Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach exposed PeopleTools HTTP endpoint
-
DeliverySend crafted request to Business Interlink
-
ExploitSatisfy complex exploitation preconditions
-
ExecutionCompromise PeopleTools application
-
ImpactFull takeover of confidentiality, integrity, availability
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A01:2025 - Broken Access Control
ASVS 5.0
V8 - Authorization Access control enforcement
MITRE ATT&CK
1 technique across 1 tactic: Defense Evasion The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation targets the Business Interlink component of PeopleSoft Enterprise PeopleTools versions 8.61 through 8.63, reachable by an unauthenticated attacker over HTTP with network access (PR:N, UI:N). The primary limiting factor is high attack complexity (AC:H) - Oracle explicitly classifies this as 'difficult to exploit,' implying the attacker must meet conditions outside their direct control (e.g., specific configuration, timing, or environmental state of the Business Interlink integration feature) rather than firing a single deterministic request. Real-world exposure is further bounded by whether the PeopleTools web tier and the Business Interlink component are network-accessible to the attacker; internet-facing PeopleSoft portals are the highest-risk deployments. |
| Impact | This is a genuinely serious but not top-tier-urgent flaw. The Oracle-supplied CVSS 3.1 vector (AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H, base 8.1) is well-calibrated: it is network-reachable and unauthenticated (PR:N) with full confidentiality/integrity/availability impact ('takeover'), but Oracle explicitly rates it 'Difficult to exploit' (AC:H), which is why the score lands at 8.1 rather than 9.8 like the AC:L pre-auth sibling CVE-2026-73947 in the same CPU. No EPSS score, no CISA KEV listing, and no public exploit code are present in the supplied intelligence, so there is no signal of active exploitation or imminent commodity weaponization - the risk is currently theoretical/proximate rather than demonstrated. Signals are consistent (no conflict between CVSS network vector and the description, which confirms network HTTP access). The main data gap is the total absence of technical detail: Oracle's Critical Patch Update advisory (cspusep2026) discloses no attack mechanism, affected endpoint, or the specific weakness (CWE is N/A). Priority should be driven by patch discipline for internet-exposed PeopleSoft - apply the September 2026 CPU - but this is not a drop-everything zero-day given AC:H and no exploitation evidence. |
| Exploit ScenarioDerived | An unauthenticated attacker with network reachability to a PeopleSoft Enterprise PeopleTools instance sends crafted HTTP requests targeting the Business Interlink component and, after satisfying the difficult-to-meet conditions (AC:H), gains full compromise of the PeopleTools environment. No public exploit code has been identified at time of analysis, and the high attack complexity suggests exploitation would require specialized effort or specific runtime conditions rather than trivial scripting. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Sep 16, 2026
Unauthenticated attackers with HTTP network access to Oracle PeopleSoft Enterprise PeopleTools 8.61 through 8.63 can achieve full takeover of the application via the Business Interlink component, as reflected in a CVSS 3.1 base score of 8.1 with high confidentiality, integrity, and availability impact. The flaw is rated high attack complexity (AC:H) and Oracle describes it as 'difficult to exploit,' meaning a successful attack depends on conditions outside the attacker's direct control - such as a specific Business Interlink configuration, integration state, or timing - which keeps this a serious but not top-tier-urgent issue. No public exploit code has been identified at time of analysis and the CVE is not listed in CISA KEV; internet-facing PeopleSoft portals exposing the Business Interlink feature are the highest-risk deployments.
RemediationAI
No vendor-released patch identifier was provided in the available data for this CVE - no fixed version, no PR/commit reference, and no 'patch available' indicator - so treat Oracle's advisory at https://www.oracle.com/security-alerts/cspusep2026.html as the authoritative source and apply the PeopleTools fix release listed there for the 8.61-8.63 range as soon as it is published; because no patched version is confirmed here, do not assume any specific build number resolves the issue. Until the fix is applied, the most effective compensating control is to remove reachability to the Business Interlink entry points from untrusted networks - block or restrict the relevant HTTP/SOAP handler paths at the reverse proxy, WAF, or firewall and require VPN or allow-listed source networks for the PeopleTools web tier, with the trade-off that legitimate external integrations using Business Interlink will break until rules are tuned per consumer. If Business Interlink is not actively used, disable or undeploy the component and its servlet mappings (trade-off: irreversible for any hidden dependency, so inventory integrations first). Additionally, the high attack complexity means exploit attempts may leave anomalous or malformed requests in front-end and application logs, so enable verbose logging and alerting on unusual Business Interlink invocations as a detection measure, and verify that no unexpected configuration changes have been made to the integration framework.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
Business Interlink is the legacy PeopleTools integration framework that allows PeopleSoft components to invoke external business logic and third-party adapters, typically over HTTP/SOAP endpoints exposed by the PeopleSoft web tier. The affected code is reachable pre-authentication over the network (AV:N, PR:N, UI:N), and no CWE class is disclosed in the available data, so the precise root-cause class is not confirmed; the breadth of impact (C:H/I:H/A:H plus full application takeover) is consistent with unsafe handling of externally supplied input or objects in the Business Interlink request path rather than a simple information leak, even though the source tags label the issue 'Information Disclosure.' The AC:H rating is the key technical qualifier: unlike a deterministic single-request exploit, this issue requires a particular environmental or configuration precondition in the Business Interlink integration to be present, and EUVD corroborates the same affected range (PeopleTools 8.61 through 8.63) reported by Oracle's own security alert channel.
Know when the next one hits your stack
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H
Unauthenticated network HTTP (AV:N/PR:N) with vendor-stated difficult exploitation (AC:H) resulting in full takeover, so C:H/I:H/A:H; no scope change indicated.
Primary rating from Vendor (oracle).
CVSS VectorVendor: oracle
DescriptionCVE.org
Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Business Interlink). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in takeover of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H).
Executive ViewAI
Oracle PeopleSoft Enterprise PeopleTools versions 8.61 through 8.63 contain a high-severity vulnerability in the Business Interlink component that could allow attackers with network access to achieve full application takeover, impacting confidentiality, integrity, and availability. Exploitation is difficult and no public exploit identified at time of analysis, but internet-facing PeopleSoft portals that expose Business Interlink are at highest risk. Leadership should prioritize immediate exposure reduction and patch planning for affected deployments.
No vendor-released patch identified at time of analysis. Interim mitigations include restricting network access to the Business Interlink component to trusted sources, disabling the feature if not required, deploying WAF rules, and monitoring for unauthorized access or configuration changes.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.
EUVD-2026-79308
GHSA-3m8j-rf4q-9vxm
NVD
CVE.org
EPSS
Exploit-DB