Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach SmartIT management service over network
-
ExploitAuthenticate with hard-coded fixed password
-
ExecutionGain unauthenticated remote access to host
-
ImpactRead/modify data or disrupt endpoint
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A07:2025 - Authentication Failures
ASVS 5.0
V6 - Authentication Credential externalization
MITRE ATT&CK
2 techniques across 2 tactics: Persistence, Credential Access The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires network reachability to the SmartIT Desktop Manager management/agent service and knowledge of the product's embedded fixed password; no legitimate account, user interaction, or non-default configuration is needed (AV:N/AC:L/PR:N/UI:N). The main limiting factors are exposure and secrecy: the attacker must be able to reach the service (so instances confined to isolated management networks are far less exposed) and must obtain the hard-coded credential, which for a fixed shared secret is a matter of reverse-engineering or advisory disclosure rather than a real barrier. |
| Impact | The CVSS 4.0 vector (AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H, score 9.3) describes a network-reachable, low-complexity, unauthenticated attack with high impact to confidentiality, integrity, and availability of the vulnerable system - a profile that aligns well with hard-coded credentials and is largely self-consistent with the description. No EPSS score, KEV listing, or POC is provided, so the exploitation-probability and in-the-wild signals are absent rather than negative; the low real-world exposure of a niche Taiwanese vendor product likely means any exploitation would be targeted rather than mass-scanned. Once the fixed password is recovered (e.g., from a binary or a leaked advisory detail), exploitation is essentially point-and-shoot, so any organization running this product - even a mid-sized municipal IT team in walbrzych should treat this as urgent and rotate off it - should prioritize remediation despite the missing EPSS/KEV data. The primary uncertainty is patch and affected-version detail, which the wildcard CPE and generic TWCERT references do not pin down. |
| Exploit ScenarioDerived | An attacker who has recovered the fixed password (from the product binary, documentation, or a shared advisory detail) connects over the network to an exposed SmartIT Desktop Manager instance and authenticates without any legitimate account. With low attack complexity and no user interaction, they gain remote access to the managed user hosts and can read data, alter configuration, or disrupt the endpoints. No public POC is identified at time of analysis, but the static-credential design makes reliable exploitation trivial once the secret is known. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Sep 04, 2026
Hard-coded credentials in Lightstar's SmartIT Desktop Manager allow unauthenticated remote attackers to authenticate with a fixed, built-in password and gain remote access to managed user hosts. Reported through TWCERT, the flaw affects all currently listed versions of the product with no version qualifier in the CPE. There is no public exploit identified at time of analysis and it is not in CISA KEV, but the trivial exploitation path (a static shared secret) makes weaponization straightforward once the credential is disclosed.
RemediationAI
Consult the TWCERT advisories (https://www.twcert.org.tw/en/cp-139-11177-13ca3-2.html and https://www.twcert.org.tw/tw/cp-132-11176-a4cc2-1.html) and apply the vendor's fixed release once identified; no exact patched version number is provided in the available data, so treat patch status as 'patch guidance per coordinator advisory, exact fixed version not independently confirmed' and verify with Lightstar directly. Because the credential is hard-coded and cannot be changed by configuration, the most effective compensating control is to restrict network reachability of the management service - place the SmartIT management/agent ports behind a firewall or management VLAN so only trusted administrative hosts can reach them (trade-off: legitimate remote management from outside that segment breaks and must be routed via VPN/jump host). Where feasible, disable or isolate the product until a fixed build is deployed, and monitor the management channel for authentications from unexpected sources.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
SmartIT Desktop Manager is an endpoint/desktop management product from the Taiwanese vendor Lightstar (CPE cpe:2.3:a:lightstar:smartit_desktop_manager). The root cause is CWE-798 (Use of Hard-coded Credentials): a fixed password is embedded in the product and shared across deployments, so it is not unique per install and cannot be changed by the operator through normal configuration. Because desktop-management tooling is designed to remotely control agent hosts, an embedded credential that authenticates to that control channel effectively hands an attacker the same host-management capability the product itself provides.
Know when Smartit Desktop Manager gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N
Fixed shared password gives unauthenticated network attackers full host access with no complexity or interaction, so PR:N/UI:N/AC:L and high C/I/A; no scope change.
Primary rating from Vendor (twcert).
CVSS VectorVendor: twcert
DescriptionCVE.org
SmartIT Desktop Manager developed by Lightstar has a Use of Hard-coded Credentials vulnerability. Unauthenticated remote attackers can exploit a fixed password to remotely access user hosts.
Executive ViewAI
Lightstar SmartIT Desktop Manager contains hardcoded credentials that enable unauthenticated remote attackers to gain access to all managed user systems across the organization without requiring legitimate user authentication. With no vendor patch available, all currently deployed versions remain vulnerable, creating persistent risk of unauthorized system access, data exfiltration, and malware deployment through the compromised endpoint management layer. This represents a critical trust failure requiring immediate architectural response to isolate or replace the affected product.
Implement firewall rules restricting network access to Lightstar SmartIT Desktop Manager services; enable detailed logging and establish real-time alerting on authentication attempts using hardcoded credentials; conduct network segmentation to isolate SmartIT Desktop Manager infrastructure from critical systems and sensitive data; consider temporary suspension of non-essential SmartIT Desktop Manager functions pending deployment of a permanent remediation plan.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.
EUVD-2026-70870
GHSA-763h-54f2-rfvw
NVD
CVE.org
EPSS
Vulnrichment
VulDB
Exploit-DB