In the Linux kernel, the following vulnerability has been resolved: drm/imagination: fix error checking of pvr_vm_context_lookup() Since pvr_vm_context_lookup() returns either NULL or a pointer, then stop using IS_ERR() for checking the return value. Using IS_ERR() leads to the kernel oops reported below. It can be reproduced by passing an invalid VM context handle from userspace to the DRM_IOCTL_PVR_CREATE_CONTEXT ioctl. [ 92.733119] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000148 [ 92.742042] Mem abort info: [ 92.744890] ESR = 0x0000000096000004 [ 92.748686] EC = 0x25: DABT (current EL), IL = 32 bits [ 92.754020] SET = 0, FnV = 0 [ 92.757154] EA = 0, S1PTW = 0 [ 92.760337] FSC = 0x04: level 0 translation fault [ 92.765243] Data abort info: [ 92.768129] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 92.773626] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 92.778763] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 92.784098] user pgtable: 4k pages, 48-bit VAs, pgdp=000000088ed23000 [ 92.790550] [0000000000000148] pgd=0000000000000000, p4d=0000000000000000 [ 92.797381] Internal error: Oops: 0000000096000004 [#1] SMP [ 92.803027] Modules linked in: powervr [ 92.852533] CPU: 0 UID: 0 PID: 409 Comm: triangle Not tainted 7.1.0-rc5-g98b46e693b91 #1 PREEMPT [ 92.861385] Hardware name: Texas Instruments AM68 SK (DT) [ 92.866766] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 92.873709] pc : pvr_vm_get_fw_mem_context+0x0/0xc [powervr] [ 92.879376] lr : pvr_queue_create+0x26c/0x440 [powervr] [ 92.884595] sp : ffff8000837fbb00 [ 92.887895] x29: ffff8000837fbb60 x28: 0000000000000000 x27: ffff8000837fbce8 [ 92.895015] x26: ffff000807f61a40 x25: ffff000807f61a00 x24: ffff000807f64400 [ 92.902135] x23: ffff00080a5ab000 x22: ffff800079b24730 x21: ffff000807f61800 [ 92.909254] x20: ffff00080999e680 x19: 0000000000000000 x18: 0000000000000000 [ 92.916373] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001 [ 92.923492] x14: 0000000000000000 x13: 0000000000000002 x12: ffff80008145b298 [ 92.930611] x11: ffff8000844e5000 x10: ffff80008165a130 x9 : 0000000000000100 [ 92.937730] x8 : 0000000000000001 x7 : ffff0008076b27e0 x6 : ffff00080ec43b7c [ 92.944850] x5 : ffff00080ec43b78 x4 : 0000000000000000 x3 : ffff00080999e680 [ 92.951968] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 92.959088] Call trace: [ 92.961521] pvr_vm_get_fw_mem_context+0x0/0xc [powervr] (P) [ 92.967173] pvr_context_create+0x190/0x410 [powervr] [ 92.972218] pvr_ioctl_create_context+0x44/0x8c [powervr] [ 92.977608] drm_ioctl_kernel+0xbc/0x124 [drm] [ 92.982127] drm_ioctl+0x1f8/0x4dc [drm] [ 92.986098] __arm64_sys_ioctl+0xac/0x104 [ 92.990102] invoke_syscall+0x54/0x10c [ 92.993842] el0_svc_common.constprop.0+0x40/0xe0 [ 92.998532] do_el0_svc+0x1c/0x28 [ 93.001835] el0_svc+0x38/0x11c [ 93.004969] el0t_64_sync_handler+0xa0/0xe4 [ 93.009139] el0t_64_sync+0x198/0x19c [ 93.012792] Code: aa1703e0 d2800014 95cb0ba4 17ffffe8 (f940a400) [ 93.018869] ---[ end trace 0000000000000000 ]---
In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Account for NULL and handle pages in ttm_pool_backup Pages in ttm_pool_backup can be NULL or backup handles (ttm_backup_page_ptr_is_handle()), neither of which can be passed to set_pages_array_wb() or freed. Add a dedicated WB pass before the dma/purge loop that walks allocations using the same i += num_pages stride, skipping NULL and handle entries, and calls set_pages_array_wb() once per contiguous run of real pages. Apply the same NULL/handle guard to the dma/purge loop. Fixes the following oops: Oops: general protection fault, kernel NULL pointer dereference 0x0: 0000 [#1] SMP NOPTI RIP: 0010:__cpa_process_fault+0xf8/0x770 RSP: 0018:ffffc90000a87718 EFLAGS: 00010287 RAX: 0000000000000000 RBX: ffffc90000a87868 RCX: 0000000000000000 RDX: 0000000000001000 RSI: 0005088000000000 RDI: ffffffff827c5f34 RBP: 0005088000000000 R08: ffffc90000a877cb R09: ffffc90000a877d0 R10: 0000000000000000 R11: 000000000000001b R12: 000ffffffffff000 R13: ffffc90000a87868 R14: ffffc90000a87868 R15: ffff88815b882ae0 FS: 0000000000000000(0000) GS:ffff8884ec840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f930b844000 CR3: 000000000262e003 CR4: 0000000008f70ef0 PKRU: 55555554 Call Trace: <TASK> __change_page_attr_set_clr+0x989/0xe90 ? __purge_vmap_area_lazy+0x6c/0x3a0 ? _vm_unmap_aliases+0x250/0x2a0 set_pages_array_wb+0x7f/0x120 ttm_pool_backup+0x4c9/0x5b0 [ttm] ? dma_resv_wait_timeout+0x3b/0xf0 ttm_tt_backup+0x32/0x60 [ttm] ttm_bo_shrink+0x66/0x110 [ttm] xe_bo_shrink_purge+0x12b/0x1b0 [xe] xe_bo_shrink+0xbb/0x270 [xe] __xe_shrinker_walk+0xf7/0x160 [xe] xe_shrinker_walk+0x9d/0xc0 [xe] xe_shrinker_scan+0x11f/0x210 [xe] do_shrink_slab+0x13b/0x270 shrink_slab+0xf1/0x400 shrink_node+0x352/0x8a0 balance_pgdat+0x32c/0x700 kswapd+0x205/0x2f0 ? __pfx_autoremove_wake_function+0x10/0x10 ? __pfx_kswapd+0x10/0x10 kthread+0xd1/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x1b1/0x200 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: fix indefinite fence wait during GPU reset pre_reset only force-completes fences of MAPPED queues. A queue in any other state (e.g. mid-eviction) keeps its last_fence pending; after a GPU reset that fence never signals, so the eviction/suspend worker and process teardown (amdgpu_evf_mgr_flush_suspend) wait on it forever and wedge the machine: INFO: task kworker/6:28 blocked for more than 120 seconds. Workqueue: events amdgpu_eviction_fence_suspend_worker [amdgpu] Call Trace: dma_fence_wait_timeout+0x7e/0x130 amdgpu_userq_evict+0x67/0x140 [amdgpu] amdgpu_eviction_fence_suspend_worker+0xd8/0x160 [amdgpu] process_scheduled_works+0xa6/0x420 Force-complete every queue's fence regardless of state. The unmap and mark-hung step stays gated on MAPPED, since unmapping a queue that is not mapped is invalid. (cherry picked from commit 9102b39fa924dcc3dc75a3137bfa9633c40b88c0)
In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: Fix MM reference leak in drm_gpusvm_range_evict If kvmalloc_array() fails in drm_gpusvm_range_evict(), the MM reference acquired earlier is not released, resulting in a reference leak. Fix this by dropping the MM reference on the kvmalloc_array() failure path.
In the Linux kernel, the following vulnerability has been resolved: media: cx231xx: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the driver state lifetime so that it is released on driver unbind.
In the Linux kernel, the following vulnerability has been resolved: media: i2c: alvium: fix critical pointer access in alvium_ctrl_init The current implementation of alvium_ctrl_init creates several controls in function alvium_ctrl_init and uses the returned pointer without check. That can cause write access over NULL-pointer for several controls. The reworked code checks the pointers before adding flags.
In the Linux kernel, the following vulnerability has been resolved: media: mali-c55: Fix possible ERR_PTR in enable_streams The media_pad_remote_pad_unique() function returns either a valid pointer or an ERR_PTR() on failure (-ENOTUNIQ if multiple links are enabled, -ENOLINK if no connected pad is found). The return value was assigned directly to isp->remote_src and dereferenced in the next line without checking for errors, which could lead to an ERR_PTR dereference. Add proper error checking with IS_ERR() before dereferencing the pointer. Also set isp->remote_src to NULL on error to maintain consistency with other error paths in the function.
In the Linux kernel, the following vulnerability has been resolved: media: nuvoton: npcm-video: fix memory leaks in probe and remove npcm_video_probe() allocates the npcm_video structure with kzalloc_obj() but never frees it on any probe error path or in npcm_video_remove(), leaking the allocation on every failed probe and every normal unbind. Additionally, when npcm_video_setup_video() fails, the reserved memory association established by of_reserved_mem_device_init() in npcm_video_init() is not released, leaking the rmem_assigned_device entry on the global list. Fix both by adding kfree(video) to all probe error paths and to npcm_video_remove(), and adding the missing of_reserved_mem_device_release() call when npcm_video_setup_video() fails.
In the Linux kernel, the following vulnerability has been resolved: media: stm32-dcmipp: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. dcmipp_bytecap_start_streaming() returned -EINVAL when the source subdevice could not be resolved from the media graph, before pm_runtime_resume_and_get() and media_pipeline_start() had been called. The remaining error paths already converge on the err_buffer_done label, which calls dcmipp_bytecap_all_buffers_done(..., VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate err_pm_put / err_media_pipeline_stop labels are skipped, which is correct because nothing they would undo has happened yet. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure").
In the Linux kernel, the following vulnerability has been resolved: media: ti: vpe: Fix the error code of devm_kzalloc() in vip_probe_slice() In vip_probe_slice(), the error check for devm_kzalloc() incorrectly uses PTR_ERR_OR_ZERO() which returns 0 for NULL pointer. Return -ENOMEM for devm_kzalloc() failure.
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: drop TXRX_NOTIFY on non-mmio buses PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus. mt7925_mac_tx_free() cleans the DMA tx queues with mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the mmio queue ops implement that callback; on USB it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX worker: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:0x0 Call Trace: mt7925_mac_tx_free+0x58/0x350 [mt7925_common] mt7925_rx_check+0xe2/0x130 [mt7925_common] mt76u_rx_worker+0x1b9/0x620 [mt76_usb] Drop the event on non-mmio buses via mt76_is_mmio(), as in commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for non-mmio devices").
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL pointer dereference in rhash table destroy When unbinding the ath12k driver, kernel NULL pointer dereferences occur in irq_work_sync() called from rhashtable_destroy(). Two hash tables are affected: 1. ath12k_link_sta hash table in ath12k_base 2. ath12k_dp_link_peer hash table in ath12k_dp The issue happens because the destroy functions are called unconditionally in cleanup paths, but the hash tables are only initialized late in their respective init functions. If the device was never fully started or if the init functions failed before initializing the hash tables, the pointers will be NULL. The issues are always reproducible from a VM because the MSI addressing initialization is failing. Call trace for ath12k_link_sta_rhash_tbl_destroy: RIP: irq_work_sync+0x1e/0x70 rhashtable_destroy+0x12/0x60 ath12k_link_sta_rhash_tbl_destroy+0x19/0x40 [ath12k] ath12k_core_stop+0xe/0x80 [ath12k] ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k] ath12k_pci_remove+0x60/0x110 [ath12k] Call trace for ath12k_dp_link_peer_rhash_tbl_destroy: RIP: irq_work_sync+0x1e/0x70 rhashtable_destroy+0x12/0x60 ath12k_dp_link_peer_rhash_tbl_destroy+0x29/0x50 [ath12k] ath12k_dp_cmn_device_deinit+0x21/0x140 [ath12k] ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k] ath12k_pci_remove+0x60/0x110 [ath12k] Fix this by adding NULL checks before calling rhashtable_destroy() in both destroy functions. The NULL check approach was chosen because the rhashtable pointer serves as the initialization state indicator. The init can fail at various points, leaving some components uninitialized. Checking the pointer directly is simpler than adding separate state flags that would need synchronization.
In the Linux kernel, the following vulnerability has been resolved: tracing: Fix union collision of module and refcnt for dynamic events In 'struct trace_event_call', the 'module' pointer and the 'refcnt' atomic variable share the same memory space in a union. For dynamic events, the union member is 'refcnt', which acts as an active reference counter. When a dynamic event (such as kprobe, uprobe, fprobe, eprobe, or wprobe) has a non-zero reference count (e.g. due to active event triggers or perf attachments), its 'call->module' evaluates to a small non-zero integer instead of NULL. When filtering or setting events for a specific module (e.g., writing ':mod:<module>' to 'set_event'), the code in '__ftrace_set_clr_event_nolock()' and 'update_event_fields()' reads 'call->module' directly without checking whether the event is dynamic. This causes the kernel to treat the small integer (refcnt) as a 'struct module' pointer, leading to a NULL/invalid pointer dereference (Oops) when dereferencing the module name. Fix this by ensuring that the 'TRACE_EVENT_FL_DYNAMIC' flag is checked before treating 'call->module' as a valid pointer in these code paths.
In the Linux kernel, the following vulnerability has been resolved: arm64: syscall: Ensure saved x0 is kept in-sync with tracer updates When seccomp support was originally added to arm64 in a1ae65b21941 ("arm64: add seccomp support"), seccomp was erroneously called _before_ the ptrace syscall-enter-stop and therefore the tracer could trivially manipulate the syscall register state after the seccomp check had passed. This was subsequently fixed in a5cd110cb836 ("arm64/ptrace: run seccomp after ptrace") by moving the seccomp check after the tracer has run. Unfortunately, a decade later, that fix has been reported to be incomplete. On arm64, both the first argument to a syscall and its eventual return value are allocated to register x0. In order to facilitate syscall restarting and querying of syscall arguments on the syscall exit path, the original value of x0 is stashed in 'struct pt_regs::orig_x0' early during the syscall entry path and is returned for the first argument by syscall_get_arguments(). Unlike 32-bit Arm, this stashed value is not directly exposed via ptrace() and so changes to register x0 made by the tracer on a syscall-enter-stop are not reflected in 'orig_x0'. This means that seccomp, syscall tracepoints and audit can observe a stale value for the register compared to the argument that will be observed by the actual syscall. Re-sync 'orig_x0' from x0 on the syscall entry path following a potential ptrace stop (i.e. PTRACE_EVENTMSG_SYSCALL_ENTRY or SECCOMP_RET_TRACE). This behaviour is limited to native tasks (because compat tasks expose 'orig_r0' to ptrace) where the syscall is not being skipped (because x0 is updated to hold the return value of -ENOSYS in that case).
In the Linux kernel, the following vulnerability has been resolved: afs: Fix afs_edit_dir_remove() to get, not find, block 0 Fix afs_edit_dir_remove() to use afs_dir_get_block() to get block 0 rather than afs_dir_find_block() as the latter caches the found block in the afs_dir_iter and may[*] switch out the page it's on if another afs_dir_find_block() is done. This parallels what afs_edit_dir_add() does. [*] There's more than one block per page.
In the Linux kernel, the following vulnerability has been resolved: btrfs: do not try compression for data reloc inodes [BUG] There is a syzbot report that the check inside get_new_location() triggered: BTRFS info (device loop0): found 31 extents, stage: move data extents BTRFS info (device loop0): leaf 8908800 gen 16 total ptrs 28 free space 1676 owner 18446744073709551607 item 0 key (256 INODE_ITEM 0) itemoff 3835 itemsize 160 inode generation 5 transid 0 size 0 nbytes 0 block group 0 mode 40755 links 1 uid 0 gid 0 rdev 0 sequence 0 flags 0x0 atime 1669132761.0 ctime 1669132761.0 mtime 1669132761.0 otime 0.0 item 1 key (256 INODE_REF 256) itemoff 3823 itemsize 12 index 0 name_len 2 item 2 key (258 INODE_ITEM 0) itemoff 3663 itemsize 160 inode generation 1 transid 16 size 733184 nbytes 106496 block group 0 mode 100600 links 0 uid 0 gid 0 rdev 0 sequence 24 flags 0x18 item 3 key (258 EXTENT_DATA 0) itemoff 3595 itemsize 68 generation 16 type 0 inline extent data size 47 ram_bytes 4096 compression 1 [...] item 27 key (18446744073709551611 ORPHAN_ITEM 258) itemoff 2376 itemsize 0 BTRFS error (device loop0): unexpected non-zero offset in file extent item for data reloc inode 258 key offset 0 offset 9277520992061368337 ------------[ cut here ]------------ btrfs_abort_should_print_stack(__error) [CAUSE] The above dump tree shows the first file extent item is inlined, which should make no sense for data reloc inodes, as such inodes just represent where the data extents are in the relocation destination chunk. However the relocation path preallocates space for each block, then dirties them, cluster by cluster. It's possible to have a single block at the beginning of the block group, and no other block in the same cluster. So relocation will preallocate a file extent for that block and dirty the first block. Then memory pressure forces the data reloc inode to be written back, before any other blocks are dirtied/allocated. Finally commit 3eaf5f082c4c ("btrfs: extract inlined creation into a dedicated delalloc helper") changed the sequence of delalloc. Before that commit we always tried NOCOW first, so that dirtied block would be written back into the preallocated space, and appear as a regular extent. But with that commit, we always try inline first, and since compression is forced, we try compressing the first block, and then inline the compressed data, resulting in the above inlined file extent in the data reloc tree. Then the check in get_new_location() will check the file offset, without checking if the file extent is inlined or not, resulting in the above failure. [FIX] Do not allow compression for data reloc inodes. Since data reloc inode sizes are always block aligned, as long as we do not compress, @data_len will always be at least one block, and that will cause can_cow_file_range_inline() to return false, thus no inlined extent will be created.
In the Linux kernel, the following vulnerability has been resolved: fs/super: fix emergency thaw double-unlock of s_umount do_thaw_all() iterates over all superblocks via __iterate_supers() with SUPER_ITER_EXCL, which acquires s_umount exclusively before calling the callback and releases it afterwards. However, the callback do_thaw_all_callback() calls thaw_super_locked() which unconditionally releases s_umount on every code path. This results in a second unlock attempt in __iterate_supers() that corrupts the rwsem state, triggering a DEBUG_RWSEMS warning: [ 182.601148] sysrq: Emergency Thaw of all frozen filesystems [ 182.601865] ------------[ cut here ]------------ [ 182.602375] DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)): count = 0x0, magic = 0xffff99b1011e5870, owner = 0x0, curr 0xffff99b101b06c80, list not empty [ 182.603817] WARNING: kernel/locking/rwsem.c:1412 at up_write+0xa3/0x170, CPU#2: kworker/2:1/53 [ 182.604578] Modules linked in: [ 182.604864] CPU: 2 UID: 0 PID: 53 Comm: kworker/2:1 Not tainted 7.2.0-rc4-00001-gbd3bd93ea98a-dirty #4 PREEMPT(lazy) [ 182.605711] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1kylin1 04/01/2014 [ 182.606417] Workqueue: events do_thaw_all [ 182.606750] RIP: 0010:up_write+0xaf/0x170 [ 182.607076] Code: 19 3a 92 48 0f 44 c2 48 8b 55 08 48 8b 55 00 4c 8b 45 08 48 8b 55 00 48 8d 3d ad 91 e0 01 48 8b 4d 20 50 48 c7 c6 f0 8c 26 92 <67> 48 0f b9 3a e8 d7 93 4e 00 58 eb 81 48 83 7f 18 00 48 c7 c2 8d [ 182.608563] RSP: 0018:ffffb670001d7e08 EFLAGS: 00010246 [ 182.609007] RAX: ffffffff92349e8d RBX: 0000000000000000 RCX: ffff99b1011e5870 [ 182.609595] RDX: 0000000000000000 RSI: ffffffff92268cf0 RDI: ffffffff92914d10 [ 182.610283] RBP: ffff99b1011e5870 R08: 0000000000000000 R09: ffff99b101b06c80 [ 182.610847] R10: ffff99b10139a808 R11: fefefefefefefeff R12: 0000000000000000 [ 182.611414] R13: ffffffff90cf74d0 R14: 0000000000000000 R15: ffff99b1011e5800 [ 182.612009] FS: 0000000000000000(0000) GS:ffff99b1eaaee000(0000) knlGS:0000000000000000 [ 182.612670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 182.613146] CR2: 00000000005c631c CR3: 00000000013ee000 CR4: 00000000000006f0 [ 182.613722] Call Trace: [ 182.613946] <TASK> [ 182.614130] __iterate_supers+0x128/0x150 [ 182.614463] do_thaw_all+0x1b/0x30 [ 182.614759] process_scheduled_works+0xbb/0x3f0 [ 182.615150] ? __pfx_worker_thread+0x10/0x10 [ 182.615499] worker_thread+0x129/0x270 [ 182.615816] ? __pfx_worker_thread+0x10/0x10 [ 182.616201] kthread+0xe2/0x120 [ 182.616469] ? __pfx_kthread+0x10/0x10 [ 182.616792] ret_from_fork+0x15b/0x240 [ 182.617115] ? __pfx_kthread+0x10/0x10 [ 182.617426] ret_from_fork_asm+0x1a/0x30 [ 182.617761] </TASK> [ 182.617968] ---[ end trace 0000000000000000 ]--- [ 182.618412] Emergency Thaw complete Fix this by switching to SUPER_ITER_UNLOCKED and acquiring s_umount in the callback via super_lock_excl() before calling thaw_super_locked(). This matches the locking pattern expected by thaw_super_locked() and eliminates the double unlock. While at it, remove the dead 'return;' at the end of do_thaw_all_callback().
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Use sender devcom for MPV master-up After PCIe DPC recovery, mlx5 reloads the affected functions and replays multiport affiliation events. In the reported failure, the first relevant device error was: pcieport 0000:10:01.1: DPC: containment event pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal) pcieport 0000:10:01.1: [ 5] SDES (First) mlx5 recovered the PCI functions and resumed 0000:11:00.1. During that resume, RDMA multiport binding replayed MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent MPV_DEVCOM_MASTER_UP. The host then panicked with: BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] RDI: 0000000000000000 Call trace included: mlx5_devcom_comp_set_ready mlx5e_devcom_event_mpv mlx5_devcom_send_event mlx5_ib_bind_slave_port mlx5r_mp_probe mlx5_pci_resume MPV devcom registration publishes mlx5e private data to the component peer list before mlx5e_devcom_init_mpv() stores the returned component device in priv->devcom. A concurrent master-up event can therefore reach a peer whose private data is visible but whose priv->devcom backpointer is still NULL. MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private data as event_data. The ready bit is stored on the shared devcom component, not on an individual peer. Use the sender devcom when marking the MPV component ready. This preserves the readiness transition while avoiding a NULL dereference of the peer devcom pointer during affiliation replay after PCI error recovery.
In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP Call Trace during PTP release If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will result in the following PTP release call trace during driver unload: kernel BUG at lib/list_debug.c:52! ice_ptp_release+0x332/0x3c0 [ice] ice_deinit_features.part.0+0x10e/0x120 [ice] ice_remove+0x100/0x220 [ice] This was observed when passing PF1 through to a VM. ice_ptp_init() fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT. Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and returning without error, preventing the invalid state transition to ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from ICE_PTP_RESETTING after a failed rebuild.
In the Linux kernel, the following vulnerability has been resolved: ovpn: fix peer refcount leak in TCP error paths When either the TCP RX or TX error path calls ovpn_peer_hold() followed by schedule_work(&peer->tcp.defer_del_work), and the work item is already pending from the other path, schedule_work() returns false and the work runs only once. Since ovpn_tcp_peer_del_work() calls ovpn_peer_put() exactly once, the extra reference taken by the losing path is never dropped, leaking the peer object. The race window: CPU0 (strparser/RX error): CPU1 (tcp_tx_work/TX error): ovpn_peer_hold() <- refcnt+1 ovpn_peer_hold() <- refcnt+2 schedule_work() <- queued schedule_work() <- NO-OP (work already pending) ovpn_tcp_peer_del_work runs: ovpn_peer_del() ovpn_peer_put() <- refcnt+1 <- peer never freed Fix by checking the return value of schedule_work() in both paths and calling ovpn_peer_put() to drop the extra reference if the work was already pending. ovpn_peer_hold() is kept unconditional in the TX path as it cannot fail at that point.
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix check in amdgpu_hmm_invalidate_gfx For a short moment during alloc/free the userptr BO is not part of his VM, so bo->vm_bo can be NULL. Keep a reference to the VM root PD as parent of the userptr BO so that we can always use that to wait for all submissions of the VM instead of only the one involving the userptr BO. (cherry picked from commit 631849ff5d603841e74f19f4a5e30fe1f7d7cf30)
In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix race between registration and connection abortion This fixes this race: - thread a: io_uring_enter -> register sqe -> fuse_uring_create_ring_ent -> allocate ent but doesn't grab queue_ref yet - thread b: fuse_conn_destroy() -> fuse_chan_abort() -> fuse_uring_abort() is a no-op due to queue ref being 0 - thread a: grabs the queue_ref, queue_ref is now 1, rest of fuse_uring_do_register() logic executes - thread b: fuse_chan_abort() returns, fuse_chan_wait_aborted() now runs and calls "wait_event(ring->stop_waitq, atomic_read(&ring->queue_refs) == 0);" The abort/unmount thread will hang indefinitely in unkillable state as nothing will decrement queue_refs or wake stop_waitq, and the ring, queue, and ent are leaked. Fix this by checking fch->connected under fch->lock after the created ent has grabbed a ref count on the queue. This ensures that in the scenario above, it is guaranteed that we either release the queue ref and wake up stop_waitq (in case fuse_chan_wait_aborted() is already waiting) in fuse_uring_do_register() when we detect !fch->connected, or if the connection is aborted after the check, it is guaranteed that the async teardown worker will be running in the background cleaning up ents and decrementing the ent's ref on the queue, which will unblock the eventual queue and ring teardown.
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Preserve rq tracking across local DSQ dispatch dispatch_to_local_dsq() can run from scx_bpf_dsq_move_to_local() while ops.dispatch() has recorded the current rq. Moving a task to a local DSQ may switch to the source or destination rq before synchronously invoking ops.dequeue() through the following path: SCX_CALL_OP(dispatch, rq) ops.dispatch() scx_bpf_dsq_move_to_local() scx_flush_dispatch_buf() finish_dispatch() dispatch_to_local_dsq() scx_dispatch_enqueue() local_dsq_post_enq() call_task_dequeue() SCX_CALL_OP_TASK(dequeue, locked_rq, ...) The nested callback saves the recorded rq and restores it on return. If the rq tracking does not follow the lock switch, update_locked_rq() can trigger the following lockdep assertion while restoring an rq which is no longer held: WARNING: kernel/sched/sched.h:1641 at call_task_dequeue+0x160/0x170 Call Trace: scx_dispatch_enqueue+0x2b0/0x460 dispatch_to_local_dsq+0x138/0x230 scx_flush_dispatch_buf+0x1af/0x220 scx_bpf_dsq_move_to_local___v2+0xe2/0x1c0 bpf__sched_ext_ops_dispatch+0x4b/0xa7 do_pick_task_scx+0x3b6/0x910 __pick_next_task+0x105/0x1f0 __schedule+0x3e7/0x1980 Introduce switch_rq_lock() to update the tracking state together with each rq lock handoff. Use it in dispatch_to_local_dsq(), move_remote_task_to_local_dsq() and the in-balance paths of scx_dsq_move(), ensuring that scx_locked_rq() consistently refers to the rq whose lock is actually held throughout the lock dance.
In the Linux kernel, the following vulnerability has been resolved: time/jiffies: Register jiffies clocksource before usage Teddy reported that a XEN HVM has a long boot delay, which was bisected to the recent enhancements to the negative motion detection. It turned out that the jiffies clocksource is used in early boot before it is registered, which leaves the max_delta_raw field at zero. That causes the read out to be clamped to the max delta of 0, which means time is not making progress. Cure it by ensuring that it is initialized before its first usage in timekeeping_init().
In the Linux kernel, the following vulnerability has been resolved: iio: core: fix uninitialized data in debugfs If *ppos is non-zero then simple_write_to_buffer() will not initialize the start of buf[]. Non zero values for *ppos aren't going to work anyway. Test for them at the start of the function and return -EINVAL.
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush() wacom_wac_queue_flush() is called via the .raw_event callback (wacom_raw_event → wacom_wac_pen_serial_enforce → wacom_wac_queue_flush). For USB HID devices, this callback is invoked from hid_irq_in(), which is a URB completion handler running in atomic context. Using GFP_KERNEL in this path can sleep, leading to a "scheduling while atomic" bug. Use GFP_ATOMIC instead. The existing code already handles allocation failure by skipping the fifo entry and continuing.