terminate+0xa/0x14 >[ 0.620394] ? acpi_init+0x2af/0x34f >[ 0.621616] ? __class_create+0x4c/0x80 >[ 0.623412] ? video_setup+0x7f/0x7f >[ 0.624585] ? acpi_sleep_proc_init+0x27/0x27 >[ 0.625861] ? do_one_initcall+0x4e/0x1a0 >[ 0.627513] ? kernel_init_freeable+0x19e/0x21f >[ 0.628972] ? rest_init+0x80/0x80 >[ 0.630043] ? kernel_init+0xa/0x100 >[ 0.631084] ? ret_from_fork+0x25/0x30 >[ 0.633343] vgaarb: loaded >[ 0.635036] EDAC MC: Ver: 3.0.0 >[ 0.638601] PCI: Probing PCI hardware >[ 0.639833] PCI host bridge to bus 0000:00 >[ 0.641031] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > ... Continue to boot and log is omitted ... I analyzed this memory leak in detail and found acpi_ds_obj_stack_pop_and_ delete() function miscalculated the top of the stack. acpi_ds_obj_stack_push() function uses walk_state->operand_index for start position of the top, but acpi_ds_obj_stack_pop_and_delete() function considers index 0 for it. Therefore, this causes acpi operand memory leak. This cache leak causes a security threat because an old kernel (<= 4.9) shows memory locations of kernel functions in stack dump. Some malicious users could use this information to neutralize kernel ASLR. I made a patch to fix ACPI operand cache leak.
In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi parse and parseext cache leaks ACPICA commit 8829e70e1360c81e7a5a901b5d4f48330e021ea5 I'm Seunghun Han, and I work for National Security Research Institute of South Korea. I have been doing a research on ACPI and found an ACPI cache leak in ACPI early abort cases. Boot log of ACPI cache leak is as follows: [ 0.352414] ACPI: Added _OSI(Module Device) [ 0.353182] ACPI: Added _OSI(Processor Device) [ 0.353182] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.353182] ACPI: Added _OSI(Processor Aggregator Device) [ 0.356028] ACPI: Unable to start the ACPI Interpreter [ 0.356799] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) [ 0.360215] kmem_cache_destroy Acpi-State: Slab cache still has objects [ 0.360648] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #10 [ 0.361273] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.361873] Call Trace: [ 0.362243] ? dump_stack+0x5c/0x81 [ 0.362591] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.362944] ? acpi_sleep_proc_init+0x27/0x27 [ 0.363296] ? acpi_os_delete_cache+0xa/0x10 [ 0.363646] ? acpi_ut_delete_caches+0x6d/0x7b [ 0.364000] ? acpi_terminate+0xa/0x14 [ 0.364000] ? acpi_init+0x2af/0x34f [ 0.364000] ? __class_create+0x4c/0x80 [ 0.364000] ? video_setup+0x7f/0x7f [ 0.364000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.364000] ? do_one_initcall+0x4e/0x1a0 [ 0.364000] ? kernel_init_freeable+0x189/0x20a [ 0.364000] ? rest_init+0xc0/0xc0 [ 0.364000] ? kernel_init+0xa/0x100 [ 0.364000] ? ret_from_fork+0x25/0x30 I analyzed this memory leak in detail. I found that “Acpi-State” cache and “Acpi-Parse” cache were merged because the size of cache objects was same slab cache size. I finally found “Acpi-Parse” cache and “Acpi-parse_ext” cache were leaked using SLAB_NEVER_MERGE flag in kmem_cache_create() function. Real ACPI cache leak point is as follows: [ 0.360101] ACPI: Added _OSI(Module Device) [ 0.360101] ACPI: Added _OSI(Processor Device) [ 0.360101] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361043] ACPI: Added _OSI(Processor Aggregator Device) [ 0.364016] ACPI: Unable to start the ACPI Interpreter [ 0.365061] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) [ 0.368174] kmem_cache_destroy Acpi-Parse: Slab cache still has objects [ 0.369332] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #8 [ 0.371256] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.372000] Call Trace: [ 0.372000] ? dump_stack+0x5c/0x81 [ 0.372000] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.372000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.372000] ? acpi_os_delete_cache+0xa/0x10 [ 0.372000] ? acpi_ut_delete_caches+0x56/0x7b [ 0.372000] ? acpi_terminate+0xa/0x14 [ 0.372000] ? acpi_init+0x2af/0x34f [ 0.372000] ? __class_create+0x4c/0x80 [ 0.372000] ? video_setup+0x7f/0x7f [ 0.372000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.372000] ? do_one_initcall+0x4e/0x1a0 [ 0.372000] ? kernel_init_freeable+0x189/0x20a [ 0.372000] ? rest_init+0xc0/0xc0 [ 0.372000] ? kernel_init+0xa/0x100 [ 0.372000] ? ret_from_fork+0x25/0x30 [ 0.388039] kmem_cache_destroy Acpi-parse_ext: Slab cache still has objects [ 0.389063] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #8 [ 0.390557] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.392000] Call Trace: [ 0.392000] ? dump_stack+0x5c/0x81 [ 0.392000] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.392000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.392000] ? acpi_os_delete_cache+0xa/0x10 [ 0.392000] ? acpi_ut_delete_caches+0x6d/0x7b [ 0.392000] ? acpi_terminate+0xa/0x14 [ 0.392000] ? acpi_init+0x2af/0x3 ---truncated---
CVE-2025-38340 is an out-of-bounds (OOB) memory read vulnerability in the Linux kernel's cs_dsp firmware module, specifically within the cs_dsp_mock_bin_add_name_or_info() KUnit test function. The vulnerability occurs when source string length is incorrectly rounded up during memory allocation, causing KASAN to detect out-of-bounds access. Local unprivileged users (PR:L) can trigger this vulnerability to read sensitive kernel memory, potentially disclosing confidential information or causing denial of service. This is a test/kernel development vulnerability with limited real-world impact as it resides in KUnit test code rather than production firmware paths.
CVE-2025-38338 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: jbd2: fix data-race and null-ptr-deref in jbd2_journal_dirty_metadata() Since handle->h_transaction may be a NULL pointer, so we should change it to call is_handle_aborted(handle) first before dereferencing it. And the following data-race was reported in my fuzzer: ================================================================== BUG: KCSAN: data-race in jbd2_journal_dirty_metadata / jbd2_journal_dirty_metadata write to 0xffff888011024104 of 4 bytes by task 10881 on cpu 1: jbd2_journal_dirty_metadata+0x2a5/0x770 fs/jbd2/transaction.c:1556 __ext4_handle_dirty_metadata+0xe7/0x4b0 fs/ext4/ext4_jbd2.c:358 ext4_do_update_inode fs/ext4/inode.c:5220 [inline] ext4_mark_iloc_dirty+0x32c/0xd50 fs/ext4/inode.c:5869 __ext4_mark_inode_dirty+0xe1/0x450 fs/ext4/inode.c:6074 ext4_dirty_inode+0x98/0xc0 fs/ext4/inode.c:6103 .... read to 0xffff888011024104 of 4 bytes by task 10880 on cpu 0: jbd2_journal_dirty_metadata+0xf2/0x770 fs/jbd2/transaction.c:1512 __ext4_handle_dirty_metadata+0xe7/0x4b0 fs/ext4/ext4_jbd2.c:358 ext4_do_update_inode fs/ext4/inode.c:5220 [inline] ext4_mark_iloc_dirty+0x32c/0xd50 fs/ext4/inode.c:5869 __ext4_mark_inode_dirty+0xe1/0x450 fs/ext4/inode.c:6074 ext4_dirty_inode+0x98/0xc0 fs/ext4/inode.c:6103 .... value changed: 0x00000000 -> 0x00000001 ================================================================== This issue is caused by missing data-race annotation for jh->b_modified. Therefore, the missing annotation needs to be added.
A remote code execution vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in hard irq context, but the input_event() takes a spin_lock, which isn't allowed there as it is converted to a rt_spin_lock(). [ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0 ... [ 4054.290195] __might_resched+0x13c/0x1f4 [ 4054.290209] rt_spin_lock+0x54/0x11c [ 4054.290219] input_event+0x48/0x80 [ 4054.290230] gpio_keys_irq_timer+0x4c/0x78 [ 4054.290243] __hrtimer_run_queues+0x1a4/0x438 [ 4054.290257] hrtimer_interrupt+0xe4/0x240 [ 4054.290269] arch_timer_handler_phys+0x2c/0x44 [ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c [ 4054.290297] handle_irq_desc+0x40/0x58 [ 4054.290307] generic_handle_domain_irq+0x1c/0x28 [ 4054.290316] gic_handle_irq+0x44/0xcc Considering the gpio_keys_irq_isr() can run in any context, e.g. it can be threaded, it seems there's no point in requesting the timer isr to run in hard irq context. Relax the hrtimer not to use the hard context.
In the Linux kernel, the following vulnerability has been resolved: x86/sgx: Prevent attempts to reclaim poisoned pages TL;DR: SGX page reclaim touches the page to copy its contents to secondary storage. SGX instructions do not gracefully handle machine checks. Despite this, the existing SGX code will try to reclaim pages that it _knows_ are poisoned. Avoid even trying to reclaim poisoned pages. The longer story: Pages used by an enclave only get epc_page->poison set in arch_memory_failure() but they currently stay on sgx_active_page_list until sgx_encl_release(), with the SGX_EPC_PAGE_RECLAIMER_TRACKED flag untouched. epc_page->poison is not checked in the reclaimer logic meaning that, if other conditions are met, an attempt will be made to reclaim an EPC page that was poisoned. This is bad because 1. we don't want that page to end up added to another enclave and 2. it is likely to cause one core to shut down and the kernel to panic. Specifically, reclaiming uses microcode operations including "EWB" which accesses the EPC page contents to encrypt and write them out to non-SGX memory. Those operations cannot handle MCEs in their accesses other than by putting the executing core into a special shutdown state (affecting both threads with HT.) The kernel will subsequently panic on the remaining cores seeing the core didn't enter MCE handler(s) in time. Call sgx_unmark_page_reclaimable() to remove the affected EPC page from sgx_active_page_list on memory error to stop it being considered for reclaiming. Testing epc_page->poison in sgx_reclaim_pages() would also work but I assume it's better to add code in the less likely paths. The affected EPC page is not added to &node->sgx_poison_page_list until later in sgx_encl_release()->sgx_free_epc_page() when it is EREMOVEd. Membership on other lists doesn't change to avoid changing any of the lists' semantics except for sgx_active_page_list. There's a "TBD" comment in arch_memory_failure() about pre-emptive actions, the goal here is not to address everything that it may imply. This also doesn't completely close the time window when a memory error notification will be fatal (for a not previously poisoned EPC page) -- the MCE can happen after sgx_reclaim_pages() has selected its candidates or even *inside* a microcode operation (actually easy to trigger due to the amount of time spent in them.) The spinlock in sgx_unmark_page_reclaimable() is safe because memory_failure() runs in process context and no spinlocks are held, explicitly noted in a mm/memory-failure.c comment.
CVE-2025-38332 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38330 is an out-of-bounds memory read vulnerability in the Linux kernel's cs_dsp firmware driver, specifically within KUnit test code for control cache initialization. The vulnerability allows a local attacker with low privileges to read sensitive kernel memory, potentially leading to information disclosure and denial of service. This is a kernel testing/development issue rather than a production runtime vulnerability, with no evidence of active exploitation in the wild.
CVE-2025-38329 is an out-of-bounds (OOB) memory read vulnerability in the Linux kernel's cs_dsp (Cirrus Logic DSP) firmware module, specifically within KUnit test code handling WMFW (Wolfson Microcontroller Firmware) info structures. The vulnerability occurs when source string length is incorrectly rounded up to allocation size, allowing local attackers with low privileges to read sensitive kernel memory, potentially disclosing cryptographic material or other sensitive data. While confined to test code rather than production kernel paths, this represents a real information disclosure risk for systems with KUnit testing enabled or during development/debug kernels.
In the Linux kernel, the following vulnerability has been resolved: jffs2: check jffs2_prealloc_raw_node_refs() result in few other places Fuzzing hit another invalid pointer dereference due to the lack of checking whether jffs2_prealloc_raw_node_refs() completed successfully. Subsequent logic implies that the node refs have been allocated. Handle that. The code is ready for propagating the error upwards. KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 5835 Comm: syz-executor145 Not tainted 5.10.234-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:jffs2_link_node_ref+0xac/0x690 fs/jffs2/nodelist.c:600 Call Trace: jffs2_mark_erased_block fs/jffs2/erase.c:460 [inline] jffs2_erase_pending_blocks+0x688/0x1860 fs/jffs2/erase.c:118 jffs2_garbage_collect_pass+0x638/0x1a00 fs/jffs2/gc.c:253 jffs2_reserve_space+0x3f4/0xad0 fs/jffs2/nodemgmt.c:167 jffs2_write_inode_range+0x246/0xb50 fs/jffs2/write.c:362 jffs2_write_end+0x712/0x1110 fs/jffs2/file.c:302 generic_perform_write+0x2c2/0x500 mm/filemap.c:3347 __generic_file_write_iter+0x252/0x610 mm/filemap.c:3465 generic_file_write_iter+0xdb/0x230 mm/filemap.c:3497 call_write_iter include/linux/fs.h:2039 [inline] do_iter_readv_writev+0x46d/0x750 fs/read_write.c:740 do_iter_write+0x18c/0x710 fs/read_write.c:866 vfs_writev+0x1db/0x6a0 fs/read_write.c:939 do_pwritev fs/read_write.c:1036 [inline] __do_sys_pwritev fs/read_write.c:1083 [inline] __se_sys_pwritev fs/read_write.c:1078 [inline] __x64_sys_pwritev+0x235/0x310 fs/read_write.c:1078 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
CVE-2025-38327 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38326 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38324 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38323 is a use-after-free vulnerability in the Linux kernel's ATM LEC (LAN Emulation Client) subsystem that allows a local unprivileged user to read or write kernel memory, potentially achieving privilege escalation. The vulnerability exists in net/atm/lec.c where error paths in lecd_attach() can leave dangling pointers in the dev_lec[] array, enabling access to freed memory. This is a local privilege escalation with CVSS 7.8 (High) requiring local access but no user interaction.
CVE-2025-38320 is a security vulnerability (CVSS 7.1). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/pp: Fix potential NULL pointer dereference in atomctrl_initialize_mc_reg_table The function atomctrl_initialize_mc_reg_table() and atomctrl_initialize_mc_reg_table_v2_2() does not check the return value of smu_atom_get_data_table(). If smu_atom_get_data_table() fails to retrieve vram_info, it returns NULL which is later dereferenced.
CVE-2025-38318 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: avoid NULL pointer dereference in mt7996_set_monitor() The function mt7996_set_monitor() dereferences phy before the NULL sanity check. Fix this to avoid NULL pointer dereference by moving the dereference after the check.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Check dsbr size from EFI variable Since the size of struct btintel_dsbr is already known, we can just start there instead of querying the EFI variable size. If the final result doesn't match what we expect also fail. This fixes a stack buffer overflow when the EFI variable is larger than struct btintel_dsbr.
CVE-2025-38313 is a double-free memory corruption vulnerability in the Linux kernel's FSL Management Complex (fsl-mc) bus driver that allows a local attacker with low privileges to cause denial of service or potential code execution. The vulnerability affects Linux kernel versions where the MC device allocation error path incorrectly frees memory twice when a DPRC (Data Path Resource Container) device is involved. This is not currently listed as actively exploited in KEV databases, but the high CVSS score (7.8) and local attack vector make it a moderate priority for systems using FSL-MC enabled hardware.
In the Linux kernel, the following vulnerability has been resolved: iavf: get rid of the crit lock Get rid of the crit lock. That frees us from the error prone logic of try_locks. Thanks to netdev_lock() by Jakub it is now easy, and in most cases we were protected by it already - replace crit lock by netdev lock when it was not the case. Lockdep reports that we should cancel the work under crit_lock [splat1], and that was the scheme we have mostly followed since [1] by Slawomir. But when that is done we still got into deadlocks [splat2]. So instead we should look at the bigger problem, namely "weird locking/scheduling" of the iavf. The first step to fix that is to remove the crit lock. I will followup with a -next series that simplifies scheduling/tasks. Cancel the work without netdev lock (weird unlock+lock scheme), to fix the [splat2] (which would be totally ugly if we would kept the crit lock). Extend protected part of iavf_watchdog_task() to include scheduling more work. Note that the removed comment in iavf_reset_task() was misplaced, it belonged to inside of the removed if condition, so it's gone now. [splat1] - w/o this patch - The deadlock during VF removal: WARNING: possible circular locking dependency detected sh/3825 is trying to acquire lock: ((work_completion)(&(&adapter->watchdog_task)->work)){+.+.}-{0:0}, at: start_flush_work+0x1a1/0x470 but task is already holding lock: (&adapter->crit_lock){+.+.}-{4:4}, at: iavf_remove+0xd1/0x690 [iavf] which lock already depends on the new lock. [splat2] - when cancelling work under crit lock, w/o this series, see [2] for the band aid attempt WARNING: possible circular locking dependency detected sh/3550 is trying to acquire lock: ((wq_completion)iavf){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: (&dev->lock){+.+.}-{4:4}, at: iavf_remove+0xa6/0x6e0 [iavf] which lock already depends on the new lock. [1] fc2e6b3b132a ("iavf: Rework mutexes for better synchronisation") [2] https://github.com/pkitszel/linux/commit/52dddbfc2bb60294083f5711a158a
CVE-2025-38310 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: move xe_svm_init() earlier In xe_vm_close_and_put() we need to be able to call xe_svm_fini(), however during vm creation we can call this on the error path, before having actually initialised the svm state, leading to various splats followed by a fatal NPD. (cherry picked from commit 4f296d77cf49fcb5f90b4674123ad7f3a0676165)
In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw Search result of avs_dai_find_path_template() shall be verified before being used. As 'template' is already known when avs_hw_constraints_init() is fired, drop the search entirely.
In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Verify content returned by parse_int_array() The first element of the returned array stores its length. If it is 0, any manipulation beyond the element at index 0 ends with null-ptr-deref.
CVE-2025-38305 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix NULL pointer deference on eir_get_service_data The len parameter is considered optional so it can be NULL so it cannot be used for skipping to next entry of EIR_SERVICE_DATA.
In the Linux kernel, the following vulnerability has been resolved: block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work Bios queued up in the zone write plug have already gone through all all preparation in the submit_bio path, including the freeze protection. Submitting them through submit_bio_noacct_nocheck duplicates the work and can can cause deadlocks when freezing a queue with pending bio write plugs. Go straight to ->submit_bio or blk_mq_submit_bio to bypass the superfluous extra freeze protection and checks.
In the Linux kernel, the following vulnerability has been resolved: nvmem: zynqmp_nvmem: unbreak driver after cleanup Commit 29be47fcd6a0 ("nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup") changed the driver to expect the device pointer to be passed as the "context", but in nvmem the context parameter comes from nvmem_config.priv which is never set - Leading to null pointer exceptions when the device is accessed.
In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare() Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare(): 1] If dma_map_sg() fails for areq->dst, the device driver would try to free DMA memory it has not allocated in the first place. To fix this, on the "theend_sgs" error path, call dma unmap only if the corresponding dma map was successful. 2] If the dma_map_single() call for the IV fails, the device driver would try to free an invalid DMA memory address on the "theend_iv" path: ------------[ cut here ]------------ DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90 Modules linked in: skcipher_example(O+) CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT Tainted: [O]=OOT_MODULE Hardware name: OrangePi Zero2 (DT) pc : check_unmap+0x123c/0x1b90 lr : check_unmap+0x123c/0x1b90 ... Call trace: check_unmap+0x123c/0x1b90 (P) debug_dma_unmap_page+0xac/0xc0 dma_unmap_page_attrs+0x1f4/0x5fc sun8i_ce_cipher_do_one+0x1bd4/0x1f40 crypto_pump_work+0x334/0x6e0 kthread_worker_fn+0x21c/0x438 kthread+0x374/0x664 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- To fix this, check for !dma_mapping_error() before calling dma_unmap_single() on the "theend_iv" path.
CVE-2025-38298 is a general protection fault vulnerability in the Linux kernel's EDAC/skx_common module caused by failure to reset the 'adxl_component_count' variable during module unload/reload cycles. This affects users running i10nm_edac or skx_edac_common on Intel Xeon systems, allowing local attackers with low privileges to trigger a kernel crash or potential code execution through error injection testing or normal module lifecycle operations. The vulnerability has a CVSS score of 7.8 (high severity) but appears to be a reliability/denial-of-service issue rather than actively exploited in the wild.
In the Linux kernel, the following vulnerability has been resolved: PM: EM: Fix potential division-by-zero error in em_compute_costs() When the device is of a non-CPU type, table[i].performance won't be initialized in the previous em_init_performance(), resulting in division by zero when calculating costs in em_compute_costs(). Since the 'cost' algorithm is only used for EAS energy efficiency calculations and is currently not utilized by other device drivers, we should add the _is_cpu_device(dev) check to prevent this division-by-zero issue.
CVE-2025-38296 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38295 is a kernel preemption context violation in the Amlogic DDR PMU driver where smp_processor_id() is called in a preemptible context, causing kernel warnings and potential system instability. This affects Linux kernel users with Amlogic SoC-based systems (e.g., ODROID-N2Plus) when the meson_ddr_pmu module is loaded. While the vulnerability allows a local unprivileged user to trigger kernel warnings and potentially cause denial of service, there is no evidence of active exploitation or public POC, and the fix involves a simple API replacement from smp_processor_id() to raw_smp_processor_id().
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL access in assign channel context handler Currently, when ath12k_mac_assign_vif_to_vdev() fails, the radio handle (ar) gets accessed from the link VIF handle (arvif) for debug logging, This is incorrect. In the fail scenario, radio handle is NULL. Fix the NULL access, avoid radio handle access by moving to the hardware debug logging helper function (ath12k_hw_warn). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
CVE-2025-38289 is a use-after-free vulnerability in the Linux kernel's lpfc (Emulex/Broadcom Fibre Channel) driver that occurs in the dev_loss_tmo_callbk function during driver unload or fatal error handling. A local privileged attacker can exploit this to achieve arbitrary code execution with high confidentiality, integrity, and availability impact. There is no evidence of active exploitation in the wild or public proof-of-concept code at this time, but the vulnerability represents a real kernel memory safety issue requiring prompt patching.
CVE-2025-38288 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
CVE-2025-38286 is an out-of-bounds array access vulnerability in the Linux kernel's AT91 GPIO pinctrl driver caused by insufficient validation of device tree alias values during probe. A local attacker with low privileges can trigger an out-of-bounds read or write to the gpio_chips array, potentially leading to information disclosure or denial of service. The vulnerability affects Linux kernel versions with the vulnerable at91_gpio_probe() function and is not currently listed in CISA KEV, indicating limited evidence of active exploitation.
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: configure manual DAC mode via PCI config API only To support 36-bit DMA, configure chip proprietary bit via PCI config API or chip DBI interface. However, the PCI device mmap isn't set yet and the DBI is also inaccessible via mmap, so only if the bit can be accessible via PCI config API, chip can support 36-bit DMA. Otherwise, fallback to 32-bit DMA. With NULL mmap address, kernel throws trace: BUG: unable to handle page fault for address: 0000000000001090 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 71 Comm: irq/26-pciehp Tainted: G OE 6.14.2-061402-generic #202504101348 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE RIP: 0010:rtw89_pci_ops_write16+0x12/0x30 [rtw89_pci] RSP: 0018:ffffb0ffc0acf9d8 EFLAGS: 00010206 RAX: ffffffffc158f9c0 RBX: ffff94865e702020 RCX: 0000000000000000 RDX: 0000000000000718 RSI: 0000000000001090 RDI: ffff94865e702020 RBP: ffffb0ffc0acf9d8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000015 R13: 0000000000000719 R14: ffffb0ffc0acfa1f R15: ffffffffc1813060 FS: 0000000000000000(0000) GS:ffff9486f3480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001090 CR3: 0000000090440001 CR4: 00000000000626f0 Call Trace: <TASK> rtw89_pci_read_config_byte+0x6d/0x120 [rtw89_pci] rtw89_pci_cfg_dac+0x5b/0xb0 [rtw89_pci] rtw89_pci_probe+0xa96/0xbd0 [rtw89_pci] ? __pfx___device_attach_driver+0x10/0x10 ? __pfx___device_attach_driver+0x10/0x10 local_pci_probe+0x47/0xa0 pci_call_probe+0x5d/0x190 pci_device_probe+0xa7/0x160 really_probe+0xf9/0x370 ? pm_runtime_barrier+0x55/0xa0 __driver_probe_device+0x8c/0x140 driver_probe_device+0x24/0xd0 __device_attach_driver+0xcd/0x170 bus_for_each_drv+0x99/0x100 __device_attach+0xb4/0x1d0 device_attach+0x10/0x20 pci_bus_add_device+0x59/0x90 pci_bus_add_devices+0x31/0x80 pciehp_configure_device+0xaa/0x170 pciehp_enable_slot+0xd6/0x240 pciehp_handle_presence_or_link_change+0xf1/0x180 pciehp_ist+0x162/0x1c0 irq_thread_fn+0x24/0x70 irq_thread+0xef/0x1c0 ? __pfx_irq_thread_fn+0x10/0x10 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xfc/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x47/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>
CVE-2025-38282 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Add NULL check in mt7996_thermal_init devm_kasprintf() can return a NULL pointer on failure,but this returned value in mt7996_thermal_init() is not checked. Add NULL check in mt7996_thermal_init(), to handle kernel NULL pointer dereference error.
CVE-2025-38279 is a kernel verifier bug in Linux BPF (Berkeley Packet Filter) subsystem where improper handling of stack pointer register (r10) in precision backtracking causes a WARNING and EFAULT return during eBPF program verification. This affects unprivileged users on Linux systems with BPF enabled; an attacker with local access and BPF capabilities can trigger a kernel warning and denial of service by loading a specially crafted eBPF program. No active exploitation in the wild is confirmed, but a proof-of-concept test case is provided in the patch commit.
In the Linux kernel, the following vulnerability has been resolved: mtd: nand: ecc-mxic: Fix use of uninitialized variable ret If ctx->steps is zero, the loop processing ECC steps is skipped, and the variable ret remains uninitialized. It is later checked and returned, which leads to undefined behavior and may cause unpredictable results in user space or kernel crashes. This scenario can be triggered in edge cases such as misconfigured geometry, ECC engine misuse, or if ctx->steps is not validated after initialization. Initialize ret to zero before the loop to ensure correct and safe behavior regardless of the ctx->steps value. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug The qmp_usb_iomap() helper function currently returns the raw result of devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return a NULL pointer and the caller only checks error pointers with IS_ERR(), NULL could bypass the check and lead to an invalid dereference. Fix the issue by checking if devm_ioremap() returns NULL. When it does, qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM), ensuring safe and consistent error handling.
In the Linux kernel, the following vulnerability has been resolved: fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt() fpga_mgr_test_img_load_sgt() allocates memory for sgt using kunit_kzalloc() however it does not check if the allocation failed. It then passes sgt to sg_alloc_table(), which passes it to __sg_alloc_table(). This function calls memset() on sgt in an attempt to zero it out. If the allocation fails then sgt will be NULL and the memset will trigger a NULL pointer dereference. Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL().
CVE-2025-38272 is a security vulnerability (CVSS 5.5) that allows eee. Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: net: prevent a NULL deref in rtnl_create_link() At the time rtnl_create_link() is running, dev->netdev_ops is NULL, we must not use netdev_lock_ops() or risk a NULL deref if CONFIG_NET_SHAPER is defined. Use netif_set_group() instead of dev_set_group(). RIP: 0010:netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] RIP: 0010:netdev_lock_ops include/net/netdev_lock.h:41 [inline] RIP: 0010:dev_set_group+0xc0/0x230 net/core/dev_api.c:82 Call Trace: <TASK> rtnl_create_link+0x748/0xd10 net/core/rtnetlink.c:3674 rtnl_newlink_create+0x25c/0xb00 net/core/rtnetlink.c:3813 __rtnl_newlink net/core/rtnetlink.c:3940 [inline] rtnl_newlink+0x16d6/0x1c70 net/core/rtnetlink.c:4055 rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6944 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2534 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x75b/0x8d0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline]
In the Linux kernel, the following vulnerability has been resolved: btrfs: exit after state insertion failure at btrfs_convert_extent_bit() If insert_state() state failed it returns an error pointer and we call extent_io_tree_panic() which will trigger a BUG() call. However if CONFIG_BUG is disabled, which is an uncommon and exotic scenario, then we fallthrough and call cache_state() which will dereference the error pointer, resulting in an invalid memory access. So jump to the 'out' label after calling extent_io_tree_panic(), it also makes the code more clear besides dealing with the exotic scenario where CONFIG_BUG is disabled.
In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: move tcpm_queue_vdm_unlocked to asynchronous work A state check was previously added to tcpm_queue_vdm_unlocked to prevent a deadlock where the DisplayPort Alt Mode driver would be executing work and attempting to grab the tcpm_lock while the TCPM was holding the lock and attempting to unregister the altmode, blocking on the altmode driver's cancel_work_sync call. Because the state check isn't protected, there is a small window where the Alt Mode driver could determine that the TCPM is in a ready state and attempt to grab the lock while the TCPM grabs the lock and changes the TCPM state to one that causes the deadlock. The callstack is provided below: [110121.667392][ C7] Call trace: [110121.667396][ C7] __switch_to+0x174/0x338 [110121.667406][ C7] __schedule+0x608/0x9f0 [110121.667414][ C7] schedule+0x7c/0xe8 [110121.667423][ C7] kernfs_drain+0xb0/0x114 [110121.667431][ C7] __kernfs_remove+0x16c/0x20c [110121.667436][ C7] kernfs_remove_by_name_ns+0x74/0xe8 [110121.667442][ C7] sysfs_remove_group+0x84/0xe8 [110121.667450][ C7] sysfs_remove_groups+0x34/0x58 [110121.667458][ C7] device_remove_groups+0x10/0x20 [110121.667464][ C7] device_release_driver_internal+0x164/0x2e4 [110121.667475][ C7] device_release_driver+0x18/0x28 [110121.667484][ C7] bus_remove_device+0xec/0x118 [110121.667491][ C7] device_del+0x1e8/0x4ac [110121.667498][ C7] device_unregister+0x18/0x38 [110121.667504][ C7] typec_unregister_altmode+0x30/0x44 [110121.667515][ C7] tcpm_reset_port+0xac/0x370 [110121.667523][ C7] tcpm_snk_detach+0x84/0xb8 [110121.667529][ C7] run_state_machine+0x4c0/0x1b68 [110121.667536][ C7] tcpm_state_machine_work+0x94/0xe4 [110121.667544][ C7] kthread_worker_fn+0x10c/0x244 [110121.667552][ C7] kthread+0x104/0x1d4 [110121.667557][ C7] ret_from_fork+0x10/0x20 [110121.667689][ C7] Workqueue: events dp_altmode_work [110121.667697][ C7] Call trace: [110121.667701][ C7] __switch_to+0x174/0x338 [110121.667710][ C7] __schedule+0x608/0x9f0 [110121.667717][ C7] schedule+0x7c/0xe8 [110121.667725][ C7] schedule_preempt_disabled+0x24/0x40 [110121.667733][ C7] __mutex_lock+0x408/0xdac [110121.667741][ C7] __mutex_lock_slowpath+0x14/0x24 [110121.667748][ C7] mutex_lock+0x40/0xec [110121.667757][ C7] tcpm_altmode_enter+0x78/0xb4 [110121.667764][ C7] typec_altmode_enter+0xdc/0x10c [110121.667769][ C7] dp_altmode_work+0x68/0x164 [110121.667775][ C7] process_one_work+0x1e4/0x43c [110121.667783][ C7] worker_thread+0x25c/0x430 [110121.667789][ C7] kthread+0x104/0x1d4 [110121.667794][ C7] ret_from_fork+0x10/0x20 Change tcpm_queue_vdm_unlocked to queue for tcpm_queue_vdm_work, which can perform the state check while holding the TCPM lock while the Alt Mode lock is no longer held. This requires a new struct to hold the vdm data, altmode_vdm_event.
CVE-2025-38267 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: serial: jsm: fix NPE during jsm_uart_port_init No device was set which caused serial_base_ctrl_add to crash. BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1 Debian 6.12.25-1 RIP: 0010:serial_base_ctrl_add+0x96/0x120 Call Trace: <TASK> serial_core_register_port+0x1a0/0x580 ? __setup_irq+0x39c/0x660 ? __kmalloc_cache_noprof+0x111/0x310 jsm_uart_port_init+0xe8/0x180 [jsm] jsm_probe_one+0x1f4/0x410 [jsm] local_pci_probe+0x42/0x90 pci_device_probe+0x22f/0x270 really_probe+0xdb/0x340 ? pm_runtime_barrier+0x54/0x90 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8c/0xe0 bus_add_driver+0x112/0x1f0 driver_register+0x72/0xd0 jsm_init_module+0x36/0xff0 [jsm] ? __pfx_jsm_init_module+0x10/0x10 [jsm] do_one_initcall+0x58/0x310 do_init_module+0x60/0x230 Tested with Digi Neo PCIe 8 port card.
In the Linux kernel, the following vulnerability has been resolved: bcache: fix NULL pointer in cache_set_flush() 1. LINE#1794 - LINE#1887 is some codes about function of bch_cache_set_alloc(). 2. LINE#2078 - LINE#2142 is some codes about function of register_cache_set(). 3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098. 1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb) 1795 { ... 1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) || 1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) || 1862 mempool_init_kmalloc_pool(&c->bio_meta, 2, 1863 sizeof(struct bbio) + sizeof(struct bio_vec) * 1864 bucket_pages(c)) || 1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) || 1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio), 1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) || 1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) || 1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc", 1870 WQ_MEM_RECLAIM, 0)) || 1871 bch_journal_alloc(c) || 1872 bch_btree_cache_alloc(c) || 1873 bch_open_buckets_alloc(c) || 1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages))) 1875 goto err; ^^^^^^^^ 1876 ... 1883 return c; 1884 err: 1885 bch_cache_set_unregister(c); ^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1886 return NULL; 1887 } ... 2078 static const char *register_cache_set(struct cache *ca) 2079 { ... 2098 c = bch_cache_set_alloc(&ca->sb); 2099 if (!c) 2100 return err; ^^^^^^^^^^ ... 2128 ca->set = c; 2129 ca->set->cache[ca->sb.nr_this_dev] = ca; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ... 2138 return NULL; 2139 err: 2140 bch_cache_set_unregister(c); 2141 return err; 2142 } (1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and call bch_cache_set_unregister()(LINE#1885). (2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return. (3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the value to c->cache[], it means that c->cache[] is NULL. LINE#1624 - LINE#1665 is some codes about function of cache_set_flush(). As (1), in LINE#1885 call bch_cache_set_unregister() ---> bch_cache_set_stop() ---> closure_queue() -.-> cache_set_flush() (as below LINE#1624) 1624 static void cache_set_flush(struct closure *cl) 1625 { ... 1654 for_each_cache(ca, c, i) 1655 if (ca->alloc_thread) ^^ 1656 kthread_stop(ca->alloc_thread); ... 1665 } (4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the kernel crash occurred as below: [ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory [ 846.713242] bcache: register_bcache() error : failed to register device [ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered [ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8 [ 846.714790] PGD 0 P4D 0 [ 846.715129] Oops: 0000 [#1] SMP PTI [ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1 [ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018 [ 846.716451] Workqueue: events cache_set_flush [bcache] [ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache] [ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 0 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: btrfs: handle csum tree error with rescue=ibadroots correctly [BUG] There is syzbot based reproducer that can crash the kernel, with the following call trace: (With some debug output added) DEBUG: rescue=ibadroots parsed BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010) BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8 BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm BTRFS info (device loop0): using free-space-tree BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0 DEBUG: read tree root path failed for tree csum, ret=-5 BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0 BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0 process 'repro' launched './file2' with NULL argv: empty string added DEBUG: no csum root, idatacsums=0 ibadroots=134217728 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs] Call Trace: <TASK> btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs] btrfs_submit_bbio+0x43e/0x1a80 [btrfs] submit_one_bio+0xde/0x160 [btrfs] btrfs_readahead+0x498/0x6a0 [btrfs] read_pages+0x1c3/0xb20 page_cache_ra_order+0x4b5/0xc20 filemap_get_pages+0x2d3/0x19e0 filemap_read+0x314/0xde0 __kernel_read+0x35b/0x900 bprm_execve+0x62e/0x1140 do_execveat_common.isra.0+0x3fc/0x520 __x64_sys_execveat+0xdc/0x130 do_syscall_64+0x54/0x1d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ---[ end trace 0000000000000000 ]--- [CAUSE] Firstly the fs has a corrupted csum tree root, thus to mount the fs we have to go "ro,rescue=ibadroots" mount option. Normally with that mount option, a bad csum tree root should set BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will ignore csum search. But in this particular case, we have the following call trace that caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS: load_global_roots_objectid(): ret = btrfs_search_slot(); /* Succeeded */ btrfs_item_key_to_cpu() found = true; /* We found the root item for csum tree. */ root = read_tree_root_path(); if (IS_ERR(root)) { if (!btrfs_test_opt(fs_info, IGNOREBADROOTS)) /* * Since we have rescue=ibadroots mount option, * @ret is still 0. */ break; if (!found || ret) { /* @found is true, @ret is 0, error handling for csum * tree is skipped. */ } This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if the csum tree is corrupted, which results unexpected later csum lookup. [FIX] If read_tree_root_path() failed, always populate @ret to the error number. As at the end of the function, we need @ret to determine if we need to do the extra error handling for csum tree.
In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9335: Fix missing free of regulator supplies Driver gets and enables all regulator supplies in probe path (wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup in final error paths and in unbind (missing remove() callback). This leads to leaked memory and unbalanced regulator enable count during probe errors or unbind. Fix this by converting entire code into devm_regulator_bulk_get_enable() which also greatly simplifies the code.
In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write memcg_path_store() assigns a newly allocated memory buffer to filter->memcg_path, without deallocating the previously allocated and assigned memory buffer. As a result, users can leak kernel memory by continuously writing a data to memcg_path DAMOS sysfs file. Fix the leak by deallocating the previously set memory buffer.
CVE-2025-38256 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: lib/group_cpus: fix NULL pointer dereference from group_cpus_evenly() While testing null_blk with configfs, echo 0 > poll_queues will trigger following panic: BUG: kernel NULL pointer dereference, address: 0000000000000010 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 27 UID: 0 PID: 920 Comm: bash Not tainted 6.15.0-02023-gadbdb95c8696-dirty #1238 PREEMPT(undef) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__bitmap_or+0x48/0x70 Call Trace: <TASK> __group_cpus_evenly+0x822/0x8c0 group_cpus_evenly+0x2d9/0x490 blk_mq_map_queues+0x1e/0x110 null_map_queues+0xc9/0x170 [null_blk] blk_mq_update_queue_map+0xdb/0x160 blk_mq_update_nr_hw_queues+0x22b/0x560 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_poll_queues_store+0xa4/0x130 [null_blk] configfs_write_iter+0x109/0x1d0 vfs_write+0x26e/0x6f0 ksys_write+0x79/0x180 __x64_sys_write+0x1d/0x30 x64_sys_call+0x45c4/0x45f0 do_syscall_64+0xa5/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e Root cause is that numgrps is set to 0, and ZERO_SIZE_PTR is returned from kcalloc(), and later ZERO_SIZE_PTR will be deferenced. Fix the problem by checking numgrps first in group_cpus_evenly(), and return NULL directly if numgrps is zero. [yukuai3@huawei.com: also fix the non-SMP version]
CVE-2025-38254 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: atm: clip: prevent NULL deref in clip_push() Blamed commit missed that vcc_destroy_socket() calls clip_push() with a NULL skb. If clip_devs is NULL, clip_push() then crashes when reading skb->truesize.
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3() In snd_usb_get_audioformat_uac3(), the length value returned from snd_usb_ctl_msg() is used directly for memory allocation without validation. This length is controlled by the USB device. The allocated buffer is cast to a uac3_cluster_header_descriptor and its fields are accessed without verifying that the buffer is large enough. If the device returns a smaller than expected length, this leads to an out-of-bounds read. Add a length check to ensure the buffer is large enough for uac3_cluster_header_descriptor.
CVE-2025-38247 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38245 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid inode pointer dereferences during log replay In a few places where we call read_one_inode(), if we get a NULL pointer we end up jumping into an error path, or fallthrough in case of __add_inode_ref(), where we then do something like this: iput(&inode->vfs_inode); which results in an invalid inode pointer that triggers an invalid memory access, resulting in a crash. Fix this by making sure we don't do such dereferences.
In the Linux kernel, the following vulnerability has been resolved: mm/shmem, swap: fix softlockup with mTHP swapin Following softlockup can be easily reproduced on my test machine with: echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device mkdir -p /sys/fs/cgroup/memory/test echo 1G > /sys/fs/cgroup/test/memory.max echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs while true; do dd if=/dev/zero of=/tmp/test.img bs=1M count=5120 cat /tmp/test.img > /dev/null rm /tmp/test.img done Then after a while: watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787] Modules linked in: zram virtiofs CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G L 6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)· Tainted: [L]=SOFTLOCKUP Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015 RIP: 0010:mpol_shared_policy_lookup+0xd/0x70 Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8 RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202 RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001 RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518 RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001 R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000 FS: 00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> shmem_alloc_folio+0x31/0xc0 shmem_swapin_folio+0x309/0xcf0 ? filemap_get_entry+0x117/0x1e0 ? xas_load+0xd/0xb0 ? filemap_get_entry+0x101/0x1e0 shmem_get_folio_gfp+0x2ed/0x5b0 shmem_file_read_iter+0x7f/0x2e0 vfs_read+0x252/0x330 ksys_read+0x68/0xf0 do_syscall_64+0x4c/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f03f9a46991 Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991 RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003 RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000 </TASK> The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in conflict with it, so swapcache_prepare fails and causes shmem_swap_alloc_folio to return -EEXIST, and shmem simply retries again and again causing this loop. Fix it by applying a similar fix for anon mTHP swapin. The performance change is very slight, time of swapin 10g zero folios with shmem (test for 12 times): Before: 2.47s After: 2.48s [kasong@tencent.com: add comment]
CVE-2025-38235 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In version 4.5.0, using a specially crafted tee-supplicant binary running in REE userspace, an attacker can trigger a panic in a TA that uses the libutee Secure Storage API. Many functions in libutee, specifically those which make up the Secure Storage API, will panic if a system call returns an unexpected return code. This behavior is mandated by the TEE Internal Core API specification. However, in OP-TEE’s implementation, return codes of secure storage operations are passed through unsanitized from the REE tee-supplicant, through the Linux kernel tee-driver, through the OP-TEE kernel, back to libutee. Thus, an attacker with access to REE userspace, and the ability to stop tee-supplicant and replace it with their own process (generally trivial for a root user, and depending on the way permissions are set up, potentially available even to less privileged users) can run a malicious tee-supplicant process that responds to storage requests with unexpected response codes, triggering a panic in the requesting TA. This is particularly dangerous for TAs built with `TA_FLAG_SINGLE_INSTANCE` (corresponding to `gpd.ta.singleInstance` and `TA_FLAG_INSTANCE_KEEP_ALIVE` (corresponding to `gpd.ta.keepAlive`). The behavior of these TAs may depend on memory that is preserved between sessions, and the ability of an attacker to panic the TA and reload it with a clean memory space can compromise the behavior of those TAs. A critical example of this is the optee_ftpm TA. It uses the kept alive memory to hold PCR values, which crucially must be non-resettable. An attacker who can trigger a panic in the fTPM TA can reset the PCRs, and then extend them PCRs with whatever they choose, falsifying boot measurements, accessing sealed data, and potentially more. The impact of this issue depends significantly on the behavior of affected TAs. For some, it could manifest as a denial of service, while for others, like the fTPM TA, it can result in the disclosure of sensitive data. Anyone running the fTPM TA is affected, but similar attacks may be possible on other TAs that leverage the Secure Storage API. A fix is available in commit 941a58d78c99c4754fbd4ec3079ec9e1d596af8f.
In the Linux kernel, the following vulnerability has been resolved: media: cxusb: no longer judge rbuf when the write fails syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the Linux kernel, the following vulnerability has been resolved: media: imagination: fix a potential memory leak in e5010_probe() Add video_device_release() to release the memory allocated by video_device_alloc() if something goes wrong.
In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Cleanup after an allocation error When allocation failures are not cleaned up by the driver, further allocation errors will be false-positives, which will cause buffers to remain uninitialized and cause NULL pointer dereferences. Ensure proper cleanup of failed allocations to prevent these issues.
In the Linux kernel, the following vulnerability has been resolved: ceph: avoid kernel BUG for encrypted inode with unaligned file size The generic/397 test hits a BUG_ON for the case of encrypted inode with unaligned file size (for example, 33K or 1K): [ 877.737811] run fstests generic/397 at 2025-01-03 12:34:40 [ 877.875761] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.876130] libceph: client4614 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 877.991965] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.992334] libceph: client4617 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.017234] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.017594] libceph: client4620 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.031394] xfs_io (pid 18988) is setting deprecated v1 encryption policy; recommend upgrading to v2. [ 878.054528] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.054892] libceph: client4623 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.070287] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.070704] libceph: client4626 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.264586] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.265258] libceph: client4629 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.374578] -----------[ cut here ]------------ [ 878.374586] kernel BUG at net/ceph/messenger.c:1070! [ 878.375150] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 878.378145] CPU: 2 UID: 0 PID: 4759 Comm: kworker/2:9 Not tainted 6.13.0-rc5+ #1 [ 878.378969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 878.380167] Workqueue: ceph-msgr ceph_con_workfn [ 878.381639] RIP: 0010:ceph_msg_data_cursor_init+0x42/0x50 [ 878.382152] Code: 89 17 48 8b 46 70 55 48 89 47 08 c7 47 18 00 00 00 00 48 89 e5 e8 de cc ff ff 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 0f 0b <0f> 0b 0f 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 [ 878.383928] RSP: 0018:ffffb4ffc7cbbd28 EFLAGS: 00010287 [ 878.384447] RAX: ffffffff82bb9ac0 RBX: ffff981390c2f1f8 RCX: 0000000000000000 [ 878.385129] RDX: 0000000000009000 RSI: ffff981288232b58 RDI: ffff981390c2f378 [ 878.385839] RBP: ffffb4ffc7cbbe18 R08: 0000000000000000 R09: 0000000000000000 [ 878.386539] R10: 0000000000000000 R11: 0000000000000000 R12: ffff981390c2f030 [ 878.387203] R13: ffff981288232b58 R14: 0000000000000029 R15: 0000000000000001 [ 878.387877] FS: 0000000000000000(0000) GS:ffff9814b7900000(0000) knlGS:0000000000000000 [ 878.388663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 878.389212] CR2: 00005e106a0554e0 CR3: 0000000112bf0001 CR4: 0000000000772ef0 [ 878.389921] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 878.390620] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 878.391307] PKRU: 55555554 [ 878.391567] Call Trace: [ 878.391807] <TASK> [ 878.392021] ? show_regs+0x71/0x90 [ 878.392391] ? die+0x38/0xa0 [ 878.392667] ? do_trap+0xdb/0x100 [ 878.392981] ? do_error_trap+0x75/0xb0 [ 878.393372] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.393842] ? exc_invalid_op+0x53/0x80 [ 878.394232] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.394694] ? asm_exc_invalid_op+0x1b/0x20 [ 878.395099] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.395583] ? ceph_con_v2_try_read+0xd16/0x2220 [ 878.396027] ? _raw_spin_unlock+0xe/0x40 [ 878.396428] ? raw_spin_rq_unlock+0x10/0x40 [ 878.396842] ? finish_task_switch.isra.0+0x97/0x310 [ 878.397338] ? __schedule+0x44b/0x16b0 [ 878.397738] ceph_con_workfn+0x326/0x750 [ 878.398121] process_one_work+0x188/0x3d0 [ 878.398522] ? __pfx_worker_thread+0x10/0x10 [ 878.398929] worker_thread+0x2b5/0x3c0 [ 878.399310] ? __pfx_worker_thread+0x10/0x10 [ 878.399727] kthread+0xe1/0x120 [ 878.400031] ? __pfx_kthread+0x10/0x10 [ 878.400431] ret_from_fork+0x43/0x70 [ 878.400771] ? __pfx_kthread+0x10/0x10 [ 878.401127] ret_from_fork_asm+0x1a/0x30 [ 878.401543] </TASK> [ 878.401760] Modules l ---truncated---
In the Linux kernel, the following vulnerability has been resolved: ext4: fix out of bounds punch offset Punching a hole with a start offset that exceeds max_end is not permitted and will result in a negative length in the truncate_inode_partial_folio() function while truncating the page cache, potentially leading to undesirable consequences. A simple reproducer: truncate -s 9895604649994 /mnt/foo xfs_io -c "pwrite 8796093022208 4096" /mnt/foo xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo kernel BUG at include/linux/highmem.h:275! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110 RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287 RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000 RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000 RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000 R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005 R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000 FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> truncate_inode_partial_folio+0x3dd/0x620 truncate_inode_pages_range+0x226/0x720 ? bdev_getblk+0x52/0x3e0 ? ext4_get_group_desc+0x78/0x150 ? crc32c_arch+0xfd/0x180 ? __ext4_get_inode_loc+0x18c/0x840 ? ext4_inode_csum+0x117/0x160 ? jbd2_journal_dirty_metadata+0x61/0x390 ? __ext4_handle_dirty_metadata+0xa0/0x2b0 ? kmem_cache_free+0x90/0x5a0 ? jbd2_journal_stop+0x1d5/0x550 ? __ext4_journal_stop+0x49/0x100 truncate_pagecache_range+0x50/0x80 ext4_truncate_page_cache_block_range+0x57/0x3a0 ext4_punch_hole+0x1fe/0x670 ext4_fallocate+0x792/0x17d0 ? __count_memcg_events+0x175/0x2a0 vfs_fallocate+0x121/0x560 ksys_fallocate+0x51/0xc0 __x64_sys_fallocate+0x24/0x40 x64_sys_call+0x18d2/0x4170 do_syscall_64+0xa7/0x220 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by filtering out cases where the punching start offset exceeds max_end.
In the Linux kernel, the following vulnerability has been resolved: ext4: only dirty folios when data journaling regular files fstest generic/388 occasionally reproduces a crash that looks as follows: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ext4_block_zero_page_range+0x30c/0x380 [ext4] ext4_truncate+0x436/0x440 [ext4] ext4_process_orphan+0x5d/0x110 [ext4] ext4_orphan_cleanup+0x124/0x4f0 [ext4] ext4_fill_super+0x262d/0x3110 [ext4] get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x26/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4ed/0x6b0 do_syscall_64+0x82/0x170 ... This occurs when processing a symlink inode from the orphan list. The partial block zeroing code in the truncate path calls ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an a_ops vector in ext4, hence the crash. To avoid this problem, update the ext4_dirty_journalled_data() helper to only mark the folio dirty on regular files (for which a_ops is assigned). This also matches the journaling logic in the ext4_symlink() creation path, where ext4_handle_dirty_metadata() is called directly.
CVE-2025-38219 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: hwmon: (ftsteutates) Fix TOCTOU race in fts_read() In the fts_read() function, when handling hwmon_pwm_auto_channels_temp, the code accesses the shared variable data->fan_source[channel] twice without holding any locks. It is first checked against FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again when used as an argument to the BIT() macro. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition. Another thread executing fts_update_device() can modify the value of data->fan_source[channel] between the check and its use. If the value is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the BIT() macro will be called with a large shift value (BIT(255)). A bit shift by a value greater than or equal to the type width is undefined behavior and can lead to a crash or incorrect values being returned to userspace. Fix this by reading data->fan_source[channel] into a local variable once, eliminating the race condition. Additionally, add a bounds check to ensure the value is less than BITS_PER_LONG before passing it to the BIT() macro, making the code more robust against undefined behavior. This possible bug was found by an experimental static analysis tool developed by our team.
In the Linux kernel, the following vulnerability has been resolved: configfs-tsm-report: Fix NULL dereference of tsm_ops Unlike sysfs, the lifetime of configfs objects is controlled by userspace. There is no mechanism for the kernel to find and delete all created config-items. Instead, the configfs-tsm-report mechanism has an expectation that tsm_unregister() can happen at any time and cause established config-item access to start failing. That expectation is not fully satisfied. While tsm_report_read(), tsm_report_{is,is_bin}_visible(), and tsm_report_make_item() safely fail if tsm_ops have been unregistered, tsm_report_privlevel_store() tsm_report_provider_show() fail to check for ops registration. Add the missing checks for tsm_ops having been removed. Now, in supporting the ability for tsm_unregister() to always succeed, it leaves the problem of what to do with lingering config-items. The expectation is that the admin that arranges for the ->remove() (unbind) of the ${tsm_arch}-guest driver is also responsible for deletion of all open config-items. Until that deletion happens, ->probe() (reload / bind) of the ${tsm_arch}-guest driver fails. This allows for emergency shutdown / revocation of attestation interfaces, and requires coordinated restart.
In the Linux kernel, the following vulnerability has been resolved: smb: client: add NULL check in automount_fullpath page is checked for null in __build_path_from_dentry_optional_prefix when tcon->origin_fullpath is not set. However, the check is missing when it is set. Add a check to prevent a potential NULL pointer dereference.
Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via. Rated high severity (CVSS 8.8). No vendor patch available.
Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via. Rated critical severity (CVSS 9.3), this vulnerability is low attack complexity. No vendor patch available.
Integer overflow or wraparound in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of. Rated low severity (CVSS 2.0). No vendor patch available.
Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable. Rated high severity (CVSS 8.8). No vendor patch available.
Integer overflow or wraparound in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable denial of service via. Rated high severity (CVSS 8.4), this vulnerability is low attack complexity. No vendor patch available.
Insufficient control flow management in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of. Rated high severity (CVSS 8.8). No vendor patch available.
Integer overflow or wraparound in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of. Rated high severity (CVSS 8.8). No vendor patch available.
Improper input validation in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege. Rated medium severity (CVSS 6.9). No vendor patch available.
Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable. Rated high severity (CVSS 8.6), this vulnerability is low attack complexity. No vendor patch available.
Linux kernel RAS (Reliability, Availability, Serviceability) header validation in the AMD GPU driver (amdgpu) lacks input sanitization, allowing a local authenticated attacker to trigger denial of service through excessive memory allocation when reading corrupted EEPROM data. The vulnerability affects all Linux kernel versions with the vulnerable amdgpu driver code path and requires local access with standard user privileges. No public exploit code has been identified; the EPSS score of 0.02% (5th percentile) indicates low real-world exploitation probability despite the moderate CVSS 5.5 rating.
A null pointer dereference vulnerability exists in the AMD display driver within the Linux kernel, where the dce_hwseq structure is accessed without proper null checking in the dce110_blank_stream function. The vulnerability affects Linux kernel versions up to 6.16-rc2 and could allow a local attacker with low privileges to cause a system crash or potentially execute arbitrary code with kernel privileges. With an EPSS score of only 0.02% and no known active exploitation, this represents a low real-world risk despite the high CVSS score.
CVE-2025-38348 is a buffer overflow vulnerability in the Linux kernel's p54 WiFi driver (wifi: p54) that allows a malicious or compromised USB device to trigger a memory overflow in the p54_rx_eeprom_readback() function by sending a crafted eeprom_readback message with an inflated length value. An attacker with local access and low privileges can cause denial of service or potentially execute code with kernel privileges; however, exploitation requires the device to first upload vendor firmware (proprietary and not widely distributed), which significantly limits real-world attack surface. The vulnerability is not currently tracked as actively exploited in CISA KEV catalog.
In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi operand cache leak in dswstate.c ACPICA commit 987a3b5cf7175916e2a4b6ea5b8e70f830dfe732 I found an ACPI cache leak in ACPI early termination and boot continuing case. When early termination occurs due to malicious ACPI table, Linux kernel terminates ACPI function and continues to boot process. While kernel terminates ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak. Boot log of ACPI operand cache leak is as follows: >[ 0.585957] ACPI: Added _OSI(Module Device) >[ 0.587218] ACPI: Added _OSI(Processor Device) >[ 0.588530] ACPI: Added _OSI(3.0 _SCP Extensions) >[ 0.589790] ACPI: Added _OSI(Processor Aggregator Device) >[ 0.591534] ACPI Error: Illegal I/O port address/length above 64K: C806E00000004002/0x2 (20170303/hwvalid-155) >[ 0.594351] ACPI Exception: AE_LIMIT, Unable to initialize fixed events (20170303/evevent-88) >[ 0.597858] ACPI: Unable to start the ACPI Interpreter >[ 0.599162] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) >[ 0.601836] kmem_cache_destroy Acpi-Operand: Slab cache still has objects >[ 0.603556] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc5 #26 >[ 0.605159] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 >[ 0.609177] Call Trace: >[ 0.610063] ? dump_stack+0x5c/0x81 >[ 0.611118] ? kmem_cache_destroy+0x1aa/0x1c0 >[ 0.612632] ? acpi_sleep_proc_init+0x27/0x27 >[ 0.613906] ? acpi_os_delete_cache+0xa/0x10 >[ 0.617986] ? acpi_ut_delete_caches+0x3f/0x7b >[ 0.619293] ? acpi_terminate+0xa/0x14 >[ 0.620394] ? acpi_init+0x2af/0x34f >[ 0.621616] ? __class_create+0x4c/0x80 >[ 0.623412] ? video_setup+0x7f/0x7f >[ 0.624585] ? acpi_sleep_proc_init+0x27/0x27 >[ 0.625861] ? do_one_initcall+0x4e/0x1a0 >[ 0.627513] ? kernel_init_freeable+0x19e/0x21f >[ 0.628972] ? rest_init+0x80/0x80 >[ 0.630043] ? kernel_init+0xa/0x100 >[ 0.631084] ? ret_from_fork+0x25/0x30 >[ 0.633343] vgaarb: loaded >[ 0.635036] EDAC MC: Ver: 3.0.0 >[ 0.638601] PCI: Probing PCI hardware >[ 0.639833] PCI host bridge to bus 0000:00 >[ 0.641031] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > ... Continue to boot and log is omitted ... I analyzed this memory leak in detail and found acpi_ds_obj_stack_pop_and_ delete() function miscalculated the top of the stack. acpi_ds_obj_stack_push() function uses walk_state->operand_index for start position of the top, but acpi_ds_obj_stack_pop_and_delete() function considers index 0 for it. Therefore, this causes acpi operand memory leak. This cache leak causes a security threat because an old kernel (<= 4.9) shows memory locations of kernel functions in stack dump. Some malicious users could use this information to neutralize kernel ASLR. I made a patch to fix ACPI operand cache leak.
In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi parse and parseext cache leaks ACPICA commit 8829e70e1360c81e7a5a901b5d4f48330e021ea5 I'm Seunghun Han, and I work for National Security Research Institute of South Korea. I have been doing a research on ACPI and found an ACPI cache leak in ACPI early abort cases. Boot log of ACPI cache leak is as follows: [ 0.352414] ACPI: Added _OSI(Module Device) [ 0.353182] ACPI: Added _OSI(Processor Device) [ 0.353182] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.353182] ACPI: Added _OSI(Processor Aggregator Device) [ 0.356028] ACPI: Unable to start the ACPI Interpreter [ 0.356799] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) [ 0.360215] kmem_cache_destroy Acpi-State: Slab cache still has objects [ 0.360648] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #10 [ 0.361273] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.361873] Call Trace: [ 0.362243] ? dump_stack+0x5c/0x81 [ 0.362591] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.362944] ? acpi_sleep_proc_init+0x27/0x27 [ 0.363296] ? acpi_os_delete_cache+0xa/0x10 [ 0.363646] ? acpi_ut_delete_caches+0x6d/0x7b [ 0.364000] ? acpi_terminate+0xa/0x14 [ 0.364000] ? acpi_init+0x2af/0x34f [ 0.364000] ? __class_create+0x4c/0x80 [ 0.364000] ? video_setup+0x7f/0x7f [ 0.364000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.364000] ? do_one_initcall+0x4e/0x1a0 [ 0.364000] ? kernel_init_freeable+0x189/0x20a [ 0.364000] ? rest_init+0xc0/0xc0 [ 0.364000] ? kernel_init+0xa/0x100 [ 0.364000] ? ret_from_fork+0x25/0x30 I analyzed this memory leak in detail. I found that “Acpi-State” cache and “Acpi-Parse” cache were merged because the size of cache objects was same slab cache size. I finally found “Acpi-Parse” cache and “Acpi-parse_ext” cache were leaked using SLAB_NEVER_MERGE flag in kmem_cache_create() function. Real ACPI cache leak point is as follows: [ 0.360101] ACPI: Added _OSI(Module Device) [ 0.360101] ACPI: Added _OSI(Processor Device) [ 0.360101] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361043] ACPI: Added _OSI(Processor Aggregator Device) [ 0.364016] ACPI: Unable to start the ACPI Interpreter [ 0.365061] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) [ 0.368174] kmem_cache_destroy Acpi-Parse: Slab cache still has objects [ 0.369332] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #8 [ 0.371256] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.372000] Call Trace: [ 0.372000] ? dump_stack+0x5c/0x81 [ 0.372000] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.372000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.372000] ? acpi_os_delete_cache+0xa/0x10 [ 0.372000] ? acpi_ut_delete_caches+0x56/0x7b [ 0.372000] ? acpi_terminate+0xa/0x14 [ 0.372000] ? acpi_init+0x2af/0x34f [ 0.372000] ? __class_create+0x4c/0x80 [ 0.372000] ? video_setup+0x7f/0x7f [ 0.372000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.372000] ? do_one_initcall+0x4e/0x1a0 [ 0.372000] ? kernel_init_freeable+0x189/0x20a [ 0.372000] ? rest_init+0xc0/0xc0 [ 0.372000] ? kernel_init+0xa/0x100 [ 0.372000] ? ret_from_fork+0x25/0x30 [ 0.388039] kmem_cache_destroy Acpi-parse_ext: Slab cache still has objects [ 0.389063] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #8 [ 0.390557] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.392000] Call Trace: [ 0.392000] ? dump_stack+0x5c/0x81 [ 0.392000] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.392000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.392000] ? acpi_os_delete_cache+0xa/0x10 [ 0.392000] ? acpi_ut_delete_caches+0x6d/0x7b [ 0.392000] ? acpi_terminate+0xa/0x14 [ 0.392000] ? acpi_init+0x2af/0x3 ---truncated---
CVE-2025-38340 is an out-of-bounds (OOB) memory read vulnerability in the Linux kernel's cs_dsp firmware module, specifically within the cs_dsp_mock_bin_add_name_or_info() KUnit test function. The vulnerability occurs when source string length is incorrectly rounded up during memory allocation, causing KASAN to detect out-of-bounds access. Local unprivileged users (PR:L) can trigger this vulnerability to read sensitive kernel memory, potentially disclosing confidential information or causing denial of service. This is a test/kernel development vulnerability with limited real-world impact as it resides in KUnit test code rather than production firmware paths.
CVE-2025-38338 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: jbd2: fix data-race and null-ptr-deref in jbd2_journal_dirty_metadata() Since handle->h_transaction may be a NULL pointer, so we should change it to call is_handle_aborted(handle) first before dereferencing it. And the following data-race was reported in my fuzzer: ================================================================== BUG: KCSAN: data-race in jbd2_journal_dirty_metadata / jbd2_journal_dirty_metadata write to 0xffff888011024104 of 4 bytes by task 10881 on cpu 1: jbd2_journal_dirty_metadata+0x2a5/0x770 fs/jbd2/transaction.c:1556 __ext4_handle_dirty_metadata+0xe7/0x4b0 fs/ext4/ext4_jbd2.c:358 ext4_do_update_inode fs/ext4/inode.c:5220 [inline] ext4_mark_iloc_dirty+0x32c/0xd50 fs/ext4/inode.c:5869 __ext4_mark_inode_dirty+0xe1/0x450 fs/ext4/inode.c:6074 ext4_dirty_inode+0x98/0xc0 fs/ext4/inode.c:6103 .... read to 0xffff888011024104 of 4 bytes by task 10880 on cpu 0: jbd2_journal_dirty_metadata+0xf2/0x770 fs/jbd2/transaction.c:1512 __ext4_handle_dirty_metadata+0xe7/0x4b0 fs/ext4/ext4_jbd2.c:358 ext4_do_update_inode fs/ext4/inode.c:5220 [inline] ext4_mark_iloc_dirty+0x32c/0xd50 fs/ext4/inode.c:5869 __ext4_mark_inode_dirty+0xe1/0x450 fs/ext4/inode.c:6074 ext4_dirty_inode+0x98/0xc0 fs/ext4/inode.c:6103 .... value changed: 0x00000000 -> 0x00000001 ================================================================== This issue is caused by missing data-race annotation for jh->b_modified. Therefore, the missing annotation needs to be added.
A remote code execution vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in hard irq context, but the input_event() takes a spin_lock, which isn't allowed there as it is converted to a rt_spin_lock(). [ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0 ... [ 4054.290195] __might_resched+0x13c/0x1f4 [ 4054.290209] rt_spin_lock+0x54/0x11c [ 4054.290219] input_event+0x48/0x80 [ 4054.290230] gpio_keys_irq_timer+0x4c/0x78 [ 4054.290243] __hrtimer_run_queues+0x1a4/0x438 [ 4054.290257] hrtimer_interrupt+0xe4/0x240 [ 4054.290269] arch_timer_handler_phys+0x2c/0x44 [ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c [ 4054.290297] handle_irq_desc+0x40/0x58 [ 4054.290307] generic_handle_domain_irq+0x1c/0x28 [ 4054.290316] gic_handle_irq+0x44/0xcc Considering the gpio_keys_irq_isr() can run in any context, e.g. it can be threaded, it seems there's no point in requesting the timer isr to run in hard irq context. Relax the hrtimer not to use the hard context.
In the Linux kernel, the following vulnerability has been resolved: x86/sgx: Prevent attempts to reclaim poisoned pages TL;DR: SGX page reclaim touches the page to copy its contents to secondary storage. SGX instructions do not gracefully handle machine checks. Despite this, the existing SGX code will try to reclaim pages that it _knows_ are poisoned. Avoid even trying to reclaim poisoned pages. The longer story: Pages used by an enclave only get epc_page->poison set in arch_memory_failure() but they currently stay on sgx_active_page_list until sgx_encl_release(), with the SGX_EPC_PAGE_RECLAIMER_TRACKED flag untouched. epc_page->poison is not checked in the reclaimer logic meaning that, if other conditions are met, an attempt will be made to reclaim an EPC page that was poisoned. This is bad because 1. we don't want that page to end up added to another enclave and 2. it is likely to cause one core to shut down and the kernel to panic. Specifically, reclaiming uses microcode operations including "EWB" which accesses the EPC page contents to encrypt and write them out to non-SGX memory. Those operations cannot handle MCEs in their accesses other than by putting the executing core into a special shutdown state (affecting both threads with HT.) The kernel will subsequently panic on the remaining cores seeing the core didn't enter MCE handler(s) in time. Call sgx_unmark_page_reclaimable() to remove the affected EPC page from sgx_active_page_list on memory error to stop it being considered for reclaiming. Testing epc_page->poison in sgx_reclaim_pages() would also work but I assume it's better to add code in the less likely paths. The affected EPC page is not added to &node->sgx_poison_page_list until later in sgx_encl_release()->sgx_free_epc_page() when it is EREMOVEd. Membership on other lists doesn't change to avoid changing any of the lists' semantics except for sgx_active_page_list. There's a "TBD" comment in arch_memory_failure() about pre-emptive actions, the goal here is not to address everything that it may imply. This also doesn't completely close the time window when a memory error notification will be fatal (for a not previously poisoned EPC page) -- the MCE can happen after sgx_reclaim_pages() has selected its candidates or even *inside* a microcode operation (actually easy to trigger due to the amount of time spent in them.) The spinlock in sgx_unmark_page_reclaimable() is safe because memory_failure() runs in process context and no spinlocks are held, explicitly noted in a mm/memory-failure.c comment.
CVE-2025-38332 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38330 is an out-of-bounds memory read vulnerability in the Linux kernel's cs_dsp firmware driver, specifically within KUnit test code for control cache initialization. The vulnerability allows a local attacker with low privileges to read sensitive kernel memory, potentially leading to information disclosure and denial of service. This is a kernel testing/development issue rather than a production runtime vulnerability, with no evidence of active exploitation in the wild.
CVE-2025-38329 is an out-of-bounds (OOB) memory read vulnerability in the Linux kernel's cs_dsp (Cirrus Logic DSP) firmware module, specifically within KUnit test code handling WMFW (Wolfson Microcontroller Firmware) info structures. The vulnerability occurs when source string length is incorrectly rounded up to allocation size, allowing local attackers with low privileges to read sensitive kernel memory, potentially disclosing cryptographic material or other sensitive data. While confined to test code rather than production kernel paths, this represents a real information disclosure risk for systems with KUnit testing enabled or during development/debug kernels.
In the Linux kernel, the following vulnerability has been resolved: jffs2: check jffs2_prealloc_raw_node_refs() result in few other places Fuzzing hit another invalid pointer dereference due to the lack of checking whether jffs2_prealloc_raw_node_refs() completed successfully. Subsequent logic implies that the node refs have been allocated. Handle that. The code is ready for propagating the error upwards. KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 5835 Comm: syz-executor145 Not tainted 5.10.234-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:jffs2_link_node_ref+0xac/0x690 fs/jffs2/nodelist.c:600 Call Trace: jffs2_mark_erased_block fs/jffs2/erase.c:460 [inline] jffs2_erase_pending_blocks+0x688/0x1860 fs/jffs2/erase.c:118 jffs2_garbage_collect_pass+0x638/0x1a00 fs/jffs2/gc.c:253 jffs2_reserve_space+0x3f4/0xad0 fs/jffs2/nodemgmt.c:167 jffs2_write_inode_range+0x246/0xb50 fs/jffs2/write.c:362 jffs2_write_end+0x712/0x1110 fs/jffs2/file.c:302 generic_perform_write+0x2c2/0x500 mm/filemap.c:3347 __generic_file_write_iter+0x252/0x610 mm/filemap.c:3465 generic_file_write_iter+0xdb/0x230 mm/filemap.c:3497 call_write_iter include/linux/fs.h:2039 [inline] do_iter_readv_writev+0x46d/0x750 fs/read_write.c:740 do_iter_write+0x18c/0x710 fs/read_write.c:866 vfs_writev+0x1db/0x6a0 fs/read_write.c:939 do_pwritev fs/read_write.c:1036 [inline] __do_sys_pwritev fs/read_write.c:1083 [inline] __se_sys_pwritev fs/read_write.c:1078 [inline] __x64_sys_pwritev+0x235/0x310 fs/read_write.c:1078 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
CVE-2025-38327 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38326 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38324 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38323 is a use-after-free vulnerability in the Linux kernel's ATM LEC (LAN Emulation Client) subsystem that allows a local unprivileged user to read or write kernel memory, potentially achieving privilege escalation. The vulnerability exists in net/atm/lec.c where error paths in lecd_attach() can leave dangling pointers in the dev_lec[] array, enabling access to freed memory. This is a local privilege escalation with CVSS 7.8 (High) requiring local access but no user interaction.
CVE-2025-38320 is a security vulnerability (CVSS 7.1). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/pp: Fix potential NULL pointer dereference in atomctrl_initialize_mc_reg_table The function atomctrl_initialize_mc_reg_table() and atomctrl_initialize_mc_reg_table_v2_2() does not check the return value of smu_atom_get_data_table(). If smu_atom_get_data_table() fails to retrieve vram_info, it returns NULL which is later dereferenced.
CVE-2025-38318 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: avoid NULL pointer dereference in mt7996_set_monitor() The function mt7996_set_monitor() dereferences phy before the NULL sanity check. Fix this to avoid NULL pointer dereference by moving the dereference after the check.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Check dsbr size from EFI variable Since the size of struct btintel_dsbr is already known, we can just start there instead of querying the EFI variable size. If the final result doesn't match what we expect also fail. This fixes a stack buffer overflow when the EFI variable is larger than struct btintel_dsbr.
CVE-2025-38313 is a double-free memory corruption vulnerability in the Linux kernel's FSL Management Complex (fsl-mc) bus driver that allows a local attacker with low privileges to cause denial of service or potential code execution. The vulnerability affects Linux kernel versions where the MC device allocation error path incorrectly frees memory twice when a DPRC (Data Path Resource Container) device is involved. This is not currently listed as actively exploited in KEV databases, but the high CVSS score (7.8) and local attack vector make it a moderate priority for systems using FSL-MC enabled hardware.
In the Linux kernel, the following vulnerability has been resolved: iavf: get rid of the crit lock Get rid of the crit lock. That frees us from the error prone logic of try_locks. Thanks to netdev_lock() by Jakub it is now easy, and in most cases we were protected by it already - replace crit lock by netdev lock when it was not the case. Lockdep reports that we should cancel the work under crit_lock [splat1], and that was the scheme we have mostly followed since [1] by Slawomir. But when that is done we still got into deadlocks [splat2]. So instead we should look at the bigger problem, namely "weird locking/scheduling" of the iavf. The first step to fix that is to remove the crit lock. I will followup with a -next series that simplifies scheduling/tasks. Cancel the work without netdev lock (weird unlock+lock scheme), to fix the [splat2] (which would be totally ugly if we would kept the crit lock). Extend protected part of iavf_watchdog_task() to include scheduling more work. Note that the removed comment in iavf_reset_task() was misplaced, it belonged to inside of the removed if condition, so it's gone now. [splat1] - w/o this patch - The deadlock during VF removal: WARNING: possible circular locking dependency detected sh/3825 is trying to acquire lock: ((work_completion)(&(&adapter->watchdog_task)->work)){+.+.}-{0:0}, at: start_flush_work+0x1a1/0x470 but task is already holding lock: (&adapter->crit_lock){+.+.}-{4:4}, at: iavf_remove+0xd1/0x690 [iavf] which lock already depends on the new lock. [splat2] - when cancelling work under crit lock, w/o this series, see [2] for the band aid attempt WARNING: possible circular locking dependency detected sh/3550 is trying to acquire lock: ((wq_completion)iavf){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: (&dev->lock){+.+.}-{4:4}, at: iavf_remove+0xa6/0x6e0 [iavf] which lock already depends on the new lock. [1] fc2e6b3b132a ("iavf: Rework mutexes for better synchronisation") [2] https://github.com/pkitszel/linux/commit/52dddbfc2bb60294083f5711a158a
CVE-2025-38310 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: move xe_svm_init() earlier In xe_vm_close_and_put() we need to be able to call xe_svm_fini(), however during vm creation we can call this on the error path, before having actually initialised the svm state, leading to various splats followed by a fatal NPD. (cherry picked from commit 4f296d77cf49fcb5f90b4674123ad7f3a0676165)
In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw Search result of avs_dai_find_path_template() shall be verified before being used. As 'template' is already known when avs_hw_constraints_init() is fired, drop the search entirely.
In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Verify content returned by parse_int_array() The first element of the returned array stores its length. If it is 0, any manipulation beyond the element at index 0 ends with null-ptr-deref.
CVE-2025-38305 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix NULL pointer deference on eir_get_service_data The len parameter is considered optional so it can be NULL so it cannot be used for skipping to next entry of EIR_SERVICE_DATA.
In the Linux kernel, the following vulnerability has been resolved: block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work Bios queued up in the zone write plug have already gone through all all preparation in the submit_bio path, including the freeze protection. Submitting them through submit_bio_noacct_nocheck duplicates the work and can can cause deadlocks when freezing a queue with pending bio write plugs. Go straight to ->submit_bio or blk_mq_submit_bio to bypass the superfluous extra freeze protection and checks.
In the Linux kernel, the following vulnerability has been resolved: nvmem: zynqmp_nvmem: unbreak driver after cleanup Commit 29be47fcd6a0 ("nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup") changed the driver to expect the device pointer to be passed as the "context", but in nvmem the context parameter comes from nvmem_config.priv which is never set - Leading to null pointer exceptions when the device is accessed.
In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare() Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare(): 1] If dma_map_sg() fails for areq->dst, the device driver would try to free DMA memory it has not allocated in the first place. To fix this, on the "theend_sgs" error path, call dma unmap only if the corresponding dma map was successful. 2] If the dma_map_single() call for the IV fails, the device driver would try to free an invalid DMA memory address on the "theend_iv" path: ------------[ cut here ]------------ DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90 Modules linked in: skcipher_example(O+) CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT Tainted: [O]=OOT_MODULE Hardware name: OrangePi Zero2 (DT) pc : check_unmap+0x123c/0x1b90 lr : check_unmap+0x123c/0x1b90 ... Call trace: check_unmap+0x123c/0x1b90 (P) debug_dma_unmap_page+0xac/0xc0 dma_unmap_page_attrs+0x1f4/0x5fc sun8i_ce_cipher_do_one+0x1bd4/0x1f40 crypto_pump_work+0x334/0x6e0 kthread_worker_fn+0x21c/0x438 kthread+0x374/0x664 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- To fix this, check for !dma_mapping_error() before calling dma_unmap_single() on the "theend_iv" path.
CVE-2025-38298 is a general protection fault vulnerability in the Linux kernel's EDAC/skx_common module caused by failure to reset the 'adxl_component_count' variable during module unload/reload cycles. This affects users running i10nm_edac or skx_edac_common on Intel Xeon systems, allowing local attackers with low privileges to trigger a kernel crash or potential code execution through error injection testing or normal module lifecycle operations. The vulnerability has a CVSS score of 7.8 (high severity) but appears to be a reliability/denial-of-service issue rather than actively exploited in the wild.
In the Linux kernel, the following vulnerability has been resolved: PM: EM: Fix potential division-by-zero error in em_compute_costs() When the device is of a non-CPU type, table[i].performance won't be initialized in the previous em_init_performance(), resulting in division by zero when calculating costs in em_compute_costs(). Since the 'cost' algorithm is only used for EAS energy efficiency calculations and is currently not utilized by other device drivers, we should add the _is_cpu_device(dev) check to prevent this division-by-zero issue.
CVE-2025-38296 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38295 is a kernel preemption context violation in the Amlogic DDR PMU driver where smp_processor_id() is called in a preemptible context, causing kernel warnings and potential system instability. This affects Linux kernel users with Amlogic SoC-based systems (e.g., ODROID-N2Plus) when the meson_ddr_pmu module is loaded. While the vulnerability allows a local unprivileged user to trigger kernel warnings and potentially cause denial of service, there is no evidence of active exploitation or public POC, and the fix involves a simple API replacement from smp_processor_id() to raw_smp_processor_id().
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL access in assign channel context handler Currently, when ath12k_mac_assign_vif_to_vdev() fails, the radio handle (ar) gets accessed from the link VIF handle (arvif) for debug logging, This is incorrect. In the fail scenario, radio handle is NULL. Fix the NULL access, avoid radio handle access by moving to the hardware debug logging helper function (ath12k_hw_warn). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
CVE-2025-38289 is a use-after-free vulnerability in the Linux kernel's lpfc (Emulex/Broadcom Fibre Channel) driver that occurs in the dev_loss_tmo_callbk function during driver unload or fatal error handling. A local privileged attacker can exploit this to achieve arbitrary code execution with high confidentiality, integrity, and availability impact. There is no evidence of active exploitation in the wild or public proof-of-concept code at this time, but the vulnerability represents a real kernel memory safety issue requiring prompt patching.
CVE-2025-38288 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
CVE-2025-38286 is an out-of-bounds array access vulnerability in the Linux kernel's AT91 GPIO pinctrl driver caused by insufficient validation of device tree alias values during probe. A local attacker with low privileges can trigger an out-of-bounds read or write to the gpio_chips array, potentially leading to information disclosure or denial of service. The vulnerability affects Linux kernel versions with the vulnerable at91_gpio_probe() function and is not currently listed in CISA KEV, indicating limited evidence of active exploitation.
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: configure manual DAC mode via PCI config API only To support 36-bit DMA, configure chip proprietary bit via PCI config API or chip DBI interface. However, the PCI device mmap isn't set yet and the DBI is also inaccessible via mmap, so only if the bit can be accessible via PCI config API, chip can support 36-bit DMA. Otherwise, fallback to 32-bit DMA. With NULL mmap address, kernel throws trace: BUG: unable to handle page fault for address: 0000000000001090 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 71 Comm: irq/26-pciehp Tainted: G OE 6.14.2-061402-generic #202504101348 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE RIP: 0010:rtw89_pci_ops_write16+0x12/0x30 [rtw89_pci] RSP: 0018:ffffb0ffc0acf9d8 EFLAGS: 00010206 RAX: ffffffffc158f9c0 RBX: ffff94865e702020 RCX: 0000000000000000 RDX: 0000000000000718 RSI: 0000000000001090 RDI: ffff94865e702020 RBP: ffffb0ffc0acf9d8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000015 R13: 0000000000000719 R14: ffffb0ffc0acfa1f R15: ffffffffc1813060 FS: 0000000000000000(0000) GS:ffff9486f3480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001090 CR3: 0000000090440001 CR4: 00000000000626f0 Call Trace: <TASK> rtw89_pci_read_config_byte+0x6d/0x120 [rtw89_pci] rtw89_pci_cfg_dac+0x5b/0xb0 [rtw89_pci] rtw89_pci_probe+0xa96/0xbd0 [rtw89_pci] ? __pfx___device_attach_driver+0x10/0x10 ? __pfx___device_attach_driver+0x10/0x10 local_pci_probe+0x47/0xa0 pci_call_probe+0x5d/0x190 pci_device_probe+0xa7/0x160 really_probe+0xf9/0x370 ? pm_runtime_barrier+0x55/0xa0 __driver_probe_device+0x8c/0x140 driver_probe_device+0x24/0xd0 __device_attach_driver+0xcd/0x170 bus_for_each_drv+0x99/0x100 __device_attach+0xb4/0x1d0 device_attach+0x10/0x20 pci_bus_add_device+0x59/0x90 pci_bus_add_devices+0x31/0x80 pciehp_configure_device+0xaa/0x170 pciehp_enable_slot+0xd6/0x240 pciehp_handle_presence_or_link_change+0xf1/0x180 pciehp_ist+0x162/0x1c0 irq_thread_fn+0x24/0x70 irq_thread+0xef/0x1c0 ? __pfx_irq_thread_fn+0x10/0x10 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xfc/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x47/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>
CVE-2025-38282 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Add NULL check in mt7996_thermal_init devm_kasprintf() can return a NULL pointer on failure,but this returned value in mt7996_thermal_init() is not checked. Add NULL check in mt7996_thermal_init(), to handle kernel NULL pointer dereference error.
CVE-2025-38279 is a kernel verifier bug in Linux BPF (Berkeley Packet Filter) subsystem where improper handling of stack pointer register (r10) in precision backtracking causes a WARNING and EFAULT return during eBPF program verification. This affects unprivileged users on Linux systems with BPF enabled; an attacker with local access and BPF capabilities can trigger a kernel warning and denial of service by loading a specially crafted eBPF program. No active exploitation in the wild is confirmed, but a proof-of-concept test case is provided in the patch commit.
In the Linux kernel, the following vulnerability has been resolved: mtd: nand: ecc-mxic: Fix use of uninitialized variable ret If ctx->steps is zero, the loop processing ECC steps is skipped, and the variable ret remains uninitialized. It is later checked and returned, which leads to undefined behavior and may cause unpredictable results in user space or kernel crashes. This scenario can be triggered in edge cases such as misconfigured geometry, ECC engine misuse, or if ctx->steps is not validated after initialization. Initialize ret to zero before the loop to ensure correct and safe behavior regardless of the ctx->steps value. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug The qmp_usb_iomap() helper function currently returns the raw result of devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return a NULL pointer and the caller only checks error pointers with IS_ERR(), NULL could bypass the check and lead to an invalid dereference. Fix the issue by checking if devm_ioremap() returns NULL. When it does, qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM), ensuring safe and consistent error handling.
In the Linux kernel, the following vulnerability has been resolved: fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt() fpga_mgr_test_img_load_sgt() allocates memory for sgt using kunit_kzalloc() however it does not check if the allocation failed. It then passes sgt to sg_alloc_table(), which passes it to __sg_alloc_table(). This function calls memset() on sgt in an attempt to zero it out. If the allocation fails then sgt will be NULL and the memset will trigger a NULL pointer dereference. Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL().
CVE-2025-38272 is a security vulnerability (CVSS 5.5) that allows eee. Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: net: prevent a NULL deref in rtnl_create_link() At the time rtnl_create_link() is running, dev->netdev_ops is NULL, we must not use netdev_lock_ops() or risk a NULL deref if CONFIG_NET_SHAPER is defined. Use netif_set_group() instead of dev_set_group(). RIP: 0010:netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] RIP: 0010:netdev_lock_ops include/net/netdev_lock.h:41 [inline] RIP: 0010:dev_set_group+0xc0/0x230 net/core/dev_api.c:82 Call Trace: <TASK> rtnl_create_link+0x748/0xd10 net/core/rtnetlink.c:3674 rtnl_newlink_create+0x25c/0xb00 net/core/rtnetlink.c:3813 __rtnl_newlink net/core/rtnetlink.c:3940 [inline] rtnl_newlink+0x16d6/0x1c70 net/core/rtnetlink.c:4055 rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6944 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2534 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x75b/0x8d0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline]
In the Linux kernel, the following vulnerability has been resolved: btrfs: exit after state insertion failure at btrfs_convert_extent_bit() If insert_state() state failed it returns an error pointer and we call extent_io_tree_panic() which will trigger a BUG() call. However if CONFIG_BUG is disabled, which is an uncommon and exotic scenario, then we fallthrough and call cache_state() which will dereference the error pointer, resulting in an invalid memory access. So jump to the 'out' label after calling extent_io_tree_panic(), it also makes the code more clear besides dealing with the exotic scenario where CONFIG_BUG is disabled.
In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: move tcpm_queue_vdm_unlocked to asynchronous work A state check was previously added to tcpm_queue_vdm_unlocked to prevent a deadlock where the DisplayPort Alt Mode driver would be executing work and attempting to grab the tcpm_lock while the TCPM was holding the lock and attempting to unregister the altmode, blocking on the altmode driver's cancel_work_sync call. Because the state check isn't protected, there is a small window where the Alt Mode driver could determine that the TCPM is in a ready state and attempt to grab the lock while the TCPM grabs the lock and changes the TCPM state to one that causes the deadlock. The callstack is provided below: [110121.667392][ C7] Call trace: [110121.667396][ C7] __switch_to+0x174/0x338 [110121.667406][ C7] __schedule+0x608/0x9f0 [110121.667414][ C7] schedule+0x7c/0xe8 [110121.667423][ C7] kernfs_drain+0xb0/0x114 [110121.667431][ C7] __kernfs_remove+0x16c/0x20c [110121.667436][ C7] kernfs_remove_by_name_ns+0x74/0xe8 [110121.667442][ C7] sysfs_remove_group+0x84/0xe8 [110121.667450][ C7] sysfs_remove_groups+0x34/0x58 [110121.667458][ C7] device_remove_groups+0x10/0x20 [110121.667464][ C7] device_release_driver_internal+0x164/0x2e4 [110121.667475][ C7] device_release_driver+0x18/0x28 [110121.667484][ C7] bus_remove_device+0xec/0x118 [110121.667491][ C7] device_del+0x1e8/0x4ac [110121.667498][ C7] device_unregister+0x18/0x38 [110121.667504][ C7] typec_unregister_altmode+0x30/0x44 [110121.667515][ C7] tcpm_reset_port+0xac/0x370 [110121.667523][ C7] tcpm_snk_detach+0x84/0xb8 [110121.667529][ C7] run_state_machine+0x4c0/0x1b68 [110121.667536][ C7] tcpm_state_machine_work+0x94/0xe4 [110121.667544][ C7] kthread_worker_fn+0x10c/0x244 [110121.667552][ C7] kthread+0x104/0x1d4 [110121.667557][ C7] ret_from_fork+0x10/0x20 [110121.667689][ C7] Workqueue: events dp_altmode_work [110121.667697][ C7] Call trace: [110121.667701][ C7] __switch_to+0x174/0x338 [110121.667710][ C7] __schedule+0x608/0x9f0 [110121.667717][ C7] schedule+0x7c/0xe8 [110121.667725][ C7] schedule_preempt_disabled+0x24/0x40 [110121.667733][ C7] __mutex_lock+0x408/0xdac [110121.667741][ C7] __mutex_lock_slowpath+0x14/0x24 [110121.667748][ C7] mutex_lock+0x40/0xec [110121.667757][ C7] tcpm_altmode_enter+0x78/0xb4 [110121.667764][ C7] typec_altmode_enter+0xdc/0x10c [110121.667769][ C7] dp_altmode_work+0x68/0x164 [110121.667775][ C7] process_one_work+0x1e4/0x43c [110121.667783][ C7] worker_thread+0x25c/0x430 [110121.667789][ C7] kthread+0x104/0x1d4 [110121.667794][ C7] ret_from_fork+0x10/0x20 Change tcpm_queue_vdm_unlocked to queue for tcpm_queue_vdm_work, which can perform the state check while holding the TCPM lock while the Alt Mode lock is no longer held. This requires a new struct to hold the vdm data, altmode_vdm_event.
CVE-2025-38267 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: serial: jsm: fix NPE during jsm_uart_port_init No device was set which caused serial_base_ctrl_add to crash. BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1 Debian 6.12.25-1 RIP: 0010:serial_base_ctrl_add+0x96/0x120 Call Trace: <TASK> serial_core_register_port+0x1a0/0x580 ? __setup_irq+0x39c/0x660 ? __kmalloc_cache_noprof+0x111/0x310 jsm_uart_port_init+0xe8/0x180 [jsm] jsm_probe_one+0x1f4/0x410 [jsm] local_pci_probe+0x42/0x90 pci_device_probe+0x22f/0x270 really_probe+0xdb/0x340 ? pm_runtime_barrier+0x54/0x90 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8c/0xe0 bus_add_driver+0x112/0x1f0 driver_register+0x72/0xd0 jsm_init_module+0x36/0xff0 [jsm] ? __pfx_jsm_init_module+0x10/0x10 [jsm] do_one_initcall+0x58/0x310 do_init_module+0x60/0x230 Tested with Digi Neo PCIe 8 port card.
In the Linux kernel, the following vulnerability has been resolved: bcache: fix NULL pointer in cache_set_flush() 1. LINE#1794 - LINE#1887 is some codes about function of bch_cache_set_alloc(). 2. LINE#2078 - LINE#2142 is some codes about function of register_cache_set(). 3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098. 1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb) 1795 { ... 1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) || 1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) || 1862 mempool_init_kmalloc_pool(&c->bio_meta, 2, 1863 sizeof(struct bbio) + sizeof(struct bio_vec) * 1864 bucket_pages(c)) || 1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) || 1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio), 1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) || 1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) || 1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc", 1870 WQ_MEM_RECLAIM, 0)) || 1871 bch_journal_alloc(c) || 1872 bch_btree_cache_alloc(c) || 1873 bch_open_buckets_alloc(c) || 1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages))) 1875 goto err; ^^^^^^^^ 1876 ... 1883 return c; 1884 err: 1885 bch_cache_set_unregister(c); ^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1886 return NULL; 1887 } ... 2078 static const char *register_cache_set(struct cache *ca) 2079 { ... 2098 c = bch_cache_set_alloc(&ca->sb); 2099 if (!c) 2100 return err; ^^^^^^^^^^ ... 2128 ca->set = c; 2129 ca->set->cache[ca->sb.nr_this_dev] = ca; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ... 2138 return NULL; 2139 err: 2140 bch_cache_set_unregister(c); 2141 return err; 2142 } (1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and call bch_cache_set_unregister()(LINE#1885). (2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return. (3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the value to c->cache[], it means that c->cache[] is NULL. LINE#1624 - LINE#1665 is some codes about function of cache_set_flush(). As (1), in LINE#1885 call bch_cache_set_unregister() ---> bch_cache_set_stop() ---> closure_queue() -.-> cache_set_flush() (as below LINE#1624) 1624 static void cache_set_flush(struct closure *cl) 1625 { ... 1654 for_each_cache(ca, c, i) 1655 if (ca->alloc_thread) ^^ 1656 kthread_stop(ca->alloc_thread); ... 1665 } (4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the kernel crash occurred as below: [ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory [ 846.713242] bcache: register_bcache() error : failed to register device [ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered [ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8 [ 846.714790] PGD 0 P4D 0 [ 846.715129] Oops: 0000 [#1] SMP PTI [ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1 [ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018 [ 846.716451] Workqueue: events cache_set_flush [bcache] [ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache] [ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 0 ---truncated---
In the Linux kernel, the following vulnerability has been resolved: btrfs: handle csum tree error with rescue=ibadroots correctly [BUG] There is syzbot based reproducer that can crash the kernel, with the following call trace: (With some debug output added) DEBUG: rescue=ibadroots parsed BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010) BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8 BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm BTRFS info (device loop0): using free-space-tree BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0 DEBUG: read tree root path failed for tree csum, ret=-5 BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0 BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0 process 'repro' launched './file2' with NULL argv: empty string added DEBUG: no csum root, idatacsums=0 ibadroots=134217728 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs] Call Trace: <TASK> btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs] btrfs_submit_bbio+0x43e/0x1a80 [btrfs] submit_one_bio+0xde/0x160 [btrfs] btrfs_readahead+0x498/0x6a0 [btrfs] read_pages+0x1c3/0xb20 page_cache_ra_order+0x4b5/0xc20 filemap_get_pages+0x2d3/0x19e0 filemap_read+0x314/0xde0 __kernel_read+0x35b/0x900 bprm_execve+0x62e/0x1140 do_execveat_common.isra.0+0x3fc/0x520 __x64_sys_execveat+0xdc/0x130 do_syscall_64+0x54/0x1d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ---[ end trace 0000000000000000 ]--- [CAUSE] Firstly the fs has a corrupted csum tree root, thus to mount the fs we have to go "ro,rescue=ibadroots" mount option. Normally with that mount option, a bad csum tree root should set BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will ignore csum search. But in this particular case, we have the following call trace that caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS: load_global_roots_objectid(): ret = btrfs_search_slot(); /* Succeeded */ btrfs_item_key_to_cpu() found = true; /* We found the root item for csum tree. */ root = read_tree_root_path(); if (IS_ERR(root)) { if (!btrfs_test_opt(fs_info, IGNOREBADROOTS)) /* * Since we have rescue=ibadroots mount option, * @ret is still 0. */ break; if (!found || ret) { /* @found is true, @ret is 0, error handling for csum * tree is skipped. */ } This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if the csum tree is corrupted, which results unexpected later csum lookup. [FIX] If read_tree_root_path() failed, always populate @ret to the error number. As at the end of the function, we need @ret to determine if we need to do the extra error handling for csum tree.
In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9335: Fix missing free of regulator supplies Driver gets and enables all regulator supplies in probe path (wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup in final error paths and in unbind (missing remove() callback). This leads to leaked memory and unbalanced regulator enable count during probe errors or unbind. Fix this by converting entire code into devm_regulator_bulk_get_enable() which also greatly simplifies the code.
In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write memcg_path_store() assigns a newly allocated memory buffer to filter->memcg_path, without deallocating the previously allocated and assigned memory buffer. As a result, users can leak kernel memory by continuously writing a data to memcg_path DAMOS sysfs file. Fix the leak by deallocating the previously set memory buffer.
CVE-2025-38256 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: lib/group_cpus: fix NULL pointer dereference from group_cpus_evenly() While testing null_blk with configfs, echo 0 > poll_queues will trigger following panic: BUG: kernel NULL pointer dereference, address: 0000000000000010 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 27 UID: 0 PID: 920 Comm: bash Not tainted 6.15.0-02023-gadbdb95c8696-dirty #1238 PREEMPT(undef) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__bitmap_or+0x48/0x70 Call Trace: <TASK> __group_cpus_evenly+0x822/0x8c0 group_cpus_evenly+0x2d9/0x490 blk_mq_map_queues+0x1e/0x110 null_map_queues+0xc9/0x170 [null_blk] blk_mq_update_queue_map+0xdb/0x160 blk_mq_update_nr_hw_queues+0x22b/0x560 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_poll_queues_store+0xa4/0x130 [null_blk] configfs_write_iter+0x109/0x1d0 vfs_write+0x26e/0x6f0 ksys_write+0x79/0x180 __x64_sys_write+0x1d/0x30 x64_sys_call+0x45c4/0x45f0 do_syscall_64+0xa5/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e Root cause is that numgrps is set to 0, and ZERO_SIZE_PTR is returned from kcalloc(), and later ZERO_SIZE_PTR will be deferenced. Fix the problem by checking numgrps first in group_cpus_evenly(), and return NULL directly if numgrps is zero. [yukuai3@huawei.com: also fix the non-SMP version]
CVE-2025-38254 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: atm: clip: prevent NULL deref in clip_push() Blamed commit missed that vcc_destroy_socket() calls clip_push() with a NULL skb. If clip_devs is NULL, clip_push() then crashes when reading skb->truesize.
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3() In snd_usb_get_audioformat_uac3(), the length value returned from snd_usb_ctl_msg() is used directly for memory allocation without validation. This length is controlled by the USB device. The allocated buffer is cast to a uac3_cluster_header_descriptor and its fields are accessed without verifying that the buffer is large enough. If the device returns a smaller than expected length, this leads to an out-of-bounds read. Add a length check to ensure the buffer is large enough for uac3_cluster_header_descriptor.
CVE-2025-38247 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
CVE-2025-38245 is a security vulnerability (CVSS 7.8). High severity vulnerability requiring prompt remediation. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid inode pointer dereferences during log replay In a few places where we call read_one_inode(), if we get a NULL pointer we end up jumping into an error path, or fallthrough in case of __add_inode_ref(), where we then do something like this: iput(&inode->vfs_inode); which results in an invalid inode pointer that triggers an invalid memory access, resulting in a crash. Fix this by making sure we don't do such dereferences.
In the Linux kernel, the following vulnerability has been resolved: mm/shmem, swap: fix softlockup with mTHP swapin Following softlockup can be easily reproduced on my test machine with: echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device mkdir -p /sys/fs/cgroup/memory/test echo 1G > /sys/fs/cgroup/test/memory.max echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs while true; do dd if=/dev/zero of=/tmp/test.img bs=1M count=5120 cat /tmp/test.img > /dev/null rm /tmp/test.img done Then after a while: watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787] Modules linked in: zram virtiofs CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G L 6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)· Tainted: [L]=SOFTLOCKUP Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015 RIP: 0010:mpol_shared_policy_lookup+0xd/0x70 Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8 RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202 RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001 RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518 RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001 R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000 FS: 00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> shmem_alloc_folio+0x31/0xc0 shmem_swapin_folio+0x309/0xcf0 ? filemap_get_entry+0x117/0x1e0 ? xas_load+0xd/0xb0 ? filemap_get_entry+0x101/0x1e0 shmem_get_folio_gfp+0x2ed/0x5b0 shmem_file_read_iter+0x7f/0x2e0 vfs_read+0x252/0x330 ksys_read+0x68/0xf0 do_syscall_64+0x4c/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f03f9a46991 Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991 RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003 RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000 </TASK> The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in conflict with it, so swapcache_prepare fails and causes shmem_swap_alloc_folio to return -EEXIST, and shmem simply retries again and again causing this loop. Fix it by applying a similar fix for anon mTHP swapin. The performance change is very slight, time of swapin 10g zero folios with shmem (test for 12 times): Before: 2.47s After: 2.48s [kasong@tencent.com: add comment]
CVE-2025-38235 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In version 4.5.0, using a specially crafted tee-supplicant binary running in REE userspace, an attacker can trigger a panic in a TA that uses the libutee Secure Storage API. Many functions in libutee, specifically those which make up the Secure Storage API, will panic if a system call returns an unexpected return code. This behavior is mandated by the TEE Internal Core API specification. However, in OP-TEE’s implementation, return codes of secure storage operations are passed through unsanitized from the REE tee-supplicant, through the Linux kernel tee-driver, through the OP-TEE kernel, back to libutee. Thus, an attacker with access to REE userspace, and the ability to stop tee-supplicant and replace it with their own process (generally trivial for a root user, and depending on the way permissions are set up, potentially available even to less privileged users) can run a malicious tee-supplicant process that responds to storage requests with unexpected response codes, triggering a panic in the requesting TA. This is particularly dangerous for TAs built with `TA_FLAG_SINGLE_INSTANCE` (corresponding to `gpd.ta.singleInstance` and `TA_FLAG_INSTANCE_KEEP_ALIVE` (corresponding to `gpd.ta.keepAlive`). The behavior of these TAs may depend on memory that is preserved between sessions, and the ability of an attacker to panic the TA and reload it with a clean memory space can compromise the behavior of those TAs. A critical example of this is the optee_ftpm TA. It uses the kept alive memory to hold PCR values, which crucially must be non-resettable. An attacker who can trigger a panic in the fTPM TA can reset the PCRs, and then extend them PCRs with whatever they choose, falsifying boot measurements, accessing sealed data, and potentially more. The impact of this issue depends significantly on the behavior of affected TAs. For some, it could manifest as a denial of service, while for others, like the fTPM TA, it can result in the disclosure of sensitive data. Anyone running the fTPM TA is affected, but similar attacks may be possible on other TAs that leverage the Secure Storage API. A fix is available in commit 941a58d78c99c4754fbd4ec3079ec9e1d596af8f.
In the Linux kernel, the following vulnerability has been resolved: media: cxusb: no longer judge rbuf when the write fails syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the Linux kernel, the following vulnerability has been resolved: media: imagination: fix a potential memory leak in e5010_probe() Add video_device_release() to release the memory allocated by video_device_alloc() if something goes wrong.
In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Cleanup after an allocation error When allocation failures are not cleaned up by the driver, further allocation errors will be false-positives, which will cause buffers to remain uninitialized and cause NULL pointer dereferences. Ensure proper cleanup of failed allocations to prevent these issues.
In the Linux kernel, the following vulnerability has been resolved: ceph: avoid kernel BUG for encrypted inode with unaligned file size The generic/397 test hits a BUG_ON for the case of encrypted inode with unaligned file size (for example, 33K or 1K): [ 877.737811] run fstests generic/397 at 2025-01-03 12:34:40 [ 877.875761] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.876130] libceph: client4614 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 877.991965] libceph: mon0 (2)127.0.0.1:40674 session established [ 877.992334] libceph: client4617 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.017234] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.017594] libceph: client4620 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.031394] xfs_io (pid 18988) is setting deprecated v1 encryption policy; recommend upgrading to v2. [ 878.054528] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.054892] libceph: client4623 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.070287] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.070704] libceph: client4626 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.264586] libceph: mon0 (2)127.0.0.1:40674 session established [ 878.265258] libceph: client4629 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949 [ 878.374578] -----------[ cut here ]------------ [ 878.374586] kernel BUG at net/ceph/messenger.c:1070! [ 878.375150] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 878.378145] CPU: 2 UID: 0 PID: 4759 Comm: kworker/2:9 Not tainted 6.13.0-rc5+ #1 [ 878.378969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 878.380167] Workqueue: ceph-msgr ceph_con_workfn [ 878.381639] RIP: 0010:ceph_msg_data_cursor_init+0x42/0x50 [ 878.382152] Code: 89 17 48 8b 46 70 55 48 89 47 08 c7 47 18 00 00 00 00 48 89 e5 e8 de cc ff ff 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 0f 0b <0f> 0b 0f 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 [ 878.383928] RSP: 0018:ffffb4ffc7cbbd28 EFLAGS: 00010287 [ 878.384447] RAX: ffffffff82bb9ac0 RBX: ffff981390c2f1f8 RCX: 0000000000000000 [ 878.385129] RDX: 0000000000009000 RSI: ffff981288232b58 RDI: ffff981390c2f378 [ 878.385839] RBP: ffffb4ffc7cbbe18 R08: 0000000000000000 R09: 0000000000000000 [ 878.386539] R10: 0000000000000000 R11: 0000000000000000 R12: ffff981390c2f030 [ 878.387203] R13: ffff981288232b58 R14: 0000000000000029 R15: 0000000000000001 [ 878.387877] FS: 0000000000000000(0000) GS:ffff9814b7900000(0000) knlGS:0000000000000000 [ 878.388663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 878.389212] CR2: 00005e106a0554e0 CR3: 0000000112bf0001 CR4: 0000000000772ef0 [ 878.389921] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 878.390620] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 878.391307] PKRU: 55555554 [ 878.391567] Call Trace: [ 878.391807] <TASK> [ 878.392021] ? show_regs+0x71/0x90 [ 878.392391] ? die+0x38/0xa0 [ 878.392667] ? do_trap+0xdb/0x100 [ 878.392981] ? do_error_trap+0x75/0xb0 [ 878.393372] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.393842] ? exc_invalid_op+0x53/0x80 [ 878.394232] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.394694] ? asm_exc_invalid_op+0x1b/0x20 [ 878.395099] ? ceph_msg_data_cursor_init+0x42/0x50 [ 878.395583] ? ceph_con_v2_try_read+0xd16/0x2220 [ 878.396027] ? _raw_spin_unlock+0xe/0x40 [ 878.396428] ? raw_spin_rq_unlock+0x10/0x40 [ 878.396842] ? finish_task_switch.isra.0+0x97/0x310 [ 878.397338] ? __schedule+0x44b/0x16b0 [ 878.397738] ceph_con_workfn+0x326/0x750 [ 878.398121] process_one_work+0x188/0x3d0 [ 878.398522] ? __pfx_worker_thread+0x10/0x10 [ 878.398929] worker_thread+0x2b5/0x3c0 [ 878.399310] ? __pfx_worker_thread+0x10/0x10 [ 878.399727] kthread+0xe1/0x120 [ 878.400031] ? __pfx_kthread+0x10/0x10 [ 878.400431] ret_from_fork+0x43/0x70 [ 878.400771] ? __pfx_kthread+0x10/0x10 [ 878.401127] ret_from_fork_asm+0x1a/0x30 [ 878.401543] </TASK> [ 878.401760] Modules l ---truncated---
In the Linux kernel, the following vulnerability has been resolved: ext4: fix out of bounds punch offset Punching a hole with a start offset that exceeds max_end is not permitted and will result in a negative length in the truncate_inode_partial_folio() function while truncating the page cache, potentially leading to undesirable consequences. A simple reproducer: truncate -s 9895604649994 /mnt/foo xfs_io -c "pwrite 8796093022208 4096" /mnt/foo xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo kernel BUG at include/linux/highmem.h:275! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110 RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287 RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000 RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000 RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000 R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005 R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000 FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> truncate_inode_partial_folio+0x3dd/0x620 truncate_inode_pages_range+0x226/0x720 ? bdev_getblk+0x52/0x3e0 ? ext4_get_group_desc+0x78/0x150 ? crc32c_arch+0xfd/0x180 ? __ext4_get_inode_loc+0x18c/0x840 ? ext4_inode_csum+0x117/0x160 ? jbd2_journal_dirty_metadata+0x61/0x390 ? __ext4_handle_dirty_metadata+0xa0/0x2b0 ? kmem_cache_free+0x90/0x5a0 ? jbd2_journal_stop+0x1d5/0x550 ? __ext4_journal_stop+0x49/0x100 truncate_pagecache_range+0x50/0x80 ext4_truncate_page_cache_block_range+0x57/0x3a0 ext4_punch_hole+0x1fe/0x670 ext4_fallocate+0x792/0x17d0 ? __count_memcg_events+0x175/0x2a0 vfs_fallocate+0x121/0x560 ksys_fallocate+0x51/0xc0 __x64_sys_fallocate+0x24/0x40 x64_sys_call+0x18d2/0x4170 do_syscall_64+0xa7/0x220 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by filtering out cases where the punching start offset exceeds max_end.
In the Linux kernel, the following vulnerability has been resolved: ext4: only dirty folios when data journaling regular files fstest generic/388 occasionally reproduces a crash that looks as follows: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ext4_block_zero_page_range+0x30c/0x380 [ext4] ext4_truncate+0x436/0x440 [ext4] ext4_process_orphan+0x5d/0x110 [ext4] ext4_orphan_cleanup+0x124/0x4f0 [ext4] ext4_fill_super+0x262d/0x3110 [ext4] get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x26/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4ed/0x6b0 do_syscall_64+0x82/0x170 ... This occurs when processing a symlink inode from the orphan list. The partial block zeroing code in the truncate path calls ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an a_ops vector in ext4, hence the crash. To avoid this problem, update the ext4_dirty_journalled_data() helper to only mark the folio dirty on regular files (for which a_ops is assigned). This also matches the journaling logic in the ext4_symlink() creation path, where ext4_handle_dirty_metadata() is called directly.
CVE-2025-38219 is a security vulnerability (CVSS 5.5). Remediation should follow standard vulnerability management procedures. Vendor patch is available.
In the Linux kernel, the following vulnerability has been resolved: hwmon: (ftsteutates) Fix TOCTOU race in fts_read() In the fts_read() function, when handling hwmon_pwm_auto_channels_temp, the code accesses the shared variable data->fan_source[channel] twice without holding any locks. It is first checked against FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again when used as an argument to the BIT() macro. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition. Another thread executing fts_update_device() can modify the value of data->fan_source[channel] between the check and its use. If the value is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the BIT() macro will be called with a large shift value (BIT(255)). A bit shift by a value greater than or equal to the type width is undefined behavior and can lead to a crash or incorrect values being returned to userspace. Fix this by reading data->fan_source[channel] into a local variable once, eliminating the race condition. Additionally, add a bounds check to ensure the value is less than BITS_PER_LONG before passing it to the BIT() macro, making the code more robust against undefined behavior. This possible bug was found by an experimental static analysis tool developed by our team.
In the Linux kernel, the following vulnerability has been resolved: configfs-tsm-report: Fix NULL dereference of tsm_ops Unlike sysfs, the lifetime of configfs objects is controlled by userspace. There is no mechanism for the kernel to find and delete all created config-items. Instead, the configfs-tsm-report mechanism has an expectation that tsm_unregister() can happen at any time and cause established config-item access to start failing. That expectation is not fully satisfied. While tsm_report_read(), tsm_report_{is,is_bin}_visible(), and tsm_report_make_item() safely fail if tsm_ops have been unregistered, tsm_report_privlevel_store() tsm_report_provider_show() fail to check for ops registration. Add the missing checks for tsm_ops having been removed. Now, in supporting the ability for tsm_unregister() to always succeed, it leaves the problem of what to do with lingering config-items. The expectation is that the admin that arranges for the ->remove() (unbind) of the ${tsm_arch}-guest driver is also responsible for deletion of all open config-items. Until that deletion happens, ->probe() (reload / bind) of the ${tsm_arch}-guest driver fails. This allows for emergency shutdown / revocation of attestation interfaces, and requires coordinated restart.
In the Linux kernel, the following vulnerability has been resolved: smb: client: add NULL check in automount_fullpath page is checked for null in __build_path_from_dentry_optional_prefix when tcon->origin_fullpath is not set. However, the check is missing when it is set. Add a check to prevent a potential NULL pointer dereference.