Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessReach WordPress site over network
-
ExploitForge trusted user-identity and role headers
-
ExecutionPlugin authenticates request as administrator
-
ImpactCreate admin account / full site takeover
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A06:2025 - Insecure Design
ASVS 5.0
V8 - Authorization Least privilege enforcement
MITRE ATT&CK
1 technique across 1 tactic: Privilege Escalation The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | The target must be running the Datawiza Proxy Auth Plugin for WordPress at a version in 1.1.0 up to (but not including) 1.1.1, with the plugin's header-based proxy authentication active. Exploitation requires the attacker to send the user-identity and role HTTP headers the plugin trusts and have them reach the plugin - i.e. the deployment must allow externally supplied copies of those headers to arrive at WordPress. The key LIMITING factor is topology: if a correctly configured reverse proxy strips or overwrites these identity/role headers before forwarding, attacker-supplied forged headers would not reach the plugin and would not be honored; the vulnerability is precisely that the plugin itself does not verify the headers came from that trusted proxy. The specific header names and exact request format are not described in the available sources. |
| Impact | Raw severity is maximal: the input CVSS 3.1 vector (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H, 9.8) describes a network-reachable, low-complexity flaw needing no privileges or user interaction, and because the plugin trusts user-identity and role HTTP headers without verifying they came from the trusted reverse proxy, PR:N is justified - an unauthenticated attacker can mint an administrator. The decision framework agrees on urgency (vuln.today Decision label = act_now) and a fix is available, which argues for prompt patching. However, the signals partly conflict: EPSS is only 0.14% (3rd percentile), there is no CISA KEV listing (not actively exploited per that source), and the PoC is a WPScan reference not verified as working exploit code - so this is high-severity-with-trivial-mechanics but not yet evidence of widespread active exploitation. Real-world risk is further bounded by deployment footprint: the Datawiza Proxy Auth Plugin is a niche identity/reverse-proxy integration plugin, not a ubiquitous component, so exposure is limited to the specific sites running it. Net: treat as a genuine act_now priority for any site running the affected plugin (full takeover with no auth), but the low EPSS and absence of KEV suggest the overall internet-wide exploitation volume is currently low rather than mass-scanned. |
| Exploit ScenarioDerived | An attacker sends a crafted HTTP request directly to a WordPress site running the vulnerable Datawiza Proxy Auth Plugin, injecting the user-identity and role headers the plugin trusts; because the plugin never confirms those headers originated from the trusted reverse proxy, the request is authenticated as an administrator and the attacker can create an admin account and take over the site. The CVSS vector (AV:N/AC:L/PR:N/UI:N) indicates this needs only network reach and no authentication or user interaction. A public PoC reference exists via WPScan but it is not verified as working exploit code. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 26, 2026
Unauthenticated privilege escalation in the Datawiza Proxy Auth Plugin for WordPress lets a remote attacker forge the user-identity and role HTTP headers the plugin consumes and thereby create and authenticate as a WordPress administrator, giving full control of the site (CVSS 3.1 base 9.8, AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). The disclosed affected range is 1.1.0 up to but not including 1.1.1, and the vendor has released 1.1.1 as the fix. Practical exploitability is topology-dependent: forged headers are only honored if externally supplied copies actually reach the plugin, so a correctly configured front-end proxy that strips or overwrites these headers blocks the attack. A public PoC reference exists but is not verified as working exploit code, and EPSS is low at 0.14% (3rd percentile) despite the maximal severity score, so the vulnerability.today decision label is act_now on the basis of impact rather than observed exploitation.
RemediationAI
Vendor-released patch: upgrade the Datawiza Proxy Auth Plugin to version 1.1.1, which is the first release outside the disclosed affected range (1.1.0 to before 1.1.1); installation details are in the WPScan advisory at https://wpscan.com/vulnerability/2c6c7d10-2281-4a98-a0d6-769da5cce416/. Given the act_now priority and the fact that a single forged request can yield administrator access, treat the upgrade as immediate rather than scheduled. Where an update cannot be applied at once, the effective interim control is topological: configure the front-end reverse proxy to strip and re-inject, rather than pass through, any client-supplied user-identity and role headers, accepting that the plugin's header contract must be re-validated against the new proxy rules and that any client sending those headers through a path that bypasses the proxy remains exposed. Complementarily, restrict direct access to the WordPress origin (firewall, listener binding, or proxy-only routing) so requests cannot skip the header-sanitizing proxy, with the trade-off that direct administrative, health-check and internal integration access must be re-routed through the proxy or explicitly allowlisted. Note that suppressing the headers entirely will disable the plugin's SSO path until 1.1.1 is installed.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The plugin implements header-based authentication behind a reverse proxy or identity-aware proxy: the front end authenticates the user and forwards assertions about identity and role as HTTP request headers, which the plugin then trusts to map the request onto a WordPress user, including an administrator. The flaw is CWE-269 (Improper Privilege Management) - the plugin consumes those headers without establishing that they originated from the trusted proxy (no verification of the header's origin such as a shared secret, signed assertion, or source allowlist). Any client that can get its own copies of the identity and role headers to WordPress therefore speaks with the plugin's full authority, and because no credentials or prior session are needed the vector has PR:N. The trust boundary is the deciding factor: in a deployment where the front proxy overwrites or strips inbound copies of these headers, forged values never arrive; where the plugin is reachable directly or the proxy passes headers through, they do. The specific header names and exact request format are not described in the available sources. CPE data is a wildcard entry (cpe:2.3:a:unknown:datawiza_proxy_auth_plugin) with no vendor or version granularity, so the affected range is taken from the ENISA EUVD record (1.1.0 to before 1.1.1) and the WPScan-published plugin advisory.
Know when Datawiza Proxy Auth Plugin gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Plugin trusts identity/role headers without verifying proxy origin, so a remote unauthenticated attacker spoofs them for full admin takeover - AV:N/AC:L/PR:N/UI:N with full CIA impact.
Primary rating from Vendor (WPScan).
CVSS VectorVendor: WPScan
Lifecycle Timeline
4DescriptionCVE.org
The Datawiza Proxy Auth Plugin WordPress plugin before 1.1.1 does not verify that the user-identity and role HTTP request headers it trusts originate from a trusted reverse proxy, allowing unauthenticated attackers to create and authenticate as a WordPress administrator.
Technical POC Analysis
The bug class is CWE-269, Improper Privilege Management.
Full technical POC analysis - root cause, step-by-step exploitation and patch breakdown - is part of the Pro and Business plans.
Executive ViewAI
CVE-2026-115214 is a critical unauthenticated privilege escalation vulnerability in the Datawiza Proxy Auth Plugin for WordPress (versions 1.1.0 before 1.1.1) that allows remote attackers to forge HTTP headers and gain full administrative control of affected WordPress sites. This impacts any organization using this plugin on public-facing sites, potentially leading to complete site compromise, data theft, and reputational damage. Leadership should prioritize immediate remediation due to the severe business consequences, even though no active exploitation has been confirmed.
Apply vendor patch.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Privilege escalation occurs when an attacker leverages flaws in access control mechanisms to gain permissions beyond what they were originally granted.
EUVD-2026-109352
GHSA-h3j8-jgx9-4qjv
NVD
CVE.org
EPSS
Vulnrichment
Exploit-DB