In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace() sip_skip_whitespace() returns dptr unchanged when its own loop exhausts the buffer (dptr == limit), instead of NULL like its sibling sip_follow_continuation() returns on its own "no more data" path. ct_sip_get_header() only checks for NULL after calling it: dptr = sip_skip_whitespace(dptr, limit); if (dptr == NULL) break; if (*dptr != ':' || ++dptr >= limit) break; so a recognized header name followed only by spaces/tabs running to the exact end of the SIP payload, with no colon, makes the very next statement read one byte past the buffer. Make both "no more data" outcomes return NULL, matching the convention sip_follow_continuation() already uses and that both existing callers already check for.
In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix use-after-free on field name/type of events with multiple probes The fields of a probe-based dynamic event (kprobe, uprobe, eprobe and fprobe events) are created in traceprobe_define_arg_fields() by handing the probe_arg name/type strings to trace_define_field(), which only stores the pointers without copying. Those strings are owned by the trace_probe and are freed when that probe is removed. An event can have several probes attached. The field list is defined only once, by the first probe that registers the event, but it is kept alive by any surviving sibling probe. Deleting just that first probe by symbol - # primary A: fields are defined from A's args echo 'p:kprobes/ev vfs_read a1=$arg1' > kprobe_events # append B: shares A's event call echo 'p:kprobes/ev vfs_write a1=$arg1' >> kprobe_events # delete only A (matched by symbol), B survives echo '-:kprobes/ev vfs_read' >> kprobe_events frees A's args (trace_probe_cleanup() -> traceprobe_free_probe_arg()), but trace_probe_unlink() keeps the trace_probe_event because the probe list is not empty. The event call stays registered via B while its fields now reference freed memory. Any field lookup then reads it, e.g. echo 'a1 == 1' > events/kprobes/ev/filter BUG: KASAN: slab-use-after-free in strcmp+0xa7/0xb0 Call Trace: strcmp trace_find_event_field parse_pred process_preds create_filter apply_event_filter event_filter_write field->name references parg->name (kstrdup'd, freed with the probe) and, for array arguments, field->type references parg->fmt (kmalloc'd, freed with the probe) - the scalar type otherwise points at the static fmttype rodata, which is safe. Have traceprobe_define_arg_fields() duplicate the name and type strings and anchor the copies on the trace_probe_event, which embeds the event call and outlives every individual probe; trace_probe_event_free() releases them. The reproducer above triggers reliably; the field lookup and the delete both run under event_mutex, so this is a dangling reference after removal rather than a race. The issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab.
In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: cope with concurrent instance destruction Instances are refcounted. However, only memory release happens on the 1 -> 0 transition; the unlink from hashes can occur with any refcount. Uncooperative userspace can force a situation where a queue is pending for destruction from netlink event while a different socket with same portid processes an UNBIND request. With right timing, this will unhash the instance again: Oops: general protection fault, [..] Call Trace: <TASK> nfulnl_recv_config+0x31a/0xd50 nfnetlink_rcv_msg+0x7c2/0xeb0
In the Linux kernel, the following vulnerability has been resolved: vhost/vdpa: reject VRING_NUM larger than device max vhost_vring_set_num() accepts any non-zero power-of-two queue size that fits in 16 bits. vhost-vdpa then passes that value to set_vq_num() without comparing it with get_vq_num_max(). A process with access to /dev/vhost-vdpa-* can therefore configure a queue larger than the device advertises. With vdpa_sim, the worker can walk descriptors beyond the mapped descriptor ring. KASAN reports a 16-byte out-of-bounds read, corresponding to one vring_desc, in the vringh IOTLB path: BUG: KASAN: out-of-bounds in _copy_from_iter Read of size 16 copy_from_iotlb copydesc_iotlb vringh_getdesc_iotlb vdpasim_net_work Cache get_vq_num_max() immediately after reset. Some backends derive it from writable queue-size state, so querying it after SET_NUM may return the current size instead of the device capability. Invalidate the cached value before reset so a failed reset leaves SET_NUM disabled. For VHOST_SET_VRING_NUM, copy the complete vring state once and use the same index and size for validation, vq->num, and set_vq_num(). This ensures that validation and use operate on the same copied values.
In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: don't install the eventfd_ctx_fdget() error in config_ctx vhost_vdpa_set_config_call() swaps the eventfd_ctx_fdget() return value into v->config_ctx before checking it, so on failure the field briefly holds an ERR_PTR: ctx = fd == VHOST_FILE_UNBIND ? NULL : eventfd_ctx_fdget(fd); swap(ctx, v->config_ctx); if (!IS_ERR_OR_NULL(ctx)) eventfd_ctx_put(ctx); if (IS_ERR(v->config_ctx)) { long ret = PTR_ERR(v->config_ctx); v->config_ctx = NULL; return ret; } Commit 0bde59c1723a ("vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails") added that clearing, and spelled out the invariant the rest of the file relies on: "we consider 'v->config_ctx' valid if it is not NULL". The window between the swap and the clearing still breaks it. vhost_vdpa_config_cb() only tests for NULL, so a config interrupt delivered inside the window hands the ERR_PTR to eventfd_signal(). Check the fd before installing it instead. That closes the window and matches how vhost_vring_ioctl() handles the same failure for the vq call fd. It also stops a rejected fd from tearing down a config interrupt that was working: until now the swap replaced the live context and put it, so after an EBADF the device silently stopped delivering config interrupts until userspace installed a new fd.
In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: protect config_ctx from being freed under the config callback vhost_vdpa_config_cb() loads v->config_ctx and signals it without taking a reference and without holding any lock: struct eventfd_ctx *config_ctx = v->config_ctx; if (config_ctx) eventfd_signal(config_ctx); VHOST_VDPA_SET_CONFIG_CALL replaces that field and drops what is normally the last reference to the old context: swap(ctx, v->config_ctx); if (ctx) eventfd_ctx_put(ctx); eventfd_ctx_put() drops the last kref and frees the context immediately, with no RCU grace period, so a callback that has already loaded the pointer goes on to dereference freed memory. The two sides share no lock: the ioctl runs under vhost_dev.mutex, while the parent invokes the callback from its own interrupt or workqueue context. This is not the reopen refcount underflow fixed by commit f6bbf0010ba0 ("vhost-vdpa: fix use-after-free of v->config_ctx"), which was about vhost_vdpa_config_put() leaving a stale pointer behind. Here the pointer is maintained correctly and it is the read side that is unprotected. With VDUSE as the parent this is reachable from userspace with access to /dev/vduse (root by default). VDUSE_DEV_INJECT_CONFIG_IRQ queues dev->inject, and vduse_dev_irq_inject() runs the callback under VDUSE's own dev->irq_lock, which vhost does not hold. vduse_dev_reset() does flush_work(&dev->inject), but VHOST_VDPA_SET_CONFIG_CALL never goes through reset, so an inject already in flight is not waited for. A process that injects config interrupts on the VDUSE fd while another thread swaps the call fd on the vhost-vdpa fd hits it in seconds: BUG: KASAN: slab-use-after-free in native_queued_spin_lock_slowpath Read of size 4 at addr ffff888107d21808 by task kworker/u17:1/2993 Workqueue: vduse-irq vduse_dev_irq_inject Call Trace: native_queued_spin_lock_slowpath+0x97/0x5b0 _raw_spin_lock_irqsave+0xd4/0xe0 eventfd_signal_mask+0x69/0x120 vhost_vdpa_config_cb+0x34/0x50 vduse_dev_irq_inject+0x46/0x60 process_one_work+0x468/0x950 Allocated by task 2992: do_eventfd+0x50/0x200 __x64_sys_eventfd2+0x2e/0x40 Freed by task 2992: eventfd_ctx_put+0xb9/0xc0 vhost_vdpa_unlocked_ioctl+0x116c/0x2190 Add a spinlock covering every access to config_ctx, so the callback either signals a context that is still alive or observes NULL, and the put happens only once no callback can reach the old value. Clearing the parent's callback before the put would not be enough: of the in-tree set_config_cb() implementations only VDUSE takes a lock, the rest store the pointer unlocked, so that would not order against an in-flight invocation.
In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Remove debugfs entries when probe fails ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. If hwmon_device_register_with_info() fails right after it, ccp_probe() returns without removing them: the HID core then frees ccp, and ccp_remove() is not called for a failed probe, so the files stay behind. Reading one of them dereferences the freed pointer. Remove the debugfs entries on that error path. debugfs_remove_recursive() waits for readers already inside the show callbacks, so ccp is no longer reachable through debugfs by the time probe returns.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: reset HTB scheduler topology before freeing queues HTB offload programs NIX_AF_TLxX_TOPOLOGY on QoS-allocated scheduler queues via otx2_qos_txschq_set_parent_topology(), but teardown freed those queues without clearing TOPOLOGY. The AF only restores PARENT and SCHEDULE on free, so PRIO_ANCHOR/RR_PRIO settings can survive in the shared scheduler pool and affect later allocations. Add otx2_qos_reset_schq_topology() and otx2_qos_free_hw_schq() to zero TL4 through TL2 TOPOLOGY before each schq is returned to the AF during hierarchy teardown and cfg rollback. Skip the aggregation level (TL1): it is a per-tx-link queue shared by the PF, default Tx hierarchy and VFs, and is not freed back to the AF by nix_txschq_free_one().
In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix user-space data loss with MADV_FREE and THP Some of users of Polars (a data analytics library) have lost production data from this bug. They seem to have just the right combination of huge pages, MADV_FREE and heavy reclaim pressure. pmd_modify() masks the old value with (_HPAGE_CHG_MASK & ~_PAGE_DIRTY), silently discarding the hardware dirty bit. The subsequent pmd_mksaveddirty() call is supposed to transfer _PAGE_DIRTY into _PAGE_SAVED_DIRTY when write-protecting, but the dirty bit was already stripped from the value, so there is nothing left to transfer. Contrast with pte_modify(), which keeps _PAGE_DIRTY_BITS in its mask, and pud_modify(), which keeps _HPAGE_CHG_MASK untouched: pmd_modify() is the odd one out. Any pmd_modify() on a writable, dirty PMD loses the dirty state. One visible consequence is data loss with MADV_FREE on PMD-mapped THP: memset(buf, 0x5A, size); // PMD-mapped THP, PMD dirty madvise(buf, size, MADV_FREE); // PMD cleaned but left writable, // folio marked lazyfree memset(buf, 0x5A, size); // hardware sets _PAGE_DIRTY again mprotect(buf, size, PROT_READ); // pmd_modify() drops the dirty bit mprotect(buf, size, PROT_READ|PROT_WRITE); // ... memory pressure ... Reclaim (e.g. under memcg pressure) then finds the lazyfree folio with no dirty bit set anywhere and frees it in __discard_anon_folio_pmd_locked(), even though the data was rewritten after MADV_FREE; subsequent reads fault in fresh zero pages. NUMA hinting alone can trigger the same loss, as do_huge_pmd_numa_page() restores the PMD through pmd_modify() as well. PMD-mapped file THPs are affected too: mprotect()/NUMA hinting dropping the dirty bit means rewritten data is never written back. Fix it by keeping _PAGE_DIRTY in the preserved mask, exactly like pte_modify() and pud_modify() do. The existing pmd_mksaveddirty()/pmd_clear_saveddirty() pair then performs the hardware-dirty <-> saved-dirty transition based on the write bit, preserving the shadow-stack encoding rules.
In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory corruption from the histogram stacktrace modifier parse_field() sets HIST_FIELD_FL_STACKTRACE from the ".stacktrace" modifier before it looks the field name up, and nothing afterwards checks that the name resolved to a field which holds a stacktrace. create_hist_field() picks HIST_FIELD_FN_STACK on the strength of the field pointer alone, which reads a __data_loc word from the record and follows its low 16 bits as an offset into the same record. event_hist_trigger() takes the first word there as an entry count and copies that many longs into a 31 entry array: n_entries = *stack; memcpy(entries, ++stack, n_entries * sizeof(unsigned long)); Neither end of that copy is bounded, and the count is whatever the event holds at the offset, so any field will do: # cd /sys/kernel/tracing/events/sched/sched_process_fork # echo 'hist:keys=parent_pid.stacktrace' > trigger # (true) BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:rb_insert_color+0x18/0x130 timerqueue_linked_add+0x7e/0xd0 enqueue_hrtimer+0x39/0xb0 __hrtimer_run_queues+0x10f/0x1f0 </IRQ> RIP: 0010:memcpy+0xc/0x30 event_hist_trigger+0x165/0x690 The timer interrupt landed on the rbtree the copy had already run over. No debug options are needed for this; KASAN reports the same write as an out-of-bounds read of 13835058055416381440 bytes. Documentation/trace/histogram.rst already states the rule, "must be a long[] type", so enforce it once the name has been resolved. Names which resolve to no field at all, "hitcount.stacktrace" and the common_* pseudo-fields, are refused for the same reason: they hold no stacktrace to read.
In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: fix in04_last array size mismatch with in04_buf The in04_last array in struct usx2ydev is declared as char[24], but in04_buf is allocated as sizeof(struct us428_ctls) which is 21 bytes. In i_usx2y_in04_int(), when ctl_snapshot_last == -2 (initialization path): memcpy(usx2y->in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last)); This copies 24 bytes from a 21-byte slab allocation, reading 3 bytes past the end of the source object. Introduce a USX2Y_IN04_SIZE constant defined as sizeof(struct us428_ctls) and use it consistently for the in04_last array, the in04_buf allocation, the URB transfer length, and the comparison loop, replacing the bare 24 and 21 literals throughout.
In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: validate URB actual_length in interrupt callback i_usx2y_in04_int() processes the interrupt URB data without checking urb->actual_length. A short transfer from a malfunctioning device would cause the handler to process uninitialized heap data from the kmalloc-allocated in04_buf, which is then copied to the mmap-accessible ctl_snapshot[] array. Fix by using kzalloc() for in04_buf to zero-initialize the buffer, and adding an actual_length check to skip processing on short transfers while still resubmitting the URB.
In the Linux kernel, the following vulnerability has been resolved: ufs: create the root dentry after loading cylinder metadata ufs_fill_super() installed sb->s_root before it loaded the cylinder group structures for a writable mount: sb->s_root = d_make_root(inode); ... if (!sb_rdonly(sb)) if (!ufs_read_cylinder_structures(sb)) goto failed; When ufs_read_cylinder_structures() failed, the error path freed the in-core superblock information and set sb->s_fs_info to NULL while sb->s_root stayed installed. get_tree_bdev() then reached deactivate_locked_super(), and because s_root was present, generic_shutdown_super() called sync_filesystem() and the put_super operation. Both dereference UFS_SB(sb), which is now NULL, so a mount that fails only while reading the cylinder groups oopses during teardown. A crafted image whose first cylinder group cannot be read reaches this path. Load the cylinder group metadata first and create the root dentry last, so the superblock is published to the VFS only once it is fully set up. ufs_setup_cstotal() and ufs_read_cylinder_structures() take only the super_block and do not use the root inode, so the reordering is safe.
In the Linux kernel, the following vulnerability has been resolved: tick/broadcast: Plug clockevents replacement race 朱恺乾 reported and decoded the following race condition when a broadcast device is replaced: CPUA CPUB __tick_broadcast_oneshot_control() bc = tick_broadcast_device.evtdev; tick_install_broadcast_device(dev) clockevents_exchange_device(cur, dev) shutdown(cur); detach(cur); cur->handler = noop; tick_broadcast_device.evtdev = dev; tick_broadcast_set_event(bc, next_event); <- FAIL: arms a detached device. If the original broadcast device has a restricted interrupt affinity mask and the last CPU in that mask goes offline then the BUG() in tick_cleanup_dead_cpu() triggers because the clockevent device is not in detached state. The reason for this is that tick_install_broadcast_device() is not serialized vs. tick broadcast operations. The obvious cure is to serialize tick_install_broadcast_device() with tick_broadcast_lock against a concurrent tick broadcast operation. That requires to split clockevents_exchange_device() into two parts, one which does the exchange, shutdown and detach operation and the other which drops the module reference count. This is required because the module reference cannot be dropped while holding tick_broadcast_lock. Let clockevents_exchange_device() do both operations as before, but let the broadcast device code take the two step approach and do the device exchange under tick_broadcast_lock and drop the module reference count after releasing it.
In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Don't destroy fields when event removal fails destroy_user_event() destroys the event's fields before attempting to remove the trace event call. If user_event_set_call_visible() fails, e.g. because the event is still enabled and trace_remove_event_call() returns -EBUSY, the event is left registered with an irreversibly destroyed field list. Any subsequent interaction with the event then operates on an empty field list while it is still fully visible in tracefs. Move the field destruction after the call removal, and splice the field list back onto the event when the removal fails so the event remains in a consistent state.
In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram the var ref when its initialization fails create_var_ref() allocates a VAR_REF hist_field and then calls init_var_ref() to fill it in. When that fails the field is leaked. commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy var_refs") made destroy_hist_field() return early for HIST_FIELD_FL_VAR_REF, since var refs are freed by walking the trigger's var_refs[] array instead. create_var_ref() adds the field to that array only after init_var_ref() has succeeded, so on this path the field is in neither place and nothing frees it. The call was correct when it was written, before var refs were taken out of destroy_hist_field(). init_var_ref() cannot free it either. The caller owns the field, so init_var_ref() undoes only its own string allocations and leaves the field alone. Freeing it there would leave create_var_ref() passing freed memory to destroy_hist_field(), which reads its flags. Call __destroy_hist_field(), which frees the field without consulting the flag.
In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram var refs regardless of how often they are referenced Using the same variable three or more times in one hist trigger leaks the variable reference and its strings when the trigger is removed. commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy var_refs") made a trigger's var_refs[] array the only owner of a var ref: destroy_hist_field() returns early for HIST_FIELD_FL_VAR_REF, so the field expressions never destroy one. One entry, freed once, no count needed. commit 8bcebc77e85f ("tracing: Fix histogram code when expression has same var as value") then made repeated references share one object and added a count of them. Only the increment side exists, since those expressions still return early and never drop a reference, so __destroy_hist_field() sees how many references were created rather than how many are left. It frees when the decremented count is 0 or 1, so two references work and three or more leak. Sharing kept one array entry per object, and create_var_ref() searches and appends within a single trigger, so nothing outside it holds the object. Removing a trigger whose variables are still referenced is already refused by check_var_refs() with -EBUSY. Drop the count and free unconditionally.
In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram the field rejected for a bad modifier Writing a hist trigger whose value or variable carries a modifier that is not allowed there leaks the fields that were built for it. __create_val_field() takes the field from parse_expr() and stores it in hist_data->fields[] only after the modifier checks have run: hist_field = parse_expr(hist_data, file, field_str, flags, var_name, &n_subexprs); ... if (hist_field->flags & HIST_FIELD_FL_VAR) { if (hist_field->flags & (...)) goto err; } else { if (hist_field->flags & (...)) goto err; } hist_data->fields[val_idx] = hist_field; Both checks jump past that store, and the err label returns without freeing anything. The error unwinds to create_hist_data(), which calls destroy_hist_data() -> destroy_hist_fields(), and that reaches a field only by walking fields[]. A field that never got there is unreachable. commit e0213434fe3e ("tracing: Do not let histogram values have some modifiers") set ret to -EINVAL and fell through to the store, which left the field owned by fields[] and freed along with the rest of hist_data. Splitting the check into a value case and a variable case replaced that fall-through with a goto that skips it. With CONFIG_DEBUG_KMEMLEAK, 200 writes of # echo 'hist:keys=prev_pid:vals=next_pid.log2' > \ events/sched/sched_switch/trigger each correctly rejected with -EINVAL, leave 332 unreferenced objects (63744 bytes) reported at create_hist_field(); 200 install and remove cycles of a valid trigger leave none. A '.log2' field is two allocations, since create_hist_field() puts the plain field in operands[0] of the log2 field, and both are reported. Use destroy_hist_field() rather than __destroy_hist_field() so that operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF, which is what an operand owned by hist_data->var_refs[] needs; the rejected field itself is never a var ref, because a var ref never carries a modifier flag.
In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the entry count when the histogram stats allocation fails print_entries() uses n_entries both as the number of sort entries and as its own return value, so the -ENOMEM it stores when the stats allocation fails overwrites the count that the cleanup still needs: n_entries = tracing_map_sort_entries(map, ...); if (n_entries < 0) return n_entries; ... if (!stats) { n_entries = -ENOMEM; goto out; } ... out: tracing_map_destroy_sort_entries(sort_entries, n_entries); tracing_map_destroy_sort_entries() takes an unsigned int and loops up to it, so -ENOMEM arrives as 4294967284. It walks an array of at most map->max_elts pointers and calls destroy_sort_entry(), which dereferences and frees, on whatever lies past the end. Reading the hist file of a trigger with a .percent value, with that allocation forced to fail: BUG: KASAN: vmalloc-out-of-bounds in tracing_map_destroy_sort_entries+0xa0/0xb0 Read of size 8 at addr ffffc90000045000 by task init/1 tracing_map_destroy_sort_entries+0xa0/0xb0 hist_show+0x6f7/0x1df0 seq_read_iter+0x2b8/0x1190 vfs_read+0x176/0xa40 The buggy address belongs to a 4-page vmalloc region starting at ffffc90000041000 allocated at tracing_map_sort_entries+0x5c/0xd50 A few pages further the fault is fatal. The registers at the oops confirm the bound: the loop's end pointer less the array start, over the pointer size, is 4294967284. Return the error in a separate variable and leave n_entries holding the count, the way tracing_map_sort_entries() does on its own error path. The stats block is only entered for a value carrying .percent or .graph, which __create_val_field() has rejected since v6.3, so this cannot be reached in mainline as it stands. It becomes reachable again with "tracing: hist: let values keep the percent and graph modifiers", so it should be applied first.
In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr Add a size parameter to ivpu_to_cpu_addr() and validate that the whole [vpu_addr, vpu_addr + size) range stays within the BO.
In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate firmware log buffer metadata The tracing log headers parsed by fw_log_print_buffer() reside in DMA-shared BOs that the NPU firmware can write to. fw_log_from_bo() validated log->header_size and log->size, but fw_log_print_buffer() re-read those same fields from shared memory afterwards, allowing a TOCTOU where firmware changes them between the check and the use, and making the host dereference out-of-bounds addresses while printing logs. Snapshot the validated values once with READ_ONCE() and pass them down explicitly in a new struct ivpu_fw_log_desc instead of re-reading them from the shared struct.
In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Limit firmware log name prints to field size The name in struct vpu_tracing_buffer_header is a fixed-size array populated by the NPU firmware. It is expected to be NUL-terminated, but nothing on the host side enforces this, so printing it with an unbounded string conversion would read past the field if the terminator is ever missing and expose adjacent bytes of the shared tracing BO through dmesg and the debugfs FW log output. Print at most as many characters as the name field holds, so the output never runs past it even if the string is not NUL-terminated.
In the Linux kernel, the following vulnerability has been resolved: ASoC: sti: initialize IRQ lock before requesting IRQ uni_reader_init() registers the shared IRQ before initializing reader->irq_lock. A pending interrupt can invoke the handler while the lock is still uninitialized. Initialize the lock before registering the IRQ so the interrupt path always sees valid lock state.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev The command and ACL RPMsg endpoints store struct btqcomsmd as their callback private data. The receive callbacks dereference btq->hdev without taking an hci_dev reference. The current teardown order frees the hci_dev before destroying the RPMsg endpoints in both the hci_register_dev() error path and the driver remove path. If WCNSS delivers data in that window, the endpoint callback can run with an already freed hci_dev and pass it to the Bluetooth core. For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears the callback under the channel recv_lock. The receive path holds the same lock while invoking the callback, so destroying the endpoints first both prevents new callbacks and serializes with any callback already running. Destroy the command and ACL endpoints before hci_free_dev(). Keep hci_unregister_dev() first during remove so the HCI core stops issuing operations before the transport endpoints are shut down. In the full registration-error cleanup path, return directly after freeing the hci_dev to avoid falling through to the partial-construction labels and destroying the endpoints twice.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: Don't leak return code when parsing firmware format v2 When key_id from chip is zero, rtlbt_parse_firmware_v2() intentionally ignores all security headers. However, the implementation simply breaks from a switch statement and leaks uninitialized return code `rc' (if the first section is a security one) or the previous section's `rc'. Fix it by really skipping a loop with `continue'. For consistency and readability, also do the same for the default case.
In the Linux kernel, the following vulnerability has been resolved: cpufreq: zero-initialize policy cpumask before sysfs publication cpufreq_policy_alloc() allocates policy->cpus with alloc_cpumask_var(), i.e. without __GFP_ZERO, unlike the sibling related_cpus and real_cpus masks. With CONFIG_CPUMASK_OFFSTACK=y the mask is a separate kmalloc_node() allocation, so its bitmap holds whatever the slab allocator left behind: cpufreq_online() cpufreq_policy_alloc() alloc_cpumask_var(&policy->cpus) /* bitmap is uninitialized */ kobject_init_and_add() /* policy%u/ appears in sysfs */ cpufreq_policy_online() cpumask_copy(policy->cpus, cpumask_of(cpu)) /* first valid value */ This leaves a window in which the sysfs attributes are already reachable while policy->cpus is still garbage. show()/store() gate on policy_is_inactive(), i.e. cpumask_empty(policy->cpus), so a non-zero bitmap makes them run the attribute callbacks on a policy that is not initialized yet. Fix this by using zalloc_cpumask_var() for policy->cpus.
In the Linux kernel, the following vulnerability has been resolved: cpufreq: initialize policy rwsem before sysfs publication cpufreq_policy_alloc() initializes policy->rwsem after kobject_init_and_add() has created the policy sysfs directory and its default attributes. A sysfs access can therefore reach a policy callback before the semaphore has been initialized. Initialize policy->rwsem before publishing the policy kobject so sysfs callbacks always see an initialized semaphore.
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: release all action references on NEWACTION failure When a batched RTM_NEWACTION request replaces an existing action, tcf_idr_check_alloc() takes a temporary reference on it. If a later action fails to initialize, tcf_action_destroy() uses strict release semantics to clean up the actions initialized so far. For an action bound to a filter, the strict check returns -EPERM without dropping the temporary reference. This error also makes tcf_action_destroy() return before releasing subsequent entries. Any new action initialized between the bound action and the failing entry is leaked together with its reserved IDR slot, preventing reuse of its index. Use tcf_idr_release() to drop each reference held by the batch without rejecting bound actions. This allows cleanup to continue through all initialized entries and preserves the module reference release when an action is destroyed. Explicit action deletion and flushing retain their separate bind-count checks.
In the Linux kernel, the following vulnerability has been resolved: net: mana: Reserve extra CQ slot for the fence completion CQE The RX completion queue is sized to hold exactly one CQE per posted RX WQE. MANA_FENCE_RQ makes hardware post an additional CQE_RX_OBJECT_FENCE after the packet CQEs. The current sizing reserves no extra slot for it and in rare cases, CQ has no guaranteed slot for the fence CQE when it is full of packet CQEs. This can lead to dropping the fence completion while the driver waits holding RTNL lock throughout the timeout duration. Reserve one extra CQE slot for CQE_RX_OBJECT_FENCE. mana_gd_alloc_memory() requires queue_size to be a power-of-two and at least MANA_PAGE_SIZE; the reservation pushes cq_size past a power-of-two, so round up the CQ size in mana_create_rxq().
In the Linux kernel, the following vulnerability has been resolved: vdpa: ifcvf: Put device on unsupported feature error Route unsupported provisioned features through the common error path after vdpa_alloc_device() so the allocated device and adapter pointer are released consistently.
In the Linux kernel, the following vulnerability has been resolved: erofs: preserve LZMA decoders on resize failure The pool-resize path frees each stream's old decoder before allocating its replacement. If an allocation fails after some streams have already been replaced, the failed stream is put back on the list with state == NULL. z_erofs_lzma_max_dictsize is still advanced as if the whole pool had been resized. An existing LZMA mount can select the broken stream and pass NULL to xz_dec_microlzma_reset(). A retry at the same size also skip another resize attempt. Since the global maximum was advanced, thus, the invalid state is left unrepaired. Allocate each replacement before freeing the old decoder, temporarily retaining one old decoder during allocation. Stop at the first failure and advance z_erofs_lzma_max_dictsize only after all streams satisfy the request. Record each stream's dictionary capacity so retries can skip streams already enlarged before a partial failure.
In the Linux kernel, the following vulnerability has been resolved: fbdev: vfb: defer cleanup until the last reference FBIOGETCMAP takes a shallow snapshot of info->cmap and performs the usercopy after dropping info->lock. vfb_remove() frees the colormap immediately after unregistering the framebuffer, even when an open file still holds a reference to fb_info. A concurrent driver unbind can therefore free the colormap while the ioctl copies it to userspace. KASAN reports: BUG: KASAN: slab-use-after-free in _copy_to_user Read of size 512 by task poc/125 _copy_to_user (./include/linux/instrumented.h:129 ./include/linux/uaccess.h:201 lib/usercopy.c:24) fb_cmap_to_user (./include/linux/uaccess.h:230 drivers/video/fbdev/core/fbcmap.c:211) do_fb_ioctl (drivers/video/fbdev/core/fb_chrdev.c:114) Allocated by task 1: fb_alloc_cmap_gfp (./include/linux/slab.h:973 ./include/linux/slab.h:1290 drivers/video/fbdev/core/fbcmap.c:108) vfb_probe (drivers/video/fbdev/vfb.c:459) Freed by task 124: fb_dealloc_cmap (drivers/video/fbdev/core/fbcmap.c:151) vfb_remove (drivers/video/fbdev/vfb.c:489) unregister_framebuffer() drops the registration reference, and fbdev calls fb_destroy after the last put_fb_info(). Move the registered framebuffer's cleanup into an fb_destroy callback so its colormap and screen buffer stay alive until all file references have been released.
In the Linux kernel, the following vulnerability has been resolved: ieee802154: 6lowpan: fix NULL dereference in lowpan_newlink TUNSETLINK allows a TUN device to change its link-layer type to ARPHRD_IEEE802154 without initializing ieee802154_ptr. lowpan_newlink() checks only the device type before dereferencing the pointer, so an RTM_NEWLINK request can trigger a NULL pointer dereference. Reject devices without ieee802154_ptr along with devices of the wrong type.
In the Linux kernel, the following vulnerability has been resolved: ieee802154: cc2520: fix FIFOP work use-after-free The FIFOP interrupt handler queues cc2520_fifop_irqwork. On removal, cc2520_remove() only flushes the work. The devm-managed FIFOP IRQ remains active until after ->remove() returns and can queue the work again after that flush, allowing it to run after the private data is released. Disable the work with disable_work_sync() instead of flushing it, so the handler can no longer queue it once removal begins. Destroy the buffer mutex last, since the worker and the stop callback invoked through ieee802154_unregister_hw() both take it. Found by an in-house static analysis tool.
In the Linux kernel, the following vulnerability has been resolved: ieee802154: hwsim: serialize pib updates to fix double-free hwsim_update_pib() does an unserialized read-swap-free of phy->pib: pib_old = rtnl_dereference(phy->pib); ... rcu_assign_pointer(phy->pib, pib); kfree_rcu(pib_old, rcu); It assumes the RTNL is held, but ->set_channel is not always called under it: the mac802154 scan worker changes channels via drv_set_channel() without the RTNL. Such an update can race an RTNL-held one on the same phy; both read the same pib_old and both kfree_rcu() it, double-freeing the object. With SLUB percpu sheaves batching kfree_rcu(), this surfaces as a KASAN invalid-free in rcu_free_sheaf(). struct hwsim_phy has no lock for pib. Add one and make the swap atomic with rcu_replace_pointer() under it, dropping the misleading rtnl_dereference().
In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: bound automatic table ID allocation fib_empty_table() probes every table ID from 1 until it finds a free one. IPv4 tables are stored in a 256-bucket hash table, so a dense set of IDs makes each probe walk a growing hash chain while RTNL is held. Automatic table assignment ("ip rule ... table 0") is an IPv4-only legacy path. Bound the automatically allocated ID to 4096 so the RTNL hold stays bounded, without changing lookups of explicitly specified table IDs. This changes user-visible behavior. A table-0 rule previously received the lowest free ID in 1..RT_TABLE_MAX (0xFFFFFFFF). After this patch the search stops at 4096 and the rule add fails with ENOBUFS if that range is fully occupied. Explicit table IDs above 4096 remain usable. The automatic path is unused in practice: it is IPv4-only, not documented by ip-rule, uncovered by kernel selftests, and both NetworkManager and systemd refuse table 0.
In the Linux kernel, the following vulnerability has been resolved: ipvs: reject invalid states in connection template sync records IPVS sync receivers validate protocol states before creating or updating a connection. For connection templates, however, they only log states outside the template state range and still store the value in the connection. A template can be returned by ordinary connection lookup. TCP and SCTP then use the invalid state as an index into their transition tables. Reject invalid template states in both sync protocol versions before looking up or modifying a connection. The version 1 path handles both IPv4 and IPv6 records.
In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix missing scrub of temp buffers with AES ctr and gcm algorithm In function ctr_aes_crypt() there is a buffer used to process remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and thus could lead to expose of unwanted data. When the buffer is used explicitly scrub it at the end of the code block to avoid exposure of maybe sensitive data. In a similar way the function gcm_aes_crypt() hat an error path where the CPACF param block was not scrubbed. Instead of return early now these error paths go to end of function where explicit scrubbing is done. Similar with the buffers which are part of the gcm_sg_walk structs from the variables gw_in and gw_out.
In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: store available counter mask as bitmap The available-counter mask was a single unsigned long, but iteration uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object. Filling with an unsigned-long bit at index 32 and above is also wrong. Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word into CFG_MATCH when checking events, when allocating an index, and when stopping all counters. Set the counter base to i times BITS_PER_LONG. Share the CFG_MATCH ecall through a small helper so the 32-bit argument split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits above XLEN set, so the first word alone is not enough. [pjw@kernel.org: updated to apply; fixed checkpatch.pl issues]
In the Linux kernel, the following vulnerability has been resolved: hwmon: (gpio-fan) Fix use-after-free in alarm work fan_alarm_irq_handler() queues fan_data->alarm_work, but nothing cancels it. fan_alarm_notify() dereferences fan_data and its hwmon device. On unbind, devres frees the interrupt, which only waits for the handler itself, and then releases the hwmon device and fan_data, so a pending fan_alarm_notify() can run after those frees. Replace INIT_WORK() with devm_work_autocancel(), registered before devm_request_irq(). The devres cleanup then frees the interrupt first, so no new work can be queued, and cancels the work while fan_data and the hwmon device are still alive. This issue was found by an in-house static analysis tool.
In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: hantro: bound G2 HEVC tile loop to the buffer capacity prepare_tile_info_buffer() writes one entry per tile into the tile_sizes DMA buffer, sized for a grid equal to the PPS uAPI array capacity. Use the bounded v4l2_hevc_pps_num_tile_columns() / v4l2_hevc_pps_num_tile_rows() helpers so the loops stay inside the buffer.
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Propagate RX ring init failures in bnxt_init_nic() bnxt_init_rx_rings() returns an error when bnxt_alloc_one_rx_ring() fails, but bnxt_init_nic() discards that return value and calls bnxt_init_chip(), which enables TPA. If an allocation fails, this could leave rxr->rx_tpa[] partially zeroed and TPA would be enabled over an array with zeroed entries. This would lead to a zeroed DMA address being handed out if the agg_idx is translated to a SW index at a zeroed entry. Fix this by propagating the error out of bnxt_init_nic(). Both callers already check its return value and unwind with bnxt_free_skbs() and bnxt_free_mem(), which tolerate a partially initialized RX ring.
In the Linux kernel, the following vulnerability has been resolved: mptcp: syncookies: remember the request backup flag Instead of using an uninitialised bit when copying the info in subflow_ulp_clone(). To fix this, no need to extend the join_entry structure: backup is coming from struct mptcp_subflow_request_sock, only one bit. Do the same here by using one bit for both.
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.idmap descriptions cifs.idmap key descriptions carry authority-bearing fields (owner and group SIDs and uid/gid values in "os:"/"gs:"/"oi:"/"gi:" form) that the cifs.idmap upcall helper treats as kernel-originating inputs. Unlike its sibling cifs.spnego, the cifs.idmap key type has no vet_description hook, so userspace can create keys of this type through request_key(2)/add_key(2) and supply those fields without CIFS origin. A request_key(2) call with a non-NULL callout then drives a root usermodehelper upcall (/sbin/request-key -> cifs.idmap) that consumes the unvetted description in root context. Only accept cifs.idmap descriptions while CIFS is using its private root_cred to request the key. id_to_sid()/sid_to_id() already run under override_creds(root_cred), so the kernel-originated path is unaffected. This mirrors commit 3da1fdf4efbc ("smb: client: reject userspace cifs.spnego descriptions"), which applied the same restriction to cifs.spnego.
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix one-byte OOB read in smb2_parse_native_symlink() When parsing a share-root relative native symlink, memcpy copies smb_target+1 (skipping the leading separator) but uses strlen(smb_target)+1 as the length, reading one byte past the allocated buffer. This fixes the following KASAN splat when accessing an SMB symlink with a target of '\a\b': BUG: KASAN: slab-out-of-bounds in smb2_parse_native_symlink+0x4f5/0xca0 Read of size 5 at addr ffff88800878fe21 by task netfsfuzz-execu/1 CPU: 1 UID: 0 PID: 1 Comm: netfsfuzz-execu Tainted: G N 7.2.0-11943-g2709dd5ae32f-dirty #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996) Call Trace: <TASK> dump_stack_lvl+0x7b/0xa0 print_report+0xd0/0x630 kasan_report+0xe5/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 smb2_parse_native_symlink+0x4f5/0xca0 parse_reparse_point+0x68a/0x1530 reparse_info_to_fattr+0x752/0xa20 cifs_get_fattr+0x873/0x15b0 cifs_get_inode_info+0xc0/0x310 cifs_lookup+0x308/0xa70 __lookup_slow+0x122/0x2b0 lookup_slow+0x50/0x70 path_lookupat+0x525/0xaf0 filename_lookup+0x1f2/0x550 vfs_statx+0xd1/0x1a0 vfs_fstatat+0x65/0xc0 __do_sys_newfstatat+0x9a/0x120 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid leaking refcount when cifs_sb_tlink() fails cifs_oplock_break() takes over the reference that cifs_queue_oplock_break() acquired when it queued the work, and drops it with _cifsFileInfo_put() once the break has been processed. Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which point cifs_oplock_break() returns without putting the file reference, mirroring the reference leak we already fixed in the companion patch to cifs_queue_oplock_break(). This would trigger a crash due to busy inodes on the next unmount: BUG: Dentry ... still in use (1) [unmount of cifs cifs] VFS: Busy inodes after unmount of cifs (cifs) Drop the reference on that path as well. Doing so before the out label mirrors the normal path, which also puts the reference before cifs_done_oplock_break(). Found by Sashiko code review. The failure path was not exercised at runtime.
In the Linux kernel, the following vulnerability has been resolved: xfs: initialise error in xfs_defer_finish_one() xfs_defer_finish_one() declares error without an initialiser and only assigns it inside the loop over dfp->dfp_work. When that list is empty the loop body never runs, control falls through to the "Done with the dfp, free it" path, and the function returns an indeterminate value. An item-less pending item reaches this through xfs_defer_add_barrier(), which xfs_reap_ag_blocks() uses on any CONFIG_XFS_ONLINE_REPAIR kernel. xfs_defer_finish_noroll() treats any non-EAGAIN return as fatal, so a non-zero stack value turns a successful barrier into a SHUTDOWN_CORRUPT_INCORE in the middle of a repair. Zero is the correct result: reaching the free path means the item loop drained without a non-zero error.
In the Linux kernel, the following vulnerability has been resolved: xfs: initialise args->total for parent pointer updates xfs_parent_da_args_init() builds an xfs_da_args from a zeroed xfs_parent_args (kmem_cache_zalloc), leaving args->total == 0. xfs_da_grow_inode_int() treats that field as a running block reservation and subtracts from it; because it is an xfs_extlen_t (uint32_t), the first attr-fork growth wraps it to ~0U. That defeats the free-space check in xfs_alloc_space_available(), and when it coincides with an AG that has exactly zero available blocks the allocation is clamped to maxlen 0 and returns -ENOSPC, which xfs_defer_finish_noroll() escalates to a filesystem shutdown. Set args->total the way the log recovery path does (xfs_attri_recover_work(), xfs_attr_item.c:706), in the add and replace paths that can grow the fork. Removals and lookups never grow it, so they leave the field alone, matching that switch.
In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN When exchanging two full-file ranges, xmi_can_exchange_reflink_flags() can move the reflink inode flag from the file that currently has it to the other file, as long as exactly one side is marked. This assumes that the file contents, and therefore all shared extents, are exchanged. That assumption is not true when XFS_EXCHMAPS_INO1_WRITTEN is set. xfs_exchmaps_can_skip_mapping() can skip hole and unwritten mappings from file1, so an exchange can complete without moving every mapping that the earlier flag-swap decision accounted for. In that case the post-operation cleanup can clear the reflink flag from an inode that still owns shared written extents. Later writes then take the non-reflink write path and may update blocks that should still have been protected by CoW, which shows up as data corruption between reflink-related files. Fix this by disabling the reflink flag exchange whenever XFS_EXCHMAPS_INO1_WRITTEN is requested. The contents exchange can still proceed; the conservative outcome is that both inodes keep the reflink flag. The regular reflink flag cleanup path can drop the extra flag later once the inode no longer has shared extents.
In the Linux kernel, the following vulnerability has been resolved: xfs: don't spin forever on zero-length dirents when salvaging them LOLLM noticed that xrep_dir_recover_data can spin forever if it encounters an unused dirent that claims to have length zero. Fix that, and prevent the same thing from happening with a zero-length entry.