Attack ChainAIDerived
Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain
-
AccessCraft malicious link with javascript: payload in 'next' param
-
DeliveryDeliver link to authenticated operator via phishing
-
ExploitVictim clicks link in logged-in session
-
ExecutionRedirect route assigns value to location.href bypassing URL validation
-
ImpactArbitrary JavaScript executes in user's session context
Vulnerability Assessment
| Weakness |
CWE
OWASP Top 10:2025
A05:2025 - Injection
ASVS 5.0
V1 - Encoding and Sanitization Output encoding, context-aware escaping
MITRE ATT&CK
2 techniques across 2 tactics: Initial Access, Execution The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up. |
| Exploitation Conditions | Exploitation requires the specific redirect route of the Ansible Platform UI that reads the 'next' query parameter and assigns it to location.href without applying the platform's built-in URL/scheme validation (the validation that normally blocks javascript:, data:, off-site, and protocol-relative redirects). The attack is limited by two concrete factors: (1) the victim must already be an authenticated user of the Ansible Platform UI (PR:L), and (2) the victim must actively click the attacker-supplied link (UI:R) - it cannot be triggered automatically against a passive or unauthenticated target. No special server configuration toggle is described; the flaw stems from this one route bypassing the otherwise-present validation controls. |
| Impact | This is a moderate, not top-priority, issue. The CVSS 3.1 base score of 5.4 (AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N) reflects the realistic constraints: although network-reachable and low-complexity, exploitation requires an already-authenticated victim (PR:L in the vendor vector) AND active user interaction (UI:R) - the victim must click an attacker-crafted link while logged into the Ansible Platform UI. The scope change (S:C) and Low confidentiality/integrity impact correctly capture that injected JavaScript runs in the victim's browser session rather than compromising the server directly. No EPSS score, no CISA KEV entry, and no public proof-of-concept were provided in the intelligence, so there is no public exploit identified at time of analysis and no evidence of active exploitation; this is a vendor-reported (Red Hat) defect rather than a signal-rich, widely-exploited threat. The signals are internally consistent - there is no conflict between a network vector and the described browser-side DOM XSS. Net: patch as part of normal cycles for internet-facing or multi-user deployments, but this does not warrant emergency, out-of-band remediation absent new exploitation signals. |
| Exploit ScenarioDerived | An attacker crafts a malicious link to the Ansible Platform UI redirect route, embedding a javascript: or similar payload in the 'next' query parameter, and sends it (via phishing/chat) to an authenticated operator. When the logged-in user clicks it, the unvalidated value is assigned to location.href and arbitrary JavaScript executes in their authenticated session, enabling session-context actions or data theft. No public proof-of-concept was identified at the time of analysis. |
Get an e-mail when this CVE is exploited, patched or re-scored. Free account.
Alert meAnalysisAIv1 – Oct 06, 2026
DOM-based cross-site scripting in the Red Hat Ansible Automation Platform UI allows an attacker-crafted link to execute arbitrary JavaScript inside a logged-in user's session, because a specific redirect route takes the destination from the 'next' query parameter and assigns it straight to the browser's location.href while bypassing the platform's own URL and scheme validation. Exploitation is constrained by two concrete prerequisites: the victim must already be authenticated to the platform UI (PR:L) and must actively click the malicious link (UI:R), which is why the issue carries a moderate CVSS 3.1 base score of 5.4 rather than a critical rating. No public exploit code and no confirmed active exploitation were identified at the time of analysis, and the risk is best characterized as a moderate, not top-priority, issue that should be scheduled rather than emergency-patched.
RemediationAI
No fix version is specified in the available data, so patch status is not confirmed from the provided inputs and administrators should track the Red Hat advisory at https://access.redhat.com/security/cve/CVE-2026-106033 and Bugzilla bug 2546603 for the exact errata and affected-version matrix before planning an upgrade. The most direct code-level fix is to route the offending redirect handler through the platform's existing URL validation helper so that javascript:, data:, off-site and protocol-relative destinations in the 'next' parameter are rejected - this is a narrow change with no expected functional downside for legitimate deep links. Until an errata is available, practical compensating controls include blocking or stripping requests whose 'next' parameter contains a scheme or scheme-relative value (a WAF or reverse-proxy rule matching javascript:, data:, or a leading double slash), with the trade-off that overly broad rules can break legitimate post-login deep-link redirects, so the rule should be tested against normal login flows. Deploying a Content-Security-Policy that disallows inline and eval-style script execution limits the reach of the injected payload, but tuning must be validated because a strict script-src can break single-page application bundles if the UI relies on inline bootstrap scripts. Because exploitation requires an authenticated victim to click a crafted link, restricting UI access to trusted networks or VPN and reinforcing user guidance against following unsolicited links to the platform are low-cost, low-risk mitigations with limited operational side effects.
Affects your stack
Find out whether the stacks and servers you run are on an affected version.
Checking this CVE against your own stacks and servers is part of the Basic plan and up.
Technical ContextAI · show details
The root cause is CWE-79 (Improper Neutralization of Input During Web Page Generation) manifesting specifically as DOM-based XSS in a single-page application redirect handler. Rather than server-side reflection, the sink is client-side JavaScript: the redirect route reads the 'next' query parameter and passes it directly to location.href without sanitization. Red Hat's platform already ships URL validation helpers intended to reject dangerous schemes (javascript:, data:) and off-site or protocol-relative destinations (for example //evil.example), but this particular route does not invoke them, so the guardrail is inert on that code path. Because the injected script runs in the origin of the Ansible Automation Platform UI, the CVSS vector reflects a changed scope (S:C) - the script executes with the origin's privileges and can read page content, act on the authenticated session through the UI, or pivot to API calls the user is authorized to make, though confidentiality and integrity impacts are limited (C:L/I:L) and there is no availability impact. CPE data ties the affected codebase to Red Hat Ansible Automation Platform 2 (multiple entries with wildcard version ranges) and to Red Hat Hardened Images, indicating the flaw is resolved across several shipped product streams rather than a single build.
Know when Red Hat Ansible Automation Platform 2 gets its next vulnerability
- Watch products and get an email when something new is published
- Check this CVE against your own stack and servers
- Exploit and PoC references, threat intelligence from 22 sources
No credit card · 7-day full trial
Severity by source
AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N
Network-delivered link (AV:N), no special conditions (AC:L), the vulnerable redirect route sits inside the authenticated UI (PR:L), victim must click (UI:R), and script runs in the browser crossing a security boundary (S:C) with limited C/I and no availability impact.
Primary rating from Vendor (redhat).
CVSS VectorVendor: redhat
DescriptionCVE.org
A DOM-based Cross-Site Scripting (XSS) vulnerability exists in the Ansible Platform UI due to unvalidated input handling within the application's redirect route. Specifically, the application extracts a target destination from the next query parameter and directly assigns it to the browser's location.href without verifying its format or scheme. The platform includes built-in URL validation functions designed to block malicious URI schemes (such as javascript: and data:) as well as off-site or protocol-relative redirects, this specific route bypasses those controls. Consequently, an attacker can craft a malicious link that, when accessed by an authenticated user, causes arbitrary JavaScript to execute within the context of the user's session.
Threat Intelligence Overview
How this decision was reached
The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.
What every action level means
SSVC AssessmentENISA
Priority Score
Attack Technique
Cross-Site Scripting occurs when an application accepts untrusted data and sends it to a web browser without proper validation or encoding.
Affected Products (CPE)CVE.org
Missing authorization checks in the Red Hat Ansible Automation Platform 2 automation-controller allow an authenticated o
Authenticated users who hold permission to create or modify a project within a single organization can execute arbitrary
Privilege escalation and remote code execution on managed hosts is possible in Red Hat Ansible Automation Platform 2 bec
Credential disclosure in Red Hat Ansible Automation Platform 2.5 and 2.6 allows any authenticated user to retrieve plain
Server-side request forgery in the Red Hat Ansible Automation Platform 2 Controller's HashiCorp Vault credential plugin
Privilege escalation in Red Hat Ansible Automation Platform 2 (built on the AWX upstream project) lets an authenticated
Arbitrary file write in pulpcore's FilesystemExport feature allows an authenticated administrator to escape the intended
Symlink-following file overwrite on the Ansible control node is possible in ansible-core when a user runs `ansible-galax
Stored cross-site scripting in the automation-controller component of Red Hat Ansible Automation Platform 2 lets an auth
An authenticated automation-controller administrator in Red Hat Ansible Automation Platform 2 can turn the administrator
Jinja2 template injection in Ansible Operator Plugins (CWE-1336) lets an authenticated Kubernetes user who can create or
Missing object-level authorization in the JobTemplate copy endpoint (CopyAPIView) of AWX and Red Hat Ansible Automation
EUVD-2026-93781
GHSA-9628-c2gw-8cr5
NVD
CVE.org
EPSS
Vulnrichment
VulDB
Exploit-DB