Skip to main content

Oracle Agile EDM CVE-2026-101746

| EUVDEUVD-2026-106147 HIGH
Improper Access Control (CWE-284)
2026-10-20 secalert_us@oracle.com GHSA-8wjg-rh42-fghw
7.3
CVSS 3.1 · Vendor: oracle
View

Attack ChainAIDerived

Hypothetical attack flow derived from CVE metadata – not a confirmed exploit chain

  1. Access
    Gain foothold on adjacent network segment
  2. Delivery
    Stage crafted malicious content
  3. Exploit
    Induce victim interaction with content
  4. Execution
    Trigger unauthenticated flaw in Install component
  5. Impact
    Read and modify all EDM-accessible data

Vulnerability Assessment

Weakness
CWE
OWASP Top 10:2025
A01:2025 - Broken Access Control
ASVS 5.0
V8 - Authorization Access control enforcement
MITRE ATT&CK

1 technique across 1 tactic: Defense Evasion

The technique list with ATT&CK links and the kill-chain view is part of the Basic plan and up.

Exploitation Conditions

Exploitation requires the attacker to have access to the adjacent physical/logical communication segment attached to the hardware where Oracle Agile Engineering Data Management 6.2.1 runs (AV:A) - it is NOT exploitable from an arbitrary remote/internet location. Additionally, successful attacks require human interaction from a person other than the attacker (UI:R), meaning a legitimate user or operator must perform some triggering action. No authentication is needed (PR:N) and complexity is low (AC:L). The combined limiting factors - same-segment network adjacency plus required third-party user interaction - substantially narrow realistic exploitation to environments where untrusted devices share the LAN with the EDM host.

Impact

This is a genuinely serious but access-constrained flaw whose real-world risk sits below its 7.3 CVSS score for most environments. The CVSS vector confirms the key limiting factor: AV:A means the attacker must be on the adjacent/physical communication segment attached to the host (not routable from the internet), and UI:R means a separate human must perform some action for the attack to succeed. Offsetting those constraints, AC:L (low complexity) and PR:N (no authentication) make exploitation easy once network adjacency is achieved, and C:H/I:H give high confidentiality and integrity impact (full read plus create/delete/modify of all accessible data). No EPSS score, KEV listing, or public POC was provided, so there is no evidence of active or imminent exploitation; the absence of these signals plus the adjacent-network requirement argues against mass exploitation. Note a tagging conflict: the input Tags include 'Authentication Bypass,' but nothing in the Oracle description describes an authentication-bypass mechanism - the flaw is an unauthenticated adjacent-network attack requiring user interaction, so treat that tag as unverified. Net: patch in the normal Oracle CPU cycle; this is not an emergency for internet-exposed assets but matters where untrusted devices share the LAN segment with the EDM host.

Exploit ScenarioDerived

An attacker with a foothold on the same local network segment as the Oracle Agile Engineering Data Management server (e.g., a compromised workstation or rogue device on the LAN) stages a malicious payload or crafted content and waits for a legitimate user or operator to interact with it. That human interaction triggers the flaw, giving the unauthenticated attacker full read and write access to all EDM-accessible engineering data. No public exploit code was identified at time of analysis.

This Week Schedule remediation this week. Why: HIGH severity (CVSS 7.0-8.9).
No patch listed yet 0.2% exploitation probability (EPSS)

Get an e-mail when this CVE is exploited, patched or re-scored. Free account.

Alert me

AnalysisAIv1 – Oct 21, 2026

Oracle Agile Engineering Data Management 6.2.1 contains a high-impact confidentiality and integrity flaw in its Install component that unauthenticated attackers can exploit only from an adjacent network segment, and only if a non-attacker user performs a triggering action. Successful exploitation could let an attacker create, delete, or modify critical data and read all EDM-accessible data, but the adjacent-network and user-interaction prerequisites keep real-world risk below the 7.3 CVSS score for most deployments. No public exploit code or confirmed active exploitation was identified at time of analysis.

RemediationAI

Patch available per vendor advisory: apply the Agile Engineering Data Management fix from Oracle's October 2026 Critical Patch Update at https://www.oracle.com/security-alerts/cpuoct2026.html; the input does not give an exact patched build number, so confirm the applicable 6.2.1 update with Oracle support before deployment. Until patched, restrict network access to the EDM host and its Install and management interfaces so only trusted administrative hosts on the same segment can reach them, and isolate EDM systems on a dedicated VLAN with firewall rules blocking access from general user or untrusted device segments. Because exploitation requires a non-attacker user action, reduce exposure by preventing untrusted users from invoking installer or management workflows and by warning operators not to run unexpected EDM-related prompts. These controls may disrupt legitimate installation, upgrade, and administration workflows, and VLAN or firewall changes can break integrations that depend on same-segment access, so validate them in a staging environment.

Affected VersionsENISA

Oracle Agile Engineering Data Management 6.2.1

Affected Packages

euvd oracle_agile_engineering_data_management no fix

Source: OSV (Open Source Vulnerabilities)

Affects your stack

Affects 1 package in euvd

Checking this CVE against your own stacks and servers is part of the Basic plan and up.

Technical ContextAI · show details

Oracle Agile Engineering Data Management is an engineering data and product lifecycle management application, and the affected component is Install. The CVSS 3.1 vector AV:A/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:N shows the defect is not reachable from an arbitrary internet location: the attacker must be on the same physical or logical communication segment as the EDM host, can act without credentials, and faces low complexity, but a legitimate user other than the attacker must perform an action for exploitation to succeed. The input assigns no CWE; the Authentication Bypass tag suggests a trust or access-control weakness in the Install component, but the precise root cause is not disclosed. Impact is scoped to confidentiality and integrity with no availability impact, allowing unauthorized creation, deletion, or modification and full read access to EDM data. No CPE mapping or EPSS score was supplied.

Know when the next one hits your stack

  • Watch products and get an email when something new is published
  • Check this CVE against your own stack and servers
  • Exploit and PoC references, threat intelligence from 22 sources

No credit card · 7-day full trial

Severity by source

Vendor (oracle) PRIMARY 7.3 HIGH
AV:A/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:N
vuln.today AI 7.3 HIGH

Adjacent-segment access required (AV:A) and no authentication (PR:N) but a separate human must act (UI:R); high confidentiality and integrity impact, no availability effect (A:N).

3.1 AV:A/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:N
4.0 AV:A/AC:L/AT:N/PR:N/UI:P/VC:H/VI:H/VA:N/SC:N/SI:N/SA:N

Primary rating from Vendor (oracle).

CVSS VectorVendor: oracle

Attack Vector
Adjacent
Attack Complexity
Low
Privileges Required
None
User Interaction
Required
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
None

DescriptionCVE.org

Vulnerability in the Oracle Agile Engineering Data Management product of Oracle Supply Chain (component: Install). The supported version that is affected is 6.2.1. Easily exploitable vulnerability allows unauthenticated attacker with access to the physical communication segment attached to the hardware where the Oracle Agile Engineering Data Management executes to compromise Oracle Agile Engineering Data Management. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Agile Engineering Data Management accessible data as well as unauthorized access to critical data or complete access to all Oracle Agile Engineering Data Management accessible data. CVSS 3.1 Base Score 7.3 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:N).

Executive ViewAI

Why It Matters

Oracle Agile Engineering Data Management 6.2.1 carries an unpatched flaw in its Install component that could allow an attacker on an adjacent network segment to read the full contents of the EDM environment and to create, alter, or delete engineering records, provided a legitimate user triggers a required action. Engineering and product data integrity is therefore the primary exposure for the business, since corrupted or leaked design records can propagate into manufacturing, supplier, and quality processes. The dependency on local network positioning and user interaction limits the likelihood of exploitation, so leadership attention should focus on network segregation of the EDM estate rather than emergency response.

Business Impact: Medium
Compensating Controls

No vendor-released patch identified at time of analysis. Interim mitigations: strictly segment and firewall the EDM application and Install component so exposure is limited to trusted adjacent segments; enforce least-privilege EDM roles and remove unnecessary accounts; enable centralized audit logging and alerting for bulk reads, deletions, and configuration changes in EDM; maintain offline, integrity-verified backups with tested restore; brief users on the required user-interaction trigger and on reporting suspicious prompts; and open a vendor support case to obtain a fix timeline and any vendor-supplied workarounds.

Threat Intelligence Overview

EPSS Score
0.2%
Top 88% exploitable
Prevalence
Low
niche Oracle PLM engineering-data product, industry-specific footprint
Data Quality
4 sources
Confidence: Medium

How this decision was reached

The engine reads each signal below and applies a fixed list of rules from top to bottom. The first rule that matches sets the recommended action – like a statement, every line is shown.

SignalValue
Severity HIGH
CISA KEV No
Public POC No
EPSS 0.2%
Patch available No
Active threat No
Deciding rule
HIGH severity (CVSS 7.0-8.9)
What every action level means
Emergency Immediate action required. Criteria: CRITICAL + in CISA KEV (actively exploited) without patch, OR CRITICAL + EPSS > 30% without patch, OR CRITICAL + active threat signals without patch.
Act Now Prioritize within 24-48h. Criteria: in KEV with patch available, OR CRITICAL + public POC, OR HIGH + EPSS > 10%, OR CRITICAL + active threat, OR any CRITICAL severity.
This Week Schedule remediation this week. Criteria: HIGH severity (CVSS 7.0-8.9). Patch within normal change window.
This Month Plan within 30 days. Criteria: MEDIUM severity (CVSS 4.0-6.9), lower exploitation probability. Include in regular patch cycle.
Monitor Track and reassess. Criteria: LOW severity (CVSS 0.1-3.9), minimal exploitation risk. No immediate action needed.

SSVC AssessmentENISA

SSVC Decision· derived
Scheduled
Exploitation· derived
None
System Exposure· derived
Controlled
Automatable· derived
No
Human Impact
Medium

Priority Score

36
Low Medium High Critical
KEV: 0
EPSS: 0
CVSS: +36
PoC: 0
Weaponized: 0
Threat intel: 0
Gov advisory: 0

Attack Technique

Authentication bypass attacks exploit flaws in the verification mechanisms that control access to systems and applications.

This site uses cookies essential for authentication and security. No tracking or analytics cookies are used. Privacy Policy