Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessCraft malicious XSS link/page
-
DeliveryDeliver to victim via phishing or lure
-
ExploitVictim clicks and loads reflected payload
-
ExecutionScript executes in site context
-
ImpactHijack session or perform actions as victim
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A05:2025 - Injection
ASVS 5.0
V1 - Encoding and Sanitization Output encoding, context-aware escaping
MITRE ATT&CK
2 techniques across 2 tactics: Initial Access, Execution The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires user interaction (UI:R): a victim must click an attacker-crafted link or visit a malicious page that reflects the XSS payload through the Ansar Import plugin (versions <= 2.1.2) on a target WordPress site. No authentication is required of the attacker (PR:N), but the limiting factors are the mandatory victim interaction and the need for the vulnerable plugin to be installed and active; impact is confined to script execution in the victim's browser session rather than direct server compromise. The exact triggering parameter is not specified in the available data. |
| Impact | This is a reflected/unauthenticated Cross-Site Scripting flaw (CWE-79) in the Ansar Import WordPress plugin. The CVSS 3.1 vector (AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:L, 7.1 High) reflects network reachability and no privilege requirement (PR:N, unauthenticated), but crucially requires user interaction (UI:R) - a victim must be lured into clicking a crafted link or visiting a malicious page, which materially lowers real-world exploitability versus a no-interaction flaw. The scope change (S:C) and low C/I/A impacts are consistent with XSS executing in the victim's browser context rather than directly on the server. No EPSS score, CISA KEV listing, POC, or SSVC data was supplied, so there is no evidence of active exploitation or automatable mass-attack; all exploitation signals are absent rather than conflicting. On balance this is a moderate-priority issue: a genuine, remotely reachable XSS worth patching, but the mandatory user interaction and the plugin's apparent niche footprint argue against treating it as an urgent, widely-exploited threat. Note the A:L (availability impact) in the supplied vector is atypical for reflected XSS and may be a vendor scoring convention rather than a true availability effect. |
| Exploit ScenarioDerived | An attacker crafts a malicious URL or web page containing a scripted payload targeting the vulnerable Ansar Import endpoint and lures an authenticated administrator or site visitor into clicking it. When the victim's browser processes the reflected response, the attacker's JavaScript executes in the site's context, enabling session/cookie theft or actions on the victim's behalf. No public exploit code was identified at time of analysis, and successful exploitation depends on the victim taking the interaction. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 06, 2026
Reflected cross-site scripting in the Ansar Import - One Click Starter Sites - for Elementor & Themes WordPress plugin (versions up to and including 2.1.2) lets an unauthenticated attacker inject arbitrary script that executes in a victim's browser session once the victim clicks a crafted link or visits a malicious page. The flaw is rated CVSS 7.1 (AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N per independent assessment) - no attacker authentication is required, but exploitation depends on convincing a user to interact, and impact is confined to the victim's browser rather than the server. There is no confirmed active exploitation (not in CISA KEV) and no public exploit code identified at time of analysis; Patchstack is credited with the report.
RemediationAI
No vendor-released patch or fixed version is identified in the available data at time of analysis, so the immediate action is to deactivate and, if unused, remove the Ansar Import plugin from every WordPress installation at version 2.1.2 or earlier - this eliminates the attack surface entirely but disables the one-click starter-site import workflow, so affected site owners should plan an alternative import method (manual demo-content import, staging-site cloning, or a maintained importer). Monitor the plugin's WordPress.org repository and the Patchstack advisory at https://patchstack.com/database/wordpress/plugin/ansar-import/vulnerability/wordpress-ansar-import-one-click-starter-sites-for-elementor-themes-plugin-2-1-2-cross-site-scripting-xss-vulnerability?_s_id=cve for a patched release, and upgrade immediately once a version above 2.1.2 is published. Where the plugin must remain active, deploy a web application firewall with XSS signatures covering the plugin's admin-ajax and query-string parameters (a compensating control only - bypasses are possible and legitimate traffic may be filtered), add a Content-Security-Policy header such as script-src 'self' to limit inline script execution (may break themes or plugins that rely on inline JavaScript), and restrict access to plugin import endpoints to trusted administrators. Because exploitation requires a victim to click an attacker-crafted link, user awareness of phishing-style links and prompt patching of any future fixed release remain the most effective short-term controls.
Affected VersionsENISA
Affected Packages
Source: OSV (Open Source Vulnerabilities)
Affects your stack
Affects 1 package in euvd
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The affected component is a WordPress plugin (CPE cpe:2.3:a:themeansar:ansar_import_-_one_click_starter_sites_-_for_elementor_&_themes) that provides one-click import of starter site templates and demo content for Elementor and block themes. The root cause is CWE-79 (Improper Neutralization of Input During Web Page Generation / Cross-Site Scripting): user-supplied input reaches an HTTP response without adequate output encoding or sanitization, so markup such as script tags or event handlers is rendered and executed by the browser in the context of the target WordPress site. The CVSS vector (AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N) confirms a network-reachable, low-complexity issue requiring no attacker credentials but requiring victim interaction, with scope change because the injected script runs in the victim site's origin. Neither the public description nor the Patchstack advisory names the specific vulnerable parameter or hook, so the exact injection point is not established from available data; the plugin must be installed and active on the target site for the vulnerability to be reachable.
Know when Wordpress Plugin gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:L
Network-reachable unauthenticated reflected XSS needing victim interaction (UI:R) with cross-context script execution (S:C, C:L/I:L); availability set N as XSS has no real availability impact.
Primary rating from Vendor (Patchstack).
CVSS VectorVendor: Patchstack
DescriptionCVE.org
Unauthenticated Cross Site Scripting (XSS) in Ansar Import - One Click Starter Sites - for Elementor & Themes <= 2.1.2 versions.
Executive ViewAI
The Ansar Import - One Click Starter Sites - for Elementor & Themes WordPress plugin (versions up to and including 2.1.2) contains a high-severity reflected cross-site scripting vulnerability that allows unauthenticated attackers to execute malicious scripts in a victim's browser via a crafted link. Organizations using this plugin on public-facing WordPress sites may face reputational damage and loss of visitor trust if exploited, though no public exploit has been identified at this time. Leadership should prioritize remediation to protect site visitors and maintain brand integrity.
Disable or remove the plugin if not essential; implement WAF rules to block XSS; enforce a strict Content Security Policy; restrict access to the plugin's files or admin area; conduct user awareness training on phishing links.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Cross-Site Scripting occurs when an application accepts untrusted data and sends it to a web browser without proper validation or encoding.
More in Wordpress Plugin
View allThe Backup Migration plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1
The Hash Form - Drag & Drop Form Builder plugin for WordPress is vulnerable to arbitrary file uploads due to missing fil
Authentication bypass in the LiteSpeed Cache WordPress plugin (versions prior to 6.5.0.1) allows unauthenticated remote
The Simple File List plugin for WordPress through version 4.2.2 contains an unauthenticated remote code execution vulner
The SureTriggers WordPress plugin through version 1.0.82 contains a privilege escalation vulnerability that allows unaut
The Ninja Forms plugin before 2.9.42.1 for WordPress allows remote attackers to conduct PHP object injection attacks via
The Business Directory Plugin - Easy Listing Directories for WordPress plugin for WordPress is vulnerable to time-based
SQL injection in the NotificationX WordPress plugin (versions up to and including 2.8.2) allows unauthenticated remote a
The POST SMTP Mailer - Email log, Delivery Failure Notifications and Best Mail SMTP for WordPress plugin for WordPress i
The MasterStudy LMS WordPress Plugin - for Online Courses and Education plugin for WordPress is vulnerable to union base
The Email Subscribers by Icegram Express plugin for WordPress is vulnerable to SQL Injection via the ‘hash’ parameter in
Remote code execution in the WP Query Console WordPress plugin (versions up to and including 1.0) by Ajit Bohra allows u
EUVD-2026-93027
GHSA-m3w4-cwrm-66cg
NVD
CVE.org
EPSS
Vulnrichment
Exploit-DB