Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessAuthenticate with management tag + vhost access
-
DeliverySend create super-stream request to stream-management HTTP API
-
ExploitMissing configure-permission check bypassed
-
ExecutionBroker provisions exchange + partition queues + bindings
-
ImpactPersistent cluster-wide resources created without authorization
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A01:2025 - Broken Access Control
ASVS 5.0
V8 - Authorization Authorization checks on every request
MITRE ATT&CK
1 technique across 1 tactic: Privilege Escalation The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires the rabbitmq_stream_management plugin to be enabled (non-default) and an authenticated account holding the management tag plus access to the target vhost - but notably NO configure permission on any resource. The specific flaw is that accept_content/2 (line 56) calls rabbit_stream_manager:create_super_stream directly after is_authorized, which only verifies the management tag and vhost access via is_authorized_vhost; the HTTP path entirely omits the rabbit_stream_utils:check_super_stream_management_permitted/4 call that the native stream-protocol reader performs to enforce configure on the exchange and each partition queue. Limiting factors: authentication is mandatory (management tag), the stream-management plugin must be enabled, and impact is confined to unauthorized creation of persistent stream resources (integrity only) with no data disclosure or denial of service. |
| Impact | This is a genuine but low-impact authorization flaw (CWE-862 missing authorization), not a high-severity issue. The vendor CVSS 4.0 base score is 2.1 (AV:N/AC:L/AT:P/PR:H/UI:N/VI:L), and every signal points to low real-world risk: it is authenticated (PR:H in the vendor vector; the description confirms a valid user with the management tag and vhost access is required), it has zero confidentiality and availability impact (VC:N/VA:N), and only limited integrity impact (VI:L) - the ability to create super-streams (an exchange plus N partition stream queues and bindings) despite lacking configure permission. There is no EPSS score, no CISA KEV listing, and no public POC in the provided data, so exploitation status is: no public exploit identified at time of analysis. The one nuance worth flagging: the vendor rates PR:H, but the management tag is a mid-tier RabbitMQ role rather than administrator, so PR:L is arguably more accurate - this raises the theoretical score slightly but does not change the priority. The AT:P attack requirement is justified because the rabbitmq_stream_management plugin must be enabled (non-default). Bottom line: a real privilege-escalation-from-'can view'-to-'can create persistent resources' bug worth patching in routine maintenance, but not an emergency; the low integrity impact and authenticated, plugin-gated precondition make it low priority. |
| Exploit ScenarioDerived | An authenticated RabbitMQ user who has only the management tag and vhost access - but deliberately was NOT granted configure permission on any resource - sends a crafted request to the stream-management HTTP API to create a super-stream. Because the HTTP handler omits the check_super_stream_management_permitted authorization call that the native stream protocol enforces, the broker creates an exchange, N partition stream queues, and bindings cluster-wide, letting the user provision persistent resources they should not be able to create. No public POC is identified in the provided data. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Sep 23, 2026
RabbitMQ stream-management HTTP API allows an authenticated user holding the management tag and vhost access - but no configure permission on any resource - to create super-streams, which consist of an exchange, N partition stream queues, and their bindings, without the per-resource authorization check the native stream protocol path enforces. This is a genuine but low-impact authorization flaw (CWE-862 missing authorization) rated CVSS 2.1 by the vendor and an assessed CVSS:3.1 of AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N, since the impact is confined to unauthorized integrity changes (persistent resource creation) with no data disclosure or denial of service. Exploitation requires the non-default rabbitmq_stream_management plugin to be enabled and a management-tagged account with vhost access; no KEV listing or public exploit was identified, and vendor fixes are available in 4.0.22, 4.1.11, 4.2.6, and 4.3.0.
RemediationAI
Upgrade to the fixed releases - 4.0.22, 4.1.11, 4.2.6, or 4.3.0 - which restore the per-resource configure check on the HTTP super-stream creation path via the rabbit_stream_utils:check_super_stream_management_permitted/4 logic; see GHSA-34jw-rm7g-hph4 (https://github.com/rabbitmq/rabbitmq-server/security/advisories/GHSA-34jw-rm7g-hph4) and the v4.2.6 (https://github.com/rabbitmq/rabbitmq-server/releases/tag/v4.2.6) and v4.3.0 (https://github.com/rabbitmq/rabbitmq-server/releases/tag/v4.3.0) release tags. If immediate patching is not possible, disable the rabbitmq_stream_management plugin (rabbitmq-plugins disable rabbitmq_stream_management), which removes the vulnerable HTTP endpoint at the cost of losing stream-management HTTP features, or at minimum restrict and audit management-tagged accounts with vhost access so they are limited to operators who genuinely need them, and restrict HTTP API access to trusted networks since the flaw requires authenticated management-tag credentials. Note that no KEV listing or publicly available exploit code was identified, and the residual impact of pre-patch abuse is limited to unauthorized creation of persistent stream resources.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 3 packages in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
RabbitMQ's HTTP management API (accept_content/2 around line 56) handles super-stream creation by calling rabbit_stream_manager:create_super_stream directly after is_authorized, which only validates the management tag and vhost access via is_authorized_vhost. The native stream-protocol handler in rabbit_stream_reader.erl instead calls rabbit_stream_utils:check_super_stream_management_permitted/4, enforcing configure permission on the super-stream exchange and on each partition stream queue before creation. Because the HTTP path omits that call entirely, the two code paths diverge and the HTTP handler fails to enforce authorization for privileged resource creation - a classic CWE-862 Missing Authorization. The exposure is bounded by the CVSS 4.0 vector (AT:P, PR:H) reflecting the plugin-enabled precondition and the requirement for an authenticated management-tagged principal; impact is integrity-only (creation of persistent cluster-wide resources such as exchanges, partition stream queues, and bindings) with no confidentiality or availability effect.
Know when Rabbitmq gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
CVSS:4.0/AV:N/AC:L/AT:P/PR:H/UI:N/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N
Network-reachable HTTP API, authenticated management-tag user (PR:L not PR:H, since not admin), low integrity impact from unauthorized resource creation, no confidentiality or availability effect.
Primary rating from Vendor (GitHub_M).
CVSS VectorVendor: GitHub_M
Lifecycle Timeline
2DescriptionCVE.org
RabbitMQ is a messaging and streaming broker. Prior to versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0, accept_content/2 at line 56 calls rabbit_stream_manager:create_super_stream/... directly after is_authorized (which only checks the management tag + vhost access via is_authorized_vhost). The stream-protocol equivalent (rabbit_stream_reader.erl create_super_stream handler) calls rabbit_stream_utils:check_super_stream_management_permitted/4 which enforces configure on the exchange and each partition queue. The HTTP handler omits this call entirely. A user with management tag and vhost access , but no configure permission on any resource , can create super-streams (an exchange + N partition stream queues + bindings) via the HTTP API. The native stream-protocol path enforces configure on each resource; the HTTP path does not, creating a privilege escalation from 'can view' to 'can create persistent cluster-wide resources.' Preconditions include rabbitmq_stream_management plugin enabled management tag + vhost access (no resource permissions needed). This issue is fixed in versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.
Privilege escalation occurs when an attacker leverages flaws in access control mechanisms to gain permissions beyond what they were originally granted.
Sensitive credential disclosure in RabbitMQ affects installations running the management plugin with OAuth 2 configured
Pivotal RabbitMQ, versions 3.7.x prior to 3.7.21 and 3.8.x prior to 3.8.1, and RabbitMQ for Pivotal Platform, 1.16.x ver
Denial of service in the RabbitMQ Java client library (com.rabbitmq:amqp-client ≤ 5.30.0) allows a malicious or compromi
An issue was discovered in Pivotal RabbitMQ 3.x before 3.5.8 and 3.6.x before 3.6.6 and RabbitMQ for PCF 1.5.x before 1.
Parsing desynchronization in the RabbitMQ amqp091-go AMQP 0.9.1 client library before 1.13.0 lets a malicious or comprom
RabbitMQ's amqp091-go Go client library, in all versions before 1.13.0, builds TLS configuration from amqps:// URIs with
RabbitMQ is a multi-protocol messaging broker. Rated medium severity (CVSS 5.4), this vulnerability is remotely exploita
RabbitMQ brokers that use the OAuth2 plugin can silently fall back to disabled TLS certificate verification when no CA b
Silent AMQP 0.9.1 metadata corruption in the RabbitMQ amqp091-go Go client library prior to 1.13.0 lets an application t
TLS client-authentication bypass in the RabbitMQ trust-store plugin lets a remote unauthenticated attacker whose forged
TLS certificate validation is completely bypassed in the RabbitMQ Java client library (`com.rabbitmq:amqp-client`) prior
Denial of service in the official RabbitMQ Go client library amqp091-go (versions prior to 1.13.0): a malicious, comprom
EUVD-2026-85663
NVD
CVE.org
EPSS
Vulnrichment
GitHub
VulDB
Exploit-DB