Skip to main content

Dokan Marketplace CVE-2026-16565

| EUVDEUVD-2026-52185 MEDIUM
Authorization Bypass Through User-Controlled Key (CWE-639)
2026-08-03 WPScan GHSA-cjjh-8xvm-fchv
4.3
CVSS 3.1 · Vendor: WPScan
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Register or obtain Dokan vendor account
  2. Delivery
    Enumerate target vendor's product IDs via public store listings
  3. Exploit
    Craft REST API write request with victim product ID
  4. Execution
    Submit request to Dokan product-attribute endpoint
  5. Impact
    Server applies unauthorized attribute changes to victim product

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A01:2025 - Broken Access Control
ASVS 5.0
V8 - Authorization Object-level authorization, IDOR prevention
Exploitation Conditions

Exploitation requires the attacker to hold an active Dokan vendor account (authenticated, low-privilege - PR:L per CVSS) on the target marketplace instance. The vulnerable code path is specifically the product-attribute and default-attribute REST write endpoints exposed by the Dokan plugin; the plugin must be installed and active on a WooCommerce site running a version prior to 5.0.9. No special server-side configuration beyond a standard Dokan installation is needed. Exploitation is limited by the vendor account prerequisite - unauthenticated or subscriber-level users cannot exploit this flaw. Marketplaces with open or free vendor registration are at elevated risk since the barrier to obtaining the required privilege level is minimal.

Impact

The NVD CVSS 3.1 score of 4.3 (Medium) with vector AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N accurately reflects the bounded impact: network-reachable, low complexity, but gated behind a vendor account (PR:L), with only integrity impact and no data exfiltration or denial-of-service potential. The EPSS score of 0.13% at the 3rd percentile suggests very low observed exploitation pressure despite the availability of a public PoC, likely because the attack surface requires an active vendor registration on each targeted marketplace instance. No CISA KEV listing confirms no mass exploitation detected at time of analysis. The realistic risk is highest for marketplaces with open or low-barrier vendor registration, where a malicious actor could self-register and immediately abuse the endpoint to tamper with competitor product listings - a meaningful business integrity risk even if technical severity is moderate. No signal conflicts between CVSS, EPSS, and KEV status are present.

Exploit ScenarioDerived

An attacker registers or already holds a vendor account on a target Dokan-powered WooCommerce marketplace. Using the publicly available PoC from WPScan, the attacker sends a crafted REST API PATCH or PUT request to the product-attribute write endpoint, substituting a competitor's product ID in place of their own. The server applies the attribute changes without verifying ownership, allowing the attacker to corrupt or manipulate a competitor's product variants, potentially degrading listing quality or causing incorrect product options to appear to buyers.

This Month Plan within 30 days. Why: MEDIUM severity (CVSS 4.0-6.9).
Patch available 0.1% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Aug 03, 2026

Broken object-level authorization in the Dokan WordPress plugin (versions before 5.0.9) allows any authenticated vendor on a multivendor marketplace to overwrite product attributes and default attributes belonging to other vendors via the plugin's REST API write endpoints. Exploitation requires only a low-privilege vendor account - no admin access needed - making this accessible to any registered seller on the platform. A publicly available proof-of-concept exists per WPScan, though EPSS sits at 0.13% (3rd percentile), indicating limited observed exploitation activity so far; the vulnerability is not listed in CISA KEV.

RemediationAI

Upgrade the Dokan plugin to version 5.0.9 or later, which introduces ownership verification on the product-attribute REST write endpoints. The patch is available from the vendor and should be applied immediately via the WordPress plugin update mechanism or by downloading directly from the plugin repository. If immediate patching is not possible, site administrators should consider restricting vendor REST API access at the web server or WAF layer by blocking write requests to the Dokan product-attribute REST routes (e.g., paths matching /wp-json/dokan/*/products/*/attributes) for all but trusted IP ranges - though this may disrupt legitimate vendor operations. Alternatively, temporarily suspending open vendor registration to limit the attacker pool reduces exploitation surface until the patch is applied. Neither workaround eliminates the underlying flaw, and patching to 5.0.9 remains the definitive fix.

Affected VersionsENISA

Dokan: AI Powered WooCommerce Multivendor Marketplace Solution 0 <5.0.9

Affected Packages

euvd dokan_ai_powered_woocommerce_multivendor_marketplace_solution fix: 5.0.9

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

Dokan is a WooCommerce extension that converts a standard WordPress e-commerce store into a multivendor marketplace, where independent vendors manage their own product listings. The plugin exposes REST API write endpoints for managing WooCommerce product attributes (taxonomies used for variants such as size, color, etc.) and default attribute assignments. CWE-639 (Authorization Bypass Through User-Controlled Key) is the root cause: the endpoint accepts a product or attribute ID supplied by the caller but fails to validate that the authenticated vendor actually owns the referenced product before applying changes. An attacker can substitute a product ID belonging to a different vendor and the server will process the modification without ownership verification. The affected CPE is cpe:2.3:a:unknown:dokan:_ai_powered_woocommerce_multivendor_marketplace_solution:*:*:*:*:*:*:*:* covering all versions up to but not including 5.0.9.

Know when Dokan gets its next vulnerability

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (WPScan) PRIMARY 4.3 MEDIUM
AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N
vuln.today AI 4.3 MEDIUM

Network-reachable REST endpoint (AV:N), trivial to exploit once authenticated (AC:L), vendor account required (PR:L), no confidentiality or availability impact - only product attribute integrity is affected.

3.1 AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N
4.0 AV:N/AC:L/AT:N/PR:L/UI:N/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N

Primary rating from Vendor (WPScan).

CVSS VectorVendor: WPScan

Attack Vector
Network
Attack Complexity
Low
Privileges Required
Low
User Interaction
None
Scope
Unchanged
Confidentiality
None
Integrity
Low
Availability
None

Lifecycle Timeline

4
CVSS changed
Aug 03, 2026 - 18:22 NVD
4.3 (MEDIUM)
Patch available
Aug 03, 2026 - 07:01 EUVD
CVE Published
Aug 03, 2026 - 06:00 cve.org
UNKNOWN (no severity yet)
CVE Published
Aug 03, 2026 - 06:00 cve.org
MEDIUM 4.3

DescriptionCVE.org

The Dokan: AI Powered WooCommerce Multivendor Marketplace Solution WordPress plugin before 5.0.9 does not verify product ownership on its product-attribute REST write endpoints, allowing users with a Dokan vendor account to modify the product attributes and default attributes of any other vendor's products on the marketplace.

Threat Intelligence Overview

EPSS Score
0.1%
Top 97% exploitable
Prevalence
Medium
popular WooCommerce multivendor marketplace plugin with significant install base
Exploit
POC
Public exploit code exists
Data Quality
5 sources
Confidence: Medium

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity MEDIUM
CISA KEV No
Public POC Yes
EPSS 0.1%
Patch available Yes
Active threat No
Deciding rule
MEDIUM severity (CVSS 4.0-6.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Scheduled
Exploitation
None
System Exposure· derived
Open
Automatable
No
Human Impact· derived
Medium
Technical Impact
Partial

Priority Score

42
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +22
PoC: +20
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.

More in Dokan

View all
CVE-2024-3922 CRITICAL POC
10.0 Jun 13

The Dokan Pro plugin for WordPress is vulnerable to SQL Injection via the 'code' parameter in all versions up to, and in

CVE-2022-3915 CRITICAL POC
9.8 Dec 12

The Dokan WordPress plugin before 3.7.6 does not properly sanitise and escape a parameter before using it in a SQL state

CVE-2026-16576 HIGH POC
7.2 Aug 21

Improper access control in the Dokan WooCommerce Multivendor Marketplace WordPress plugin before 5.0.14 enables authenti

CVE-2026-16574 MEDIUM POC
5.4 Aug 08

Dokan's WooCommerce multivendor marketplace WordPress plugin (versions before 5.0.11) exposes a broken object-level auth

CVE-2026-16575 MEDIUM POC
5.3 Aug 21

Unauthenticated information disclosure in Dokan WooCommerce Multivendor Marketplace plugin (versions before 5.0.14) allo

CVE-2026-107645 CRITICAL
9.1 Oct 10

Unauthenticated privilege escalation in the Blocksy Companion WordPress plugin (versions up to and including 2.1.58) all

CVE-2026-8761 HIGH
8.8 Aug 05

Privilege escalation in Dokan (WordPress multivendor marketplace plugin) versions up to and including 5.0.1 enables any

CVE-2026-24359 HIGH
8.8 Mar 25

An authentication bypass vulnerability exists in Dokan (Dokan, Inc.) dokan-lite plugin versions through 4.2.4 that allow

CVE-2026-49780 HIGH
8.8 Jun 15

Privilege escalation in Dokan WordPress plugin versions 5.0.2 and earlier allows authenticated low-privileged customer a

CVE-2026-16564 MEDIUM POC
4.3 Aug 03

Order ownership bypass in Dokan Multivendor for WordPress (versions before 5.0.9) allows any authenticated vendor to mod

CVE-2020-36748 MEDIUM POC
4.3 Jul 01

The Dokan plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 3.0.8. Rate

CVE-2026-65493 HIGH
7.5 Jul 23

PHP Object Injection in the Dokan Pro WordPress plugin (versions 5.0.2 and earlier) allows an authenticated user holding

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy